Preparation and characterization of Fe3O4 magnetic composite microspheres covered by a P(MAH-co-MAA) copolymer

A magnetic core–shell-layered polymer microsphere (MPS) was successfully synthesized by a dispersion polymerization route, where the modified Fe₃O₄ nanoparticles (MFN) were used as a core, while poly(maleic anhydride-co-methacrylic acid) P(MAH-co-MAA) as a shell was covered on the surface of the Fe₃O₄ nanoparticles. Environmental scanning electron microscope (ESME) and transmission electron microscope (TEM) measurements indicate that the magnetic P(MAH-co-MAA)/Fe₃O₄ composite microspheres assume sphericity and have a novel core–shell-layered structure. The crystal particle sizes of the unimproved Fe₃O₄ and the MFN samples vary from 8 to 16 nm in diameter, and the average size is about 10.6 nm in diameter. The core–shell magnetic composite microspheres can be adjusted by changing the stirring speed. Since multiple Fe₃O₄ cores were coated with a proper percentage of P(MAH-co-MAA) copolymers, and therefore lower density was acquired for the MPS, which improved sedimentation and dispersion behavior. The saturated magnetization of pure Fe₃O₄ nanoparticles reaches 48.1 emu g⁻¹ and the value for composite nanoparticles was as high as 173.5 emu g⁻¹. The nanoparticles show strong superparamagnetic characteristics and can be expected to be used as a candidate for magnetism-controlled drug release.     

Magnetic behavior of core–shell particles

We have prepared composite magnetic core–shell particles using the process of soap-free emulsion polymerization and the co-precipitation method. The shell of the synthesized composite sphere is cobalt ferrite (CoFe₂O₄) nanoparticles and the core consists of poly(styrene-co-methacrylic acid) polymer. The mean crystallite sizes of the coated CoFe₂O₄ nanoparticles were controlled in the range of 2.4–6.7 nm by the concentration of [NH₄⁺] and heated temperature. The magnetic properties of the core–shell spherical particles can go from superparamagnetic to ferromagnetic behavior depending on the crystalline sizes of CoFe₂O₄.     

Synthesis of high quality and monodisperse CdS:Mn/ZnS and CdS:Mn/CdS core–shell nanoparticles

CdS:Mn²⁺/ZnS and CdS:Mn²⁺/CdS core–shell nanoparticles were synthesized in aqueous medium via chemical precipitation method in an ambient atmosphere. Polyvinylpyrrolidone (PVP) was used as a capping agent. The effect of the shell (ZnS and CdS) thickness on CdS:Mn²⁺ nanoparticles was investigated. Inorganically passivated core/shell nanocrystals having a core (CdS:Mn²⁺) diameter of 4 nm and a ZnS-shell thickness of ∼0.5 nm exhibited improved PL intensity. Optimum concentration of doping ions (Mn²⁺) was selected through optical study. For all the core–shell samples two emission peaks were observed, the first one is band edge emission in the lower wavelength side due to energy transfer to the Mn²⁺ ions in the crystal lattice; the second emission is characteristic peak of Mn²⁺ ions (⁴T₁ → ⁶A₁). The XRD, TEM and PL results showed that the synthesized core–shell particles were of high quality and monodisperse.     

Effect of the shell on the transport properties of poly(glycerol) and Poly(ethylene imine) nanoparticles

Dendritic core–shell architectures containing poly (glycerol) and poly (ethylene imine) cores and poly(lactide) shell (PG-PLA and PEI-PLA respectively) were synthesized. Analogous of these core–shell architectures containing the same cores but poly (L-lactide) shell (PG-PLLA and PEI-PLLA, respectively) were also synthesized. In this work PG and PEI were used as macroinitiator for ring opening polymerization of the lactid and L-lactide monomers. Different molar ratios of monomer to end functional groups of PG ([LA]/[OH]) and PEI ([LA]/[NHn] (n = 1 or 2)) were used to prepare the core–shell architectures with different shell thickness. These core–shell architectures were able to encapsulate and transport the small guest molecules. Their transport capacity (TC) depended on the type and thickness of the shells. TC of core–shell architectures containing PLLA shell was higher than that for their analogs containing PLA shell. The diameter of core–shell architectures was between 20–80 nm. The rate of release of guest molecules from chloroform solution of nanocarriers to water phase was investigated and it depended on the type of the core, shell and solvent.     

