基于逐次滤波Radon-Ambiguity变换的多线性调频信号时频检测

Radon-Ambiguity变换是一种检测低信噪比下线性调频信号的有力工具。但在多信号环境下,强线性调频信号分量的Radon-Ambiguity变换对弱线性调频信号分量的Radon-Ambiguity变换有较强的抑制作用。同时Radon-Ambiguity变换对具有相同调频斜率和不同初始频率的线性调频信号分量不能实现识别与区分。提出了一种基于逐次滤波Radon-Ambiguity变换的时频表示方法可以有效地检测出多种情况下的多个线性调频信号。仿真试验证明了此方法可以有效地去除噪声、多信号之间交叉项的影响,在低信噪比下也十分有效。     

基于短时分数阶傅里叶变换域滤波的多项式相位信号时频检测

针对低信噪比下多个多项式相位信号提出了一种基于短时分数阶滤波的时频检测方法。分数阶傅里叶变换作为一种线性变换,能够实现线性调频信号检测与分离。而多项式相位信号在短时间内可以由线性调频信号提供良好的近似,故可以采用短时分数阶傅里叶变换实现多线性调频分量的检测与分离。对每个短时信号的时频分析进行叠加组合,即得到多个多项式相位信号的时频分析检测。计算机模拟仿真证明了此方法的有效性。     

简明分数阶傅里叶变换及其对线性调频信号的检测和参数估计

针对低信噪比下线性调频信号的检测问题,提出了一种简明分数阶傅里叶变换方法。该变换借助chirp相乘和傅里叶变换对时频平面上的频率轴进行旋转,以获取信号在各个角度下频率轴上的频谱分布。对时频分布呈直线状的线性调频信号,简明分数阶傅里叶变换能在特定角度上将信号能量聚集成尖锐的强能量峰,从而提高信噪比,实现对线性调频信号的可靠检测和参数估计。数值仿真和实验验证结果表明,简明分数阶傅里叶变换可对较低信噪比的线性调频信号实现有效检测,并由变换域峰值的位置对信号参数进行准确估计。相比于传统的分数阶傅里叶变换方法,简明分数阶傅里叶变换的复杂度更低,离散计算效率更高,在对噪声掩盖下的线性调频信号进行检测和参数估计时能更好地满足实时处理的要求。     

简明分数阶傅里叶变换及其对线性调频信号的检测和参数估计

针对低信噪比下线性调频信号的检测问题,提出了一种简明分数阶傅里叶变换方法。该变换借助chirp相乘和傅里叶变换对时频平面上的频率轴进行旋转,以获取信号在各个角度下频率轴上的频谱分布。对时频分布呈直线状的线性调频信号,简明分数阶傅里叶变换能在特定角度上将信号能量聚集成尖锐的强能量峰,从而提高信噪比,实现对线性调频信号的可靠检测和参数估计。数值仿真和实验验证结果表明,简明分数阶傅里叶变换可对较低信噪比的线性调频信号实现有效检测,并由变换域峰值的位置对信号参数进行准确估计。相比于传统的分数阶傅里叶变换方法,简明分数阶傅里叶变换的复杂度更低,离散计算效率更高,在对噪声掩盖下的线性调频信号进行检测和参数估计时能更好地满足实时处理的要求。      

线性调频信号激励过阻尼双稳系统的随机共振现象研究

线性调频信号是工程中常见的一种信号, 由于其为非周期信号, 无法以频域信噪比作为衡量其是否产生随机共振的测量手段, 故鲜有文献研究以线性调频信号为激励信号的随机共振现象. 本文利用线性调频信号在最优分数阶Fourier变换域上的能量聚集性, 首次提出以最优分数阶Fourier变换域上定义的信噪比作为测量手段, 研究了线性调频信号叠加高斯白噪声激励过阻尼双稳系统的随机共振现象, 且发现了以线性调频信号为激励信号时产生的新现象, 即随着信号频率的增大, 随机共振将逐渐减弱, 并给出了合理的解释.仿真的结果与理论分析一致, 验证了本文所提出方法的有效性. 关键词： 线性调频信号 分数阶Fourier变换 随机共振     

PCM/FM遥测信号软件解调算法研究

针对目前航天测控中PCM/FM遥测系统使用的调频非相干解调技术存在解调门限较高的问题,研究一种基于最大似然思想的多符号检测(Multi-Symbol Detection, MSD)解调方法。介绍多符号检测原理,并针对以往同步方法的不足,研究一种将码元判决过程与同步相结合的变步长同步方法。仿真和测试结果表明,基于MSD解调PCM/FM信号是一种非常有效的方法。对下一代遥测信号解调系统的研制具有重要的应用价值。     

可产生"任意"超声检测信号的方法

提出了一种实现超声检测中期望检测信号的方法.该方法采用自适应滤波解卷积计算获得期望检测信号所需的激励信号,通过将该激励信号施加在检测系统上获得期望的检测信号,达到检测信号的可控可调.实验获得了时宽带宽积达33的线性调频检测信号和信噪比达18.1 dB的单周期检测信号,达到期望要求.仿真分析表明,所实现的检测信号信噪比将随检测系统带宽的增加而增加.该方法可用于产生与检测目标相匹配的检测信号,提高超声检测性能.     

