Mode content analysis from intensity measurements in a few cross sections of oversized waveguides

A method of mode content analysis in oversized waveguides basing on intensity measurements in a few cross sections is suggested. The method is based on iterative synthesis of phase fronts of the radiation measured in a few cross sections of an oversized waveguide. The phase reconstruction makes it possible to calculate field distribution as well as the mode content at any place of the waveguide. The method was tested in experiments with circular and rectangular waveguides with impedance corrugation of the walls [8].     

Mode content analysis from intensity measurements in a few cross sections of oversized waveguides

A method of mode content analysis in oversized waveguides basing on intensity measurements in a few cross sections is suggested. The method is based on iterative synthesis of phase fronts of the radiation measured in a few cross sections of an oversized waveguide. The phase reconstruction makes it possible to calculate field distribution as well as the mode content at any place of the waveguide. The method was tested in experiments with circular and rectangular waveguides with impedance corrugation of the walls [8].     

Propagation and radiation characteristics of the circular electric, circular magnetic and hybrid waveguide modes

The field distributions and propagation constants of the circular electric, circular magnetic and hybrid modes of oversized waveguides are expressed, taking the effects of walls into account. These effects are described by wall functions which depend on surface impedances of the wall, and are determined for different types of guides. The near and far field patterns are derived in the case of real wall functions. It is shown that, for very oversized waveguides, the terms containing wall functions can be ignored in the calculations, and it results that the expressions of fields and propagation constants become independent of the types of waveguides. An application to corrugated waveguides for Electron Cyclotron Resonance Heating experiments shows the variations of the radiation characteristics versus geometric parameters of the corrugations and determines the ranges of interest for these parameters.     

金属包层对称平面单轴晶体波导的模式场(Ⅱ)

对于晶体光轴平行于波导界面的结构,讨论了光在金属包层对称平面单轴晶体波导(波导层是单轴晶体,两个波导界面均为金属)内的传输特性.解析地得到了这种结构下波导模式场的精确解.模式场的性质因单轴晶体的性质不同而异.对于正单轴晶体,波导的主模是横电波,任何频率的光波均可激励该模式;当频率满足一定条件时,波导内传输单模,否则,将激励起高阶模式.高阶模既非TE波,也非TM波,而是两者耦合而成的混合模.对于负单轴晶体,波导的主模是一种混合模,该模式同样可被任何频率的光波所激励;当频率满足一定条件时,波导内传输单模,否则 关键词： 平面金属波导 单轴晶体 模式场 混合模     

Transverse mode competition in defect states of a waveguide with corrugated walls

We investigate the defect states arising in the Bragg and non-Bragg gaps by inserting a straight duct into a waveguide with periodically corrugated walls. In periodic waveguides, the Bragg gap is created by the interference of the same transverse modes whereas the different mode coupling leads to the non-Bragg one. Due to the involved high-order modes, there are two defect states observed in the non-Bragg gap while only one in the Bragg gap, indicating that transverse modes play a significant role in the creation of defect states. Furthermore, the frequency of each defect state highly relies on the defect geometries and their band widths can be optimized by the number of waveguide segments. The proposed transverse mode competition analysis reveals the mechanism of frequency shifting and provides an opportunity for guided wave control engineering, which would definitely benefit their applications in various functional devices, such as filters, sensors, and amplifiers.     

Analysis of Oversized Sliding Waveguide by Mode Matching and Multi-Mode Network Theory

Transmission and reflection coefficients of hybrid modes in the sliding waveguide are discussed on the basis of mode matching method and multi-mode network theory. It is confirmed that the decrease in power of < 0.2% at 84 GHz is obtained for 2 cm in gap of the sliding waveguide which is composed of the corrugated waveguide with 88.9 mm diam. and the smooth-wall waveguide with 110 mm diam. At the sliding length near multi-half-wavelength in vacuum, transmission and reflection powers in the sliding waveguide change slightly, because the very small amount of standing wave in high higher-mode is produced resonantly in the gap.     

Hybrid Modes in Highly Oversized Corrugated Rectangular Waveguides

Using a scattering matrix formalism the relative TE/TM eigenmode contents of hybrid modes in oversized corrugated rectangular waveguides has been calculated. The influences of slot depth and corrugation period on the eigenmode mixture have been examined.     

