丙三醇溶液声致发光中的黑体辐射谱

利用U型管圆锥泡声致发光装置,测量到了丙三醇溶液中圆锥泡声致发光的光谱和光脉冲。结果表明,测量得到的发光光谱为光滑的连续谱,且与理论模拟得到的黑体辐射谱相吻合,拟合温度分布于2 600～3 500 K范围内。文章从空间和时间两方面分析了圆锥泡空化发光中存在黑体辐射的原因：较大的气泡体积(气泡塌缩半径为1.4 cm)与较长的发光时间(几十微秒)。另外,实验研究表明随着发光波长的增长,光脉冲宽度变宽,从而进一步证明了圆锥泡声致发光中的黑体辐射机制。最后,利用测量得到的发光光谱和脉冲计算得到了发光光强为0.18 J,远远高于其他方式得到的声致发光光强。     

乙二醇溶液中圆锥泡声致发光的发光特性

利用一种改进后的U形管圆锥泡声致发光装置，研究了乙二醇溶液中圆锥泡声致发光的发光特性.实验结果表明，利用乙二醇溶液可以得到超强的单个发光脉冲，其脉冲宽度可以达到150 μs，其值远远高于其他方式产生的声致发光的脉冲宽度.测量得到的光谱为一从紫外到可见光波长范围的连续谱，在589 nm附近叠加有钠的3P-3S原子发射谱线.在钠的原子发射谱线两侧测量得到了Na-Ar分子激发态跃迁形成的蓝卫星带，并在声致发光实验中测得了Na-Ar的红卫星带以及钠的3S-4S原子发射谱线. 关键词： 圆锥泡声致发光 光脉冲 光谱 卫星带     

圆锥气泡声致发光光脉冲和光谱

对一种U形管圆锥气泡发光装置进行了改进，使其发光效果更好，利用光电倍增管和光谱仪 得到了水中空气圆锥气泡的发光脉冲和发光光谱图. 得到的发光脉冲在几百个ps和几个ns之 间不等；在近红外波长范围内观测到了水分子振动能级的特征谱，其连续谱发光强度随着波 长的增加而升高. 另外还得到了在水中加入NaCl溶液的气泡发光光谱图. 关键词： 声致发光 圆锥气泡 光脉冲 光谱     

乙二醇溶液中直管圆锥泡声致发光光脉冲和光谱

在U型管声致发光装置的基础上建立了一套新型的声致发光装置—直管圆锥泡声致发光装置,详细地介绍了此装置的结构和实验操作步骤,利用此装置得到了超强的发光脉冲。测量得到了乙二醇溶液中圆锥泡声致发光的发光脉冲,结果显示脉冲半宽度大约为80 μs左右,远远高于其他声致发光形式所产生的脉冲宽度,这主要是由于圆锥泡可以获得远远高于超声声致发光中气泡所能得到的能量。发光光谱为一从紫外光至可见光波长范围的连续谱,上面叠加C₂有d3Π_g→d3Π_u的跃迁形成的五个序列谱带,分别对应于Δν＝-2,Δν＝-1,Δν＝0,Δν＝1和Δν＝2;同时叠加有CN的B2Σ+→X 2Σ+跃迁形成的3个序列谱带和CH的A2Δ→X 2Π 跃迁谱带。特别是实验中测量得到了斯旺带光谱序列谱带清晰的振动结构。最后,通过与理论模拟得到的斯旺带光谱相对强度的比较,估算得到了C₂分子的振动温度大约为(4 200±200) K。     

有机溶液中圆锥泡声致发光

在U形管声致发光装置的基础上建立了一套新型的声致发光装置——直管圆锥泡声致发光装置. 利用此装置以有机溶液为液体介质得到了超强的发光脉冲并测量得到了其发光光谱. 结果表明发光光谱为一从紫外光至可见光波长范围的连续谱,上面叠加有C₂的d³Π_g→d³Π_u跃迁形成的五个序列谱带,分别对应于Δv=-2,Δv=-1,Δv=0,Δv< 关键词： 声致发光 光谱 斯旺带 振动温度     

声致发光的流体动力学实验方法

介绍两种使用流体动力学实现声致发光的方法:刹管法和U管圆锥泡法.这两种方法的设备简单,操作方便,容易在普通物理实验中进行,所得结果和传统单泡声致发光有所不同.U管圆锥泡法创造了发光功率和单脉冲能量的新记录,并首次用条纹相机得到了时间分辨发射光谱.     