基于多项式调频Fourier变换的信号分量提取方法

为了从含有噪声的混合信号中有效提取各个信号分量, 提出一种基于多项式调频Fourier变换的分量提取方法. 通过研究Fourier变换和分数阶Fourier变换的信号能量积累方式及变换基函数的时频表示, 提出利用时频平面上的多项式调频曲线族代替Fourier变换和分数阶Fourier 变换的调频直线族, 将变换的适用范围扩展到非线性调频信号. 采用粒子群智能优化算法搜索调频曲线族的最优多项式参数, 使混合信号中的某一分量在多项式调频Fourier域上能量谱集中. 最后对能量谱集中的分量进行窄带滤波, 并利用多项式调频逆Fourier变换重构信号分量. 仿真实验结果表明, 该方法不仅能够提取混合信号中的线性调频分量, 还能够实现非线性调频分量的能量谱集中、信号分离和时频特征提取.     

水下连续波有源探测的回波检测算法

研究线性调频连续波在水下探测中的信号模型、回波信号的检测和目标参数估计方法,通过分析回波信号与发射信号间的差拍信号,提出差拍-分数阶傅里叶变换结构的处理算法。为了减少分数阶傅里叶变换二维搜索时的计算量,首先使用Radon-Ambiguity变换估计差拍信号的调频斜率,再做相应阶次的分数阶傅里叶变换。数值仿真说明提出的算法能够有效消除线性调频连续波的距离-速度耦合现象,准确估计目标参数。通过湖上试验比较线性调频脉冲信号和线性调频连续波的处理增益,提出的算法处理的连续波比匹配滤波方法处理的脉冲信号处理增益大13 dB。研究结果表明该算法在连续波水下探测中可行有效,不仅能够准确估计目标参数,还具有良好的检测性能。      

基于分数阶傅里叶变换的水下目标宽带回波精确提取

线性调频信号可能将成为水下目标强度宽带测试的一种主要信号形式。本文在分析水中目标回声构成特点的基础上,探讨了一种滤除界面反射精确提取目标回波的方法。利用线性调频信号在一定分数阶傅立叶域呈现高度聚集的特性,将线性调频信号作为收发合置换能器的发射信号,在适当的分数阶傅立叶域中,目标回波和界面反射波如果表现为两个可分离的谱峰,就可以用窄带滤波的方法去除界面反射。本文给出了算法仿真及水池试验结果,即使对于和线性调频回波相距很近的界面反射,仍然可以有效去除,精确提取出目标回波。     

Localization of targets in CW-LFM radars with combined modulating signal

An improved algorithm of detecting multiple targets by cw radars with linear frequency modulation (LFM) is presented. A combined modulating signal consisting of successive LFM and pure Doppler periods has been used. Processing of pure Doppler periods does not require large computational resources and the obtained results are more accurate. This construction of algorithm allows reducing the probability of false alarm in the localization regime and simplifying the processing in the detection regime.     

Acceleration target detection based on LFM radar

In radar systems, the echo signal caused by an accelerated target can be similarly considered as linear frequency modulation (LFM) signal. In high signal-to-noise ratio (SNR), discrete polynomial-phase transform (DPT) algorithm can be used to detect the echo signal, as it has low computation complexity and high real-time performance. However, in low SNR, the DPT algorithm has a large mean square error of the rate of frequency modulation and a low detection probability. In order to detect LFM signal in low SNR, this paper proposes a detection method, segment discrete polynomial-phase transform (SDPT), which means, at first, dividing the whole echo pulses into several segments with same duration in time domain, and then, using coherent accumulation method of DFT to segments, at last, processing this signal with DPT in intra-segment. In the case of a large number of segments, the SDPT can improve the output SNR. In addition, in a certain SNR, to the target signal with big sampling interval, large acceleration and less segments, this paper proposes an algorithm to detect the LFM signal generated from the combination of an improved DPT (IDPT) and fractional Fourier transform (FRFT). The output SNR of this algorithm is connected with the length of time delay. In the simulation, when the length of the time delay is 0.2 N, the output SNR is 2.5 dB more than that which results from directly using DPT. Finally, the detection performance and algorithm complexity of the proposed algorithm were analyzed, and the simulated and measured data verify the effectiveness of the algorithm.     

Prediction of the performance of an algorithm for the detection of small targets in infrared images

Detection of small targets in infrared (IR) images is important in IR image processing. For the prediction of performance of a detection algorithm, it is necessary to calculate the probability of detection and probability of false alarm. A method is developed to calculate the probabilities in this paper. The detection is divided into two parts: the first part, which is called pre-detection, is to find out candidates for targets in a single frame of an image; and the second part is to localize the target in multiple frames of the image. Under some assumptions, the pre-detection probability, the false detection probability of single frame, detection probability and false alarm probability are derived. The algorithm for the detection of small target in IR image, which is used for the derivation of the probabilities, is contrast threshold detection based on background prediction, and a pipeline filter is used for multiframe image processing. The results show the relationship of the probabilities to the contrast of target to background, SNR, and contrast threshold.     

