Impedance spectroscopy study of Pb<Subscript>2</Subscript>P<Subscript>2</Subscript>O<Subscript>7</Subscript> compound

The lead pyrophosphate, Pb₂P₂O₇, compound was prepared by conventional solid-state reaction and identified by X-ray powder diffractometer. Pb₂P₂O₇ has a triclinic structure whose electrical properties were studied using impedance spectroscopy technique. Both impedance and modulus analysis exhibit the grain and grain boundary contribution to the electrical response of the sample. The temperature dependence of the bulk and grain boundary conductivity were found to obey the Arrhenius law with activation energies E _g = 0.66 eV and E _gb = 0.67 eV, respectively. The scaling behavior of the imaginary part of the complex impedance suggests that the relaxation describes the same mechanism at various temperatures.     

Electrical characterization of the [N(CH<Subscript>3</Subscript>)<Subscript>4</Subscript>][N(C<Subscript>2</Subscript>H<Subscript>5</Subscript>)<Subscript>4</Subscript>]ZnCl<Subscript>4</Subscript> compound

The [N(CH₃)₄][N(C₂H₅)₄]ZnCl₄ compound has been synthesized by a solution-based chemical method. The X-ray diffraction study at room temperature revealed an orthorhombic system with P2₁2₁2 space group. The complex impedance has been investigated in the temperature and frequency ranges 420–520 K and 200 Hz–5 MHz, respectively. The grain interior and grain boundary contribution to the electrical response in the material have been identified. Dielectric data were analyzed using the complex electrical modulus M ^* for the sample at various temperature. The modulus plots can be characterized by full width at half height or in terms of a non-exponential decay function ϕ(t) = exp[(−t/τ) ^β ]. The detailed conductivity study indicated that the electrical conduction in the material is a thermally activated process. The variation of the AC conductivity with frequency at different temperatures obeys the Almond and West universal law.     

Electrical properties,equivalent circuit,and dielectric relaxation studies on [(C<Subscript>3</Subscript>H<Subscript>7</Subscript>)<Subscript>4</Subscript>N]<Subscript>2</Subscript>Cd<Subscript>2</Subscript>Cl<Subscript>6</Subscript> polycrystalline

The Ac electrical conductivity and the dielectric relaxation properties of the [(C₃H₇)₄N]₂Cd₂Cl₆ polycrystalline sample have been investigated by means of impedance spectroscopy measurements over a wide range of frequencies and temperatures, 209 Hz–5 MHz and 361–418 K, respectively. The purpose is to make a difference between the electrical and dielectric properties of the polycrystalline sample and single crystal. Besides, a detailed analysis of the impedance spectrum suggests that the electrical properties of the material are strongly temperature-dependent. Plots of (Z" versus Z') are well fitted to an equivalent circuit model consisting of a series combination of grains and grains boundary elements. Moreover, the temperature dependence of the electrical conductivity in the different phases follows the Arrhenius law and the frequency dependence of σ (ω) follows the Jonscher’s universal dynamic law. Furthermore, the modulus plots can be characterized by full width at half height or in terms of a nonexperiential decay function φ(t) = exp(t/t)^β. Finally, the imaginary part of the permittivity constant is analyzed with the Cole–Cole formalism.     

Spectroscopic properties of Nd<Superscript>3+</Superscript>:CaNb<Subscript>2</Subscript>O<Subscript>6</Subscript> crystal

The absorption spectra, fluorescence spectrum and fluorescence decay curve of Nd³⁺ ions in CaNb₂O₆ crystal were measured at room temperature. The peak absorption cross section was calculated to be 6.202×10⁻²⁰ cm² with a broad FWHM of 7 nm at 808 nm for E//a light polarization. The spectroscopic parameters of Nd³⁺ ions in CaNb₂O₆ crystal have been investigated based on Judd-Ofelt theory. The parameters of the line strengths Ω _t are Ω ₂=5.321×10⁻²⁰ cm²,Ω ₄=1.734×10⁻²⁰ cm²,Ω ₆=2.889×10⁻²⁰ cm². The radiative lifetime, the fluorescence lifetime and the quantum efficiency are 167 μs, 152 μs and 91%, respectively. The fluorescence branch ratios are calculated to be β ₁=36.03%,β ₂=52.29%,β ₃=11.15%,β ₄=0.533%. The emission cross section at 1062 nm is 9.87×10⁻²⁰ cm².     