测量单泡声致发光中气泡R(t)曲线的前向Mie散射技术

光干涉原理和Mie理论计算结果表明,单泡声致发光中气泡前向Mie散射的振荡信号,主要是由于气泡的透射光束和表面反射光束之间光干涉产生的. 这些干涉波峰形成了测量气泡半径的空间标尺,标尺的单位长度δR由散射角θ,检测光波波长和流体光折射率确定,而每个波峰就是标尺的刻线,它们与该时刻的气泡半径大小一一对应. 在30°—50°散射角范围内,利用前向Mie散射实验测定了单泡声致发光中气泡的最大半径,R(t)曲线及平衡半径,表明前向Mie散射是一种便捷的测定气泡运动特性的有效方法. 关键词： 单泡声致发光 前向Mie散射 光干涉     

单泡声致发光中气泡的动力学特性——振子模型

单泡声致发光是通过气泡的运动将低能量密度的声能转换成高能量密度的光能的能量转换过程。因此,把气泡看作以流体为负载的振子,利用带有能量耗散函数的Ｌａｇｒａｎｇｉａｎ方程,可以获得描述在不可压缩、粘滞流体中气泡近球对称振动的运动方程。在适当近似下,利用解析解对气泡在膨胀、崩溃和回弹这３个过程中的动力学行为进行了讨论,得到单泡声致发光中气泡动力学特性较为简明的物理图像。     

测量单泡声致发光中气泡R(t)曲线的前向Mie散射技术

光干涉原理和Mie理论计算结果表明,单泡声致发光中气泡前向Mie散射的振荡信号,主要是由于气泡的透射光束和表面反射光束之间光干涉产生的.这些干涉波峰形成了测量气泡半径的空间标尺,标尺的单位长度δR由散射角θ,检测光波波长和流体光折射率确定,而每个波峰就是标尺的刻线,它们与该时刻的气泡半径大小一一对应.在30°-50°散射角范围内,利用前向Mie散射实验测定了单泡声致发光中气泡的最大半径,R(t)曲线及平衡半径,表明前向Mie散射是一种便捷的测定气泡运动特性的有效方法.     

光电倍增管在磷酸液声致发光实验中的应用

对不同厚度液体进行光强测量,深入探索空化气泡的运动,研究发光机理很有意义。用超声激励法在磷酸液体中实现多泡声致发光,研究不同共振频率下发光的特点。利用光电倍增管多次测量发光强度相互比较,结果是在液体厚度10 cm、驱动频率f=21.061kHz和f=20.316kHz时,周期性较好为50μs,液体通过漩涡集中气泡可以使更多气泡发光;在液体厚度3 mm、驱动频率f=17.91kHz和f=19kHz时,周期性很好为25μs;且光信号都较强。结论是磷酸中声致发光强度、周期与液体厚度、驱动频率密切相关。本文以磷酸液多泡声致发光实验研究为基础,从内部和外部原理来出发,详细介绍了光电倍增管在多泡声致发光光强测量中的实用,为今后研究者提供了一些经验。根据实验过程中遇到的一些实际问题提出了建议和改善意见。     

TO ENHANCE THE INTENSITY OF SONOLUMINESCENCE

The transient resonance of a sonoluminescence bubble has been analysed. When the bubble performs its transient resonance at the nth order harmonics of the standing waves in the liquid, the light intensity strongly depends on the amplitude of the driving pressure (proportional to its 2n power, with n=f_r/f, where f_r is Minnaert's linear resonant frequency of the bubble and f is the frequency of driving sound). The kinetic energy of a vibrating bubble becomes maximum approximately when it is in its equilibrium size. For example, when the ambient temperature of a bubble decreases from 34℃ to 4℃, a huge increase of the light intensity emitted by it can be explained. A suggestion was made that, within the limits permitted by the phase diagrams, as high an increase in driving pressure as possible could enhance the light intensity of sonoluminescence up to four orders of magnitude.     

