Synthesis of N-doped graphene/SnS composite and its electrochemical properties for lithium ion batteries

N-doped graphene/SnS composite as high-performance anode materials has been synthesized by a simultaneous solvothermal method using ethylene glycol as solvent. The morphology, structure, and electrochemical performance of N-doped graphene/SnS composite were investigated by transmission electron microscope (TEM), X-ray diffraction (XRD), Raman spectra, Fourier transform infrared (FTIR) spectra, X-ray photoelectron spectroscopy (XPS), and electrochemical measurements. The SnS nanoparticles with sizes of 3–5 nm uniformly distribute on the N-doped graphene matrix. The N-doped graphene/SnS composite exhibits a relatively high reversible capacity and good cycling stability as anode materials for lithium ion batteries. The good electrochemical performance can be due to that the N-doped graphene as electron conductor improves the electronic conductivity of composite and elastic matrix accommodates the large volume changes of SnS during the cycles.     

石墨烯/聚乙撑二氧噻吩薄膜储能特性（英）

为了有效利用石墨烯和导电聚合物材料,光雕石墨烯/聚3,4-乙撑二氧噻吩(LSG/PEDOT)复合薄膜通过一种灵巧的光雕工艺制备出来。在此复合薄膜中,每种组分对薄膜的电化学性能提升都有独特的贡献。循环伏安、交流阻抗及恒流充放电测试用来检测薄膜的电化学性能。结果显示,在引入PEDOT纳米颗粒后,LSG/PEDOT复合薄膜显示出更好的能量存储能力。复合薄膜的比容量达到64.33 F/cm3,是光雕石墨烯比容量(3.89 F/cm3)的20倍,复合薄膜经过1000次循环后仍能保持初始容量的94.6%。复合薄膜电化学性能的提升主要是由于引入的PEDOT纳米颗粒既阻挡了石墨烯的层层堆叠,又增加了整个薄膜的比表面积。此种灵活的光雕工艺还可以用来大规模制备超级电容器电极。     

Co$lt;sub$gt;2$lt;/sub$gt;SnO$lt;sub$gt;4$lt;/sub$gt;/Graphene复合材料的制备与电化学性能研究

实验首先采用改进的Hummers法制备氧化石墨,然后以氧化石墨烯为前驱体,通过水热法将锡酸钴纳米颗粒均匀镶嵌在石墨烯薄膜基片上,最终获得Co₂SnO₄/Graphene镶嵌复合材料. 采用X射线衍射（XRD）、扫描电子显微镜（SEM）对材料的结构和形貌进行表征,通过恒电流充放电（CC）、循环伏安法（CV）与交流阻抗法（EIS）测试了材料的电化学性能. 实验结果表明,石墨烯良好的分散性及较高的电子导电率,可以提高锡酸钴材料的电化学性能,材料首次可逆容量达到1415.2 mA·h/g,50次循环后仍能保持469.7 mA·h/g的放电比容量. 关键词： 2SnO₄')" href="#">Co₂SnO₄ 石墨烯 电化学性能 锂离子电池     

Carbon-coated silicon/crumpled graphene composite as anode material for lithium-ion batteries

Silicon is a promising anode material for high-capacity Li-ion batteries (LIBs). However, its insulating property and large volume change during the lithiation/delithiation process result in poor cycling stability and in pulverization of Si. In this work, glucose-derived carbon-coated Si nanoparticles (C–Si NPs) are in conjunction with crumpled graphene (cGr) particles by a spray-drying method to prepare a novel composite (C–Si/cGr) material. The prepared C–Si NPs are uniformly embedded in the ridges of the cGr particles. The carbon layer of C–Si can make a good contact with the graphene sheet, resulting in enhanced electrical conductivity and fast charge transfer. In addition, the unique crumpled structure of the cGr can buffer the large volume change upon cycling process and facilitate the diffusion of electrolyte into the composite material. When employed as an anode electrode of LIBs, the C–Si/cGr composites deliver enhanced electrochemical performance, including stable cycling with a discharge capacity of 790 mAh·g⁻¹ after 100 cycles and a rate capability of 654 mAh·g⁻¹ at 2C. The synergistic effect of the carbon layer coating of Si NPs and the crumpled structure of the cGr particles results in a composite with improved the electrochemical performance, which is likely related to its high electrical conductivity and good mechanical stability of composite material.     

