Effect of microencapsulation using soy protein isolate and gum arabic as wall material on red raspberry anthocyanin stability,characterization, and simulated gastrointestinal conditions

This study involves microencapsulation of anthocyanin extract (AC) from red raspberry using a freeze drying technique involving ultrasonication of soy protein isolate (SPI), gum arabic (AG), and their combination. Analyses included microcapsule properties, encapsulation efficiency, antioxidant capacity using the DPPH assay, Fourier-transform infrared spectroscopy (FTIR), color, thermal stability, stability during storage, morphology, and simulated gastrointestinal conditions. Encapsulation efficiency (EE) ranged from 93.05% to 98.87% for all microcapsules. The morphology of microcapsules by scanning electron microscopy (SEM) indicated a broken glass shape, with mean size of microcapsules ranging from 21.07 ± 2.71 μm to 48.19 ± 2.33 μm using Mastersizer analyzer. A good relationship obtained between zeta potential (ZP) and FTIR spectrum indicated that there is a chemical cross linking interaction between wall material and core material. All microcapsules enhanced the thermal stability of AC in the temperature range 80–114 °C. Furthermore, AC retention (up to 48%) during storage at 37 °C for 60 days revealed that treatment H combination of SPI and AG was best. In addition, SPI and AG combination presented good release behavior under simulated gastrointestinal conditions compared with unencapsulated anthocyanin.     

Improvement of betalains stability extracted from red dragon fruit peel by ultrasound-assisted microencapsulation with maltodextrin

Natural betalains can be potential food additives because of their antioxidant activities, but they have poor thermal stability. In this study, betalains were extracted from red dragon fruit peel, and then encapsulated with maltodextrin by ultrasound method to increase the physicochemical properties of betalains microcapsules. The encapsulation efficiency of the betalains was above 79%, and the particle size and Zeta potential values were 275.46 nm and −29.01 mV, respectively. Compared to the control sample, onset temperature and DPPH free radical scavenging of betalains microcapsules under the modest ultrasound treatment (200 W, 5 min) was increased by 1.6 °C and 12.24%, respectively. This increase could be due to the ability of ultrasonification to create interactions between maltodextrin and betalains (as evidenced by FT-IR). Therefore, modest ultrasound treatment can be used for microcapsulation to improve the stability of betalains, and then expand the application of betalains in heat processed food field.     

Optimization of ultrasound extraction of functional compound from makiang seed by response surface methodology and antimicrobial activity of optimized extract with its application in orange juice

An ultrasound-assisted extraction (UAE) was optimized for the extraction of bioactive compound (total phenolic compound and total flavonoid content) with antioxidant activity (DPPH and FRAP assays) using response surface methodology based on Box-Behnken design (BBD). The effect of extraction temperature (X₁: 30–70 °C), extraction time (X₂: 25–45 min) and amplitude (X₃: 30–50%) were determined. In addition, antimicrobial activity and application of optimized makiang seed extract (MSE) were also evaluated. Results showed that the optimum condition of UAE were X₁: 51.82 °C, X₂: 31.87 min and X₃: 40.51%. It was also found that gallic acid was the major phenolic compound of optimized MSE and its minimum inhibitiory concentration (MIC) and minimum bactericidal concentration (MBC) was between 1.56 - 6.25 and 25–100 mg/mL respectively. The addition of MSE could enhance the stability of orange juice and shelf life extension was also obtained. This research finding suggests the beneficial opportunities for ultrasound-assisted extraction for the production of bioactive compound from makiang seed with antioxidant activity leading to an application in medicinal and functional food industry.     

Effect of ultrasound on the preparation of soy protein isolate-maltodextrin embedded hemp seed oil microcapsules and the establishment of oxidation kinetics models

