Energy transfer from benzoic acid to lanthanide ions in benzoic acid-functionalized lanthanide-doped CaF2 nanoparticles

The preparation of benzoic acid-functionalized CaF₂:Ln³⁺ (Ln = Eu or Tb) nanoparticles and their sensitized luminescence are described in this report. First, to achieve sufficient proof for energy transfer from benzoic acid (BA) to lanthanide ions doped in nanoparticles, we employ Eu³⁺ as the microscopic probe and investigate the luminescent spectra of benzoic acid-functionalized CaF₂:Eu³⁺ (BA-CaF₂:Eu³⁺) nanoparticles. Next, to further reveal the difference between sensitized luminescence and common luminescence for Eu³⁺ doped in CaF₂ nanoparticles, we study the emission spectra of BA-CaF₂:Eu³⁺ nanoparticles excited at 286 nm and 397 nm, respectively. Finally, we analyze and compare the luminescent spectra of BA-CaF₂:Tb³⁺ and CaF₂:Ce³⁺, Tb³⁺ nanoparticles in detail. Our results indicate that both Eu³⁺ and Tb³⁺ doped in CaF₂ nanoparticles can be efficiently sensitized through benzoic acid.     

Luminescence behavior of Tb ions in transparent glass and glass-ceramics containing CaF2 nanocrystals

Transparent glass-ceramics have been fabricated by heat treatment with 1.0 mol% Tb₂O₃-doped 45SiO₂-20Al₂O₃-10CaO-25CaF₂ aluminosilicate glass. The precipitated crystalline phase in the glass-ceramics is CaF₂ nanocrystals with a size of 15-27 nm and dispersed in the amorphous phase. Both photo- and radioluminescence measurements show that the increase of Tb³⁺ 545 nm line intensity by a factor of 4 and 3.5 is obtained in glass-ceramics with respect to the as-made glass, respectively.     

Photoluminescence properties and effects of dopant concentration in Bi2ZnB2O7:Tb phosphor

A novel green phosphor, Tb³⁺ doped Bi₂ZnB₂O₇ was synthesized by conventional solid state reaction method. The phase of synthesized materials was determined using the XRD, DTA/TG and FTIR. The photoluminescence characteristics were investigated using spectrofluorometer at room temperature. Bi₂ZnB₂O₇:Tb³⁺ phosphors excited by 270 nm and 485 nm wavelengths. The emission spectra were composed of three bands, in which the dominated emission of green luminescence Bi₂ZnB₂O₇:Tb³⁺ attributed to the transition ⁵D₄ → ⁷F₅ is centered at 546 nm. The dependence of the emission intensity on the Tb³⁺ concentration for the Bi_2−xTb_xZnB₂O₇ (0.01 ≤ x ≤ 0.15) was studied and observed that the optimum concentration of Tb³⁺ in phosphor was 13 mol% for the highest emission intensity at 546 nm.     

Enhanced luminescent properties of Y3Al5O12:Tb,Ce phosphor prepared by spray pyrolysis

Yttrium aluminum garnet (YAG) particles doped with Tb³⁺ or double doped with Tb³⁺ and Ce³⁺ were prepared by spray pyrolysis and characterized by photo- and cathode-luminescence. It was tried to incorporate a broad band of Ce³⁺ activator into the line peaks of Tb³⁺ in YAG host without the reduction of emission intensity. Ce-codoped YAG:Tb particles showed a broad band emission due to the d-f transition of Ce³⁺ and a reduction in the intensity of emission peaks due to ⁵D₃-⁷F_j (j=3, 4, 5, 6) transition of Tb³⁺ when they were excited by the ultraviolet light of 270 nm. These results supported that an effective energy transfer occurs from Tb³⁺ to Ce³⁺ in YAG host. Codoping Ce³⁺ ions greatly intensified the excitation peak at 270 nm for the emission at 540 nm of Tb³⁺, which means that more lattice defects, involving in the energy absorption and transfer to Tb³⁺, are formed by the Ce³⁺ codoping. The finding gives a promising approach for enhancing the luminescence efficiency.     

