Long-range chemical interactions in solid-state reactions: effect of an inert Ag interlayer on the formation of L10-FePd in epitaxial Pd(0 0 1)/Ag(0 0 1)/Fe(0 0 1) and Fe(0 0 1)/Ag(0 0 1)/Pd(0 0 1) trilayers

The effect of 0, 0.5, and 1?μm-thick Ag interlayers on the chemical interaction between Pd and Fe in epitaxial Pd(0?0?1)/Ag(0?0?1)/Fe(0?0?1)/MgO(0?0?1) and Fe(0?0?1)/Ag(0?0?1)/Pd(0?0?1)/MgO(0?0?1) trilayers has been studied using X-ray diffraction, ⁵⁷Fe Mössbauer spectroscopy, X-ray photoelectron spectroscopy, and magnetic structural measurements. No mixing of Pd and Fe occurs via the chemically inert Ag layer at annealing temperatures up to 400?°C. As the annealing temperature is increased above 400?°C, a solid-state synthesis of an ordered L1₀-FePd phase begins in the Pd(0?0?1)/Ag(0?0?1)/Fe(0?0?1) and Fe(0?0?1)/Ag(0?0?1)/Pd(0?0?1) film trilayers regardless of the thickness of the buffer Ag layer. In all samples, annealing above 500?°C leads to the formation of a disordered Fe_xPd_1?x(0?0?1) phase; however, in samples lacking the Ag layer, the synthesis of Fe_xPd_1?x is preceded by the formation of an ordered L1₂-FePd₃ phase. An analysis of the X-ray photoelectron spectroscopy results shows that Pd is the dominant moving species in the reaction between Pd and Fe. According to the preliminary results, the 2.2?μm-thick Ag film does not prevent the synthesis of the L1₀-FePd phase and only slightly increases the phase’s initiation temperature. Data showing the ultra-fast transport of Pd atoms via thick inert Ag layers are interpreted as direct evidence of the long-range character of the chemical interaction between Pd and Fe. Thus, in the reaction state, Pd and Fe interact chemically even though the distance between them is about 10⁴ times greater than an ordinary chemical bond length.     

Indentation studies on 〈1 0 0〉, 〈0 0 1〉 and 〈1 0 1〉 face of ammonium dihydrogen phosphate (ADP) single crystals: A novel nonlinear optical material

In the present work, Vickers microhardness measurements were carried out on different faces i.e. (1 0 0), (0 0 1) and (1 0 1) of ammonium dihydrogen phosphate (ADP) single crystals grown by slow evaporation solution technique at room temperature in the load ranging from 0.2 to 2 N. The obtained results show that the load independent hardness values are 0.8, 0.7 and 0.66 GPa, respectively at different faces of ADP crystal. From the crack length measurements, the fracture toughness values (K_c) was estimated using Evans and Anstis model and the present studies suggest that Evans model is more relevant when compared to Anstis model. The load variation of some mechanical properties viz. brittle index number (B_i) and yield strength (σ_y) for ADP have also been calculated for the first time.     

α-Sexithiophene on Cu(1 1 0) and Cu(1 1 0)-(2 × 1)O: An STM and NEXAFS study

The adsorption of α-sexithiophene (6T) on Cu(1 1 0), Cu(1 1 0)-(2 × 1)O and the mesoscopically patterned Cu-O striped surface have been studied by STM (scanning tunnelling microscopy), XPS (X-ray photoelectron spectroscopy) and NEXAFS (near edge X-ray absorption fine structure). The molecular resolution of the STM allowed to determine the orientation and local order of the molecules in the submonolayer and monolayer regime. It is shown that the 6T molecules align with their long molecular axis along the densely packed copper rows on Cu(1 1 0) and along the Cu-O rows on the Cu(1 1 0)-(2 × 1)O surface. On the striped phase with alternating copper and Cu-O regions the molecules adsorb first on the Cu regions and after complete filling of these regions, on the Cu-O. The orientation is the same on both areas as on the respective pristine surfaces with the only exception that the molecules reorient by 90° if the width of the copper regions is smaller than the molecular length. The NEXAFS measurements allowed for a determination of the adsorption geometry of the molecules: while 6T lies flat on the surface on clean copper, the molecular planes are inclined with an angle as high as 39° with respect to the substrate on (2 × 1)O. For the latter, this inclination angle is 4° higher than in the bulk crystal structure of 6T observed for thicker films to release stress and allow commensurability with the substrate lattice, while for the former it is a result of the aromatic system bonding to the Cu(1 1 0) surface, as confirmed by XPS.     