In this study, microcapsules were prepared by spray drying and embedding hemp seed oil (HSO) with soy protein isolate (SPI) and maltodextrin (MD) as wall materials. The effect of ultrasonic power on the microstructure and characteristics of the composite emulsion and microcapsules was studied. Studies have shown that ultrasonic power has a significant impact on the stability of composite emulsions. The particle size of the composite emulsion after 450 W ultrasonic treatment was significantly lower than the particle size of the emulsion without the ultrasonic treatment. Through fluorescence microscopy observation, HSO was found to be successfully embedded in the wall materials to form an oil/water (O/W) composite emulsion. The spray-dried microcapsules showed a smooth spherical structure through scanning electron microscopy (SEM), and the particle size was 10.7 μm at 450 W. Fourier transform infrared (FTIR) spectroscopy analysis found that ultrasonic treatment would increase the degree of covalent bonding of the SPI-MD complex to a certain extent, thereby improving the stability and embedding effect of the microcapsules. Finally, oxidation kinetics models of HSO and HSO microcapsules were constructed and verified. The zero-order model of HSO microcapsules was found to have a higher degree of fit; after verification, the model can better reflect the quality changes of HSO microcapsules during storage.     

Do ultrasonic field effects upon the polyphenolics profile of propolis extracts improve their antioxidant and antimicrobial activity?

Ultrasound-assisted extraction (UAE) was applied for polyphenols extraction from Romanian propolis, followed by comparison with previous maceration work. The effects consisted not only in time reduction and extraction yield increase, but also in polyphenolics profile modification in terms of flavonoids / polyphenolic acids ratio. The operating parameters were ultrasounds (US) field exposure time (10–100 min), solvent composition (water, 25 % and 50 % ethanolic solutions, w/w), and liquid:solid ratio (2:1, 4:1 and 6:1, w:w), while keeping temperature constant. 24 polyphenolic derivatives were quantified by UHPLC-HRMS. UAE favored the extraction of pinocembrin, isorhamnetin and chrysin in water and 25 % ethanol, leading to different profiles than maceration, and further influences upon the antioxidant and antimicrobial activity. All extracts demonstrated increased antibacterial and antifungal activity compared to maceration, particularly the 50 % ethanolic extracts, which presented a three-times larger antioxidant capacity. Chemometric methods (Principal Component Analysis – PCA and Partial Least Squares Regression – PLS) and a saturation type model were used to correlate the polyphenolics profiles and antioxidant capacity. Experimental and modelling results concluded that 50 % ethanolic solutions and UAE represent the favorable operating conditions in terms of yield and extracts quality.     

Optimisation of the ultrasound-assisted extraction of betalains and polyphenols from Amaranthus hypochondriacus var. Nutrisol

The present study optimised the ultrasound-assisted extraction (UAE) of bioactive compounds from Amaranthus hypochondriacus var. Nutrisol. Influence of temperature (25.86–54.14 °C) and ultrasonic power densities (UPD) (76.01–273.99 mW/mL) on total betalains (BT), betacyanins (BC), betaxanthins (BX), total polyphenols (TP), antioxidant activity (AA), colour parameters (L*, a*, and b*), amaranthine (A), and isoamaranthine (IA) were evaluated using response surface methodology. Moreover, betalain extraction kinetics and mass transfer coefficients (K_La) were determined for each experimental condition. BT, BC, BX, TP, AA, b*, K_La, and A were significantly affected (p < 0.05) by temperature extraction and UPD, whereas L*, a*, and IA were only affected (p < 0.05) by temperature. All response models were significantly validated with regression coefficients (R²) ranging from 87.46 to 99.29%. BT, A, IA, and K_La in UAE were 1.38, 1.65, 1.50, and 29.93 times higher than determined using conventional extraction, respectively. Optimal UAE conditions were obtained at 41.80 °C and 188.84 mW/mL using the desired function methodology. Under these conditions, the experimental values for BC, BX, BT, TP, AA, L*, a*, b*, K_La, A, and IA were closely related to the predicted values, indicating the suitability of the developed quadratic models. This study proposes a simple and efficient UAE method to obtain betalains and polyphenols with high antioxidant activity, which can be used in several applications within the food industry.     

Cyclodextrin-conjugated nanocarrier for magnetically guided delivery of hydrophobic drugs

A magnetic nanosystem that simultaneously implements the cyclodextrin–drug complexation power, bioadhesive property of gum arabic (GA) and inherent magnetic properties of Fe₃O₄ nanoparticles, has recently been reported. In this study, a magnetic nanocarrier was fabricated by conjugating 2-hydroxypropyl-cyclodextrin (HCD) onto the gum arabic modified magnetic nanoparticles (GAMNP). The analyses of transmission electron microscopy (TEM) and dynamic light scattering (DLS) revealed that the product had a mean diameter of 14.8 nm and a mean hydrodynamic diameter of 29.3 nm. This nanocarrier showed good loading efficiency for ketoprofen. In addition, the in vitro release profile of ketoprofen from HCD-GAMNP was characterized by an initial fast release followed by a delayed release phase. In view of the better biocompatibility and the combined properties like specific targeting, complexation ability with hydrophobic drugs makes the nanosystem an exciting prospect for drug delivery.     

