Cross-shaped metal–semiconductor–metal plasmonic crystal for terahertz modulator

The transmission and tuning properties of a cross-shaped plasmonic crystal based on periodic metal–semiconductor–metal (MSM) structures have been investigated in the terahertz (THz) regime. According to the mode analysis, we find that the different resonance modes in the plasmonic crystal show the different changes when this device is actively controlled by the carrier injection of the MSM structures. The longitudinal modes disappear, while the horizontal mode moves to a higher frequency. The former leads to an intensity modulation at 0.5 THz and 1.1 THz when the groove depth h = 60 μm, and the later leads to a band blue-shift from 1.325 THz to 1.38 THz. These results will be applied to THz modulation and tunable filtering.     

10 Gb/s optical carrier distributed network with W-band (0.1 THz) short-reach wireless communication system

Millimeter-wave (mm-wave) operated in W-band (75 GHz–0.11 THz) is of particular interests, since this frequency band can carry signals at much higher data rates. We demonstrate a 10 Gb/s optical carrier-distributed network with the wireless communication system. The mm-wave signal at carrier frequency of 0.1 THz is generated by a high speed near-ballistic uni-traveling carrier photodiode (NBUTC-PD) based transmitter (Tx), which is optically excited by optical short pulses. The optical pulse source is produced from a self-developed photonic mm-wave waveform generator (PMWG), which allows spectral line-by-line pulse shaping. Hence these optical pulses have high tolerance to fiber chromatic dispersion. The W-band 10 Gb/s wireless data is transmitted and received via a pair of horn antennas. The received 10 Gb/s data is envelope-detected and then used to drive an optical modulator at the remote antenna unit (RAU) to produce the upstream signal sending back to the central office (CO). 20 km single mode fiber (SMF) error free transmission is achieved. Analysis about the optimum repetition rate of the optical pulse source and the transmission performance of the upstream signal are also performed and discussed.     

Tunable single-longitudinal-mode operation of a sandwich-type YAG/Ho:YAG/YAG ceramic laser

We present a 2.09 μm single-longitudinal-mode sandwich-type YAG/Ho:YAG/YAG ceramic laser pumped by a Tm-doped fiber laser for the first time. A pair of F-P etalons was used to achieve tunable single-longitudinal-mode operation. The maximum single-longitudinal-mode output power of 530 mW at 2091.4 nm was obtained with an absorbed pump power of 8.06 W, corresponding to an optical conversion efficiency of 6.6% and a slope efficiency of 12.7%. Wavelength tunable was achieved by tuning the angle of etalons and the wavelength could be tuned from 2091.1 nm to 2092.1 nm, corresponding to a tuning frequency of 68 GHz. The M² factor was measured to be 1.23.     

Infrared spectra of high coverage CO adsorption structures on Pt(111)

The adsorption of carbon monoxide on Pt(111) was studied using polarization modulation infrared reflection absorption spectroscopy (PM-IRAS) and sum frequency generation (SFG) spectroscopy. Two CO on-top signals at 2110 cm^? 1 and 2097 cm^? 1 have been detected under continuous CO exposure in a pressure range from 10^? 7 to 100 mbar and at temperatures between 200 K and 300 K. The formation of the higher wavenumber signal is found to be kinetically limited below 200 K and by the presence of a stable c(4 × 2) adlayer in UHV. On the basis of the results presented in this study and previous experimental findings the two on-top signals are related to different CO compression layers on Pt(111) with θ > 0.5, hexagonal Moiré lattices and rectangular coincident site lattices.     

A filterless optical millimeter-wave generation based on frequency octupling

A novel method of a filterless optical millimeter-wave (MMW) signal generation with frequency octupling using four nested Mach–Zehnder modulators (MZMs) is proposed for Radio-over-fiber systems. By symmetrically biasing the MZMs and using two RF driving signals with 90 deg phase delay, a cost-effective, high-quality and filterless optical millimeter-wave at 80 GHz with an optical harmonic distortion suppression ratio exceeding 40 dB is obtained. The proposed system is insensitive to the MZM bias drift, which demonstrates a relatively higher stability. So it is a viable solution for the future ultra-high frequency MMW applications.     