Structural and electrical properties of pure and H<Subscript>2</Subscript>SO<Subscript>4</Subscript> doped (PVA)<Subscript>0.7</Subscript>(NaI)<Subscript>0.3</Subscript> solid polymer electrolyte

Solid polymer electrolytes (SPE) based on poly-(vinyl alcohol) (PVA)_0.7 and sodium iodide (NaI)_0.3 complexed with sulfuric acid (SA) at different concentrations were prepared using solution casting technique. The structural properties of these electrolyte films were examined by X-ray diffraction (XRD) studies. The XRD data revealed that sulfuric acid disrupt the semi-crystalline nature of (PVA)_0.7(NaI)_0.3 and convert it into an amorphous phase. The proton conductivity and impedance of the electrolyte were studied with changing sulfuric acid concentration from 0 to 5.1 mol/liter (M). The highest conductivity of (PVA)_0.7(NaI)_0.3 matrix at room temperature was 10⁻⁵ S cm⁻¹ and this increased to 10⁻³ S cm⁻¹ with doping by 5.1 M sulfuric acid. The electrical conductivity (σ) and dielectric permittivity (ε′) of the solid polymer electrolyte in frequency range (500 Hz–1 MHz) and temperature range (300–400) K were carried out. The electrolyte with the highest electrical conductivity was used in the fabrication of a sodium battery with the configuration Na/SPE/MnO₂. The fabricated cells give open circuit voltage of 3.34 V and have an internal resistance of 4.5 kΩ.     

Ion conduction and space-charge polarization processes in Li<Subscript>2</Subscript>Ge<Subscript>7</Subscript>O<Subscript>15</Subscript> crystals

The electrical properties of a lithium heptagermanate (Li₂Ge₇O₁₅) crystal have been studied in DC and AC measuring fields at temperatures from 500 to 700 K. In a DC field, a substantial decrease of electrical conductivity σ with time has been detected. On the basis of kinetic dependences σ(t), estimates of the charge carrier diffusion coefficient D have been obtained. In the frequency range 10¹–10⁵ Hz, the spectra of complex impedance ρ*(f) have been measured. The analysis of diagrams in the complex plane (ρ″–ρ′) has been performed within the equivalent circuit approach. It has been shown that, in the considered temperature and frequency intervals, the electrical properties of Li₂Ge₇O₁₅ crystals have been determined by the hopping conduction of interstitial lithium ions A _Li and accumulation of charge carriers near the blocking Pt electrodes.     

Fast ionic conduction in cubic hafnium garnet Li<Subscript>7</Subscript>La<Subscript>3</Subscript>Hf<Subscript>2</Subscript>O<Subscript>12</Subscript>

A new member of the family of garnets with fast lithium ion conduction has been found with the composition Li₇La₃Hf₂O₁₂. The anion arrangement corresponds to the oxygen framework in garnets, e.g., in Ca₃Fe₂Si₃O₁₂. Hafnium is coordinated octahedrally while the lanthanum environment can be described as a distorted cube. Lithium occupies a large number of positions with tetrahedral, trigonal planar, and metaprismatic coordination. Li₇La₃Hf₂O₁₂ shows a lithium bulk ion conductivity of 2.4 × 10⁻⁴ Ω⁻¹ cm⁻¹ at room temperature with an activation energy of 0.29 eV.     

Multinuclear MAS NMR Investigation of Sol-Gel and Ball-Milled Nanocrystalline Ga<Subscript>2</Subscript>O<Subscript>3</Subscript>

⁷¹Ga magic-angle spinning (MAS) nuclear magnetic resonance (NMR) has been used to characterize the structural evolution of nanocrystalline Ga₂O₃ samples prepared by sol-gel and ball-milling techniques. ²⁹Si and ²⁷Al MAS NMR have also been used to characterize silica and alumina Zener pinning phases. ⁷¹Ga NMR parameters are reported for the α- and β-Ga₂O₃ phases, and more tentatively for the δ-Ga₂O₃ phase. By simulating the octahedrally coordinated gallium NMR line of β-Ga₂O₃ using Gaussian distributions in χ_Q, the extent of disorder in the Ga₂O₃ crystallites has been quantified. The ball-milled samples contain much more inherent disorder than the sol-gel samples in the nano-phase, which was observed from simulations of the ⁷¹Ga MAS NMR spectra. The silica pinning phase produced highly crystalline and densely aggregated nanocrystalline Ga₂O₃, as well as the smallest nanocrystal sizes. Authors' address: Mark E. Smith, Department of Physics, University of Warwick, Coventry CV4 7AL, UK     