High solids emulsions produced by ultrasound as a function of energy density

The use of emulsifying methods is frequently required before spray drying food ingredients, where using high concentration of solids increases the drying process yield. In this work, we used ultrasound to obtain kinetically stable palm oil-in-water emulsions with 30 g solids/100 g of emulsion. Sodium caseinate, maltodextrin and dried glucose syrup were used as stabilizing agents. Sonication time of 3, 7 and 11 min were evaluated at power of 72, 105 and 148 W (which represents 50%, 75% and 100% of power amplitude in relation to the nominal power of the equipment). Energy density required for each assay was calculated. Emulsions were characterized for droplets mean diameter and size distribution, optical microscopy, confocal microscopy, ζ-potential, creaming index (CI) and rheological behavior. Emulsions presented bimodal size distribution, with D_[3,2] ranging from 0.7 to 1.4 μm and CI between 5% and 12%, being these parameters inversely proportional to sonication time and power, but with a visual kinetically stabilization after the treatment at 148 W at 7 min sonication. D_[3,2] showed to depend of energy density as a power function. Sonication presented as an effective method to be integrated to spray drying when emulsification is needed before the drying process.     

Preparation and surface encapsulation of hollow TiO nanoparticles for electrophoretic displays

Hollow black TiO nanosparticles were obtained via deposition of inorganic coating on the surface of hollow core-shell polymer latex with Ti(OBu)₄ as precursor and subsequent calcination in ammonia gas. Hollow TiO particles were characterized by scanning electron microscope, transmission electronic microscopy, X-ray diffraction, and thermogravimetric analysis. Encapsulation of TiO via dispersion polymerization was promoved by pretreating the pigments with 3-(trimethoxysilyl) propyl methacrylate, making it possible to prepare hollow TiO-polymer particles. When St and DVB were used as polymerization monomer, hollow TiO-polymer core-shell particles came into being via dispersion polymerization, and the lipophilic degree is 28.57%. Glutin-arabic gum microcapsules containing TiO-polymer particles electrophoretic liquid were prepared using via complex coacervation. It was founded that hollow TiO-polymer particles had enough electrophoretic mobility after coating with polymer.     

Ultrasound-assisted multilayer Pickering emulsion fabricated by WPI-EGCG covalent conjugates for encapsulating probiotics in colon-targeted release

This study demonstrated the influences of ultrasound-assisted multilayer Pickering double emulsion capsules on the pasteurization and gastrointestinal digestive viability of probiotic (L. plantarum) strain liquid. Firstly, the role of ultrasonic homogenization on the morphology of W₁/O/W₂ double emulsions were studied. The double emulsion formed by ultrasonic intensity at 285 W had a single and narrow distribution with smallest droplet size. The double emulsion particles were then coated with chitosan(Chi), alginate (Alg), and CaCl₂(Ca). The multilayer emulsion after pasteurization and gastrointestinal digestion both had the highest viability at 5 coating layers, but its particle size (108.65 μm) exceeded the limit of human oral sensory (80 μm). It could be noted that the deposition of 3–4 layers of coating had similar activity after pasteurization/GIT digestion. And droplets with 3 layers of coating were the minimum and most available formulation for encapsulated probiotics (L. plantarum). Hence, the results suggest that the use of ultrasound-assisted multilayer emulsions encapsulated with probiotics in granular food and pharmaceutical applications is a promising strategy.     