Phase errors in FSE signals due to low frequency electromagnetic interference

ObjectiveTo quantitatively evaluate induced phase errors in fast spin echo (FSE) signals due to low frequency electromagnetic inference (EMI).MethodsSpecific form of Bloch equation is numerically solved in time domain for two different FSE pulse sequences (ETL = 8) with two different bandwidths. A single spin is modeled at x = 10 cm, EMI frequencies are simulated from 1 to 1000 Hz and phase errors at different echo times are calculated.ResultsPhase errors in the received echo signals induced by EMI are significantly higher at low frequencies (< 200 Hz) than at high frequencies and the phase errors at low frequencies can be effectively reduced by using high receiving bandwidth.ConclusionPulse sequence bandwidth can be used to control the phase errors in the FSE signals due to low frequency EMI.     

Frequency agile antennas based on aluminum nitride ceramics

In this paper, the frequency agile antennas made using aluminum nitride ceramic substrate are investigated theoretically and experimentally. The aluminum nitride ceramic substrates are prepared by pressing and sintering aluminum nitride powders. The operating frequency of antenna is designed to operate at 2.45 and 5.80 GHz. The shape of the patch attaching on the aluminum nitride substrate was rectangular form, and the dc bias is applied between patch and ground plane. This simple technique is used to implement electronically tunable antenna. Deformation of the antenna due to the applied dc bias is obtained as the computation of thickness and extension strains. The simulated frequency shifts at 2.45 and 5.80 GHz, are 7.42 and 7.70 MHz, and the experimentally measured frequency shifts at the same frequencies are 7.50 and 8.50 MHz, respectively. The theoretically simulated results show an average error of less than 4.45% compared with the experimental results.     

Generation of tunable and narrow linewidth continuous-wave yellow laser by sum–frequency mixing of diode-pumped solid-state Nd:YAG ring lasers

We report a tunable, narrow linewidth and high beam quality continuous-wave (CW) yellow laser system at 589 nm. The system is an all solid-state design employing single-pass sum–frequency generation in a KTP crystal by mixing the 1064 nm with 1319 nm lines of two side-pumped Nd:YAG enforcing unidirectional ring lasers. With this method, a CW yellow laser at 589.159 nm with an output power of 0.8 W, a linewidth less than 1.5 GHz and a beam quality M² = 1.29 is obtained. The wavelength of the laser also can be precisely tuned from 589.112 to 589.181 nm in step-length of about 0.22 pm.     

A miniaturized prototype of resonant banana-shaped photoacoustic cell for gas sensing

A resonant photoacoustic cell intended for laser-spectroscopy gas sensing is represented. This cell is a miniature imitation of a macro-scale banana-shaped cell developed previously. The parameters, which specify the cavity shape, are chosen so as not only to provide optimal cell operation at a selected acoustic resonance but also to reduce substantially the cell sizes. A miniaturized prototype cell (the volume of acoustic cavity of ∼5 mm³) adapted to the narrow diffraction-limited beam of near-infrared laser is produced and examined experimentally. The noise-associated measurement error and laser-initiated signals are studied as functions of modulation frequency. The background signal and the useful response to light absorption by the gas are analyzed in measurements of absorption for ammonia in nitrogen flow with the help of a pigtailed DFB laser diode oscillated near a wavelength of 1.53 μm. The performance of prototype operation at the second longitudinal acoustic resonance (the resonance frequency of ∼32.9 kHz, Q-factor of ∼16.3) is estimated. The noise-limited minimal detectable absorption normalized to laser-beam power and detection bandwidth is ∼8.07 × 10⁻⁸ cm⁻¹ W Hz^−1/2. The amplitude of the background signal is equivalent to an absorption coefficient of ∼2.51 × 10⁻⁵ cm⁻¹. Advantages and drawbacks of the cell prototype are discussed. Despite low absorption-sensing performance, the produced miniaturized cell prototype shows a good capability of gas-leak detection.     

Measurements and analysis of the acoustic signals produced by partial discharges in insulation oil

This paper focuses on the frequency analysis of acoustic signals produced by partial discharges (PDs) in insulation oil and the positioning of the PD occurrence for application in the diagnosis of oil-insulated transformers. Three types of electrode systems; the needle–plane, the plane–plane, and the wire–wire structures were assembled to simulate the partial discharge in insulation oil. A low-noise amplifier and a de-coupler were designed to detect the acoustic signal with high-sensitivity. The frequency ranges of the acoustic signal were 60–270 kHz in the needle–plane electrode system, 45–250 kHz in the plane–plane electrode system, and 50–180 kHz in the wire–wire electrode system. Their peak frequencies were 145 kHz, 118 kHz and 121 kHz, respectively.The position of the PD occurrence was calculated from the time difference of arrival (TOA) using three acoustic emission (AE) sensors. The position was found within a 1% error in the experimental set-up.     