Three-dimensional nitrogen-doped graphene/sulfur composite for lithium-sulfur battery

A three-dimensional nitrogen-doped graphene/sulfur composite (NGS3) was synthesized by a simple hydrothermal method using urea as the nitrogen source and subsequent thermal treatment. The structure and electrochemical performance of the prepared nitrogen-doped graphene/sulfur composite (NGS3) were confirmed by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscope (SEM), Energy dispersive spectroscopy mapping (EDS), and galvanostatic charge/discharge measurements. SEM and EDS mapping show that NGS3 exhibits a porous structure with uniform distribution of sulfur. Compared with the graphene/sulfur composite (NGS1), NGS3 delivers an outstanding rate capability with 1501, 1278, 1136, and 1024 mAh g^?1 at 200, 400, 800, and 1000 mA g^?1, respectively, and the cycle stability of NGS3 is also wonderful, a reversible discharge capacity of 1330 mAh g^?1 is obtained after 80 cycles under the current rate of 200 mA g^?1. The wonderful electrochemical performance could be attributed to the special three-dimensional conductive structure with the help of nitrogen atom.     

Preparation of SnO2–graphene from SnS–graphene oxide for enhanced reversible lithium ion storage

SnO₂–graphene nanocomposites (SnO₂–GNS) have been prepared through a simple hydrothermal reaction with SnS–graphene oxide composites as the precursor. The composite material as prepared was characterized by X-ray diffraction, field emission scanning electron microscopy, transmission electron microscopy, Brunauer–Emmett–Teller analysis, and thermogravimetric analysis. The results indicate that SnO₂ nanoparticles possess a good dispersion on the surface of graphene. Electrochemical tests demonstrate the high reversible lithium ion storage properties of SnO₂–GNS. The nanocomposites retained a reversible capacity of 503 mAh?g^?1 after 40 cycles. Moreover, the composite material exhibited higher capacity and better cyclic performance compared to free SnO₂ nanoparticles physically mixed with graphene in the relative weight ratio. The results suggest that the combination of SnO₂ and graphene leads to synergistic performance, which enhances lithium ion storage properties of the overall system.     

电化学制备钛网负载聚吡咯/石墨烯复合膜及其在超级电容器中的应用

通过电化学的方法在钛网上制备了聚吡咯与石墨烯的复合物薄膜,其过程是先在钛网上通过自组装干燥膜法附着上石墨烯氧化物膜,而后采用电化学还原的方法原位还原制备得到石墨烯膜,随后加入吡咯单体,再通过电化学聚合的方法在石墨烯的表面生长聚吡咯,得到的聚吡咯开始以颗粒的形式存在,而后随着聚合的进行得到了链状的聚吡咯.得到的复合膜有高的比表面积和导电性,可以作为电极活性材料用于超级电容器中提供赝电容,结果表明,复合膜作为电极材料的超级电容器拥有高的性能,比电容达400 F/g,并且电极的充放电稳定性高,5000次复合膜充放电循环后比电容还能保留82%,说明该材料适合于超级电容器.     

Sn and SnO2-graphene composites as anode materials for lithium-ion batteries

Sn and SnO₂-graphene composites were synthesized using hydrothermal process, followed by annealing in Ar/H₂ atmosphere, and characterized using x-ray diffraction, scanning electron microscopy, and transition electron microscopy. The results indicated that the polycrystalline metallic Sn forms nanospheres with a diameter of 100?～?300 nm, while the SnO₂ nanoparticles are much smaller with a size below 15 nm, which adsorb tightly on the surface of graphene sheets. The Sn and SnO₂-gaphene composites showed good electrochemical performance. After 55 charging/discharging cycles, the capacity remains above 440 mAh/g at a cycling rate of 400 mA/g and the coulombic efficiency is 99.1 %. The good electrochemical properties of the composites are partially contributed to the graphene component with good mechanical flexibility and electrical conductivity, which is an excellent carbon matrix for dispersing the Sn and SnO₂ nanostructures and provides the electron transport pathways as well.     

NiCoP/rGO复合材料的合成及其性能研究

以六水合氯化镍、七水合硫酸钴、氧化石墨烯(GO)和赤磷为原料,利用原位水热法,在不添加任何表面活性剂的情况下,合成了磷化钴镍/还原氧化石墨烯(NiCoP/rGO)纳米复合材料,并通过XRD、SEM、TEM、IR、Raman等对该复合材料进行了表征.结果表明,所得复合材料由NiCoP纳米颗粒和还原氧化石墨烯片层结构组成,NiCoP纳米颗粒尺寸大约为20 nm,均匀分布在rGO片层结构表面上,同时探讨了复合材料的形成过程.另外,复合材料的吸附脱除实验表明,所得复合材料对多种染料都具有非常好的吸附作用,因此,在污水处理方面有较大的应用价值.     

