Intense DC beam nonlinear transport-analysis & simulation

The intense dc beam nonlinear transport was analyzed with the Lie algebraic method, and the particle trajectories of the second order approximation were obtained. Based on the theoretical analysis a computer code was designed. To get self-consistent solutions, iteration procedures were used in the code. As an example, we calculated a beam line (drift-electrostatic quadrupole doublet-drift). The results agree to the results calculated by using the PIC method.     

Numerical simulation for space charge dominated beam transport

To simulate the intense bunched beam transport, a computer program LEADS-3D has been developed. The particle trajectories are analysed with the Lie algebraic method. The third order approximation of the trajectory solutions is made with space charge forces off, and the second order approximation is made with space charge forces on. The particle distribution in the 3D ellipsoid is uniform or Gaussian. Most of the conventional beam optical elements are incorporated in the code. The optimization procedures are provided to fit the beam lines to satisfy the given optical conditions.     

强流束在四极磁铁中传输的矩阵法与程序设计

强流脉冲束传输的计算是一个相当复杂的问题, 因为不同类型的粒子束分布产生不同的空间电荷场, 而在束流运动过程中, 空间电荷场也在不断地变化, 而且粒子运动的轨迹与空间电荷势又是相互依赖的, 因此需要求得一个自洽解。采用矩阵法分析了非强流脉冲束流与强流脉冲束流在四极磁铁中传输的矩阵, 并编写了束流在四极磁铁等元件中的传输计算程序, 程序采用迭代计算方法获得自洽解。程序运行时, 可以进行直观的图形显示。It is very difficalt to calculate the nonlinear transport of a intense beam, because the particle trajectories depend on the electric potentials excited by the particle beams, and the electric potentials of the beams depend on the particle trajectories and the particle distributions in the phase spaces. So, it is necessary to solve the problem by iterations to get self consistent solutions.We use transport matrix method to analyze the transportation in quadrupole magnet of non intense pulsed beam and intense pulsed beam respectively, and write a computer code for the pulsed beam transporting in quadrupole magnet. The self consistent solution can obtained by using iteration calculation method. During the calculation, the result can be shown by the prompt graph.     

Development of 2D particle-in-cell code to simulate high current,low energy beam in a beam transport system

A code for 2D space-charge dominated beam dynamics study in beam transport lines is developed. The code is used for particle-in-cell (PIC) simulation of z-uniform beam in a channel containing solenoids and drift space. It can also simulate a transport line where quadrupoles are used for focusing the beam. Numerical techniques as well as the results of beam dynamics studies are presented in the paper.      

Computer simulations for intense continuous beam transport in electrostatic lens systems

A code LEADS based on the Lie algebraic analysis for the continuous beam dynamics with space charge effect in beam transport has been developed. The program is used for the simulations of axial-symmetric and unsymmetrical intense continuous beam in the channels including drift spaces, electrostatic lenses and DC electrostatic accelerating tubes. In order to get the accuracy required, all elements are divided into many small segments, and the electric field in the segments is regarded as uniform field, and the dividing points are treated as thin lenses. Iteration procedures are adopted in the program to obtain self-consistent solutions. The code can be used in the designs of low energy beam transport systems, electrostatic accelerators and ion implantation machines.     

Nonlinear Compton scattering of strong laser radiation on channeled particles in a crystal

A version for intense γ-ray radiation based on the multiphoton scattering of strong laser radiation on relativistic particle beam channeled in a crystal is proposed. The incident laser beam and charged particles beam are counter-propagating and the laser radiation is resonant to the energy levels of transversal motion of channeled particles.     

强流直流束在螺线管透镜中传输的Lie映射

用Lie代数方法分析了强流直流束在螺线管透镜中的传输, 考虑了两种情况：一种情况是外磁场力大于空间电荷力, 另一种情况是外磁场力小于空间电荷力. 得到两种情况下的传输矩阵. 分析结果编制成了程序, 并计算了ECR离子源之后的束流传输系统.     

An overview of design for CSNS/RCS and beam transport

The China Spallation Neutron Source (CSNS) is the first accelerator-based pulsed neutron source in China. Its accelerators are made up of an 80 MeV H⁻ linac, a Rapid Cycling Synchrotron (RCS) and two beam transport lines. RCS accumulates and accelerates protons to the design energy of 1.6 GeV, and extracts high energy beam to strike the target. The overview of RCS is presented, and the key problems of the physics design are discussed. The two beam transport lines, from linac to RCS and from RCS to the target, are also introduced.

     

直线变压器驱动源磁芯能量传递效率

磁芯是直线变压器驱动源(LTD)的关键部件之一,起着初、次级能量传递和次级电压感应叠加的作用,磁芯的能量传递效率对LTD系统的效率、体积和重量影响显著。对LTD系统中影响磁芯能量传递效率的原因进行了初步的分析,并利用Pspice软件的非线性磁芯模型对磁芯的工作过程和损耗进行了模拟计算,最后对LTD磁芯的能量传递效率进行了初步的实验研究,在工作电压为20 kV时、脉宽约220 ns时,在2.8 Ω负载上获得了大于60%的能量传递效率。     

Betatron resonance crossing during the intense beam bunching

In the process of bunching an intense beam, the betatron oscillation frequency of particles changes due to a growth in their momentum rejection (in the presence of chromaticity) and changes in the Coulomb shift. These changes lead to the intersection of nonlinear betatron resonances. A mathematical model of the dynamics of ions in the process of bunching an intense beam has been built in order to assess the influence of transverse betatron resonances on the motion of particles. This model takes into account the influence of space charge on the longitudinal and transverse oscillations of particles in the presence of one- and two-dimensional betatron resonances. An analysis of the motion of particles near the one- and two-dimensional third-order resonances is given. Results of the numerical simulation of particle losses and emittance growth in the process of bunching an intense beam in the storage ring at the Institute for Theoretical and Experimental Physics (ITEP) are presented.     

