Magnetic and magnetoresistive properties of Al<Subscript>2</Subscript>O<Subscript>3</Subscript>–Sr<Subscript>2</Subscript>FeMoO<Subscript>6–δ</Subscript>–Al<Subscript>2</Subscript>O<Subscript>3</Subscript> nanoheterostructures

A method has been developed for fabricating nanoporous matrices based on anodic aluminum oxide for the deposition of ferromagnetic nanoparticles in them. The modes of deposition of strontium ferromolybdate thin films prepared by the ion-plasma method have been worked out, and the magnetic and magnetoresistive properties, structure, and composition of the films have been investigated. It has been revealed that the microstructure and properties of the strontium ferromolybdate films deposited by ionplasma sputtering depend on the deposition rate and the temperature of the substrate. Based on the measurement of the electrical resistivity of nanoheterostructures in a magnetic field, it has been found that the magnetoresistance reaches 14% at T = 15 K and B = 8 T, which is due to the manifestation of tunneling magnetoresistance.     

Elastic properties of TeO<Subscript>2</Subscript>–B<Subscript>2</Subscript>O<Subscript>3</Subscript>–Ag<Subscript>2</Subscript>O glasses

A series of glasses [(TeO₂) _x (B₂O₃)_1−x ]_1−y [Ag₂O] _y with x = 70 and y = 10, 15, 20, 25 and 30 mol% were synthesised by rapid quenching. Longitudinal and shear ultrasonic velocity were measured at room temperature and at 5 MHz frequency. Elastic properties, Poisson's ratio, microhardness, softening temperature and Debye temperature have been calculated from the measured density and ultrasonic velocity at room temperature. The experimental results indicate that the elastic constants depend upon the composition of the glasses and the role of the Ag₂O inside the glass network is discussed. Estimated parameters based on Makishima–Mackenzie theory and bond compression model were calculated in order to analyse the experimental elastic moduli. Comparison between the experimental elastic moduli data obtained in the study and the calculated theoretically by the mentioned above models has been discussed.     

Fabrication of a nanoparticle TiO<Subscript>2</Subscript> photoelectrochemical cell utilizing a solid polymeric electrolyte of PAN–PC–LiClO<Subscript>4</Subscript>

A nanoparticle TiO₂ solid-state photoelectrochemical cell utilizing as a solid electrolyte of poly(acrylonitrile)–propylene–carbonate–lithium perchlorate (PAN–PC–LiClO₄) has been fabricated. The performance of the device has been tested in the dark and under illumination of 100-mW cm⁻² light. A nanoparticle TiO₂ film was deposited onto indium tin oxide-covered glass substrate by controlled hydrolysis technique assisted with spin-coating technique. The average grain size for the TiO₂ film is 76 nm. LiClO₄ salt was used as a redox couple. The room temperature conductivity of the electrolyte is 4.2 × 10⁻⁴ S cm⁻¹. A graphite electrode was prepared onto a glass slide by electron beam evaporation technique. The device shows the rectification property in the dark and shows the photovoltaic effect under illumination. The best J _sc and V _oc of the device were 2.82 μA cm⁻² and V _oc of 0.58 V, respectively, obtained at the conductivity of 4.2 × 10⁻⁴ S cm⁻¹ and intensity of 100 mW cm⁻². The J _sc was improved by about three times by introducing nanoparticle TiO₂ and by using a solid electrolyte of PAN–PC–LiClO₄ replacing PVC–PC–LiClO₄ in the device. The current transport mechanism of the cell is also presented in this paper.     