Ionic liquid-assisted hydrothermal synthesis of dendrite-like NaY(MoO4)2:Tb phosphor

Micro-sized NaY(MoO₄)₂:Tb³⁺ phosphors with dendritic morphology was synthesized by a ionic liquid-assisted hydrothermal process. X-ray diffraction (XRD) indicated that the as-prepared product is pure tetragonal phase of NaY(MoO₄)₂. Field emission scanning electron microscopy (FE-SEM) images showed that the as-prepared NaY(MoO₄)₂:Tb³⁺ phosphors have dendritic morphology. The photoluminescent (PL) spectra displayed that the as-prepared NaY(MoO₄)₂:Tb³⁺ phosphors show a stronger green emission with main emission wavelength 545 nm corresponding to the ⁵D₄→⁷F₅ transition of Tb³⁺ ion, and the optimal Tb³⁺ doping concentration for obtaining maximum emission intensity was confirmed to be 10 mol%. Based on Van Uitert's and Dexter's models the electric dipole–dipole (D–D) interaction was confirmed to be responsible for the concentration quenching of ⁵D₄ fluorescence of Tb³⁺ in the NaY(MoO₄)₂:Tb³⁺ phosphors. The intrinsic radiative transition lifetime of ⁵D₄ level is found to be 0.703 ms.     

Double emitting phosphor NaSr4(BO3)3:Ce, Tb for near-UV light-emitting diodes

Blue and green double emitting phosphor, Ce³⁺ and Tb³⁺ co-doped NaSr₄(BO₃)₃, was synthesized in a weak reducing atmosphere by a conventional high temperature solid-state reaction technique. For comparison, Ce³⁺ or Tb³⁺ singly doped NaSr₄(BO₃)₃ was also prepared. The emission and excitation spectra of all samples have been investigated. NaSr₄(BO₃)₃:Tb³⁺ excitation includes a strong absorption at about 240 nm and some weak sharp lines in near-ultraviolet (n-UV) spectral region. The excitation of Ce³⁺ and Tb³⁺ co-doped NaSr₄(BO₃)₃ shows a strong broad band absorption in the n-UV region from the contribution of Ce³⁺, which makes it suitable for excitation by a n-UV LED chip. The emission of NaSr₄(BO₃)₃:Ce³⁺,Tb³⁺ consists of a blue emission band from Ce³⁺ and a green emission from Tb³⁺ under the excitation of n-UV light. Energy transfer between Ce³⁺ and Tb³⁺ is also discussed, and the relative intensity of blue emission and green emission could be tuned by adjusting the concentration of Ce³⁺ and Tb³⁺. The phosphor NaSr₄(BO₃)₃:Ce³⁺,Tb³⁺ could be considered as a double emission phosphor for n-UV excited white light-emitting diodes.     

Sensitized luminescence through nanoscopic effects of ZnO encapsulated in SiO2:Tb sol gel derived phosphor

Terbium (1 mol%) doped ZnO-SiO₂ binary system was prepared by a sol-gel process. Nanoscopic effects of ZnO on the photoluminescence (PL) and the cathodoluminescence (CL) properties were studied. Defects emission from ZnO nanoparticles was measured at 560 nm and the line emission from Tb³⁺ ions in SiO₂:Tb³⁺ and ZnO-SiO₂:Tb³⁺ with a major peak at 542 nm was measured. The PL excitation wavelength for 542 nm Tb³⁺ emission was measured at ∼320 nm in both SiO₂:Tb³⁺ and ZnO-SiO₂:Tb³⁺. The CL data showed quenched luminescence of the ZnO nanoparticles at 560 nm from a composite of ZnO-SiO₂:Tb³⁺ and a subsequent increase in 542 nm emission from the Tb³⁺ ions. This suggests that energy was transferred from the ZnO nanoparticles to enhance the green emission of the Tb³⁺ ions. The PL and CL properties of ZnO-SiO₂:Tb³⁺ binary system and possible mechanism for energy transfer from the ZnO nanoparticles to Tb³⁺ ions are discussed.     