One-pot sonochemical synthesis of CuS nanoplates decorated partially reduced graphene oxide for biosensing of dopamine neurotransmitter

The sonochemical methods have been used as a straight forward method for the synthesis of various composite materials, including the transition metal dichalcogenide composites. In the present work, we report a simple sonochemical synthesis of CuS nanoplates decorated partially reduced graphene oxide (PrGO) nanocomposite for the first time. The PrGO-CuS nanocomposite was synthesized using bath-sonication (frequency: 37 kHz; power: 150 W) of graphene oxide (GO), and CuS precursors at 80 °C for 60 min. The physicochemical characterization (FESEM, XRD, FTIR, and Raman spectroscopy) results confirmed the successful formation of CuS nanoplates on PrGO nanosheets. The as-synthesized PrGO-CuS nanocomposite was further utilized for electroanalysis of dopamine neurotransmitter. The obtained electroanalytical results revealed that PrGO-CuS nanocomposite has superior electrochemical activity towards dopamine than those obtained for GO, CuS, and GO-CuS composite. The fabricated biosensor shows a lower limit of detection (0.022 µM) with a more comprehensive linear response range (0.1–155.1 µM) for the detection of dopamine. Moreover, the PrGO-CuS nanocomposite electrode was successfully used for the detection of dopamine in bovine serum albumin.     

MnO_2/石墨烯复合电极材料的制备与储能性能

以葡萄糖为还原剂,天然石墨片为原料,采用Hummer法制备了石墨烯粉末(Graphene);并以该产物、KMnO4和HCl为原料,采用水热法制备了MnO2/Graphene复合材料。用扫描电子显微镜和X射线衍射对所制备的复合材料进行了表征,结果表明,水热法制备的MnO2材料为纯的α-MnO2相,且石墨烯粉末的加入并没有影响MnO2的晶体结构。在1mol/L Na2SO4电解液中进行了循环伏安和计时电位扫描测试,电极材料电化学性能稳定,具有较好的可逆性,在1.27mA/cm2电流密度下进行充放电测试时,电极比电容为147.9F/g;再循环1000次后,电极仍能保持稳定的电容,是一种理想的电化学电极材料。     

Controllable Formation of Niobium Nitride/Nitrogen‐Doped Graphene Nanocomposites as Anode Materials for Lithium‐Ion Capacitors

Niobium nitride/nitrogen‐doped graphene nanosheet hybrid materials are prepared by a simple hydrothermal method combined with ammonia annealing and their electrochemical performance is reported. It is found by scanning electron microscopy (SEM) and transmission electron microscopy (TEM) that the as‐obtained niobium nitride nanoparticles are about 10–15 nm in size and homogeneously anchored on graphene. A non‐aqueous lithium‐ion capacitor is fabricated with an optimized mass loading of activated carbon cathode and the niobium nitride/nitrogen‐doped graphene nanosheet anode, which delivers high energy densities of 122.7–98.4 W h kg^?1 at power densities of 100–2000 W kg^?1, respectively. The capacity retention is 81.7% after 1000 cycles at a current density of 500 mA g^?1. The high energy and power of this hybrid capacitor bridges the gap between conventional high specific energy lithium‐ion batteries and high specific power electrochemical capacitors, which holds great potential applications in energy storage for hybrid electric vehicles.     

A simple approach to synthesize nanosized sulfur/graphene oxide materials for high-performance lithium/sulfur batteries

We report on a simple and facile synthesis route for the sulfur/graphene oxide composite via ultrasonic mixing of the nano-sulfur and graphene oxide aqueous suspensions followed by a low-temperature heat treatment. High-resolution transmission and scanning electronic microscopy observations revealed the formation of a highly porous structure consisting of sulfur with uniform graphene oxide coating on its surface. The resulting sulfur/graphene oxide (S/GO) composite exhibited high and stable specific discharge capacities of 591 mAh g^?1 after 100 cycles at 0.1 C and good rate capability. This enhanced electrochemical performance could be attributed to the effective confining the polysulfides dissolution and accommodation of the volume changes during the Li-S electrochemical reaction by the functional groups on the graphene oxide coating layer. Furthermore, the highly developed porous structure of S/GO composite favors the enhanced ion transport and electrolyte diffusion.     

