双层加筋结构有源隔声物理机制研究

深入分析双层加筋结构有源隔声的物理机制有助于控制系统的优化设计。用模态叠加法和声振耦合理论对双层加筋有源隔声结构建模。在辐射加筋板声功率最小的控制条件下,从模态耦合的角度对有源隔声的物理本质进行了详细阐述。分析结果表明,由于双层加筋板中筋的耦合作用影响,系统的声能量传输规律及有源隔声机理与现有的模态分析结论相比均发生改变。结合筋的耦合影响,对空腔声场的模态抑制与重构机理进行修正和补充,清晰解释了双层加筋结构有源隔声的物理本质。      

双层板腔结构声传输及其有源控制研究

利用子系统模态综合方法,结合阻抗-导纳矩阵法,建立了双层板腔结构向自由空间声传输及其在入射板PZT控制、辐射板PZT控制,和腔中次级声源作动等多种控制策略下,系统物理模型的统一的分析模型,导出了系统模态响应及最优次级源强度的统一的阻抗-导纳矩阵表达式。该模型表达式各部分物理意义清晰、明确,便于进行系统耦合理论、有源控制及其机理的分析和数值研究。然后,在此基础上对双层板腔结构声传输有源控制进行了全面深入的数值计算和分析研究,重点探讨了控制方法策略及系统参数对有源控制效果的影响及其对应的控制机理。结果表明:入射板PZT作动辐射声功率最小控制策略是通过入射板、声腔和辐射板三个子系统的模态抑制或重组达到消声的目的,涉及多种复杂控制机理,对入射板、辐射板和声腔模态均有效,但对入射板模态更有效;在低频段声腔(0,0,0)模态在系统耦合响应中起主导作用,因此利用腔中次级声源作动能获得较理想的控制效果,是一种较好的控制策略;由于声腔模态与结构模态间复杂的耦合关系,使得某些频率处腔中声势能一定程度上的降低并不一定导致系统声传输损失的增加,因此,腔中声势能最小控制策略不一定能够获得理想的声传输控制效果。      

部分浸没圆柱壳声固耦合计算的半解析法研究

部分浸没圆柱壳-流场耦合系统的声振分析是一种典型的半空间域内声固耦合问题,其振动及声学计算目前主要依赖于数值方法求解,但无论从检验数值法还是从机理上揭示其声固耦合特性,解析或半解析方法的发展都是不可或缺的.本文提出了一种半解析方法,先将声场坐标系建立在自由液面上,采用正弦三角级数来满足自由液面上的声压释放边界条件;接着基于二维Flügge薄壳理论建立了以圆柱圆心为坐标原点的壳-液耦合系统的控制方程;然后再利用Galerkin法处理声固耦合界面的速度连续条件,推导得到声压幅值与壳体位移幅值之间的关系矩阵并求解该耦合系统的振动和水下声辐射.与有限元软件Comsol进行了耦合系统自由、受迫振动和水下辐射噪声计算结的对比分析,表明本文方法准确可靠.本文的研究为解析求解弹性结构与声场部分耦合的声振问题提供了新的思路.     

A modal test method using sound pressure transducers based on vibro-acoustic reciprocity

A modal test method that uses sound pressure transducers at fixed locations and an impact hammer roving over a test structure is developed in this work. Since sound pressure transducers are used, the current method deals with a coupled structural–acoustic system. Based on the vibro-acoustic reciprocity, the method is equivalent to one, where acoustic excitations at fixed locations are given and the resulting acceleration of the test structure is measured. The current method can eliminate mass loading due to use of accelerometers, which can destroy existence of repeated or close natural frequencies of a symmetric structure. It can also avoid effects of a nodal line of a mode and an inactive area of a local mode, and measure all the out-of-plane modes within a frequency range of interest, including global and local ones. The coupling between the structure and the acoustic field in a structural–acoustic system introduces asymmetry in the model formulation. An equivalent state space formulation is used for a damped structural–acoustic system and the associated eigenvalue problem is derived. The biorthonormality relations between the left and right eigenvectors and the relations between the structural and acoustic components in the left and right eigenvectors are proved. The frequency response functions associated with the current method are derived and their physical meanings are explained. The guidelines for using the current method, including the types of structures that are suitable for the method, the positions of the sound pressure transducers, and the orientation of the test structure relative to the transducers, are provided. Modal tests were carried out on an automotive disk brake using the traditional and current methods, where multiple accelerometers and microphones were used to measure its dynamic responses induced by impacts, respectively. The differences between the measured natural frequencies using the current method and those from the finite element model of the disk brake are less than 3 percent for the first 18 elastic modes, and the modal assurance criterion values of the associated mode shapes are all above 90 percent. The current method was also used to measure the natural frequencies, damping ratios, and mode shapes of a light circuit board.     