Electrical switching in the MoO<Subscript>3</Subscript>–WO<Subscript>3</Subscript>–P<Subscript>2</Subscript>O<Subscript>5</Subscript> and MoO<Subscript>3</Subscript>–P<Subscript>2</Subscript>O<Subscript>5</Subscript> glasses

High field electrical switching on blown films of MoO₃(60%)–P₂O₅(40%), MoO₃(50%)–WO₃(10%)–P₂O₅(40%), and MoO₃(45%)–WO₃(15%)–P₂O₅(40%) having different thicknesses was studied and compared. Switching was observed using two terminal samples. S-type current–voltage characteristic (current-controlled negative resistance—CCNR) with memory was observed in molybdenum–phosphate glasses, but N-type characteristic (voltage-controlled negative resistance—VCNR) with threshold in tungsten–molybdenum–phosphate glasses was observed. The important observation was that with the addition of WO₃ to binary MoO₃–P₂O5 led to a change of I–V characteristic from CCNR with memory to VCNR with threshold. The measurements of density and molar volume showed linear relation between MoO₃ content and density which decreased with the increase of MoO₃ content. The samples’ thickness had no significant effect on threshold voltage. The attained results also indicated that the electrode material had no effect on switching property of devices. The switching behavior of the devices did not show any dependence on the polarity of the applied voltage. In terms of the effect of heat on the switching behavior of molybdenum–phosphate glasses, it was found that threshold voltage decreases with increasing of temperature. Finally, the switching phenomenon was explained by thermal (formation of crystalline filaments) and electronic models.     

Structural properties of composite cathode material LiFePO<Subscript>4</Subscript>–Li<Subscript>3</Subscript>V<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>

Composite cathode material LiFePO₄–Li₃V₂(PO₄)₃ is synthesized through a chemical reduction and lithiation using FeVO₄·xH₂O as both iron and vanadium sources. The structural properties of LiFePO₄–Li₃V₂(PO₄)₃ are investigated. X-ray diffraction results show the composite material containing olivine type LiFePO₄ and monoclinic Li₃V₂(PO₄)₃ phases. High-resolution transmission electron microscopy and energy-dispersive X-ray spectrometry results indicate that mutual doping effects take place between the LiFePO₄ and Li₃V₂(PO₄)₃ particles with V³⁺ doping the LiFePO₄ while Fe²⁺ dopes the Li₃V₂(PO₄)₃. LiFePO₄–Li₃V₂(PO₄)₃ nanocomposites are formed in the carbon webs. There is no structural compatibility between monoclinic (Li₃V₂(PO₄)₃) and olivine (LiFePO₄) domains in composite material LiFePO₄–Li₃V₂(PO₄)₃.     

Phase formation in the BaCO<Subscript>3</Subscript>–PbO–Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>–Nb<Subscript>2</Subscript>O<Subscript>5</Subscript> system

Features of the formation of lead-ferroniobate compounds in the xBaCO₃–(1 – x)PbO–Fe₂O₃–Nb₂O₅ system by solid-phase synthesis are investigated. For perovskite-type lead-ferroniobate solid solution, a single-phase concentration region is revealed at 1233 K. The crystalline structures of the synthesized compounds are refined using Rietveld analysis and the Pm3?m and R3m space groups. Ceramic samples of lead ferroniobate are studied by scanning electron microscopy.     

Microwave dielectric properties of the 5.5Li<Subscript>2</Subscript>O–Nb<Subscript>2</Subscript>O<Subscript>5</Subscript>–7TiO<Subscript>2</Subscript> ceramics

A new Li₂O–Nb₂O₅–TiO₂ (LNT) ceramic with the Li₂O:Nb₂O₅:TiO₂ mole ratio of 5.5:1:7 was prepared by solid state reaction route. The phase and structure of the ceramic were characterized by X-ray diffraction and scanning electron microscopy (SEM). The microwave dielectric properties of the ceramics were studied using a network analyzer. The microwave dielectric ceramic has low sintering temperature (∼1075°C) and good microwave dielectric properties of ε _r=42, Q×f=16900 GHz (5.75 GHz), and τ _f =63.7 ppm/°C. The addition of B₂O₃ can effectively lower the sintering temperature from 1075 to 875°C and does not induce degradation of the microwave dielectric properties. Obviously, the LNT ceramics can be applied to microwave low temperature-cofired ceramics (LTCC) devices.     