退火法制备石墨烯-银纳米粒子及其增强拉曼实验

针对目前SERS基底上金属颗粒制备过程中存在的分布不均匀、易氧化和稳定性差等缺点,通过热蒸镀和高温退火获得分布均匀的SERS基底;同时结合石墨烯优良的光学性能、化学惰性、荧光猝灭以及本身的SERS增强等优点,制备了稳定的石墨烯-银纳米颗粒（GE/AgNPs）复合结构SERS基底。通过GE/AgNPs复合结构的拉曼光谱稳定性试验证明了石墨烯在GE/AgNPs结构中起到隔绝银纳米颗粒与空气直接接触及催化氧化银脱氧的作用,有利于SERS基底的时间稳定性。(1) 石墨烯、Ag纳米颗粒及其复合结构的制备。首先采用热蒸镀和高温退火的方法使Ag纳米颗粒均匀地沉积在SiO₂/Si基底上,再采用化学气相沉积法在Cu箔上制备少层石墨烯,并用湿法转移法将石墨烯转移到目标基底上,并实验研究了以不同的退火顺序对GE/AgNPs基底造成的影响。(2) 石墨烯、Ag纳米颗粒及其复合基底的表征。分别采用光学显微镜、扫描电子显微镜和拉曼光谱进行表征,得到转移后的纯石墨烯较完整地覆盖在SiO₂/Si基底上面,表面比较平整,但在少数地方仍然存在褶皱和杂质;SEM表征结果表明对于不同制备流程的GE/AgNPs复合结构上的Ag纳米颗粒基本呈球形。基本符合Ostwald熟化理论,通过对退火温度和时间的控制能获得平均粒径在40~60 nm的银颗粒,且分布较均匀。此外,在不同退火顺序中,石墨烯的加入对银纳米颗粒的扩散形成扩散势垒,从而出现较大的不规则的颗粒。(3) 基底稳定性试验和仿真分析。通过基底本身的Raman mapping测试,分析了石墨烯拉曼特征峰峰值和半高宽的变化,得知基底对石墨烯本身的拉曼增强效果主要来源于银纳米颗粒间的电磁场增强。同时采用浓度为10-6 mol·L-1的罗丹明6G (R6G)水溶液作为探针分子,对转移了石墨烯的GE/AgNPs复合基底和未转移石墨烯的Ag纳米颗粒基底进行了SERS稳定性实验。结果表明GE/AgNPs复合基底在1~33 d内衰减较缓慢,30 d后仍能探测到拉曼信号约为原来信号的35.1%~40.6%;而纯Ag基底上随着Ag纳米颗粒在空气中迅速氧化,基底的SERS性能显著下降,在30 d后只有原来信号的5.9%~11.3%。此外,通过实验得到覆盖了石墨烯之后的增强因子约为6.05×105。最后采用时域有限差分算法（FDTD）计算了复合结构的电磁场分布和理论增强因子,其理论增强因子可以达到5.7×105。实验和仿真结果的差异,主要是源于石墨烯的化学增强作用。     

Synthesis of hierarchical nanospheres Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>/graphene composite and its application in lithium-ion battery as a high-performance anode material

A hierarchically nanospherical α-Fe₂O₃/graphene composite with a homogeneous mono-pore size of 4 nm has been prepared using a hydrothermal method. The composite showed an extremely high rate performance and good cycling stability when applied as an anode material for lithium-ion batteries owing to its unique three dimensional architecture. A specific capacity of 110 mAh/g was obtained at an extremely high current rate of 40 A/g and recover to 830 mAh/g at 0.5 A/g after 60 cycles. After 250 cycles at 2 A/g, the composite electrode exhibited a capacity of 630 mAh/g with a columbic efficiency of 99.5 %.     

