Frequency sextupling technique using two cascaded dual-electrode Mach–Zehnder modulators interleaved with Gaussian optical band-pass filter

A frequency sextupling technique for the generation of millimeter-wave (mm-wave) is proposed and investigated. The proposed technique is comprised of two cascaded dual-electrode Mach–Zehnder modulators (MZMs), which are interleaved with Gaussian optical band-pass filter (GOBF). The first MZM, biased at minimum transmission, is only used for optical carrier suppression modulation, and the second MZM, biased at maximum transmission, is used for both even-order optical harmonic generation and data signal modulation. The GOBF between two MZMs is used to suppress the high-order optical harmonics beyond the first-order optical harmonics. On the basis of theoretical analysis and simulated demonstrations, it is concluded that with the use of an RF signal at 10 GHz, which carries the data signal and drives the MZMs, an mm-wave signal at 60 GHz can be obtained. The simulation results show that the proposed sextuple leads to a 7 dB improvement in receiver sensitivity in comparison with the modulation technique, i.e. using two cascaded dual-electrode MZMs without GOBF. Furthermore, the eye diagrams show that the quality of generated mm-wave signal is satisfactory. The proposed technique is verified by experiments.     

Photonic generation of millimeter-wave ultra-wideband signal using phase modulation to intensity modulation conversion and frequency up-conversion

We propose and experimentally demonstrate the generation of a pair of polarity-reversed 24 GHz millimeter-wave (MMW) ultra-wideband (UWB) monocycles. The scheme is realized by using delay interferometer (DI) based phase modulation to intensity modulation (PM–IM) conversion and carrier suppression modulation (CSM) based frequency up-conversion. The phase modulation is realized by using either electro-optic phase modulator (EOPM) or cross phase modulation (XPM) in semiconductor optical amplifier (SOA), which is an all-optical approach to obtaining baseband UWB signals, respectively. After frequency up-converted by using CSM in a Mach–Zehnder modulator (MZM), a pair of polarity-reversed 24 GHz MMW-UWB signals complying with the Federal Communication Committee (FCC) requirements is generated. The bi-phase modulation (BPM) of 24 GHz MMW-UWB signals can also be realized by electrically switching the bias voltage of delay interferometer.     

Novel 60 GHz RoF system with optical single sideband mm-wave signal generation and wavelength reuse for uplink connection

In order to improve RF frequency to achieve higher bandwidth and larger capacity, we propose a novel scheme to generate optical single sideband (SSB) millimeter-wave, in which frequency doubling of local radio frequency (RF) is obtained by using one integrated Mach–Zehnder modulator (MZM), and we theoretically investigate the generating principle of SSB. The optical SSB modulation scheme is employed to generate 60 GHz optical mm-wave and the 2.5 Gb/s baseband signal is simultaneously up-converted at the central station (CS) for downlink transmission, and the optical carrier is reused for uplink connection at the base station (BS). The full-duplex 2.5 Gb/s data are successfully transmitted over 40 km standard single-mode fiber (SMF-28) for both uplink connection and downlink connection with less than 2-dB power penalty. Results show the novel 60 GHz RoF system with optical SSB mm-wave signal generation using optical frequency doubling is feasible and we can obtain simple cost-efficient configuration and good performance over long-distance transmission.     

Frequency quadrupling using an integrated Mach–Zehnder modulator with four arms

In this paper, a novel technique to realize frequency quadrupling in the radio over fiber system is proposed. The frequency quadrupling is achieved by using an integrated Mach–Zehnder modulator (MZM) consisting of a 1 × 4 multimode interference (MMI) coupler and four optical phase modulator arms. Due to the inherent optical splitting ratio and phase relations between the outputs of the MMI coupler, the optical harmonics at + 1 order and ? 3 order are generated corresponding to four times frequency of the microwave drive signal, only by setting the DC bias voltage of the main MZM at the minimum transmission point. That leads to the integrated MZM with reduced complexity compared with the conventional dual-parallel MZM. The effect of the nonideal integrated MZM, including the splitting imbalance and the bias drift, on all the sidebands is also analyzed theoretically. The following simulation results show that the slight deviation of the ideal values would not cause great degradation of the generated optical millimeter-wave signal.     