Sonoluminescence

Abstract

Sonoluminescence is the light emission phenomenon from collapsing bubbles in liquid irradiated by an ultrasonic wave. In the present review, theoretical and experimental studies of the two types of sonoluminescence [single‐bubble sonoluminescence (SBSL) and multibubble sonoluminescence (MBSL)] are described. SBSL is a sonoluminescence from a single stably pulsating bubble trapped at the pressure antinode of a standing ultrasonic wave. MBSL is a sonoluminescence occurring from many bubbles in liquid irradiated by an ultrasonic wave. The theoretical and experimental studies suggest that SBSL originates in emissions from plasma inside the heated bubble at the bubble collapse, whereas MBSL originates both in emissions from plasma and in chemiluminescence inside heated bubbles at the bubble collapse. Unsolved problems of sonoluminescence have also been explained in detail.     

Computational simulation of ionization processes in single-bubble and multi-bubble sonoluminescence

The most recent spectroscopic studies of moving-single bubble sonoluminescence (MSBSL) and multi-bubble sonoluminescence (MBSL) have revealed that hydrated electrons (e$_{{\rm aq}}^{-}$) are generated in MSBSL but absent in MBSL. To explore the mechanism of this phenomenon, we numerically simulate the ionization processes in single- and multi-bubble sonoluminescence in aqueous solution of terbium chloride (TbCl$_{3}$). The results show that the maximum degree of ionization of single-bubble sonoluminescence (SBSL) is approximately 10000 times greater than that of MBSL under certain special physical parameters. The hydrated electrons (e$_{{{\rm aq}}}^{-}$) formed in SBSL are far more than those in MBSL provided these electrons are ejected from a bubble into a liquid. Therefore, the quenching of e$_{{{\rm aq}}}^{-}$ to SBSL spectrum is stronger than that of the MBSL spectrum. This may be the reason that the trivalent terbium [Tb(III)] ion line intensities from SBSL in the TbCl$_{3}$ aqueous solutions with the acceptor of e$_{{{\rm aq}}}^{-}$ are stronger than those of TbCl$_{3}$ aqueous solutions without the acceptor of e$_{{{\rm aq}}}^{-}$. Whereas the Tb(III) ion line intensities from MBSL are not variational, which is significant for exploring the mechanism behind the cavitation and sonoluminescence.     

Single-bubble sonoluminescence in microgravity

Single-bubble sonoluminescence refers to the emission of light from an acoustically trapped bubble undergoing highly nonlinear, presumably radial oscillations. The intensity of the emitted light depends strongly on the forcing pressure, and is limited by the development of instabilities that ultimately results in the extinction of the bubble. In this article, we discuss a possible contributing factor for the generation of instabilities; specifically, we examine the effect of the gravitational force on a sonoluminescence bubble.     