Phase sensitive amplifier for PSK signals based on non-degenerate four-wave-mixing in the optical fiber

A phase-sensitive-amplifier (PSA) using only one pump channel based on frequency non-degenerate four-wave-mixing (FWM) process for phase-shift-keying (PSK) signals is proposed and demonstrated. Theoretical analyses are given first. By optimizing power levels of three channels and parameters of the highly nonlinear fiber (HNLF), the PSA is able to restore the signal fidelity (down to a BER of 10^? 9) as the input signal shows an error-floor with the BER of 10^? 6. Moreover, the PSA for the multi-level PSK signals could be achieved by adjusting the phase relationship between two input signals.     

Fabrication and characterization on an organic/inorganic 2 × 2 Mach–Zehnder interferometer thermo-optic switch

An organic/inorganic hybrid 2 × 2 directional coupler (DC) Mach–Zehnder interferometer (MZI) thermo-optic (TO) switch was successfully designed and fabricated using simple direct ultraviolet photolithography process. The hybrid organic/inorganic waveguide structure includes poly-methyl-methacrylate-glycidyl-methacrylate (P(MMA-GMA)), SU-8 2005 and silica as core, upper cladding and under cladding, respectively. Device optimization and simulation were performed to decrease radiation loss and leakage loss, quicken response time and cut down power consumption. Measurements of the fabricated devices at 1550 nm wavelength result in a switching power of 7.2 mW, a response time of ∼100 μs, and crosstalk of −22.8 and −26.5 dB under cross state and bar state, respectively. Besides, the driving-noise-tolerance characteristics of this device were experimentally investigated by directly imposing a generated tunable noise on the pure driving signal (4 V_pp) and the minimum extinction ratio is larger than 18 dB under a noise level of 2.5 V_pp. The effect of noise on extinction ratio was found decreased with the increase of noise frequency.     

4 × 10 Gb/s wavelength multicasting with tunable NRZ-to-RZ pulse format conversion using time- and wavelength-interleaved pulses

We demonstrate 4 × 10 Gb/s simultaneous wavelength multicasting and NRZ-to-RZ pulse format conversion with tunable duty cycle. Multicasting is achieved by four-wave mixing of the input signal with a time- and wavelength-interleaved laser source, while the format conversion is obtained through the use of a pulsed probe. The input data are copied to four multicast outputs with a common relative delay time. Error-free operations have been obtained in all the outputs with power penalties ranging from ? 0.5 to 0.5 dB. Output duty cycles with a tuning range of 4.3 ps have been achieved.     

Coupled frequency-doubling optoelectronic oscillator based on polarization modulation and polarization multiplexing

A coupled frequency-doubling optoelectronic oscillator (OEO) is proposed and experimentally demonstrated, which is constructed based on the perfect combination of polarization modulation and polarization multiplexing. A fundamental microwave signal at 9.95 GHz or a frequency-doubled microwave signal at 19.9 GHz is generated with a wavelength-independent sidemode-suppression ratio (SMSR) as high as 78 dB obtained. The phase noise of the generated 19.9-GHz signal is ? 103.45 dBc/Hz at 10-kHz frequency offset, indicating a good short-term stability. The proposed scheme is simple and flexible, which can find applications in radars and wireless communications.     

A novel optical picosecond-duration NRZ-to-RZ format converter with simultaneous wavelength multicasting using a single-stage Mach–Zehnder modulator

We propose a novel and simple scheme to achieve NRZ-to-RZ format conversion and simultaneous wavelength multicasting based on a single-stage dual-arm electro-optic Mach–Zehnder modulator (MZM) and a short single mode fiber (SMF). The format conversion and wavelength multicast process are achieved by chirp compensation under the condition of generation of optical flat frequency comb. 40 Gb/s NRZ-to-RZ conversion with one-to-five multiple-wavelength channel multicasting and transmission of the NRZ and the converted signals over 200 km dispersion-managed fiber-link are successfully demonstrated by numerical simulation. Research results show that 40 Gb/s 2 ps RZ signal with wavelength-preserving can be obtained after format conversion. The converted RZ signal presents good transmission performance and can easily be multiplexed to 160 Gb/s using optical time division multiplexing (OTDM) technology. All the multicast channels can be error free after 50 km transmission. Besides, the conversion operation can also greatly reduce the timing jitter of the degraded NRZ signal due to the retiming function of the proposed scheme.     