Luminescent properties of SrAl2B2O7: Ce, Tb

By using metal nitrates as starting materials, SrAl₂B₂O₇: Tb³⁺ and SrAl₂B₂O₇: Ce³⁺, Tb³⁺ powder phosphors were prepared by sol-gel method. X-ray diffraction (XRD), photoluminescence excitation and emission, as well as kinetic decays were employed to characterize the resulting samples. The results show that energy transfers from Ce³⁺ to Tb³⁺ ions. The emission intensity of Tb³⁺ ions in SrAl₂B₂O₇ could be greatly intensified when Ce³⁺ ions are doped into SrAl₂B₂O₇: Tb³⁺. The decay times of SrAl₂B₂O₇: Tb³⁺ were prolonged when Ce³⁺ ions were doped. The doping of Ce³⁺ ions not only improved the luminescent intensity, but also made the materials gets stable luminescent properties.     

Luminescence properties of Ce and Tb co-activated ZnAl2O4 phosphor

In this study, a solution combustion method was used to prepare green emitting Ce³⁺–Tb³⁺ co-activated ZnAl₂O₄ phosphor. The samples were annealed at 700 °C in air or hydrogen atmosphere to improve their crystallinity and optical properties. X-ray diffraction study confirmed that both as-prepared and post-preparation annealed samples crystallized in the well known cubic spinel structure of ZnAl₂O₄. An agglomeration of irregular platelet-like particles whose surfaces were encrusted with smaller spheroidal particles was confirmed by scanning electron microscopy (SEM). The fluorescence data collected from the annealed samples with different concentrations of Ce³⁺ and Tb³⁺ show the enhanced green emission at 543 nm associated with ⁵D₄→⁷F₅ transitions of Tb³⁺. The enhancement was attributed to energy transfer from Ce³⁺ to Tb³⁺. Possible mechanism of energy transfer via a down conversion process is discussed. Furthermore, cathodoluminescence (CL) intensity degradation of this phosphor was also investigated and the degradation data suggest that the material was chemically stable and the CL intensity was also stable after 10 h of irradiation by a beam of high energy electrons.     

Enhanced luminescence and degradation of SiO2:Ce,Tb powder phosphors prepared by a sol-gel process

Enhanced green photoluminescence and cathodoluminescence (CL) from Tb³⁺ ions due to co-doping with Ce³⁺ ions were observed from SiO₂:Ce,Tb powder phosphors prepared by a sol-gel technique. Blue emission from the Ce³⁺ ions was completely suppressed by Tb co-doping, presumably due to energy transfer from Ce³⁺ to Tb³⁺. In addition, the green CL intensity from SiO₂:Ce,Tb degraded by ∼50% when the powders were irradiated for 10 h with a 2 keV, 54 mA/cm² beam of electrons in an ultra-high vacuum chamber containing either 1×10⁻⁸ or 1×10⁻⁷ Torr O₂. Desorption of oxygen from the surface was observed during the decrease of CL intensity. The mechanisms for energy transfer from Ce³⁺ ions to Tb³⁺ ions to enhance the green luminescence, and mechanisms for desorption of oxygen from the phosphor surface that would result in decreased CL intensity are discussed.     