TiO_2/石墨烯/Ag复合结构SERS实验

基于氧化物半导体的光催化特性,能够降解有机物分子,使表面增强拉曼散射基底得以重复使用。提出了银纳米颗粒有效修饰覆盖有石墨烯的二氧化钛纳米棒阵列(TiO_2/石墨烯/Ag)复合结构作为表面增强拉曼散射基底,并对其进行了实验研究。利用水热法制备了二氧化钛纳米棒阵列;采用湿法转移石墨烯和光照还原方法制备了TiO_2/石墨烯/Ag复合结构。用罗丹明6G(R6G)分子作为探测分子,结果表明:随着紫外光照沉积时间增加,探针分子的拉曼信号先增强后减弱;计算得到最大增强因子值约为2.6×106。此外,还对TiO_2/石墨烯/Ag复合结构的紫外自清洁特性进行了初步实验,结果表明,紫外光照射20min后,其拉曼强度下降到42.3%,具有一定的紫外清洁效果。     

Silver nanoparticles decorated on a three-dimensional graphene scaffold for electrochemical applications

Silver metal nanoparticles were decorated by electron beam evaporation on graphene foam (GF) grown by chemical vapour deposition. X-ray diffraction, Raman spectroscopy, scanning and transmission electron microscopy, and atomic force microscopy were used to investigate the structure and morphology of the graphene foam/silver nanoparticles (GF/Ag). Both samples were tested as electrodes for supercapacitors. The GF/Ag exhibited a significantly higher capacitive performance, including a specific capacitance value of (~110 Fg⁻¹) and excellent cyclability in a three-electrode electrochemical cell. These results demonstrate that graphene foam could be an excellent platform for metal particles for investigating improved electrochemical performance.     

Synthesis and characterization of Li4Ti5O12/graphene composite as anode material with enhanced electrochemical performance

The use of graphene as a conductive additive to enhance the rate capability and cycle stability of Li₄Ti₅O₁₂ electrode material has been demonstrated. Li₄Ti₅O₁₂ and its composite with graphene (1.86 wt%) are prepared by ball milling and simple chemical method, respectively. Among the as-synthesized composites, Li₄Ti₅O₁₂ particles uniformly clung to the graphene sheets. When used as an electrode material for lithium ion battery, the composite presents excellent rate performance and high cyclic stability. It is found that the composite displayed high-rate capacity of 118.7 mAh?g^?1 at 20 C. Furthermore, the composite exhibits good cycle stability, retaining over 96 % of its initial capacity after 50 cycles at 10 C. The excellent electrochemical performance is attributed to a decrease in the charge-transfer resistance.     

Facile Construction of 3D Reduced Graphene Oxide Wrapped Ni3S2 Nanoparticles on Ni Foam for High‐Performance Asymmetric Supercapacitor Electrodes

3D reduced graphene oxide (rGO)‐wrapped Ni₃S₂ nanoparticles on Ni foam with porous structure is successfully synthesized via a facile one‐step solvothermal method. This unique structure and the positive synergistic effect between Ni₃S₂ nanoparticles and graphene can greatly improve the electrochemical performance of the NF@rGO/Ni₃S₂ composite. Detailed electrochemical measurements show that the NF@rGO/Ni₃S₂ composite exhibits excellent supercapacitor performance with a high specific capacitance of 4048 mF cm^?2 (816.8 F g^?1) at a current density of 5 mA cm^?2 (0.98 A g^?1), as well as long cycling ability (93.8% capacitance retention after 6000 cycles at a current density of 25 mA cm^?2). A novel aqueous asymmetric supercapacitor is designed using the NF@rGO/Ni₃S₂ composite as positive electrode and nitrogen‐doped graphene as negative electrode. The assembled device displays an energy density of 32.6 W h kg^?1 at a power density of 399.8 W kg^?1, and maintains 16.7 W h kg^?1 at 8000.2 W kg^?1. This outstanding performance promotes the as‐prepared NF@rGO/Ni₃S₂ composite to be ideal electrode materials for supercapacitors.     

Successive electrodeposition of polydopamine and PtPd metal on a graphene oxide support for use as anode fuel cell catalysts

Successive electropolymerization of dopamine and electrodeposition of Pd and/or Pt on a graphene oxide (GO) support were used to prepare anode catalysts for low-temperature fuel cells. Transmission electron microscopy images were used to investigate the morphologies and distribution of the prepared catalysts, which showed the metal formed as nanoparticles on the catalysts. The GO surface was favorable for the modification with electropolymerized polydopamine (PDA) and the electrodeposition of metal catalyst nanoparticles using a simple preparation process. The PDA-loaded GO composite was used as a matrix for the dispersion of Pt and Pd nanoparticles. GO could be simultaneously modified by PDA and reduced without using reducing agents. The electrocatalytic performance of the catalysts for the oxidation of selected small molecule fuels (e.g., methanol, ethanol and formic acid) was examined. An outstanding catalytic activity and stability was found for the prepared Pt/Pd/PDA/GO composite, which was attributed to the high active surface area.