Optical millimeter-wave signal generation by frequency quadrupling using one dual-drive Mach–Zehnder modulator to overcome chromatic dispersion

We propose a novel approach to generate quadrupling-frequency optical millimeter-wave using a dual-drive Mach–Zehnder modulator (MZM) in radio-over-fiber system. By properly adjusting the phase difference in the two modulation arms of MZM, the direct current (DC) bias, the modulation index and the gain of base-band signal, the quadrupling-frequency optical millimeter-wave with signal only carried by one second-order sideband is generated. As the signal is transmitted along the fiber, there is no time shift of the codes caused by chromatic dispersion. Theoretical analysis and simulation results show that the eye diagram keeps open and clear even when the quadrupling-frequency optical millimeter-wave are transmitted over 110 km and the power penalty is about 0.45 dB after fiber transmission distance of 60 km. Furthermore, due to another second-order sideband carrying no signals, a full duplex radio-over-fiber link based on wavelength reuse is also built to simplify the base station. The bidirectional 2.5 Gbit/s data is successfully transmitted over 40 km standard single mode fiber with less than 0.6 dB power penalty in the simulation.     

A novel MI-insensitive and filterless frequency octupling scheme based on two parallel dual-parallel Mach–Zehnder modulators

A novel MI-insensitive and filterless frequency octupling scheme based on two parallel dual-parallel Mach–Zehnder modulators (DP-MZMs) is proposed. The proposed scheme is not sensitive to modulation index and relatively strong MMW signal with good radio frequency spurious suppression ratio (RFSSR) can be obtained without strict requirement on modulation index. Filterless feature makes the scheme quite suitable for wavelength division multiplexing (WDM) applications. For verification, a 60 GHz millimeter wave with 44 dB RFSSR is generated from a 7.5 GHz radio frequency wave by simulation. Performance of the proposed scheme has been characterized under different conditions including DC-bias drifts of MZMs, different amplitudes of RF inputs and different extinction ratios of MZMs.     

A novel tunable optical oscillator for broadband signals

A tunable optical oscillator that generates signals at the micro- to millimeter-wave band for wireless communication applications is suggested. It uses directly modulated semiconductor lasers, in which sideband modes and four-wave mixing (FWM) conjugate modes are injection locked by the simple control of the applied modulation power. The signals at 15 GHz with phase noise of below ?95 dBc/Hz at an offset frequency of 100 kHz were experimentally obtained. The frequency of the generated signal is tunable, and the maximum achievable signal frequency is limited mainly by the bandwidth of the receiver.     

Millimeter-wave scattering from neutral and charged water droplets

We investigated 94 GHz millimeter-wave (MMW) scattering from neutral and charged water mist produced in the laboratory with an ultrasonic atomizer. Diffusion charging of the mist was accomplished with a negative ion generator (NIG). We observed increased forward- and backscattering of MMW from charged mist, as compared to MMW scattering from an uncharged mist. In order to interpret the experimental results, we developed a model based on classical electrodynamics theory of scattering from a dielectric sphere with diffusion-deposited mobile surface charge. In this approach, scattering and extinction cross-sections are calculated for a charged Rayleigh particle with effective dielectric constant consisting of the volume dielectric function of the neutral sphere and surface dielectric function due to the oscillation of the surface charge in the presence of applied electric field. For small droplets with radius smaller than 100 nm, this model predicts increased MMW scattering from charged mist, which is qualitatively consistent with the experimental observations. The objective of this work is to develop indirect remote sensing of radioactive gases via their charging action on atmospheric humid air.     