Synthesis and optical properties of 10 mol% Ce, 5 mol% Tb co-doped KGdF4 and GdF3 submicro/nanocrystals

By controlling the pH values of prepared solutions, the 10 mol% Ce³⁺, 5 mol% Tb³⁺ co-doped KGdF₄ (synthesized with pH = 3) and the 10 mol% Ce³⁺, 5 mol% Tb³⁺ co-doped GdF₃ (synthesized with pH = 1) submicro/nanocrystals have been synthesized based on a citric acid assisted hydrothermal method. For comparison, the samples synthesized by co-precipitation method (without hydrothermal treatment) with pH = 3 and 1 were also collected. The X-ray diffraction data illustrate that the hydrothermal treated KGdF₄ sample crystallizes in the cubic phase and the GdF₃ sample crystallizes in the orthorhombic phase. However, the samples synthesized by co-precipitation method with pH = 3 and 1 are both cubic phase KGdF₄. The field emission scanning electron microscopy images suggest that the hydrothermal treated KGdF₄ submicro/nanocrystals present spherical morphology and the GdF₃ submicrocrystals are rhombic-shaped. And the photoluminescence excitation and emission spectra as well as the luminescent dynamic curves demonstrate the difference in optical properties of the two hydrothermal treated samples.     

Thermoluminescence characteristics of rare-earth-doped LiCaBO3 phosphor

LiCaBO₃ was synthesized by high-temperature solid-state reaction. The influence of different rare earth dopants, i.e. Dy³⁺, Tb³⁺, Tm³⁺ and Ce³⁺, on thermoluminescence (TL) of LiCaBO₃ phosphor was discussed. We studied the TL properties and some dosimetric characteristics of Ce³⁺-activated LiCaBO₃ phosphor in detail. The effect of the concentration of Ce³⁺ on TL was investigated, the result of which showed that the optimum Ce³⁺ concentration was 1 mol%. The TL kinetic parameters of LiCaBO₃:0.01Ce³⁺ were studied by computer glow curve deconvolution (CGCD) method. The three-dimensional (3D) TL emission spectra were also studied, peaking at 431 and 474 nm due to the characteristic transition of Ce³⁺. We also studied the linearity, annealing condition, reproducibility, fading and different heating rate of the LiCaBO₃:0.01Ce³⁺ phosphor.     

Low temperature quenching and high efficiency Tm, La or Tb co-doped CaSc2O4:Ce phosphors for light-emitting diodes

Low temperature quenching and high efficiency CaSc₂O₄:Ce³⁺ (CSO:Ce³⁺) phosphors co-doped with Tm³⁺, La³⁺ and Tb³⁺ ions were prepared by a solid state method and the phase-forming, morphology, luminescence and application properties of these phosphors were investigated. The results showed that co-doping of Tm³⁺, La³⁺ and Tb³⁺ ions can improve the luminescence properties and decrease temperature quenching of CSO:Ce³⁺ phosphor remarkably. High efficiency green-light-emitting diodes were fabricated with the prepared phosphors and InGaN blue-emitting (∼460 nm) chips. The good performances of the green-light-emitting LEDs made from co-doped CSO:Ce³⁺ phosphors confirm the luminescence enhancement and indicate that Tm³⁺, La³⁺ and Tb³⁺ co-doped CSO:Ce³⁺ phosphors are suitable candidates for the fabrication of high efficiency white LEDs.     

KBaPO4:Ln (Ln=Eu, Tb, Sm) phosphors for UV excitable white light-emitting diodes

This letter reports the novel three emission bands based on phosphate host matrix, KBaPO₄ doped with Eu²⁺, Tb³⁺, and Sm³⁺ for white light-emitting diodes (LEDs). The phosphors were synthesized by solid-state reaction and thermal stability was elucidated by measuring photoluminescence at higher temperatures. Eu²⁺-doped KBaPO₄ phosphor emits blue luminescence with a peak wavelength at 420 nm under maximum near-ultraviolet excitation of 360 nm. Tb³⁺-doped KBaPO₄ phosphor emits green luminescence with a peak wavelength at 540 nm under maximum near-ultraviolet excitation of 370 nm. Sm³⁺-doped KBaPO₄ phosphor emits orange-red luminescence with a peak wavelength at 594 nm under maximum near-ultraviolet excitation of 400 nm. The thermal stabilities of KBaPO₄:Ln (Ln=Eu²⁺, Tb³⁺, Sm³⁺), in comparison to commercially available YAG:Ce³⁺ phosphor were found to be higher in a wide temperature range of 25-300 °C.     