Vibroacoustic analysis for a uniform beam using composite Green function method

This paper presents the vibroacoustic analysis of a uniform beam submerged in the compressible fluid. The sound radiated from the beam is formulated by means of the composite Green function method. In this approach, the sound pressures on the beam surface and the velocities of the beam are modeled by using two integral equations of which the kernel functions are the composite Green functions symmetrical to each other. Furthermore, the near field and far field sound radiation of the beam could be predicted based on the free space Green function. An eigenequation of the coupled system is also derived. Numerical results of the vibroacoustic system are given and verified by the power flow method, and the good agreements show that the study work in the paper is correct.     

A note on the modal kurtosis and the concentration factor in reverberation rooms

The effect known as "weak Anderson localization," "coherent backscattering," or "enhanced back-scattering" is a physical phenomenon that occurs in random systems, e.g., disordered media and linear wave systems, including reverberation rooms: The mean square response is increased at the drive point. In a reverberation room, this means that one can expect an increase of the reverberant sound field at the position of the source that generates the sound field. This affects the sound power output of the source and is therefore of practical concern. The relative increase of reverberant energy is described by the concentration factor, which is usually assumed to be 2. However, because of the stronger direct sound field at the source position, it is obviously very difficult to measure this quantity directly under steady-state conditions. A related parameter of crucial importance for the ensemble statistics of responses in rooms is the modal kurtosis, which is usually assumed to be 3. The modal kurtosis is also very difficult to measure directly. This paper presents the results of an indirect experimental estimation of the two parameters.     

Discrete state space method and modal extension method based impact sound synthesis model

The efficient and accurate synthesis of physical parameter-controllable impact sounds is essential for sound source identification. In this study, an impact sound synthesis model of a cylinder is proposed based on discrete state space(DSS) method and modal extension method(MEM). This model is comprised of the whole three processes of the physical interaction, i.e., the Hertz contact process, the transient structural response process, and the sound radiation process. Firstly,the modal expanded DSS equations of the contact system are constructed and the transient structural response of the cylinder is obtained. Then the impact sound of the cylinder is acquired using improved discrete Raleigh integral. Finally, the proposed model is verified by comparing with existing models. The results show that the proposed impact sound synthesis model is more accurate and efficient than the existing methods and easy to be extended to the impact sound synthesis of other structures.     

Active modal control for sound field in a room

I.IntroductionInlate198()'s,thestudiesonactivenoisecontrolhavebeengraduallyturnedfromtheductsandopenspacestothemorepracticaIenclosedsoundfields.SomespeciaIworkinaccordancewiththeactiveattenuationofcabinnoisehasstartedwiththeoreticalmechanisms,systemdesignandtransducerdevelopmellt.Intensivereflectionsandtheformedstandingwavedistributioni11al1enclosedsoundfieldarealwaysthemaindifficultiesforactivenoisecontrolinthesecases.Ontheotherhand,normalmoderesponseofthefieldalsoimplementsanewmethod,theap…     

A hybrid modal analysis for enclosed sound fields

A hybrid modal expansion that combines the free field Green's function and a modal expansion will be presented in this paper based on a review and an extension of the existing modal analysis theories for the sound field in enclosures. The enclosed sound field will be separated into the direct field and reverberant field, which have been treated together in the traditional modal analysis. Studies on a point source in rectangular enclosures show that the hybrid modal expansion converges notably faster than the traditional modal expansions, especially in the region near the source, and introduces much smaller errors with a limited number of modes. The hybrid modal expansion can be easily applied to complex sound sources if the free field responses of the sources are known. Damped boundaries are also considered in this paper, and a set of modified modal functions is introduced, which is shown to be suitable for many damped boundary conditions.     

A METHOD TO PREDICT ACOUSTIC RADIATION FROM AN ENCLOSED MULTICAVITY STRUCTURE

The acoustical reciprocity theorem can be used to solve the problem of vibroacoustic coupling. However, the theorem can be used only on the presupposition that the scattered sound field of the elastic surface concerned is known. This is the key point and the most difficult point for many complicated surfaces, such as a multicavity structure. A new method, covering-domain method, which transforms the calculation of scattered sound field of an arbitrary-shaped closed shell into that of a series of simply closed spherical shells, is applied in this paper to calculate the scattered sound field of a multicavity structure with elastic surfaces. So the radiated sound pressure of an elastic multicavity structure excited by an external force can be predicted by using the acoustical reciprocity theorem. It is verified to be correct by a corresponding test in this paper.     