Synthesis of Core-Shell Latex Particles Through One-Step Emulsion Polymerization

Polystyrene/polyacrylate acid (PSt/PAA) core-shell latex particles were obtained through a one-step emulsion polymerization by making use of controlled distribution of the reaction monomer at different temperatures. The polymerization conversion and stability were characterized to find appropriate synthetic conditions. The results show that the mixed solution of certain proportions of St, AA, and distilled water were inhomogeneous at lower temperature, e.g. 25°C, but the mixed solution would become more and more homogeneous with increasing temperature. The mixed solution became completely homogeneous at 75°C. After this, according to the results of uniformity degree change, the pre-emulsion temperature was set at 75°C, and the polymerization temperature was 65°C. α,α-Azobisisobutyronitrile was used as initiator. Stable latex and latex particles, with obvious core-shell structure, were obtained. The composition of the mixed solution was characterized by UV-vis spectrophotometry. The morphology of latex particles was observed using transmission electron microscopy and scanning electron microscopy. The research provides a new method to obtain polymer particles with a core-shell structure.     

Synthesis of magnetite core–shell nanoparticles by surface-initiated ring-opening polymerization of l-lactide

Fe₃O₄–polylactide (PLA) core–shell nanoparticles were perpared by surface functionalization of Fe₃O₄ nanoparticles and subsequent surface-initiated ring-opening polymerization of l-lactide. PLA was directly connected onto the magnetic nanoparticles surface through a chemical linkage. Fourier transform infrared (FT-IR) spectra directly provided evidence of the PLA on the surface of the magnetic nanoparticles. Transmission electron microscopy images (TEM) showed that the magnetic nanoparticles were coated by PLA with a 3-nm-thick shell. The amount of grafted polymer determined by thermal gravimetric analysis was ∼13.3% by weight. X-ray diffraction (XRD) patterns of as-prepared core–shell nanoparticles showed the same structure (spinel cubic lattice type) to that of the bare core materials with similar intensity of the corresponding peaks, and that the polymer coating was amorphous. The particles could be stably dispersed in chloroform for several weeks. The prepared Fe₃O₄–PLA core–shell nanoparticles were superparamagnetic behavior with a saturation magnetization value nearly identical to that of the bare magnetic nanoparticles, rendering the Fe₃O₄–PLA nanoparticles for potential applications in both the material technology and biomedical fields.     

Synthesis and characterisation: Zinc oxide–sulfide nanocomposites

A novel synthesis method is presented for the preparation of nanosized-semiconductor zinc oxide–sulphide (ZnO/ZnS) core–shell nanocomposites, both formed sequentially from a single-source solid precursor. ZnO nanocrystals were synthesized by a simple co-precipitation method and ZnO/ZnS core–shell nanocomposites were successfully fabricated by sulfidation of ZnO nanocrystals via a facile chemical synthesis at room temperature. The as-obtained samples were characterized by X-ray diffraction and transmission electron microscopy. The results showed that the pure ZnO nanocrystals were hexagonal wurtzite crystal structures and the ZnS nanoparticles were sphalerite structure with the size of about 10 nm grown on the surface of the ZnO nanocrystals. Optical properties measured reveal that ZnO/ZnS core–shell nanocomposites have integrated the photoluminescent effect of ZnO and ZnS. Based on the results of the experiments, a possible formation mechanism of ZnO/ZnS core–shell nanocomposites was also suggested. This treatment is suggested to improve various properties of optoelectronically valuable ZnO/ZnS nanocomposites. These nanosized semiconductor nanocomposites can form a new class of luminescent materials for various applications.     

Grafting poly(ethylene glycol) monomethacrylate onto Fe3O4 nanoparticles to resist nonspecific protein adsorption

Magnetic nanoparticles grafted with poly(poly(ethylene glycol) monomethacrylate) (P(PEGMA)) were prepared by reversible addition-fragmentation chain transfer (RAFT) polymerization. In this approach, S-benzyl S′-trimethoxysilylpropyltrithiocarbonate, used as a chain transfer agent for RAFT, was first immobilized onto the magnetic nanoparticle surface, and then PEGMA was grafted onto the surface of magnetic nanoparticle via RAFT polymerization. The results showed that P(PEGMA) chains grew from magnetic nanoparticles by surface-induced RAFT polymerization. The grafted P(PEGMA) chains can decrease the nonspecific adsorption of proteins on the surface of Fe₃O₄ nanoparticles.     