Quantized (1, 0) ⊕ (0, 1) Fields

We find a mapping between antisymmetric tensormatter fields and the Weinberg 2(2j + 1)-componentbispinor fields. Equations which describethe j = 1 antisymmetric tensor field coincide with the Hammer-Tucker equations entirely and withthe Weinberg ones within a subsidiary condition, theKlein-Gordon equation. A new Lagrangian for the Weinbergtheory is proposed which is scalar and Hermitian. It is built on the basis of the concept ofWeinberg doubles. The origin of acontradiction between the classical theory, the Weinbergtheorem B – A = for quantum relativisticfields, and the claimed longitudity of the antisymmetrictensor field [transformed on the (1, 0) (0, 1)Lorentz group representation] after quantization isclarified. Analogs of the j = 1/2 Feynman–Dysonpropagator are presented in the framework of the j = 1 Weinberg theory.It is then shown that under a definite choice of fieldfunctions and initial and boundary conditions themassless j = 1 Weinberg–Tucker–Hammerequations contain all the information that the Maxwell equationsfor the electromagnetic field have. Thus, the formerappear to be of use in describing some physicalprocesses.     

Influence of cold-rolling texture and heating rate on {1 1 0}〈0 0 1〉 development in inhibitor-free 3%Si–Fe sheets

This paper presents cold-rolling and annealing methods to obtain a high-magnetic induction in inhibitor-free 0.1-mm-thick 3% silicon–iron sheets containing 18 or 150 ppm sulfur. In case of the two-step cold-rolling, the sheets containing 150 ppm sulfur showed a strong {1 0 0} final texture at 400 °C/h, and some fraction of {1 1 0} component was observed at 25 °C/h. However, three-step cold-rolling resulted in a sharp {1 1 0}〈0 0 1〉 final texture at 25 °C/h. This is due to the difference in intensity ratio of {1 0 0}〈0 1 1〉 to {1 1 1}〈1 1 2〉 in the cold-rolling texture which influences the nucleation of {1 1 0}〈0 0 1〉 component and the selective growth kinetics of various grains. In case of 18 ppm sulfur, the final texture was mainly composed of a sharp {1 1 0}〈0 0 1〉 component even at 400 °C/h, due to the relatively low segregation concentration.     

CrO2块体及其(0 0 1)和(1 0 0)表面的电子结构和磁性质

基于密度泛函理论的第一性原理计算,我们研究了CrO2块体以及其(1 0 0)和(0 0 1)表面的磁性和电子结构。CrO2(1 0 0)表面中表面层Cr原子向内收缩,而(0 0 1)表面中的表面层Cr原子却向外伸展;越往内层,原子驰豫幅度越小。由于表面效应。表面层原子的磁矩有了大幅的提升,其中(1 0 0)表面中表面层Cr原子的磁矩最高,为3.03μB。电子结构计算表明,CrO2 (1 0 0)和(0 0 1)表面均保持了块体中良好的半金属性,并且半金属带隙在(1 0 0)表面中受到了进一步的拓宽,因此具有更稳定的半金属性     

Adsorption and decomposition of γ-butyrolactone on Pd(1 1 1) and Pt(1 1 1)

The adsorption and thermal chemistry of γ-butyrolactone (GBL) on the (1 1 1) surface of Pd and Pt has been investigated using a combination of high resolution electron energy loss spectroscopy (HREELS) and temperature programmed desorption (TPD). HREELS results indicate that GBL adsorbs at 160 K on both surfaces through its oxygenate functionality. On Pd(1 1 1), adsorbed GBL undergoes ring-opening and decarbonylation by 273 K to produce adsorbed CO and surface hydrocarbon species. On Pt(1 1 1), very little dissociation is observed using HREELS, with almost all of the GBL simply desorbing. TPD results are consistent with decarbonylation and subsequent dehydrogenation reactions on Pd(1 1 1), although small amounts of CO₂ are also detected. TPD results from Pt(1 1 1) indicate that a small proportion of adsorbed GBL (perhaps on defect sites) does undergo ring-opening to produce CO, CO₂, and H₂. These results suggest that the primary dissociation pathway for GBL on Pd(1 1 1) is through O-C scission at the carbonyl position. Through comparisons with previously published studies of cyclic oxygenates, these results also demonstrate how ring strain and functionality affect the ring-opening rate and mechanism.     