Predicting the vibroacoustic response of satellite equipment panels

Modern satellites are constructed of large, lightweight equipment panels that are strongly excited by acoustic pressures during launch. During design, performing vibroacoustic analyses to evaluate and ensure the integrity of the complex electronics mounted on the panels is critical. In this study the attached equipment is explicitly addressed and how its properties affect the panel responses is characterized. FEA and BEA methods are used to derive realistic parameters to input to a SEA hybrid model of a panel with multiple attachments. Specifically, conductance/modal density and radiation efficiency for nonhomogeneous panel structures with and without mass loading are computed. The validity of using the spatially averaged conductance of panels with irregular features for deriving the structure modal density is demonstrated. Maidanik's proposed method of modifying the traditional SEA input power is implemented, illustrating the importance of accounting for system internal couplings when calculating the external input power. The predictions using the SEA hybrid model agree with the measured data trends, and are found to be most sensitive to the assumed dynamic mass ratio (attachments/structure) and the attachment internal loss factor. Additional experimental and analytical investigations are recommended to better characterize dynamic masses, modal densities and loss factors.     

复杂结构冲击声合成及实验验证

以复杂结构受击振动响应的时域计算为目的, 讨论了结构阻尼的计算方法, 给出一种用于冲击声合成的综合数值方法, 并进行了实验验证. 首先, 考虑到阻尼是影响瞬态振动时变特性的重要因素, 详细讨论了两种模态阻尼的计算方法; 其次, 对阻尼板的受击振动和声辐射进行了时域仿真, 并与时域有限差分法的计算结果进行对比, 显示出两种声音合成方法的计算结果具有高度的一致性; 最后, 针对有限长圆柱壳的受击振动, 将合成声与实验录音进行了对比研究. 结果表明, 合成声与实际录音的时域包络、频谱结构以及衰减趋势基本一致, 证明了采用数值方法进行冲击声合成的有效性. 关键词： 声音合成 模态阻尼 冲击声 数值方法     

Mechanisms of active control of sound transmission through a linked double-wall system into an acoustic cavity

The mechanism of active control on sound transmission through a mechanically linked double-wall structure into an acoustic cavity is investigated in this paper. Two control methods, i.e., structural control and acoustic control under two linkage cases (soft and hard) are investigated to analyze the effect of the links on the selection of control strategies and the corresponding control mechanisms. Simulations are performed to examine the dominant control mechanism (modal suppression or modal rearrangement) in different frequency ranges for each control case. The alteration in the structural-acoustic coupling is also analyzed so as to explain the mechanisms of sound attenuation. In addition, the dominance of the acoustic mode (0, 0, 0) in the energy transmission process as well as its use in designing a more effective sensor/actuator arrangement is discussed.     

Modal analysis by free vibration response only for discrete and continuous systems

This work aims to develop the algorithm for modal analysis by free vibration response only (MAFVRO), in particular for the general or non-proportional viscous damping system model. If the structural displacement or acceleration response due to free vibration can be measured, the system response matrices, including the displacement, velocity and acceleration, can be obtained through numerical differential or integration methods. These response matrices can then be applied to the developed MAFVRO method to determine the structural modal parameters. The numerical differential and integration methods are introduced and adopted to establish the modal parameter prediction program for the non-proportional damping model of MAFVRO. This work also shows the applications of MAFVRO to the multiple degree-of-freedom (mdof) systems and the cantilever beam, respectively. Both the discrete and continuous systems are demonstrated for the feasibility of the MAFVRO algorithm. The developed method uses the free vibration output response only and can obtain the structural modal parameters successfully.     

Mode detection in turbofan inlets from near field sensor arrays

Knowledge of the modal content of the sound field radiated from a turbofan inlet is important for source characterization and for helping to determine noise generation mechanisms in the engine. An inverse technique for determining the mode amplitudes at the duct outlet is proposed using pressure measurements made in the near field. The radiated sound pressure from a duct is modeled by directivity patterns of cut-on modes in the near field using a model based on the Kirchhoff approximation for flanged ducts with no flow. The resulting system of equations is ill posed and it is shown that the presence of modes with eigenvalues close to a cutoff frequency results in a poorly conditioned directivity matrix. An analysis of the conditioning of this directivity matrix is carried out to assess the inversion robustness and accuracy. A physical interpretation of the singular value decomposition is given and allows us to understand the issues of ill conditioning as well as the detection performance of the radiated sound field by a given sensor array.     

基于平面声源的三层有源隔声结构物理机制研究

次级源为平面声源的三层有源隔声结构,深入理解有源隔声的物理机理有助于挖掘降噪潜力及实现系统优化设计。首先对三层有源隔声结构建模并求解系统的振动响应。然后,对控制前三层结构中声能量的传输规律进行深入分析。最后,在辐射板声功率最小条件下,通过分析控制前后声能量传输特性的变化阐述了隔声的物理机理。结果表明,声能量在三层结构中传输形成四个等效的传输通道,中间板与两腔的作用类似带通滤波器,不同的传输通道具有相似的带通特性。有源隔声机理在于,通过控制抑制了通带内的能量传输,显著提高了三层结构整体的隔声性能,从而有效阻止了声波的向后传播。