Size-controlled synthesis of superparamagnetic iron oxide nanoparticles and their surface coating by gold for biomedical applications

The size mono-dispersity, saturation magnetization, and surface chemistry of magnetic nanoparticles (NPs) are recognized as critical factors for efficient biomedical applications. Here, we performed modified water-in-oil inverse nano-emulsion procedure for preparation of stable colloidal superparamagnetic iron oxide NPs (SPIONs) with high saturation magnetization. To achieve mono-dispersed SPIONs, optimization process was probed on several important factors including molar ratio of iron salts [Fe³⁺ and Fe²⁺], the concentration of ammonium hydroxide as reducing agent, and molar ratio of water to surfactant. The biocompatibility of the obtained NPs, at various concentrations, was evaluated via MTT (3-(4, 5-dimethylthiazol-2-yl)-2, 5-diphenyltetrazolium bromide) assay and the results showed that the NPs were non-toxic at concentrations <0.1 mg/mL. Surface functionalization was performed by conformal coating of the NPs with a thin shell of gold (∼4 nm) through chemical reduction of attached gold salts at the surface of the SPIONs. The Fe₃O₄ core/Au shell particles demonstrate strong plasmon resonance absorption and can be separated from solution using an external magnetic field. Experimental data from both physical and chemical determinations of the changes in particle size, surface plasmon resonance optical band, phase components, core–shell surface composition, and magnetic properties have confirmed the formation of the mono-dispersed core–shell nanostructure.     

Preparation and Characterization of Nickel–poly(St-co-AA) Composite Nanoparticles

Poly(St-co-AA) particles were prepared by seeded emulsion polymerization. The nickel ions absorbed on poly(St-co-AA) particles were reduced by hydrated electrons produced by ultraviolet irradiation. The metal nickel–copolymer composite particles were obtained by ultraviolet irradiation for the first time. These metal nickel–copolymer composite particles were further characterized by XRD and TEM measurements.     

Surface modification of M-Ba-ferrite powders by polyaniline: Towards improving microwave electromagnetic response

A composite of polyaniline (PANI)-coated M-type hexagonal barium ferrite (M-Ba-ferrite) powder was prepared by an in situ polymerization of an aniline monomer in the presence of M-Ba-ferrite particles. The obtained composite was characterized by Fourier transform infrared spectra (FT-IR), X-ray diffraction (XRD) and transmission electron microscopy (TEM). The structure and microwave response properties were investigated. The continuous coverage of polyaniline has been produced on the platelet M-Ba-ferrite particle surface, and a core–shell structure has been formed. The results show that the coverage of polyaniline has a great influence on microwave response of M-Ba-ferrite particles. A polyaniline thin layer formed on the surface of a barium ferrite particle changes the character of frequency dispersion of microwave absorption. The results indicate the existence of an interaction at the interface of polyaniline macromolecule and barium ferrite particle, which influences the physical and chemical properties of the composite. The interaction and interfacial polarization are seen as important factors contributing to the influence on microwave response of the PANI-coated ferrite composite powders.     

Stably dispersible P3HT/ZnO nanocomposites with tunable luminescence by in-situ hydrolysis and copolymerization of zinc methacrylate

In this paper, the copolymer shell with the internal hydrophobic polymethacrylate layer and the external hydrophilic poly(ethylene glycol) methyl ether groups was successfully bonded on the surface of ZnO nanocrystals through a simple sol–gel method, i.e., radical polymerization of zinc methacrylate (Zn(MA)₂) and poly(ethylene glycol) methyl ether methacrylate (PEGMEMA) and hydrolysis. The prepared ZnO@poly(methacrylate-co-poly(ethylene glycol) methyl ether methacrylate) (ZnO@PPEGMA) nanocrystals showed good dispersion and smaller particle size, due to the presence of copolymer shell. The optical properties of ZnO@PPEGMA nanocrystals were characterized by ultraviolet–visible (UV–vis) spectroscopy and photoluminescence (PL) spectroscopy. The results indicated that the absorption edge and PL emission in the UV region of ZnO@PPEGMA nanocrystals appeared obvious blue-shift, due to the smaller particle size. Incorporation of ZnO@PPEGMA nanocrystals into poly(3-hexylthiophene) (P3HT) matrix, the dispersion of P3HT/ZnO@PPEGMA nanocomposites was greatly improved and the nanocomposites possessed excellent photoluminescence stability. Meanwhile, it was observed that the PL emission of P3HT/ZnO@PPEGMA nanocomposites was enhanced significantly, due to the presence of copolymer shell and the improvement of compatibility of ZnO@PPEGMA in the P3HT matrix. The results showed that the P3HT/ZnO@PPEGMA nanocomposites could be potential candidates for optical applications.     