Sol–gel synthesis and characterization of Li<Subscript>2</Subscript>CO<Subscript>3</Subscript>–Al<Subscript>2</Subscript>O<Subscript>3</Subscript> composite solid electrolytes

Composite solid electrolytes in the system (1???x)Li₂CO₃–xAl₂O₃, with x?=?0.0–0.5 (mole), were synthesized by a sol–gel method. The synthesis carried out at low temperature resulted in voluminous and fluffy products. The obtained materials were characterized by X-ray diffraction, differential scanning calorimetry, scanning electron microscopy/energy-dispersive X-ray, Fourier transform infrared spectroscopy and AC impedance spectroscopy. Structural analysis of the samples showed an amorphous feature of Li₂CO₃ and traces of α-LiAlO₂, γ-LiAlO₂ and LiAl₅O₈. The prepared composite samples possess high ionic conductivities at 130–180 °C on account of the presence of lithium aluminates as well as the formation of a high concentration of an amorphous phase of Li₂CO₃ via this sol–gel preparative technique.     

High-Temperature Heat Capacity of Zn<Subscript>2</Subscript>V<Subscript>2</Subscript>O<Subscript>7</Subscript>–Cu<Subscript>2</Subscript>V<Subscript>2</Subscript>O<Subscript>7</Subscript> Solid Solutions

Differential scanning calorimetry has been used to study the influence of temperature on the heat capacity of synthesized vanadates Zn₂V₂O₇, (Cu_0.56Zn_1.44)V₂O₇, and (Cu_1.0Zn_1.0)V₂O₇. It is found that dependences C_p = f(T) have extremes. The thermodynamic properties of Zn₂V₂O₇ have been determined.     

Preparation and characterization of organic–inorganic hybrid compound [N(C<Subscript>4</Subscript>H<Subscript>9</Subscript>)<Subscript>4</Subscript>]<Subscript>2</Subscript>Cu<Subscript>2</Subscript>Cl<Subscript>6</Subscript>

Organic–inorganic hybrid sample [N(C₄H₉)₄]₂Cu₂Cl₆ was prepared via the reaction between copper chloride and tetrabutylammonium chloride. The compound was characterized by X-ray powder diffraction, IR, Raman, differential scanning calorimetry (DSC), DTA-TGA analysis and electrical impedance spectroscopy. DSC studies indicate a presence of one-phase transition at 343 K. The complex impedance of compound [N(C₄H₉)₄]₂Cu₂Cl₆ have been investigated in temperature and frequency ranges 300–380 K and 200 Hz–5 MHz, respectively. The Z′ and Z″ versus frequency plots are well fitted to an equivalent circuit model. The circuits consist of the parallel combination of bulk resistance R _p and constant phase elements CPE. The frequency dependence of the conductivity is interpreted in term of Jonscher's law: s(w) = s_dc + Awⁿ \sigma (\omega ){ } = {\sigma_{\rm{dc}}} + { }A{\omega^n} . The conductivity follows the Arrhenius relation. The variation of the value of these elements with temperatures confirmed the availability of the phase transition at 343 K detected by DSC and electrical measurements.     

Large electrostrictive strain in lead-free Bi<Subscript>0.5</Subscript>Na<Subscript>0.5</Subscript>TiO<Subscript>3</Subscript>–BaTiO<Subscript>3</Subscript>–KNbO<Subscript>3</Subscript> ceramics

In the present work, (1−x)(0.935Bi_0.5Na_0.5TiO₃–0.065BaTiO₃)–xKNbO₃ (BNT–BT–KN, BNT–BT–100xKN) ceramics with x ranging from 0 to 0.1 were prepared by the conventional ceramic fabrication process. A large electrostrictive coefficient of ∼10⁻² m⁴ C⁻² is obtained with the composition x ranging from 0.02 to 0.1, which is close to the well-known electrostrictive material Pb(Mg_1/3Nb_2/3)O₃. Under an electric field of 4 kV/mm, the electrostrictive strain can reach as high as 0.08%. Besides, the electric field induced strain behavior indicates a temperature independent behavior within the temperature range of 20 to 150°C. The large electrostrictive strain is suggested to be ascribed to the formation of non-polar (NP) phase developed by the KNbO₃ substitution, and the high electrostrictive coefficient of BNT–BT–KN ceramics makes them great candidates to be applied in the new solid-state actuators.     