Luminescent properties of RE-activated CaAl2B2O7 (RE=Tb, Ce) in VUV-visible region

RE³⁺-activated α- and β-CaAl₂B₂O₇ (RE=Tb, Ce) were synthesized with the method of high-temperature solid-state reaction. Their VUV excitation and VUV-excited emission spectra are measured and discussed in the present article. The charge transfer band of Tb³⁺ and Ce³⁺ is respectively calculated to be at 151±2 and 159±3 nm. All the samples show an activator-independent excitation peak at about 175 nm and an emission peak at 350-360 nm ascribed to the host absorption and emission band, respectively.     

Eu/Tb ions co-doped white light luminescence Y2O3 phosphors

Y₂O₃:Eu³⁺, Tb³⁺ phosphors with white emission are prepared with different doping concentration of Eu³⁺ and Tb³⁺ ions and synthesizing temperatures from 750 to 950 °C by the co-precipitation method. The resulted phosphors were characterized by X-ray diffraction (XRD) and photoluminescence (PL) spectroscopy. The results of XRD indicate that the crystallinity of the synthesized samples increases with enhancing the firing temperature. The photoluminescence spectra indicate the Eu³⁺ and Tb³⁺ co-doped Y₂O₃ phosphors show five main emission peaks: three at 590, 611 and 629 nm originate from Eu³⁺ and two at 481 and 541 nm originate from Tb³⁺, under excitation of 250-320 nm irradition. The white light luminescence color could be changed by varying the excitation wavelength. Different concentrations of Eu³⁺ and Tb³⁺ ions were induced into the Y₂O₃ lattice and the energy transfer from Tb³⁺→Eu³⁺ ions in these phosphors was found. The Commission International de l’Eclairage (CIE) chromaticity shows that the Y₂O₃:Eu³⁺, Tb³⁺ phosphors can obtain an intense white emission.     

The luminescence of CaYBO4:RE (REEu, Gd, Tb, Ce) in VUV-visible region

Phosphors CaYBO₄:RE³⁺ (RE=Eu, Gd, Tb, Ce) were synthesized with the method of solid-state reaction at high temperature, and their vacuum ultraviolet (VUV)-visible luminescent properties in VUV-visible region were studied at 20 K. In CaYBO₄, it is confirmed that there are two types of lattice sites that can be substituted by rare-earth ions. The host excitation and emission peaks of undoped CaYBO₄ are very weak, which locate at about 175 and 350-360 nm, respectively. The existence of Gd³⁺ can efficiently enhance the utilization of host absorption energy and result in a strong emission line at 314 nm. In CaYBO₄, Eu³⁺ has typical red emission with the strongest peak at 610 nm; Tb³⁺ shows characteristic green emission, of which the maximum emission peak is located at 542 nm. The charge transfer band of CaYBO₄:Eu³⁺ was observed at 228 nm; the co-doping of Gd³⁺ and Eu³⁺ can obviously sensitize the red emission of Eu³⁺. The fluorescent spectra of CaYBO₄:Ce³⁺ is very weak due to photoionization; the co-addition of Ce³⁺-Tb³⁺ can obviously quench the luminescence of Tb³⁺.     

Luminescence enhancement by energy transfer from Ce ions in Ba1.6Ca0.4P2O7:Ce:Tb phosphor