Preparation and surface encapsulation of hollow TiO nanoparticles for electrophoretic displays

Hollow black TiO nanosparticles were obtained via deposition of inorganic coating on the surface of hollow core-shell polymer latex with Ti(OBu)₄ as precursor and subsequent calcination in ammonia gas. Hollow TiO particles were characterized by scanning electron microscope, transmission electronic microscopy, X-ray diffraction, and thermogravimetric analysis. Encapsulation of TiO via dispersion polymerization was promoved by pretreating the pigments with 3-(trimethoxysilyl) propyl methacrylate, making it possible to prepare hollow TiO-polymer particles. When St and DVB were used as polymerization monomer, hollow TiO-polymer core-shell particles came into being via dispersion polymerization, and the lipophilic degree is 28.57%. Glutin-arabic gum microcapsules containing TiO-polymer particles electrophoretic liquid were prepared using via complex coacervation. It was founded that hollow TiO-polymer particles had enough electrophoretic mobility after coating with polymer.     

Preparation and application of core–shell Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>/polythiophene nanoparticles

The Fe₃O₄/polythiophene nanoparticles, possessing core–shell structure, were prepared by two-step method. In the first step, the Fe₃O₄ particles were synthesized via co-precipitation of FeCl₃ and FeSO₄, using the NH₃·H₂O and N₂H₄·H₂O as precipitant system. In the second step, the thiophene adsorbed and polymerized on the surface of the Fe₃O₄ in the solvent of chloroform. Raman, FTIR, EDS, XRD, TEM, Zeta potential measurement and TG-SDTA were employed to characterize the composition and structure of the products. The results showed that the Fe₃O₄/polythiophene nanoparticles were successfully synthesized with good dispersion and stable core–shell structure, provided with average particle size of approximately 20 nm, in which the diameter of Fe₃O₄ core was approximately 14 nm and the thickness of polythiophene shell was approximately 3–4 nm. Then, the nanoparticles were added into alkyd varnish to prepare a composite coating. The neutral salt spray test, paraffin control test and mechanical test were carried out to identify the properties of the composite coating. It was found that the composite coating had good performances of anticorrosion and paraffin controlling when the mass fraction of the nanoparticles was 0.8–1 wt% in alkyd varnish. As a multifunctional material, the Fe₃O₄/polythiophene nanoparticles can be used in the internal coating of pipeline and have great potential application in crude oil pipeline transportation.     

Facile preparation and characterization of hollow poly(St-co-MMA-co-BA-co-MAA) core–double shell latex nanoparticles for electrophoretic displays

Novel core–double shell particles with poly(methyl methacrylate-co-butyl acrylate) (PMMA-co-BA) as the cores, poly(methyl methacrylate-co-butyl acrylate-co-methacrylic acid) (PMMA-co-BA-co-MAA) as the inner shells, poly(styrene-co-methyl methacrylate) (PS-co-MMA) as the outer shells were prepared by soap-free emulsion polymerization. The acid–alkali osmotic swelling processes were made before the outer shells wrapped for bigger aperture. The optimal experiment conditions were summarized. The morphology and size of the hollow latex particles were observed by transmission electron microscopy. The results showed that the uniform sizes of the hollow latex particles were about 230 nm. The electrophoretic mobility of them in tetrachloroethylene was 0.91 × 10⁻¹⁰ m² V⁻¹ s⁻¹, and the Zeta-potential was 5.87 mV. The results showed that the hollow polymer particles can used as background particles.     

One-pot synthesis and characterization of rhodamine derivative-loaded magnetic core–shell nanoparticles