Influence of Matrix Nature on the Structural Characteristics of In<Subscript>2</Subscript>O<Subscript>3</Subscript>–CeO<Subscript>2</Subscript> and SnO<Subscript>2</Subscript>–CeO<Subscript>2</Subscript> Composites Fabricated by the Impregnation Method

The structural characteristics, valence states, and distribution of cerium ions between the components in In₂O₃–CeO₂ and SnO₂–CeO₂ nanocomposites fabricated using the impregnation method were studied. X-ray photoelectron spectroscopy (XPS) and energy-dispersive X-ray spectroscopy (EDX) were used to show that, during impregnation, cerium ions are not included into In₂O₃ crystals and are disposed only on their surface in the form of nano-sized crystallites or amorphous clusters. On the other side, under the contact of CeO₂ clusters with a surface of SnO₂ matrix crystals, cerium ions penetrate into the surface layer of these crystals. In contrast to an In₂O₃–CeO₂ system, where the addition of CeO₂ does not affect the conduction activation energy, where cerium oxide is added to SnO₂, the observed increase in the resistance of a SnO₂–CeO₂ composite is accompanied by a sufficient increase in activation energy. These data and the XPS spectra confirm the modification of the surface layers of conductive SnO₂ crystals as, a result of the penetration of cerium ions into these layers.     

Specific heat of the [NH<Subscript>2</Subscript>(CH<Subscript>3</Subscript>)<Subscript>2</Subscript>]<Subscript>2</Subscript>ZnCl<Subscript>4</Subscript> crystal in the temperature region 80–300 K

The specific heat of [NH₂(CH₃)₂]₂ZnCl₄ was measured calorimetrically in the temperature region 80–300 K. As the temperature T decreases, the C _p (T) dependence indicates a phase transition sequence, with the phase transition at T₆=151 K observed for the first time. The thermodynamic characteristics of the crystal were refined. The transformation occurring at T₂=298.3 K is shown to be an incommensurate-commensurate phase transition.     

Synthesis of cubic Li<Subscript>7</Subscript>La<Subscript>3</Subscript>Zr<Subscript>2</Subscript>O<Subscript>12</Subscript> by modified sol–gel process

Polycrystalline cubic Li₇La₃Zr₂O₁₂ (LLZ) with garnet-related type structure has been synthesized at 700 °C by modified sol–gel processes using citric acid as organic complexing agent and butan-1-ol or propan-2-ol as surface active agent. Thermal analysis (thermogravimetric/differential thermal analysis) indicated that the gel must be annealed at around 700 °C to completely remove the organic solvent. X-ray powder diffraction, X-ray fluorescence, and scanning electron microscopic investigations revealed that Al may not be essential to form cubic-phase LLZ; however, the addition of Al₂O₃ led to enhanced sintering of LLZ.     

Theoretical study of the structure of lead zirconate–titanate PbZr<Subscript>0.6</Subscript>Ti<Subscript>0.4</Subscript>O<Subscript>3</Subscript>

A model of the structure of the piezoelectric ceramic lead zirconate–titanate PbZr_1–x Ti _x O₃ (PZT) is proposed. The model is based on ab initio calculations for possible local structures using the density functional theory (DFT) approach. A comparison of the calculated neutron diffraction data for local structures and the measured diffraction data obtained for actual powder samples shows there is a partially established long-range crystalline order in the material, in the sublattice of Zr and Ti cations.     