Growth process and structure of Fe/Si(1 1 1) ultrathin film: Transition from single-domain Fe(1 1 1)/Si(1 1 1) to β-FeSi2

The growth processes and structures of Fe/Si(1 1 1) ultrathin films grown by solid-phase reactive epitaxy were investigated by coaxial impact-collision ion scattering spectroscopy (CAICISS). It has been revealed that the Fe(1 1 1) thin films with a bcc-type structure were epitaxially grown on a Si(1 1 1) crystal, even at room temperature, and formed a single-domain structure: Fe(1 1 1)∥Si(1 1 1). After annealing at above 600 °C, the Fe(1 1 1) films were transformed into β-FeSi₂ via the collapse of the bcc-type structure to an amorphous or polycrystalline structure. On the basis of the thickness dependences of the growth processes, this phenomenon was discussed in terms of the diffusion of Si into Fe thin films.     

The γ-Fe formation in epitaxial Cu(0 0 1)/Fe(0 0 1) thin films by the solid-state synthesis: Structural and magnetic features

The γ-Fe formation in epitaxial Cu(0 0 1)/Fe(0 0 1) bilayers with the annealing temperature increasing has been studied. Using Mössbauer spectroscopy, X-ray diffraction, and magnetic analysis, structural and chemical characterization of the interface between cooper and iron layers has been performed. After annealing at 850 °C and subsequent cooling to room temperature, paramagnetic γ-Fe(0 0 1) precipitates with an average size of 30 nm coherent to a Cu(0 0 1) matrix form. Conditions of intermixing and the γ-Fe formation at the Cu/Fe interface are explained in terms of the solid-state synthesis in thin films. Specific features of the martensitic transition γ↔α are discussed.     

氨分子在0_0~0和2_0~1带的选择光离解

本文利用脉冲紫外激光(UV)选择激发氨分子到A~1A″_2电子激发态的两个最低振动能级υ′_2=0和υ′_2=1(ν_2振动),然后检测新生态H原子的飞行谱(TOF),研究了氨分子的光碎片动力学。光谱证实了最近所测的离解能D_0~0(H-NH_2)=4.645eV;绝大多数生成的NH_2(X~2B_1)基处于非振动激发,但是具有围绕a惯性轴的高度转动激发。通过NH_3(A)的υ′_2=1光离解产生的NH_2(X)基具有较高的内部激发,并且显示了在N=K_a转动能级上的反转布居。     

Surface studies of 2,4-pentanedione on γ-Al2O3/NiAl (1 0 0) and NiAl (1 0 0)

The chemical compound 2,4-pentanedione (Hacac) has been shown to etch the oxidized metal surfaces metals such as copper and nickel, but not their unoxidized surfaces. Here it is shown that on the γ-Al₂O₃/NiAl (1 0 0) surface (oxidized NiAl (1 0 0)) etching of aluminum occurs at 170 K and 750 K. Reflection-absorption infrared spectroscopy (RAIRS) is used to show that Hacac binds to both the clean, metallic and oxidized surfaces, but decomposition and combustion products dominate on the metallic surface and no etching occurs. The binding process that involves a deprotonation reaction of the enol species was identified by redshift in the carbonyl peaks and the appearance of an Al-H peak observed in the IR spectrum. The implication of these results is that there is both an unusual low temperature and high temperature etching of the alumina by bound acac.     

First-principles study of thiophene on β-SiC (0 0 1)-(2×1) surface

In this work, we performed density functional calculations to examine the molecular adsorption states of thiophene on β-SiC(0 0 1)-2×1 surface. A number of possible adsorption geometries are considered into two groups as the polymeric thiophene chain and the individual molecules covalently bonded onto the surface. The results show that the polymeric chain on the surface is the less stable adsorption case and individual arch like adsorption case structure is more stable than others. In all adsorption cases, the adsorbed SiC surfaces are characterized as different semiconductors.     