Influence of carbon additive on the properties of spherical Li<Subscript>4</Subscript>Ti<Subscript>5</Subscript>O<Subscript>12</Subscript> and LiFePO<Subscript>4</Subscript> materials for lithium-ion batteries

Preparing spherical particles with carbon additive is considered as one effective way to improve both high rate performance and tap density of Li₄Ti₅O₁₂ and LiFePO₄ materials. Spherical Li₄Ti₅O₁₂/C and LiFePO₄/C composites are prepared by spray-drying–solid-state reaction method and controlled crystallization–carbothermal reduction method, respectively. The X-ray diffraction characterization, scanning electron microscope, Brunauer–Emmett–Teller, alternating current impedance analyzing, tap density testing, and electrochemical property measurements are investigated. After hybridizing carbon with a proper quantity, the crystal grain size of active materials is remarkably decreased and the electrochemical properties are obviously improved. The Li₄Ti₅O₁₂/C and LiFePO₄/C composites prepared in this work are spherical. The tap density and the specific surface area are as high as 1.71 g cm⁻³ and 8.26 m² g⁻¹ for spherical Li₄Ti₅O₁₂/C, which are 1.35 g cm⁻³ and 18.86 m² g⁻¹ for spherical LiFePO₄/C powders. Between 1.0 and 3.0 V versus Li, the reversible specific capacity of the Li₄Ti₅O₁₂/C is more than 150 mAh g⁻¹ at 1.0-C rate. Between 2.5 and 4.2 V versus Li, the reversible capacity of the LiFePO₄/C is close to 140 mAh g⁻¹ at 1.0-C rate.     

Spectroscopic Properties and Energy Transfer Analysis of Tm<Superscript>3+</Superscript>-Doped BaF<Subscript>2</Subscript>-Ga<Subscript>2</Subscript>O<Subscript>3</Subscript>-GeO<Subscript>2</Subscript>-La<Subscript>2</Subscript>O<Subscript>3</Subscript> Glass

This paper reports on the spectroscopic properties and energy transfer analysis of Tm³⁺-doped BaF₂-Ga₂O₃-GeO₂-La₂O₃ glasses with different Tm₂O₃ doping concentrations (0.2, 0.5, 2.0, 2.5, 3.0, 3.5, 3.5, 4.0 wt%). Mid-IR fluorescence intensities in the range of 1,300 nm−2,200 nm have been measured when excited under an 808 nm LD for all the samples with the same pump power. Energy level structure and Judd-Ofelt parameters have been calculated based on the absorption spectra of Tm³⁺, cross-relaxation rates and multi-phonon relaxation rates have been estimated with different Tm₂O₃ doping concentrations. The maximum fluorescence intensity at around 1.8 μm has been obtained in Tm₂O₃-3 wt% sample and the maximum value of calculated stimulated emission cross-section of Tm³⁺ in this sample is about 0.48 × 10⁻²⁰ cm² at 1,793 nm, and there is not any crystallization peak in the DSC curve of this sample, which indicate the potential utility of Tm³⁺-doped BaF₂-Ga₂O₃-GeO₂- La₂O₃ glass for 2.0-μm optical fiber laser.     

Thermo-optic coefficients of monoclinic KLu(WO<Subscript>4</Subscript>)<Subscript>2</Subscript>

The three thermo-optic coefficients of the biaxial laser host KLu(WO₄)₂ are measured at 633 nm by a deflection method. Their values at 300 K amount to ∂ n _g /∂ T=−7.4×10⁻⁶ K⁻¹; ∂ n _m /∂ T=−1.6×10⁻⁶ K⁻¹ and ∂ n _p /∂ T=−10.8×10⁻⁶ K⁻¹. Nearly athermal propagation directions are found for polarizations along the N _m and N _p dielectric axes.     

Dielectric relaxation and ionic conductivity studies of Ag<Subscript>2</Subscript>ZnP<Subscript>2</Subscript>O<Subscript>7</Subscript>

The complex impedance of the Ag₂ZnP₂O₇ compound has been investigated in the temperature range 419–557 K and in the frequency range 200 Hz–5 MHz. The Z′ and Z′ versus frequency plots are well fitted to an equivalent circuit model. Dielectric data were analyzed using complex electrical modulus M* for the sample at various temperatures. The modulus plot can be characterized by full width at half-height or in terms of a non-exponential decay function f( \textt ) = exp( - \textt/t )^b \phi \left( {\text{t}} \right) = \exp {\left( { - {\text{t}}/\tau } \right)^\beta } . The frequency dependence of the conductivity is interpreted in terms of Jonscher’s law: s( w) = s_\textdc + \textAwⁿ \sigma \left( \omega \right) = {\sigma_{\text{dc}}} + {\text{A}}{\omega^n} . The conductivity σ _dc follows the Arrhenius relation. The near value of activation energies obtained from the analysis of M″, conductivity data, and equivalent circuit confirms that the transport is through ion hopping mechanism dominated by the motion of the Ag⁺ ions in the structure of the investigated material.     