Luminescence mechanism of acoustic and laser-induced cavitation

A new approach is proposed for explaining the experimental data on sonoluminescence of acoustic and laser-induced cavitation bubbles. It is suggested that two different sonoluminescence mechanisms, namely, thermal and electric ones, are possible and that they manifest themselves depending on the bubble dynamics. An intense thermal luminescence occurs as a result of compression of an individual stationary spherical bubble; a weak electric luminescence accompanies the deformation and splitting of the bubble when thermal luminescence is suppressed (for example, in the case of multibubble sonoluminescence). It is shown that, when an individual bubble loses its spherical shape under the effect of different actions (change in the acoustic pressure, artificial deformation, translatory motion, etc.) or when a laser-induced bubble undergoes fragmentation, the sonoluminescence spectrum exhibits specific bands that are similar to the bands in the multibubble sonoluminescence spectrum. The appearance of these bands is attributed to the suppression of the thermal sonoluminescence mechanism and the manifestation of the electric mechanism. It is shown that the maximum temperature T _max characterizing the compression of a laser-induced bubble is primarily determined by the temperature of the plasma at the instant of the laser-induced breakdown, whereas, for an acoustic bubble, T _max is primarily determined by the acoustic and hydrostatic pressures and by the saturation vapor pressure of the liquid.     

Conical bubble photoluminescence from rhodamine 6G in 1, 2-propanediol

A modified U-tube conical bubble sonoluminescence device is used to study the conical bubble photoluminescence. The spectra of conical bubble sonoluminescence at different concentrations of rhodamine 6G (Rh6G) solution in 1,2-propanediol have been measured. Results show that the sonoluminescence from the conical bubbles can directly excite Rh6G, which in turn can fluoresce. The light emission of this kind is referred to as conical bubble photoluminescence. The maximum of fluorescence spectral line intensity in the conical bubble photoluminescence has a red shift in relative to that of the standard photo-excited fluorescence, which is due to the higher self-absorption of Rh6G, and the spectral line of conical bubble photoluminescence is broadened in width compared with that of photo-excited fluorescence.     

A new source of radiation in single-bubble sonoluminescence

An unsolved challenge of sonoluminescence phenomenon is the mechanism of light emission at the moment of collapse. In this article, by considering single-bubble sonoluminescence and based on the hydrochemical model and thermal bremsstrahlung approach, for the first time two different origins of light have numerically been studied to describe the Ar bubble radiation in water at the moment of collapse: (a) radiation from the Ar gas inside the bubble and (b) radiation from the thin layer of the surrounding fluid. The results indicate that, contrary to the previous studies, the radiation from the water shell is dominant, and it is about one order of magnitude stronger than the radiation from the gas inside the bubble. This result can decrease the difference between the theoretical results and the previous experimental data. In addition, based on the role of acoustic pressure amplitude on the characteristics of single-bubble sonoluminescence, various parameters such as degree of ionization, gas pressure, temperature and power were calculated. The results are in excellent agreement with the reported experimental measurements.     

Comparison of Xe single bubble sonoluminescence in water and sulfuric acid

Using the equations of fluid mechanics with proper boundary conditions and taking account of the gas properties, we can numerically simulate the process of single bubble sonoluminescence, in which electron-neutral atom bremsstrahlung, electron-ion bremsstrahlung and recombination radiation, and the radiative attachment of electrons to atoms and molecules contribute to the light emission. The calculation can quantitatively or qualitatively interpret the experimental results. We find that the accumulated heat energy inside the compressed gas bubble is mostly consumed by the chemical reaction, therefore, the maximum degree of ionization inside Xe bubble in water is much lower than that in sulfuric acid, of which the vapour pressure is very low. In addition, in sulfuric acid much larger pa and R0 are allowed which makes the bubbles in it much brighter than that in water.     

Theory of sonoluminescence in single bubbles: Flexoelectric energy contribution

An equation of motion for a cavitating gas bubble immersed in a liquid is introduced which includes a flexoelectric energy term. This energy is deduced from the electric field produced by the bubble wall acceleration (pressure gradient) in the fluid (the flexoelectric effect). We show that under conditions of sonoluminescence, this electric field reaches values typical of the electric breakdown field in water. Our theoretical results are consistent with the duration of light emission, minimum bubble radius, and energy release as measured in sonoluminescence experiments in water. Pis’ma Zh. éksp. Teor. Fiz. 68, No. 6, 442–448 (25 September 1998)