Self-focussing of a laser beam in a multiply ionized,absorbing plasma

Using a numerical code we have studied self-focussing of an intense laser beam which is propagating through a multiply-ionized absorbing plasma. The effecient self-focussing threshold has been calculated as a function of various pulse and plasma parameters.     

“神龙-I”直线感应加速器束流输运系统设计

 系统分析了强流相对论电子束在输运过程中影响束流品质的几种因素,针对束流不同能区凸现的主要矛盾,采取对应性措施以抑制空间电荷效应、束包络振荡和束心横向运动。所有措施归结到束流输运系统设计上表现为合适的束输运半径和匹配磁场的选取,提出了束流输运磁场配置的一般策略,初步设计了“神龙 I”直线感应加速器束流输运系统的总体布局。     

强流束在二极磁场中传输的模拟计算

为了研究空间电荷力对束流在二极磁场中传输的影响,从理论上用矩阵法分析非强流脉冲束流与强流脉冲束流在二极磁场中的传输矩阵,编写了束流在二极磁场等元件中传输的计算程序。用Powell优化方法计算非强流束传输实现给定的光学条件,用迭代方法计算强流束传输获得自洽解。在不同束流流强条件下,运用该程序与其他程序进行了模拟计算,并对模拟结果进行了比较分析。模拟结果表明:束流流强越大,束流包络曲线横向发散越显著,空间电荷效应越强。     

“神龙—Ⅰ”直线感应加速器束流输运系统设计

系统分析了强流相对论电子束在输运过程中影响束流品质的几种因素,针对束流不同能区凸现的主要矛盾,采取对应性措施以抑制空间电荷效应,束包络振荡和束心横向运动,所有措施归结到束流输运系统设计上表现为合适的束输运半径和匹配磁场的选取,提出了束流输运磁场配置的一般策略,初步设计了“神龙－Ⅰ”直线感应加速器束流输运系统的总体布局。     

Electrodynamics of hard superconductors in crossed magnetic fields

A model systematically accounting for the cutting of Abrikosov flux lines has been developed for the critical state of a hard superconductor in crossed dc and ac magnetic fields. The electrodynamic equations have been derived by minimizing the Gibbs free energy calculated using the proposed two-velocity hydrodynamic model. One velocity describes the motion of the vortex lattice as a whole, and the other describes the relative motion of the two intersecting sublattices. The resulting equations yield as special cases the previously known electrodynamic equations for hard superconductors. The model provides a natural explanation for the suppression of dc magnetization by a transverse ac magnetic field observed in our experiments. Zh. éksp. Teor. Fiz. 111, 1071–1084 (March 1997)     

超声分子束注入模型与流体输运程序的耦合

将超声分子束注入模型加入到流体输运程序ONETWO 中,为ONETWO 程序提供了重要的粒子源和电子、离子热源项。在ONETWO 程序物理模型中加入超声分子束注入模型,修改TPSMBI 程序并将其耦合到 ONETWO 程序中。运用耦合后的ONETWO 程序模拟研究了喷气法与超声分子束注入产生的源项。将超声分子束注入模型加入到ONETWO 程序中不仅可以为相关的实验分析提供一种重要的工具,也可为未来装置(如中国聚变工程实验堆)的物理设计提供重要的粒子和能量源信息。     

相对论返波管振荡器齿状阴极

研究了一种齿状阴极的电子束产生传输过程以及对相对论返波管振荡器产生高功率微波的影响。基于SINUS881加速器,利用束流轰击金属靶观测齿状阴极产生电子束在不同轴向位置上的角向分布,并开展了基于环形阴极和齿状阴极的X波段相对论返波管振荡器的实验研究。对不同齿数及尺寸对电子束流特性、器件输出微波功率和脉冲宽度的影响进行了分析。实验结果表明:当阴极的齿数增加到一定数量时,电子束的横向运动使得电子束在径向逐渐趋于分布均匀;与均匀环形阴极的打靶结果近似,此时,电子束对于相对论返波管振荡器产生微波的功率和脉宽影响不大。     

HL─1装置等离子体输运与锯齿特性的数值研究

本文利用一维圆柱等离子体输运编码（ＴＲＡＮＰＹ），编制了模拟锯齿振荡的大型编码（ＳＡＷＭＯＤ）。对锯齿振荡的研究，我们选用了两种具有代表性的理论模型：重联模型和湍流模型，后者特别适用于低ｑａ放电的锯齿特性研究。重联模型的锯齿振荡是由于磁力线的完全重联引起的，而湍流模型的锯齿振荡是因为微观湍流或磁力线的随机化而产生的。最后，我们将ＨＬ─１装置的一次典型高密放电的参数代入（ＳＡＷＭＯＤ）编码，运算结果表明，重联模型和湍流模型均能解释实验观测的锯齿现象，理论模拟与实验结果符合较好。     

Features and Limiting Characteristics of the Heating of a Substance by a Laser-Accelerated Fast Electron Beam

The features of plasma formation in a substance heated by a laser-accelerated fast electron beam have been studied. These features are related to the ratio of the heating rate to the rate of energy loss because of radiation processes and electronic thermal conductivity, which are governed by the dependence of the energy of the heating beam particles on the beam intensity, which is characteristic of laser-driven electron acceleration. It has been shown that energy losses increase with the beam intensity and significantly limit the maximum temperature of the formed plasma. The possibility of generating an intense γ-radiation pulse of a nonnuclear origin because of the bremsstrahlung of laser-accelerated electrons has been discussed.