Photon Generation Scheme of 32-Fold Millimeter-Wave Signal Based on Mach-Zehnder Modulator

This paper proposes a 32-tupling frequency millimeter-wave (MMW) filter-free system based on four Mach-Zehnder Modulators (MZM) connected in parallel and cascaded with a simple radio-fiber (RoF) link structure. The four MZMs are all at the maximum transmission point (MATP), and the radio frequency (RF) driving voltage phase difference between MZMs is π /2. The center carrier is suppressed by using an optical attenuator (OATT) and an optical phase shifter (OPS). Two parallel MZMs can generate ±8th order and ±12th order optical sidebands, and the ±4th order optical sidebands can be suppressed by adjusting the modulation index m of the MZM, using cascaded two dual-parallel MZMS(DPMZM) and the phase difference of the RF signal source is π/4 to generate ±16th order optical sidebands. The theoretical analysis and simulation experiments are performed for the scheme proposed in this paper. The results show that the simulated and theoretical values of the optical sideband suppression ratio (OSSR) for ±16th order optical sideband signals are 60.02 and 59.96 dB, respectively, and the simulated and theoretical values of the RF sideband suppression ratio (RFSSR) for the 32-tupling MMW signal are 56.34 and 53.94 dB, respectively.     

Improved measurements and analysis of the far-infrared spectrum of methanol-D1 (CH2DOH) arising from trans- (e0) to gauche- (e1 & o1) states

In this work the millimeter-wave (MMW) and far infrared (FIR) absorption spectrum for the asymmetrically deuterated Methanol (CH₂DOH) species measured recently at a temperature of −60 °C with better accuracy and signal/noise (S/N) ratio than known before has been assigned for transitions originating at the lowest lying trans- to gauche-states. The entire spectrum for 50–1200 cm⁻¹ has been re-recorded recently using the Synchrotron Radiation Source coupled with the Bruker Fourier Transform Infrared (FTIR) spectrometer with a resolution of about 0.001 cm⁻¹ or better. Complete spectrum has not been exploited a great deal but it helped to entangle overlapping lines in the present work. This also fills the gap remaining in the usual FTIR in the range 400–500 cm⁻¹. Hence it is expected to help the interacting partner for the Coriolis interaction encountered earlier. The assigned transitions mostly for the axial rotational angular momentum quantum number K + 1 ← K, both for R- and Q-sub bands for wide range of rotational angular momentum quantum number. The MMW spectrum has been recalibrated and assigned for a number of Q-branches. The assignments are confirmed rigorously using closed loop residual technique. The assigned ^rR and ^rQ lines have been analyzed in terms of polynomial expansion parameters. The new assignments are presented for about 750 transitions and a grand atlas of more than 1000 lines has been prepared which will be made available through the open source server at “research gate”. The present work should be useful in the area of astrophysical detection and further understanding of the energy relaxation pathways in the molecule.     

An optical mm-wave generation scheme by frequency octupling using a nested MMI

A novel method of a filterless optical millimeter-wave (MMW) signal generation with frequency octupling via a nested multimode interference (MMI) coupler is proposed for Radio-over-fiber systems. By setting the DC bias voltage applied to the central arms of MMI-b and MMI-c accurately, the optical carrier can be completely suppressed. The OSSR can be as high as about 58 dB without optical filter and the radio frequency spurious suppression ratio (RFSSR) exceeds 32 dB, which is the best result as we know. Simulation results suggest that when the generated optical mm-wave signal is transmitted along the standard single-mode fiber, the eye diagram is still opened after being transmitted over a 50 km fiber.     

Spectral efficient hybrid wireless optical broadband access network (WOBAN) based on transmission of wireless MIMO OFDM signals over WDM PON

In this paper, a spectral efficient hybrid wireless optical broadband access network (WOBAN) is proposed and demonstrated based on the transmission of wireless multi-input multi-output orthogonal frequency division multiplexing (MIMO OFDM) signals over wavelength division multiplexing passive optical network (WDM PON). By using radio over fiber (ROF) techniques, the optical fiber is well adapted to propagate multiple wireless services having different carrier frequencies. It is a known fact that multiple wireless signals having the same carrier frequency cannot propagate over a single optical fiber at the same time, such as MIMO signals feeding multiple antennas in fiber wireless (FiWi) system. A novel optical single-sideband frequency translation technique is designed and simulated to solve this problem. This technique allows four pairs of wireless MIMO OFDM signals with the same carrier frequency for each pair to be transmitted over a single optical fiber by using one optical source per wavelength. The crosstalk between the different MIMO channels with the same frequency is eliminated, since each channel is upconverted on specified wavelength with enough channel spacing between them. Also the maximum crosstalk level between the different MIMO channels with different frequencies is very low around ?76 dB. The physical layer performance of the proposed WOBAN is analyzed in terms of the bit error rate (BER), error vector magnitude (EVM), and signal-to-noise ratio (SNR). The proposed WOBAN achieves 7.68 Gb/s data rate for 20 km for the optical back-end and 240 Mb/s for the outdoor wireless front-end.     