Synergetic effects of ultrasound and sodium alginate coating on mass transfer and qualities of osmotic dehydrated pumpkin

This research studied the effects of combined ultrasound and 3% sodium alginate (SA) coating pretreatment (US + Coat) on mass transfer kinetics, quality aspects, and cell structure of osmotic dehydrated (OD) pumpkin. The results of the pretreatment were compared with the results of control (non-pretreated osmotic dehydration) and other three pretreatment methods, which were 1) ultrasound in distilled water for 10 min (USC), 2) ultrasound in 70% (w/w) sucrose solution (US) for 10, 20 and 30 min, and 3) coating with 1%, 2%, 3% (w/w) SA. The coating pretreatments with SA resulted in a higher water loss (WL) but lower water activity and solid gain (SG) than other treatments. US pretreatments resulted in the highest effective diffusion coefficients of water (D_w) and solid (D_s) but the cell structure of the product was deformed. The 3% SA coating treatment had the highest WL/SG (5.28) but with the longest OD time (12 h). Using the US + Coat pretreatment gave satisfactory high WL/SG (5.18), D_w (1.09 × 10⁻¹⁰ m²s⁻¹) and D_s (5.15 × 10⁻¹¹ m²s⁻¹), reduced the OD time to 9 h, and preserved the cell structure of the product. This research suggests that US + Coat pretreatment can be an effective processing step in the production of OD pumpkin.     

Comparison of the effect of extraction methods on the quality of green coffee oil from Arabica coffee beans: Lipid yield,fatty acid composition,bioactive components,and antioxidant activity

In this study, ultrasonic/microwave-assisted extraction (UMAE), microwave-assisted extraction (UAE), ultrasound-assisted extraction (UAE), and pressurized liquid extraction (PLE) were applied to extract green coffee oil (GCO), and the physicochemical indexes, fatty acids, tocopherols, diterpenes, and total phenols as well as antioxidant activity of GCO were investigated and compared. The results indicated that the extraction yield of UMAE was the highest (10.58 ± 0.32%), while that of PLE was the lowest (6.34 ± 0.65%), and linoleic acid and palmitic acid were the major fatty acids in the GCO, ranging from 40.67% to 43.77% and 36.57% to 38.71%, respectively. A large proportion of fatty acids and phytosterols were not significantly influenced by the four extraction techniques. However, tocopherols, diterpenes, total phenols, and the free radical scavenging activity were significantly different among these four GCOs. Moreover, structural changes in the coffee residues were explored by scanning electron microscopy and Fourier transform infrared spectroscopy. Overall, the high antioxidant activity of GCO demonstrated that it can be used as a highly economical natural product in the food and agricultural industries.     

Ultrasonic assisted extraction of polyphenols from bayberry by deep eutectic supramolecular polymer and its application in bio-active film

Ultrasound and deep eutectic supramolecular polymers (DESP) is a novel combination of green extraction method for phytochemicals. In this study, a new type of green extractant was developed: DESP. It is a derivative of deep eutectic solvent (DES) and was prepared by supramolecular polymer unit β-cyclodextrin (β-CD) as hydrogen bond acceptor (HBA) and organic acid as hydrogen bond donor (HBD). The current work focuses on the use of ultrasonic-assisted (UAE) DESP extraction of polyphenolic compounds (PCs) from bayberry. The experimental results showed that DESP synthesized with β-CD and lactic acid (LA) in a ratio of 1:1 (w/w %) had the best extraction effect. And by using a three-level factor experiment and the response surface method, the predicted TPC content is very close to the actual content (28.85 ± 1.27 mg GAE/g). The DESP extract including PCs were further used as plasticizer for chitosan (CS) to prepare highly active green biofilms (DESP-CS). It is possible to reduce the tedious procedures for separating biologically active substances from DESP. The experiment proved that the prepared films have good mechanical properties, plastic deformation resistance, thermal stability and antioxidant activity.     

Facile Preparation and Excellent Ultraviolet Shielding Application of Polyurethane-TiO2 Composite Microcapsules

In this work, butyl stearate, isophorone diisocyanate, and glycerol are used to prepare reticulated polyurethane microcapsules using interfacial polymerization. In addition, anatase nano-TiO₂ is added to prepare TiO₂-polyurethane phase change microcapsules during the polymerization process. Polarized light microscope, scanning electron microscope, Fourier-transform infrared spectroscopy, thermogravimetric, differential scanning calorimeter, and other methods demonstrate the successful preparation of microcapsules, and microcapsules with different TiO₂ content have differences in morphology and performance. It is worth noting that the addition of TiO₂ enhances the thermal stability and mechanical strength of the prepared composite microcapsules. In addition, TiO₂ particles allow the microcapsules to have photocatalytic properties and ultraviolet shielding properties, and the prepared TiO₂-polyurethane composite capsules show good catalytic degradation properties for methyl orange solution. Moreover, the ultraviolet absorption performance of the TiO₂-polyurethane composite microcapsule coating is tested, and the results show that the strength of ultraviolet light is weakened after passing through the coating, indicating that the composite microcapsule can enhance the UV resistance of the coating. This work shows the preparation of multifunctional microcapsules and their potential applications in photocatalysis and UV resistance.     