Magnetic properties of LiNi<Subscript>0.5</Subscript>Mn<Subscript>0.47</Subscript>Al<Subscript>0.03</Subscript>O<Subscript>2</Subscript> as positive electrode for Li-ion batteries

The layered LiNi_0.5Mn_0.47Al_0.03O₂ was synthesized by wet chemical method and characterized by X-ray diffraction and analysis of magnetic measurements. The powders adopted the α-NaFeO₂ structure. This substitution of Al for Mn promotes the formation of Li(Ni_0.47²⁺Ni_0.03³⁺Mn_0.47⁴⁺Al_0.03³⁺)O₂ structures and induces an increase in the average oxidation state of Ni, thereby leading to the shrinkage of the lattice unit cell. The concentration of antisite defects in which Ni²⁺ occupies the (3a) Li lattice sites in the Wyckoff notation has been estimated from the ferromagnetic Ni²⁺(3a)–Mn⁴⁺(3b) pairing observed below 140 K. The substitution of 3% Al for Mn reduces the amount of antisite defects from 7% to 6.4–6.5%. The analysis of the magnetic properties in the paramagnetic phase in the framework of the Curie–Weiss law agrees well with the combination of Ni²⁺ (S = 1), Ni³⁺ (S = 1/2) and Mn⁴⁺ (S = 3/2) spin-only values. Delithiation has been made by the use of K₂S₂O₈. According to this process, known to be softer than the electrochemical one, the nickel ions in the (3b) sites are converted into Ni⁴⁺ in the high spin configuration, while Ni²⁺(3a)–Mn⁴⁺(3b) ferromagnetic pairs remain, as the Li⁺(3b) ions linked to the Ni²⁺(3a) ions in the antisite defects are not removed. The results show that the antisite defect is surrounded by Mn⁴⁺ ions, implying the nonuniform distribution of the cations in agreement with previous NMR and neutron experiments.     

Critical behavior of the heat capacity of the manganite La<Subscript>0.87</Subscript>K<Subscript>0.13</Subscript>MnO<Subscript>3</Subscript>

The heat capacity of the manganite La_0.87K_0.13MnO₃ has been measured in the temperature range 80–350 K. The nature of the ferromagnetic phase transition and the critical properties of heat capacity near the Curie temperature have been studied. The regularities of variations in the universal critical parameters near the phase transition point have been established. The calculated critical exponent and amplitudes of the heat capacity with allowance for corrections on the scaling (α = −0.13 and A ⁺/A ⁻ = 1.178) correspond to the critical behavior of the 3D Heizenberg model.     

Impedance analysis of Bi<Subscript>3.25</Subscript>La<Subscript>0.75</Subscript>Ti<Subscript>3</Subscript>O<Subscript>12</Subscript> ferroelectric ceramic

AC impedance spectroscopy technique has been used to study electrical properties of Bi_3.25La_0.75Ti₃O₁₂ (BLT) ceramic. Complex impedance plots were fitted with three depressed semicircles, which are attributed to crystalline layer, plate boundary and grain boundary and all three were found to comprise of universal capacitance nature [C = C0w ⁿ⁻¹]. Grain boundary resistance and capacitance evaluated from complex impedance plots have larger values than that of plate boundary and crystalline layer. The activation energies (E _a) for DC-conductance in grain boundary, plate boundary and crystalline layer are 0.68 eV, 0.89 eV and 0.89 eV, respectively. Relaxation activation energies calculated from impedance plots showed similar values, 0.81 eV and 0.80 eV for crystalline layer and plate boundary, respectively. These activation energy values are found to be consistent with the E _a value of oxygen vacancies in perovskite materials. A mechanism is offered to explain the generation of oxygen vacancies in BLT ceramic and its role in temperature dependence of DC-conductance study.      