Sub-THz continuous wave generation scheme using high-order harmonics modulated lightwave

We propose a sub-THz continuous wave (CW) generation scheme using a high-order harmonics modulated lightwave (HML) to reduce an electronic dependency of a conventional double sideband suppressed carrier (DSB-SC) scheme. The electronic dependency should be overcome to increase frequency tunability of the conventional DSB-SC scheme. This is because the frequency of a local oscillator (LO), f_LO, should be one-half frequency of the frequency of a desired sub-THz CW in the conventional DSB-SC scheme. The proposed scheme is formed by adding an optical feedback loop to the conventional DSB-SC scheme. In order to verify our proposed scheme, a 120 GHz CW is generated using the LO with f_LO = 20 GHz. Based on our experimental results, we have found that the frequency of the LO can be reduced by our proposed scheme up to one-sixth (20 GHz) of 120 GHz. The 120 GHz CW generated by the proposed scheme has 52 dB higher photomixed output power with narrow spectral linewidth than that of the 120 GHz CW generated by the conventional DSB-SC scheme using the LO with f_LO = 20 GHz. Consequently, our proposed scheme can be helpful to reduce the electronic dependency of the conventional DSB-SC scheme.     

A novel OCS millimeter-wave generation scheme with data carried only by one sideband and wavelength reuse for uplink connection

We propose a novel optical carrier suppression (OCS) millimeter-wave generation scheme with data carried only by one sideband using a dual-drive Mach–Zehnder modulator (MZM) in radio-over-fiber system, and the transmission performance is also investigated. As the signal is transmitted along the fiber, there is no time shifting of the codes caused by chromatic dispersion. Simulation results show that the eye diagram keeps open and clear even when the optical millimeter-waves are transmitted over 110 km and the power penalty is about 1.9 dB after fiber transmission distance of 60 km. Furthermore, due to the +1 order sideband carrying no data, a full duplex radio-over-fiber link based on wavelength reuse is also built to simplify the base station. The bidirectional 2.5 Gbit/s data is successfully transmitted over a 40 km standard single mode fiber with less than 0.8 dB power penalty in the simulation. Both theoretical analysis and simulation results show that our scheme is feasible and we can obtain a simple cost-efficient configuration and good performance over long-distance transmission.     

A full-duplex radio-over-fiber system based on frequency decupling

A full-duplex radio-over-fiber system using frequency-decupling optical millimeter-wave based on external modulation via a Mach–Zehnder modulator is proposed and analyzed theoretically. The simulation results show that the power penalties for both the downstream and upstream signals are less than 0.5 dB. In this scheme, the configuration of a base station is simplified due to no laser at a base station, and the frequency of local oscillator signal is largely reduced due to the frequency-decupling millimeter-wave technique. The costs of central office and base station are largely reduced.     

Fiber-optic distributed sensor based on phase-sensitive OTDR and wavelet packet transform for multiple disturbances location

A novel location scheme based on the wavelet packet transform (WPT) for the phase-sensitive optical time-domain reflectometry (OTDR) is proposed. The wavelet packet energy of the backscattered signal at a time interval over the sensing fiber is provided to discriminate the disturbances regions from other regions. It is insensitive to the frequency drift of the laser. The simultaneous measurement of two disturbances at 5 km and 7 km positions is achieved by the location technique based on the WPT over a 9 km monitored length with a 50 m spatial resolution even when a laser with a frequency drift rate of 230 MHz/min is utilized. During 100 times experiments the false alarm rate is only 2% and the maximum location error is 150 m.     