Physicochemical and antioxidative properties of ultrasound-assisted extraction of mahua (Madhuca longifolia) seed oil in comparison with conventional Soxhlet and mechanical extractions

Ultrasound-assisted solvent extraction (UAE) was applied to extract underutilized Madhuca longifolia seed oil. The effect of extraction time, temperature, solvent type, solvent/sample ratio, and amplitude on the oil yield and recovery were investigated. Approximately 56.97% of oil yield and 99.54% of oil recovery were attained using mild conditions of 35 min, 35 °C, 40% amplitude, isopropanol to acetone (1:1), and solvent to sample (20 mL/g). UAE oil yield and recovery were comparable with Soxhlet extraction (SXE) whilst mechanical pressing (ME) yielded < 50% of UAE recovery. UAE does not affect the fatty acids composition (46% C18:1; 22% C16:0; 21% C18:0, 10% C18:2), and triacylglycerol profile (23% POO, 17% POS, 16% SOO, and 14% POP). Interestingly, UAE extracted oil conferred remarkably (P < 0.05) higher antioxidant capacity (IC₅₀ of DPPH 106.60 mg/mL and ABTS 39.80 mg/mL) than SXE (IC₅₀ of DPPH 810.40 mg/mL and ABTS 757.43 mg/mL) or ME (IC₅₀ of DPPH 622.38 mg/mL and ABTS 392.87 mg/mL).     

Antioxidant and anti-inflammatory polyphenols in ultrasound-assisted extracts from salvilla (Buddleja scordioides Kunth)

Salvilla is a widely distributed plant used in treatments against gastrointestinal disorders due to its phenolic antioxidant and anti-inflammatory potential. Major yield and quality of bioactive polyphenols must be obtained with no degradation during suitable processes such as Ultrasound-Assisted Extraction (UAE), which allows an efficient extraction of metabolites at appropriate parameter conditions. Salvilla extractions were made using UAE and aqueous ethanolic solutions. Variables used in UAE were sonication time, wave amplitude and percentage of ethanol in solvent. Extracts were tested for total flavonoids, antioxidant activity (ABTS, FRAP and ORAC) and an identification and quantification of phenolic compounds was carried out by UPLC-PDA-ESI-MS/MS. Once elected the better extraction conditions, an anti-inflammatory test was performed for this treatment. As a result, total flavonoids content in extracts was 147 to 288 µg catechin equivalents/mg of dry salvilla extract. All extracts have shown good antioxidant activity (86 to 280 mM Trolox eq/mg dry salvilla extract). Flavonoids contents by chromatography were higher than hydroxybenzoic and hydroxycinnamic acids specially the flavone, flavanol and flavanone groups. Treatment T6 (75% ethanol, 30% amplitude and 10 min extraction time) was the best extract in terms of significant flavonols, antioxidant activity, and higher anti-inflammatory potential.     

Nanovesicle encapsulation of antimicrobial peptide P34: physicochemical characterization and mode of action on <Emphasis Type="Italic">Listeria monocytogenes</Emphasis>