Anomalous states of the structure of [Rb<Subscript>0.7</Subscript>(NH<Subscript>4</Subscript>)<Subscript>0.3</Subscript>]<Subscript>2</Subscript>SO<Subscript>4</Subscript> crystals in the temperature range 4.2–300 K

Crystals of [Rb_0.7(NH₄)_0.3]₂SO₄ solid solutions are studied using x-ray diffractometry in the temperature range 4.2–300 K. No anomalies are revealed in the temperature dependences of the lattice parameters and the volume of the host unit cell. A series of superstructure reflections observed along the basis axes corresponds to the guest lattice formed in the matrix of the host structure. From analyzing the axial ratio of these structures and their temperature dependences, it is concluded that the structure of the crystal has the form of an incommensurate composite. The guest structure of the composite at room temperature can be considered a set of chains that are not correlated along the b direction. In the plane perpendicular to the chain axes, these chains form a regular framework that is also incommensurate to the host lattice.     

Effect of a structural disorder on the magnetic properties of the sodium–cobalt tellurate Na<Subscript>3.70</Subscript>Co<Subscript>1.15</Subscript>TeO<Subscript>6</Subscript>

A new layered oxide, sodium–cobalt tellurate Na_3.70Co_1.15TeO₆, is synthesized and structurally characterized, and its static and dynamic magnetic properties are studied. This compound has a new monoclinic structure type with quasi-one-dimensional cation ordering in magnetically active layers. This compound is antiferromagnetically ordered at a Néel temperature T _N ~ 3.3 K, and the temperature and field dependences of magnetization suggest competing antiferromagnetic and ferromagnetic interactions. EPR spectroscopy reveals complex spin dynamics when temperature changes and the presence of two different paramagnetic centers, which is attributed to the existence of two structurally nonequivalent (regular and antisite) positions for magnetic Co²⁺ ions.     

Internal friction and magnetoelectric response in two-layer composites Tb<Subscript>0.12</Subscript>Dy<Subscript>0.2</Subscript>Fe<Subscript>0.68</Subscript>–PbZr<Subscript>0.53</Subscript>Ti<Subscript>0.47</Subscript>O<Subscript>3</Subscript>

The inverse magnetoelectric effect and internal friction in two-layer composites based on ferromagnetic Tb_0.12Dy_0.2Fe_0.68 and piezoelectric PbZr_0.53Ti_0.47O₃ are studied in an ac electrical field in the frequency range of 52–213 kHz at temperatures of 293 to 400 K. A correlation is found between the internal friction and the efficiency of the inverse magnetoelectric transformation at resonant frequencies.     

Size-controllable synthesis of functional heterostructured TiO<Subscript>2</Subscript>–WO<Subscript>3</Subscript> core–shell nanoparticles

Mono and bicomponent TiO₂ and WO₃ nanoparticles were synthesized inside Vycor^® glass pores, by cycles of impregnation of the glass with the respective oxide precursor followed by its thermal decomposition. The impregnation-decomposition cycle (IDC) methodology promoted a linear mass increase of the glass matrix, and allowed tuning the nanoparticle size. X-ray diffraction and Raman spectroscopy data allowed identifying the formation of TiO₂ as anatase phase, while WO₃ is a mixture of the γ-WO₃ (monoclinic) and δ-WO₃ (triclinic) phases. High resolution transmission electron microscopy images revealed that for 3, 5, and 7 IDC, the TiO₂ nanoparticles obtained presented average diameters of 3.4, 4.3, and 5.1 nm, and the WO₃ nanoparticles have 2.9, 4.6, and 5.7 nm sizes. These TiO₂ and WO₃ monocomponent nanoparticles were submitted to IDC with the other oxide precursor, resulting in bicomponent nanoparticles. The broadening and shift of the Raman bands related to titanium and tungsten oxides suggest the formation of hetero-structure core–shell nanoparticles with tunable core sizes and shell thicknesses.