变分模态分量降噪后重构的水声弱信号检测

针对能量检测法在低信噪比下对非合作水声探测信号的检测性能显著下降的问题,提出了一种组合变分模态分解和小波变换降噪重构的信号检测方法。以信号分解出的各个本征模态函数的近似熵与互相关系数比值作为分量分类参数,将所得分量分为信号分量、含噪信号分量与噪声分量,然后利用第二代小波变换对含噪信号分量降噪后与信号分量组成重构信号,最后对重构信号进行检测。数值仿真结果表明该方法可以在无先验信息的情况下对CW和LFM信号自适应降噪,信噪比0 dB以下时CW信号重构后信噪比提升约12 dB,宽带LFM信号信噪比提升约8～9 dB,有效提升了低虚警概率下信号的检测概率。湖试结果表明,虚警概率为0.1时检测概率可提升至0.9以上,验证了该方法的有效性。     

一种线性调频扩频水声通信的新同步方法

针对高速运动过程中的水声通信,提出一种新型稳健的同步方法。该方法充分利用线性调频（LFM）信号的自相关特性及LFM扩频水声通信解调原理。湖试结果表明该方法简单有效,能够消除同步误差累积。利用湖试数据进行的仿真结果表明:该方法在常速及变速运动情况下均有效;在水下24m/s高速运动、时变多途干扰、带内接收信噪比低于0dB时,数据率可达为100bit/s,误码率保持在10^-4左右。     

Multi component LFM signal detection and parameter estimation based on EEMD–FRFT

This paper studied multi component LFM signal detection and parameter estimation under the noise circumstance of various signal-to-noise ratios. Based on the analysis of fractional Fourier transform detection and parameter estimation on simple component LFM signal, this paper proposed the method of multi component LFM signal detection and parameter estimation based on EEMD–FRFT (Ensemble Empirical Mode Decomposition–Fractional Fourier transform), and this method was that with the EEMD algorithm, from the frequency domain decompose the analyzable signal to narrow-bandwidth components, whose center frequency changed from high to low, then accurately estimate the parameter and detect the signal of each component out of the pseudo-component with FrFT. This method solved the problem of mode aliasing of signal decomposition; meanwhile, the problem of detecting the multi component LFM signal would be simplified as the problem of one-dimensional search in small scope, which could reduce the amount of operation and improved the detection accuracy. A simulation computation for multi component LFM signal of various SNR (signal-to-noise ratios) was made and the result showed that the error of parameter estimation was less than 5% in the case of SNR not less than −10 dB.     

Transition from phase synchronization to complete synchronization in mutually coupled nonidentical Nd:YAG lasers

Using mutually coupled nonidentical continuous-wave Nd:YAG lasers, we experimentally confirmed the recently proposed transition route from phase synchronization to complete synchronization. As evidence of this transition we obtained the probability distribution of the intermittent synchronization time near the threshold of the complete synchronization transition.     

一种面向中继协作频谱感知系统的自适应全局最优化算法

该文研究了冗余中继, 次用户及中继用户数目, 检测门限, 信道传输错误率等因素对中继协作频谱感知系统性能的影响, 并提出一种新的自适应全局最优化算法.该算法基于获得最大无干扰功率的自适应中继选择方法, 确定备选认知中继集合;单个次用户以信道传输错误率最小为准则, 从备选认知中继集合中自适应选择最佳中继, 使总体检测率最大;在给定目标检测率的条件下, 以系统吞吐量最大为准则, 给出了自适应全局最优化算法.仿真实验结果表明新算法信道传输精度高, 信道吞吐量大, 节约带宽资源.     

A generalized power-law detection algorithm for humpback whale vocalizations

Conventional detection of humpback vocalizations is often based on frequency summation of band-limited spectrograms under the assumption that energy (square of the Fourier amplitude) is the appropriate metric. Power-law detectors allow for a higher power of the Fourier amplitude, appropriate when the signal occupies a limited but unknown subset of these frequencies. Shipping noise is non-stationary and colored and problematic for many marine mammal detection algorithms. Modifications to the standard power-law form are introduced to minimize the effects of this noise. These same modifications also allow for a fixed detection threshold, applicable to broadly varying ocean acoustic environments. The detection algorithm is general enough to detect all types of humpback vocalizations. Tests presented in this paper show this algorithm matches human detection performance with an acceptably small probability of false alarms (P(FA) < 6%) for even the noisiest environments. The detector outperforms energy detection techniques, providing a probability of detection P(D) = 95% for P(FA) < 5% for three acoustic deployments, compared to P(FA) > 40% for two energy-based techniques. The generalized power-law detector also can be used for basic parameter estimation and can be adapted for other types of transient sounds.     

基于回形窗的弱小多目标图像分割方法

提出一种红外弱小多目标图像分割方法,用一个回形窗口和对比度阈值分割图像.对天空背景下低信噪比的红外弱小多目标图像序列能够有效的分割,抑制噪音干扰.将该方法与传统的图像分割方法做了比较,并对用不同阈值,不同窗口分割时的分割结果进行了分析.实验表明,该算法在执行效率和检测概率上能够取得满意的结果.