对2 0 1 5年高考物理四川卷第1 0题的探讨

高考物理力电综合题历来是学生感觉很困难的题, 教师也时不时在这些题上出问题, 由此就2 0 1 5年高 考四川卷第1 0题进行了深入研究, 对命题中出现的问题进行讨论, 并提出相关建议     

A selective [4 + 2]-like cycloaddition of α, β-unsaturated ketone on Si(1 1 1)-7 × 7

The interaction of ethyl vinyl ketone (EVK) with Si(1 1 1)-7 × 7 has been investigated using high-resolution electron energy loss spectroscopy (HREELS), X-ray photoelectron spectroscopy (XPS) and density functional theory (DFT) calculations. The disappearance of both stretching vibrations of CH₂ (3099 cm⁻¹) and CO (1684 cm⁻¹) coupled with the appearance of new CC stretching mode (1660 cm⁻¹) in the HREELS spectra of chemisorbed EVK clearly demonstrates the direct involvement of conjugated CC and CO bonds to form a SiC¹H₂C²HC³(C⁴H₂C⁵H₃)OSi surface species via [4 + 2]-like cycloaddition in a highly selective manner. In addition, XPS studies show that the C1s binding energies of C¹/C² and C³ upon chemisorption display chemical downshifts of 0.8 eV and 2.2 eV, respectively, further confirming the proposed [4 + 2]-like cycloaddition reaction for the EVK/Si(1 1 1)-7 × 7 system. DFT theoretical calculations suggest that the proposed [4 + 2]-like cycloadduct is thermodynamically most favorable.     

A study on the magnetic properties of carbon-doped (1 1 2? 0) ZnO thin films

By using the first principle method based on density functional theory (DFT), a study on the electronic structure and the ferromagnetic stability in C-doped (1 1 2¯ 0) ZnO thin films was conducted. It was found that the thin films have a FM ground state for a majority of configurations. It was also found that C atoms in the thin films have a clear clustering tendency. The ferromagnetism (FM) can be attributed to the coupling between C energy levels. The results showed that oxygen vacancies cannot stabilize the FM coupling of C-doped ZnO thin films. However, zinc vacancies can stabilize the FM coupling of the thin films, which indicates that hole-carriers play a crucial role in the observed FM behavior. In addition, the strain effect on the FM of C-doped ZnO thin films was also analyzed.     

Bi0:9-xGdxLa0:1FeO3的磁性

详细地研究了Bi0:9-xGdxLa0:1FeO3 (x=0.3,0.5,0.6和0.7)的磁化强度(M)和矫顽场随温度(T)的变化． 实验发现， 在一定温度范围内，M-T曲线上出现异常的负磁矩； 矫顽场与温度的关系不是单调变化的， 而是在温度补偿点到最大值． 这些结果表明Bi0:9-xGdxLa0:1FeO3体系中Gd和Fe磁晶格呈反铁磁耦合．但由于Gd离子和Fe离子的磁矩不相等，导致该体系中存在亚铁磁性．     

Final state interaction in B 0 → J/ψρ0 1

In this research, the hadronic decay of B ⁰ → J/φρ⁰ is analyzed by using the QCD factorization (QCDF) and final state interaction (FSI). The D ^+(*) D ^?(*) for d $\bar d$ and D ^0(*) $\bar D^{0(*)}$ for u $\bar u$ contributions via the exchange of charmed mesons are chosen for the intermediate states. These amplitudes are calculated by using QCDF and used in the absorptive part of the diagrams. The experimental branching ratio of B ⁰ → J/φρ⁰ decay is (2.7 ± 0.4) × 10^?5 and our results according to the QCDF method and FSI are 0.87 × 10^?5 and (0.057–4.18) × 10^?5, respectively.     

Ab initio investigation of tensile strengths of metal(1 1 1)/α-Al2O3(0 0 0 1) interfaces

Ab initio calculations using plane wave pseudopotential method within density funtional theory are applied to investigate mechanical and electronic properties of Al-terminated Me(1 1 1)/Al₂O₃(0 0 0 1) (Me = Al, Ag, Cu, Nb) interfaces. Stress–displacement relationships of separation perpendicular to the interface are calculated. It is shown that obtained results such as work of separation and tensile strength can be understood from electronic structure.