High LO-to-RF isolation 94 GHz coplanar monolithic down-converter for FMCW radar sensor applications

This paper presents a 94 GHz monolithic down-converter with low conversion loss and high local oscillator (LO)-to-RF isolation using the 0.1 μm T-gate metamorphic high electron-mobility transistor (MHEMT) technology. The down-converter consists of a one-stage amplifier and a single-balanced mixer based on the high-directivity tandem coupler structure using the air-bridge crossovers, thereby amplifying the RF signals and maximizing the LO-to-RF isolation by using an inherent S₁₂ isolation characteristic of the amplifier and good phase balance of the tandem coupler. The fabricated one-stage amplifier using a 30 μm × 2 MHEMT shows a small signal gain of 7 dB at 94 GHz. The single-balanced mixer comprising two 20 μm × 2 MHEMT Schottky diodes and the tandem coupler with an additional λ/4-length line exhibits the conversion loss less than 7.8 dB and the LO-to-RF isolation higher than 30 dB in a RF frequency range of 91–96 GHz. Two circuits designed both for a 50 Ω impedance system are integrated into the down-converter of a 2.6 × 2.5 mm² chip size, and it shows a low conversion loss of ∼1 dB at 94 GHz and excellent LO-to-RF isolation above 40 dB in a frequency range of 90–100 GHz. This is the best isolation among the W-band monolithic down-converters reported to date.     

IQ quadrature demodulation algorithm used in heterodyne detection

In order to obtain better detection results of heterodyne, we used phase IQ quadrature demodulation algorithm to process the data which detected by laser heterodyne. Based on laser heterodyne interferometer, processing the data in the interferometer phase IQ quadrature demodulation algorithm from the signal to noise ratio, sampling rate, sampling rate, filter order and cutoff frequency, verify the effects of these system parameters to the phase precision, and choose the best parameters to obtain a better phase precision through experiment as: the signal to noise ratio is 25 dB, the IF signal frequency is 98.3 MHz, 98.5 MHz, 99.1 MHz, 99.5 MHz and 100 MHz, the sampling rate is 512–2048, the cutoff frequency and order of the filter are 0.11 and 40, respectively.     

Single tone and multi tone microwave over fiber communication system using direct detection method

In this paper, an analog microwave over fiber link for long haul distance based upon Rate Equation Laser is demonstrated. This system uses the advantage of high potential bandwidth of fiber in transmission of microwave signal. The interface of the two systems needs an up-conversion of microwave band into baseband (at which fiber operates). An Intensity Modulation Direct Detection (IMDD) technique is used to achieve this purpose. The Rate Equation laser is operated in a dynamic state, where its intensity oscillates at a microwave frequency that varies with the input signal fed by wave generator. This system can also use for two modulating tones. The frequency of the first tone is varied from 1 to 20 GHz and second is set at 5 GHz. A data signal of 10 Gbps is transmitted over long haul single mode fiber by single tone system. A very good bit error rate (BER) 10^?40 performances for 100 km and 25 km fiber link is achieved for both single tone and two tones respectively in proposed microwave over fiber communication system.     

Novel 60 GHz RoF system with optical single sideband mm-wave signal generation and wavelength reuse for uplink connection

In order to improve RF frequency to achieve higher bandwidth and larger capacity, we propose a novel scheme to generate optical single sideband (SSB) millimeter-wave, in which frequency doubling of local radio frequency (RF) is obtained by using one integrated Mach–Zehnder modulator (MZM), and we theoretically investigate the generating principle of SSB. The optical SSB modulation scheme is employed to generate 60 GHz optical mm-wave and the 2.5 Gb/s baseband signal is simultaneously up-converted at the central station (CS) for downlink transmission, and the optical carrier is reused for uplink connection at the base station (BS). The full-duplex 2.5 Gb/s data are successfully transmitted over 40 km standard single-mode fiber (SMF-28) for both uplink connection and downlink connection with less than 2-dB power penalty. Results show the novel 60 GHz RoF system with optical SSB mm-wave signal generation using optical frequency doubling is feasible and we can obtain simple cost-efficient configuration and good performance over long-distance transmission.     

Tunable dual-wavelength fiber laser based on an opto-VLSI processor and four-wave mixing in a photonic crystal fiber

A stable wavelength and wavelength spacing tunable dual-wavelength fiber laser based on an Opto-very-large-scale-integration (Opto-VLSI) processor and four-wave mixing (FWM) in a high-nonlinear photonic crystal fiber is experimentally demonstrated. The results show that the line width of the tunable dual-wavelength fiber laser is 0.02 nm, and the wavelength spacing can be tuned from 0.8 nm to 4 nm with a 0.15 nm step. Under the influence of the FWM, the uniformity is below 0.6 dB and the measured side mode suppression ratio (SMSR) is above 45 dB.