A new method to produce elaborate nanostructure with magnetic and fluorescent properties in one entity is reported in this article. Magnetite (Fe₃O₄) coated with fluorescent silica (SiO₂) shell was produced through the one-pot reaction, in which one reactor was utilized to realize the synthesis of superparamagnetic core of Fe₃O₄, the formation of SiO₂ coating through the condensation and polymerization of tetraethylorthosilicate (TEOS), and the encapsulation of tetramethyl rhodamine isothiocyanate-dextran (TRITC-dextran) within silica shell. Transmission electron microscopy (TEM), energy dispersive X-ray (EDX) analysis, and X-ray diffraction (XRD) were carried out to investigate the core–shell structure. The magnetic core of the core–shell nanoparticles is 60 ± 10 nm in diameter. The thickness of the fluorescent SiO₂ shell is estimated at 15 ± 5 nm. In addition, the fluorescent signal of the SiO₂ shell has been detected by the laser confocal scanning microscopy (LCSM) with emission wavelength (λ_em) at 566 nm. In addition, the magnetic properties of TRITC-dextran loaded silica-coating iron oxide nanoparticles (Fe₃O₄@SiO₂ NPs) were studied. The hysteresis loop of the core–shell NPs measured at room temperature shows that the saturation magnetization (M _s) is not reached even at the field of 70 kOe (7T). Meanwhile, the very low coercivity (H _c) and remanent magnetization (M _r) are 0.375 kOe and 6.6 emu/g, respectively, at room temperature. It indicates that the core–shell particles have the superparamagnetic properties. The measured blocking temperature (T _B) of the TRITC-dextran loaded Fe₃O₄@SiO₂ NPs is about 122.5 K. It is expected that the multifunctional core–shell nanoparticles can be used in bio-imaging.     

Energy-filtered electron microscopy for imaging core–shell nanostructures

CuAg core–shell nanoparticles are synthesized by ultra-high vacuum thermal evaporation. We show on this system how the Energy-Filtered Transmission Electron Microscopy (EFTEM) technique allows one to improve the characterization by precisely pointing out the formation of core–shell arrangements in bimetallic nanoparticle assemblies. A criterion to measure the shell thickness from EFTEM images on unique core–shell nanoparticles is defined, that can be used for core–shell nanoparticles of any sizes, with shell thicknesses over 1 nm. It is based on the intensity variation along a line drawn across a core–shell nanoparticle on a EFTEM image. This criterion has been validated by a close comparison of the shell thickness measurements performed in this work and the ones obtained by acoustic micro-Raman spectroscopy. Using this criterion, we report a strong correlation between the size of the Cu cores and the formation of the core–shell arrangements in the nanoparticle assembly studied in this work. The influence of the Cu core shape is also evidenced. The characterisation of such systems using High Resolution TEM (HRTEM) is also discussed.     

Synthesis, characterization and evaluation of uniformly sized core–shell imprinted microspheres for the separation trans-resveratrol from giant knotweed

A novel core–shell molecularly imprinting microspheres (MIMs) with trans-resveratrol as the template molecule; acrylamide (AA) as functional monomer and ethylene glycol dimethacrylate (EGDMA) as cross-linker, was prepared based on SiO₂ microspheres with surface imprinting technique. These core–shell trans-resveratrol imprinted microspheres were characterized by infrared spectra (IR), scanning electron microscopy (SEM), thermogravimetric analysis (TGA), and high performance liquid chromatography (HPLC). The results showed that these core–shell imprinted microspheres, which take on perfect spherical shape with average shell thickness of 150 nm, exhibit especially selective recognition for trans-resveratrol. These imprinted microspheres were applied as solid-phase extraction materials for selective extraction of trans-resveratrol from giant knotweed extracting solution successfully.     

Sensitive detection of DNA based on the optical properties of core–shell gold nanorods

In this article, a type of core–shell nanostructure, Au₂S/AuAgS/Ag₃AuS₂-coated gold nanorods (GNRs) with unique optical properties was used as a sensing platform to detect fish sperm DNA (fsDNA). The prepared core–shell nanorods are positively charged due to the adsorption of the positively charged cetyltrimethylammonium bromide (CTAB) cations on their surface. fsDNA can form ternary fsDNA–CTAB–nanorod complexes together with CTAB and nanorod, which provides a useful platform to detect fsDNA through absorption spectra and resonance light scattering (RLS) spectroscopy. In this sensitive core–shell nanorod sensor, CTAB concentration and the nanoparticle dosage play important roles and have been investigated. Moreover, the fsDNA–CTAB–nanorod complexes induce a great enhancement of RLS intensity of the core–shell GNRs and directly proportional to the concentration of fsDNA, reaching a detection limit of about 10⁻⁹ mg/mL. This study will be significant for as-prepared core–shell GNRs for future application in biological systems.     

Template synthesis of nanostructured silica with hollow core and mesoporous shell structures

Silica capsules with hollow macroporous core–mesoporous shell (HCMS) were synthesized through template-assisted replication of submicrometer-size polystyrene spheres as templates. The silica mesoporous shell exhibited highly ordered hexagonal structure as confirmed by X-ray diffraction pattern and TEM image. The pore diameter and BET surface area of this sample were found to be 2.1 nm and 1387 m²/g, respectively.