A magnetically tunable non-Bragg defect mode in a corrugated waveguide filled with liquid crystals

A magnetically tunable, non-Bragg defect mode (NBDM) was created in the terahertz frequency range by inserting a defect in the middle of a periodically corrugated waveguide filled with liquid crystals (LCs). In the periodic waveguide, non-Bragg gaps beyond the Bragg ones, which appear in the transmission spectra, are created by different transverse mode resonances. The transmission spectra of the waveguide containing a defect showed that a defect mode was present inside the non-Bragg gap. The NBDM has quite different features compared to the Bragg defect mode, which includes more complex, high-order guided wave modes. In our study, we filled the corrugated waveguide with LCs to realize the tunability of the NBDM. The simulated results showed that the NBDM in a corrugated waveguide filled with LCs can be used in filters, sensors, switches, and other terahertz integrated devices.     

9.4 GHz过模光滑壁TE11HE11模式变换器设计

采用半径微扰的光滑壁圆波导产生HE11模,避免了常规微波领域中采用的波纹渐变转换器在高功率微波领域应用时易发生齿间打火的不足。采用基于模式耦合理论的迭代综合方法优化了不规则的半径渐变轮廓,使输出产生组成HE11模的混合模式。并通过全电磁波仿真软件进行了对比, 输出波束标量高斯含量在9.1~9.7 GHz范围内均高于99.5%,功率容量4.9 GW。     

Peculiarities of electron-beam interaction with waves in partially plasma-filled corrugated waveguide

It is shown when the cross-section of a waveguide is partially filled by magnetized plasma, slow and fast E-waves can exist simultaneously at the same frequency, which is lower than the plasma frequency. In the case of spatially periodic corrugation of the waveguide wall, the waves can be coupled, forming new waves with hybrid properties in a certain frequency range. The interaction of an electron beam with the hybrid waves differs from the interaction with a slow plasma wave in a waveguide with smooth walls or with the wave in an evacuated corrugated waveguide. For example, when two waves traveling in the same direction are coupled, the increments of the hybrid waves have values on the order of but somewhat smaller than those of the increment of a slow plasma wave in a smooth waveguide.Moscow Radio-Engineering Institute, Academy of Sciences of the USSR. Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Radiofizika, Vol. 34, No. 7, pp. 825–836, July, 1991.     

Polarization characteristics in optically pumped,far-infrared rectangular waveguide lasers

It has been shown that a linearly polarized, comparatively strong output power can be obtained from optically pumped, far-infrared rectangular waveguide lasers when the rectangular, metallic oversized waveguide is used as a tall guide instead of a standard guide.     

Simplified THz Instrumentation for High-Field DNP-NMR Spectroscopy

We present an alternate simplified concept to irradiate a nuclear magnetic resonance sample with terahertz (THz) radiation for dynamic nuclear polarization (DNP) experiments using the TE(01) circular waveguide mode for transmission of the THz power and the illumination of the DNP sample by either the TE(01) or TE(11) mode. Using finite element method and 3D electromagnetic simulations we demonstrate that the average value of the transverse magnetic field induced by the THz radiation and responsible for the DNP effect using the TE(11) or the TE(01) mode are comparable to that generated by the HE(11) mode and a corrugated waveguide. The choice of the TE(11)/TE(01) mode allows the use of a smooth-walled, oversized waveguide that is easier to fabricate and less expensive than a corrugated waveguide required for transmission of the HE(11) mode. Also, the choice of the TE(01) mode can lead to a simplification of gyrotron oscillators that operate in the TE(0n) mode, by employing an on-axis rippled-wall mode converter to convert the TE(0n) mode into the TE(01) mode either inside or outside of the gyrotron tube. These novel concepts will lead to a significant simplification of the gyrotron, the transmission line and the THz coupler, which are the three main components of a DNP system.     

Electric field in two-dimensional complex plasma crystal:Simulated lattices

We focus on molecular dynamics simulated two-dimensional complex plasma crystals. We use rigid walls as a confinement force and produce square and rectangular crystals. We report various types of two-row crystals. The narrow and long crystals are likely to be used as wigglers; therefore, we simulate such crystals. Also, we analyze the electric fields of simulated crystals. A bit change in lattice parameters can change the internal structures of crystals and their electric fields notably. These parameters are the number of grains, grains charge, length, and width of the crystal. With the help of electric fields, we show the details of crystal structures.     