The optical properties of Ba_1.6Ca_0.4P₂O₇ doped with Ce³⁺ and Tb³⁺ are investigated. Under excitation at 280 nm the emission spectrum of Ba_1.6Ca_0.4P₂O₇:Ce³⁺ consists of a peak at 370 nm and a shoulder at the longer wavelength side. The emission spectra of Ba_1.6Ca_0.4P₂O₇:Tb³⁺ shows the well-known emission lines due to ⁵D₄-⁷F_J transitions of Tb³⁺. The green emissions of Tb³⁺ ions are enhanced upon UV excitation through energy transfer from Ce³⁺ to Tb³⁺ ions. The efficiency of such an energy transfer is estimated based on spectroscopic data. The dependence of photoluminescence (PL) intensities of Ce³⁺ and Tb³⁺ emissions on Ce³⁺ or Tb³⁺ concentrations in the systems (Ba_1.6Ca_0.4P₂O₇:0.04Ce³⁺,xTb³⁺ and Ba_1.6Ca_0.4P₂O₇:xCe³⁺,0.04Tb³⁺) and the temperature dependence of PL emission spectra of Ba_1.6Ca_0.4P₂O₇:0.06Ce³⁺,0.04Tb³⁺ is also investigated.     

Synthesis and luminescence properties of Eu, Ce and Tb-activated Sr3La2(BO3)4 under UV excitation

The spectroscopic properties in UV-excitable range for the phosphors of Sr₃La₂(BO₃)₄:RE³⁺ (RE³⁺=Eu³⁺, Ce³⁺, Tb³⁺) were investigated. The phosphors were synthesized by conventional solid-state reactions. The photoluminescence (PL) spectra and commission international de I'Eclairage (CIE) coordinates of Sr₃La₂(BO₃)₄:RE³⁺ were investigated. The f-d transitions of Eu³⁺, Ce³⁺ and Tb³⁺ in the host lattices are assumed and corroborated. The PL and PL excitation (PLE) spectra indicate that the main emission wavelength of Sr₃La₂(BO₃)₄:Eu³⁺ is 611 nm, and Sr₃La₂(BO₃)₄:Ce³⁺ shows dominating emission peak at 425 nm, while Sr₃La₂(BO₃)₄:Tb³⁺ displays green emission at 487, 542, 582 and 620 nm. These phosphors were prepared by simple solid-state reaction at 1000 °C. There are lower reactive temperature and more convenient than commercial phosphors. The Sr₃La₂(BO₃)₄:Tb³⁺ applied to cold cathode fluorescent lamp was found to emit green light and have a major peak wavelength at around 542 nm. These phosphors may provide a new kind of luminescent materials under ultraviolet excitation.     

Photoluminescence spectra of thenardite Na2SO4 activated with rare-earth ions, Ce, Sm, Tb, Dy and Tm

Five Na₂SO₄:RE³⁺ phosphors activated with rare-earth (RE) ions (RE³⁺=Ce³⁺, Sm³⁺, Tb³⁺, Dy³⁺ and Tm³⁺) were synthesized by heating natural thenardite Na₂SO₄ from Ai-Ding Salt Lake, Xinjiang, China with small amounts of rare-earth fluorides, CeF₃, SmF₃, TbF₃, DyF₃ and TmF₃, at 920 °C in air. The photoluminescence (PL) and optical excitation spectra of the obtained phosphors were measured at 300 and 10 K. In the PL spectrum of Na₂SO₄:Ce³⁺ at 300 K, two overlapping bands with peaks at 335 and 356 nm due to Ce³⁺ were first observed. Narrow bands observed in PL and excitation spectra of Na₂SO₄:RE³⁺ (RE³⁺=Sm³⁺, Tb³⁺, Dy³⁺ and Tm³⁺) phosphors were well identified with the electronic transitions within the 4fⁿ (n=5, 8, 9 and 12) configurations of RE³⁺. The existence of excitation bands with high luminescence efficiency at wavelengths shorter than 230 nm is characteristic of Na₂SO₄:RE³⁺ (RE³⁺=Sm³⁺, Tb³⁺, Dy³⁺ and Tm³⁺) phosphors. The obtained results suggest that these phosphors are unfavorable as the phosphor for usual fluorescence tubes, i.e., mercury discharge tubes, but may be favorable as the phosphor for UV-LED fluorescent tubes and as cathodoluminescence, X-ray luminescence and thermoluminescence phosphors.