Design and experiment of spectrometer based on scanning micro-grating integrating with angle sensor

A compact, low cost, high speed, non-destructive testing NIR (near infrared) spectrometer optical system based on MOEMS grating device is developed. The MOEMS grating works as the prismatic element and wavelength scanning element in our optical system. The MOEMS grating enables the design of compact grating spectrometers capable of acquiring full spectra using a single detector element. This MOEMS grating is driven by electromagnetic force and integrated with angle sensor which used to monitored deflection angle while the grating working. Comparing with the traditional spectral system, there is a new structure with a single detector and worked at high frequency. With the characteristics of MOEMS grating, the structure of the spectrometer system is proposed. After calculating the parameters of the optical path, ZEMAX optical software is used to simulate the system. According the ZEMAX output file of the 3D model, the prototype is designed by SolidWorks rapidly, fabricated. Designed for a wavelength range between 800 nm and 1500 nm, the spectrometer optical system features a spectral resolution of 16 nm with the volume of 97 mm × 81.7 mm × 81 mm. For the purpose of reduce modulated effect of sinusoidal rotation, spectral intensity of the different wavelength should be compensated by software method in the further. The system satisfies the demand of NIR micro-spectrometer with a single detector.     

High speed ultra short pulse fiber ring laser using photonic crystal fiber nonlinear optical loop mirror

A scheme to generate high speed optical pulse train with ultra short pulse width is proposed and experimentally studied. Two-step compression is used in the scheme: 20 GHz and 40 GHz pulse trains generated from a rational harmonic actively mode-locked fiber ring laser is compressed to a full width at half-maximum (FWHM) of ~ 1.5 ps using adiabatic soliton compression with dispersion shifted fibers (DSF). The pulse trains then undergo a pedestal removal process by transmission through a cascaded two photonic crystal fiber (PCF)-nonlinear optical loop mirrors (NOLM) realized using a double-ring structure. The shortest output pulse width obtained was ~ 610 fs for 20 GHz pulse train and ~ 570 fs for 40 GHz pulse train. The signal to noise ratio of the RF spectrum of the output pulse train is larger than 30 dB. Theoretical simulation of the NOLM transmission is conducted using split-step Fourier method. The results show that two cascaded NOLMs can improve the compression result compared to that for a single NOLM transmission.     

Advanced multifunctional optical switch for multimode optical fiber networks

In this work, an advanced multifunctional optical switch based on multimode fibers is proposed. It can work as a 3 × 1 optical multiplexer/combiner, a 2 × 2 optical switch, a variable optical attenuator and a variable optical power splitter. All these functionalities can be developed in the same device without any hardware modification, only by using the proper ports and control electronics.The proposed switch has been developed for being used in the visible and near infrared wavelength range: 450–650 nm for optical fiber automobile applications, 650–850 nm for home broadband applications; and 850–1300 nm for multimode fiber access networks. Up to three different types of twisted nematic liquid crystal cells have been designed and fabricated for fulfilling these different wavelength ranges as part of the proposed device.The multifunctional switch has been implemented and experimentally tested. Crosstalk usually better than ? 15 dB at 532 nm, 660 nm and 850 nm, in any state has been measured. Switching is achieved at voltage levels of 4 Vrms. Fiber to fiber insertion losses when operating as a 2 × 2 optical switch, range from 10 to 15 dB within 200 nm wavelength range; with a non-optimized optics for collimation and coupling.     

An optical OFDM multiplexer and 16 × 10 Gb/s OOFDM system using serrodyne optical frequency translation based on LiNbO3 phase modulator

This paper proposes an all-optical orthogonal frequency division multiplexing (OFDM) multiplexer based on sawtooth wave driving LiNbO₃ phase modulators by using serrodyne optical frequency translation. This multiplexer has high integration ability. The designing concept and implementation method have been discussed. A 16 × 10 Gb/s optical OFDM system is designed based on this multiplexer. Transmission characteristics, including tolerances of polarization mode dispersion (PMD) and nonlinear impairments have been studied numerically. Simulations show that the PMD tolerance is about 42 ps. The spectral efficiency reaches 1 bit/s/Hz with binary modulation format.