Design of a TE10-TE30 Rectangular Mode Converter for 4.6GHz LHCD Launcher in the Experimental Advanced Superconducting Tokamak

A compact rectangular TE10-TE30 mode converter is developed for the lower hybrid current drive （LHCD） launcher on the Experimental Advanced Superconducting Tokamak （EAST） at 4.6 GHz. The converter with periodic width perturbation aims to divide the microwave power into three sub-waveguides in the poloidal direction. We present the design and numerical calculation of the mode converter. Calculations are performed on the ripple wall converter by codes based on numerical solving the coupled-mode differential equations and on the simulation of the High Frequency Structure Simulator （HFSS） package. The resulting conversion efficiency from TE10 mode to TE30 mode exceeds 95% within the bandwidth from 4.56 GHz to 4.64 GHz, and the return loss of the oversized transducer can be considerably decreased to 0.068% by means of a capacitive button embedded in the E-plane of the waveguide.     

Long-Range Slot Hybrid Surface Plasmon Waveguide With Long Propagation Distance and Tight Mode Confinement

A long-range hybrid slot surface plasmon waveguiding structure that is capable of achieving ultra-small mode confinement and a long propagation distance simultaneously is proposed in this article. In comparison with the conventional long-range hybrid surface plasmon waveguide, the proposed waveguide can provide one order smaller mode area and a longer propagation distance by introducing a through-slot in the gap region. Meanwhile, the practical fabrication errors have little influence over mode properties of the waveguide. These results indicate that our designed waveguide can be a potential candidate for high-performance nanophotonic circuit and device.     

Optimization of a Frequency Diplexer Based on the Talbot Effect in Oversized Rectangular Waveguides

Calculations of a rectangular waveguide frequency diplexer for high power applications based on the Talbot effect are presented. For the calculation, a method based on analytical approximations, which is valid in highly oversized waveguides, as well as a more accurate mode analysis method are described. The latter allows the integration into an optimization code, which reduces mode conversion losses while maintaining practicable geometrical dimensions.     

Computer-aided analysis and design of corrugated TE11 to HE11 mode converters in highly overmoded waveguides

A theoretical and experimental study of TE11-to-HE11 mode conversion in highly oversized waveguides is given. The balanced HE11 hybrid mode propagating in a circumferentially corrugated circular waveguide is in many respects ideal for effective electron cyclotron resonance heating of fusion plasmas with high-power gyrotrons. At an aperture antenna it exhibits desirable radiation characteristics such as linear polarization with very low cross polarization and axisymmetric power distribution with low sidelobe levels. This Gaussian-like mode can be generated from a TE11 mode by means of a corrugated mode converter in which the depth of the annular slots is tapered gradually from one-half to one-quarter wavelength. Computer-aided optimization of converter length, shape of corrugations, and of non-linear slot depth variation for 28 GHz- and 70 GHz-transducers was achieved with a scattering matrix formalism employing the modal field expansion technique (Modular Analysis Concept). In both cases the measured conversion efficiency of (98.5±0.5)% and the experimental values of the maximum cross polarization (below –28 dB) are in very good agreement with the predicted values. High-power operation was successfully demonstrated using pulsed 28 GHz- and 70 GHz-VARIAN gyrotrons (200 kW).     

矩形截面固体波导中弹性导波模式的板波叠加解

参照板中兰姆波模式的子波叠加解求解了矩形截面固体波导中弹性导波的模式。其中子波设定为横向满足自由边界反射条件、纵向波数分量相同的各板波模式。假设声场的完备性,利用子波模式的正交性,结合矩形截面的几何对称性可以得到4组独立导波特征方程用于频散曲线以及导波模式计算,其计算结果与有限元法计算结果相符。研究以解析模型表明:矩形截面固体波导中的导波是其内部以一定纵向波数分量斜向传播的板波模式在两个自由侧面上经过反复反射与模式转化后,横向耦合谐振而形成的。      

回旋管同轴谐振腔模式的选择

 为了研究回旋管工作模式的选择机理,分析了圆柱波导开放式谐振腔、光滑同轴谐振腔和纵向内开槽同轴谐振腔相应波导的色散特性,进而研究了这些谐振腔内模式竞争的问题。对同轴结构波导色散方程作了相应的数值计算,结果表明,同轴谐振腔利用自身色散曲线与谐振腔内外半径比值的数值关系,能够使在开放式谐振腔内无法工作的高阶模式在其内部稳定工作。最后,以德国卡尔斯鲁厄理工学院(KIT)研制的同轴回旋管为例,进行了相应的分析计算,结果表明纵向内开槽同轴谐振腔相对于光滑同轴谐振腔更适合高阶模式的稳定工作。