Large optical nonlinearity in CaCu<Subscript>3</Subscript>Ti<Subscript>4</Subscript>O<Subscript>12</Subscript> thin films

CaCu₃Ti₄O₁₂ (CCTO) thin films were successfully prepared on LaAlO₃ substrates by pulsed laser deposition technique. We measured the nonlinear optical susceptibility of the thin films using Z-scan method at a wavelength of 532 nm with pulse durations of 25 ps and 7 ns. The large values of the third-order nonlinear optical susceptibility, χ ⁽³⁾, of the CCTO film were obtained to be 2.79×10⁻⁸ esu and 3.30×10⁻⁶ esu in picosecond and nanosecond time regimes, respectively, which are among the best results of some representative nonlinear optical materials. The origin of optical nonlinearity of CCTO films was discussed. The results indicate that the CCTO films on LaAlO₃ substrates are promising candidate materials for applications in nonlinear optical devices.     

Silver Nanoparticle-Enhanced Chemiluminescence Method for Determining Naproxen Based on Europium(III)-Sensitized Ce(IV)-Na<Subscript>2</Subscript>S<Subscript>2</Subscript>O<Subscript>4</Subscript> Reaction

A simple and sensitive chemiluminescence (CL) method coupled with flow-injection technique is proposed to determine naproxen (NAP). The method is based upon the enhancement of the weak CL signal arising from the reaction of Ce(IV) and Na₂S₂O₄ with Eu³⁺ to form the Eu³⁺-Ce(IV)-Na₂S₂O₄ system. The CL intensity was significantly increased by the introduction of NAP into this system in the presence of silver nanoparticles (Ag NPs). Examination of the recorded UV–vis spectra and fluorescence spectra indicated that the energy of the intermediate SO₂*, which originated from the redox reaction of Ce(IV) and Na₂S₂O₄, was transferred to Eu³⁺ via NAP and that the process was accelerated by Ag NPs due to their catalytic activity. Under the optimum conditions, the CL intensity was increased with increasing NAP concentration and the correlation was linear (r = 0.9992) over the NAP concentration range of 1–420 ng mL⁻¹. The limit of detection (LOD) was 0.11 ng mL⁻¹ with a relative standard deviation (RSD) of 1.15% for 5 replicate determinations of 200 ng mL⁻¹ NAP. The method was successfully applied to determine NAP in pharmaceutical and biological samples.     

Phase transition and electrical investigation in lithium copper pyrophosphate compound Li<Subscript>2</Subscript>CuP<Subscript>2</Subscript>O<Subscript>7</Subscript> using impedance spectroscopy

Lithium pyrophosphate compound Li₂CuP₂O₇ has been synthesized through solid state reaction method. FTIR and XRD results, realized at room temperature, indicate respectively the dominant feature of pyrophosphate anion (P₂O₇)^4? and a pure monoclinic phase with I2/a space group. Electrical and dielectric properties have been studied using impedance spectroscopy complex over a wide temperature (576–710 K) and frequency (209 Hz–1 MHz) range. From the direct and alternative conductivities (DC and AC), electrical conduction is found to be thermally activated process. The frequency-dependent AC conductivity obeys Jonscher’s universal power law σ_AC~Aω^s. The differential scanning calorimetry spectrum discloses phase transition at 622 K.     

Pulsed laser deposition of BaGa<Subscript>2</Subscript>O<Subscript>4</Subscript>

This paper reports the first results obtained on monobarium gallate thin films grown on silicon and platinum coated substrates by pulsed laser deposition. The influence of oxygen background pressure and substrate (or post-annealing) temperature on the film properties was studied. The films were characterized by XRD, RHEED, AFM, photoelectron and electrical impedance spectroscopy. The structure analysis showed that the films crystallized into a hexagonal phase, most probably into (metastable) α-BaGa₂O₄. Depending on deposition conditions, films with different (from nearly epitaxial to polycrystalline) textures were obtained.     

Fragmentation of sputtered Si<Subscript><Emphasis Type="Italic">n</Emphasis></Subscript>O<Stack><Subscript><Emphasis Type="Italic">m</Emphasis></Subscript><Superscript>+</Superscript></Stack> clusters: Release kinetic and dissociation energies

The spectra of kinetic energies of positive Si _n O _m ⁺ cluster ions (n = 2–5, m = 2–7) have been measured using a double focusing ion microanalyzer with reverse geometry at instants 10⁻⁵ to 10⁻⁴ s after emission. The dissociation energies have been determined within the evaporative ensemble model and the theory of unimolecular decay reactions. The results obtained are compared with the binding energies of neutral Si _n O _m clusters.