Antimicrobial peptide P34, a substance showing antibacterial activity against pathogenic and food spoilage bacteria, was encapsulated in liposomes prepared from partially purified soybean phosphatidylcholine, and their physicochemical characteristics were evaluated. The antimicrobial activity was estimated by agar diffusion assay using Listeria monocytogenes ATCC 7644 as indicator strain. A concentration of 3,200 AU/mL of P34 was encapsulated in nanovesicles and stocked at 4 °C. No significant difference (p > 0.05) in the biological activity of free and encapsulated P34 was observed through 24 days. Size and PDI of liposomes, investigated by light scattering analysis, were on average 150 nm and 0.22 respectively. Zeta potential was −27.42 mV. There was no significant change (p > 0.05) in the physicochemical properties of liposomes during the time of evaluation. The liposomes presented closed spherical morphology as visualized by transmission electron microscopy (TEM). The mode of action of liposome-encapsulated P34 under L. monocytogenes cells was investigated by TEM. Liposomes appeared to adhere but not fuse with the bacterial cell wall, suggesting that the antimicrobial is released from nanovesicles to act against the microorganism. The effect of free and encapsulated P34 was tested against L. monocytogenes, showing that free bacteriocin inhibited the pathogen more quickly than the encapsulated P34. Liposomes prepared with low-cost lipid showed high encapsulation efficiency for a new antimicrobial peptide and were stable during storage. The mode of action against the pathogen L. monocytogenes was characterized.     

Novel synthesis and electrophoretic response of low density TiO-TiO2-carbon black composite

Novel low density TiO-TiO₂-carbon black composite was synthesized, which involved the deposition of inorganic coating on the surface of core-shell latex particles and subsequent removal of latex particles by calcination in high-purity nitrogen. The morphology and interior structure were characterized by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The images exhibited the composite had spherical shape and smooth surface, and the interior structure was hollow or porous. X-ray diffraction peaks (XRD) were mostly in agreement with the standard diffraction patterns of rutile TiO₂. In addition, the observed peaks at 2θ of 43.5°, 50.6° and 74.4° can be indexed to (1 1 1), (2 0 0) and (2 2 0) planes of cubic phase TiO. The X-ray photoelectron spectroscopy (XPS) results indicated that composite consisted of carbon black, TiO and TiO₂. The apparent density of the composite was suitable to 1.62 g cm⁻³, due to density matching with suspending media. Glutin-arabic gum microcapsules containing TiO-TiO₂-carbon black composite electrophoretic liquid were prepared via complex coacervation. The particles in the microcapsules showed excellent electrophoretic mobility under a DC field.     

Vacuum pressure combined with osmosonication as an innovative pre-drying technique for Ghanaian ginger: Evidence from the metabolome and quality characteristics of the dried product

We assessed the impact of selected pretreatment techniques, thus, vacuum-assisted osmotic dehydration (VOD), vacuum-assisted sonication (VSON) and vacuum-assisted osmosonication (VOS) on the metabolomes and quality characteristics of infrared-dried ginger slices. We found marked metabolome differences between the pretreated ginger samples, evidenced by differential amounts of 6-gingerol and 6-shogaol, total phenolic content (TPC), total flavonoid content (TFC) and antioxidant activities. We also found distinct differences in the drying kinetics and sensory characteristics of the pretreated samples. Generally, VOS pretreatment gave the best outcomes. The VOS-pretreated samples contained the highest contents of the marker compounds, TPC, TFC and gave the best antioxidant activity. The VOS-pretreated samples also recorded the shortest drying time and exhibited the best sensory attributes. Overall, the general order observed was, VOS > VSON > VOD > control for all quality parameters examined. VOS pretreatment of ginger before drying therefore holds a great potential for large-scale industrial application.     

Mn-doped activated carbon aerogel as electrode material for pseudo-capacitive supercapacitor: Effect of activation agent

Carbon aerogel (CA) was prepared by a sol-gel polymerization of resorcinol and formaldehyde, and a series of activated carbon aerogels (ACA-X, X = H₃PO₄, K₂CO₃, KOH, and ZnCl₂) were then prepared by a chemical activation using different activation agent (X represented an activation agent). Specific capacitances of activated carbon aerogels were measured by cyclic voltammetry and galvanostatic charge/discharge methods in 6 M KOH electrolyte. Among the samples prepared, ACA-K₂CO₃ showed the highest specific capacitance (152 F/g). In order to combine excellent electrochemical performance of activated carbon aerogel with pseudo-capacitive property of manganese oxide, 7 wt% manganese oxide was doped on activated carbon aerogels (Mn/ACA-X) by an incipient wetness impregnation method. Capacitance measurements revealed that Mn/ACA-K₂CO₃ showed the highest specific capacitance (189 F/g). The enhanced capacitance of Mn/ACA-K₂CO₃ was attributed to the fine pore structure and outstanding electric properties of activated carbon aerogel as well as the faradaic redox reactions of manganese oxide.