基于光子晶体自准直环形谐振腔的全光均分束器

通过等频图分析并结合时域有限差分法模拟,在一个与偏振态无关的自准直光子晶体环形谐振腔中,研究发现当环形谐振腔内的光传输距离改变时,横电波(TE)和横磁波(TM)两种偏振态的光在通过环形谐振腔之后的输出将会随之变化并呈现出不同的周期性.通过选择适合的传输距离,实现了TE,TM自准直的情况下同时分束50%的结果,构成了一种基于光子晶体自准直环形谐振腔的全光均分束器.全光均分束器扩大了分束器的运用范围,也会在高密度集成光路中发挥重要的作用. 关键词： 光子晶体 环形谐振腔 自准直 分束器     

光子晶体自准直光束偏振分束器

结合能带图和等频图分析,基于光子晶体自准直效应和光子带隙,设计了一种紧凑、高效的偏振分束器.时域有限差分法(FDTD)模拟表明,该设计可以在一个较大的频率范围f=0.268—0.278(c/a) 内实现TE模和TM模的高效(85%)、大角度(90°)分离.在光通讯波长λ=1.55 μm,该设计尺寸仅为9 μm×9 μm.这些特性使其在光通讯领域中具有重要的应用前景. 关键词： 光子晶体 偏振分束器 自准直     

二维光子晶体分束器和偏转器

针对二维光子晶体在光束调整和光束偏转中的应用,采用平面波展开法、二维有限时域差分法和完全匹配层吸收边界条件,从理论上研究了二维方形光子晶体结构中TM模式的自准直现象.通过分析光子晶体的能带结构和等频图,基于二维光子晶体的自准直效应和光子带隙,对光波在二维光子晶体中的传播特性进行了讨论.数值计算表明,通过在合适的方向引入不同的线缺陷,可以实现自准直光束的1×2和1×3分束以及光束偏转.最后讨论了透射光束和偏转光束的能量随线缺陷半径的变化关系.所设计的器件极大地扩展了光子晶体在高密度光学集成电路中的应用.     

波状膜层全角度偏振分束特性的分析

从能带结构和等频面两方面完整阐述了利用光子晶体实现全角度偏振分束的条件，分析等频面目的在于确保波矢的切向分量保持连续，采用时域有限差分(FDTD)方法模拟了高斯光束在波状膜层中的传播过程，通过对比TE模与TM模在0°—89°不同入射角情况下的振幅透射系数，理论上验证了波状膜层的全角度偏振分束效应. 关键词： 光子晶体 偏振分束 等频面     

基于光子晶体自准直和带隙效应的马赫-曾德尔干涉仪设计

结合能带图和等频图分析,基于光子晶体自准直和光子带隙效应,设计了一种紧凑、高效的全光子晶体马赫-曾德尔(MZ)干涉仪.相应的光分束器和反射镜均由缺陷结构的光子晶体实现.讨论了干涉仪的输出机理,并与时域有限差分法(FDTD)模拟结果进行了比较.结果分析表明可以把MZ干涉仪作为一种气体、液体微型探测器.可在集成光学中起到重要的作用. 关键词： 光子晶体 自准直 MZ干涉仪     

光控液晶光子晶体微腔全光开关

设计了一种缺陷模迁移光子晶体微腔全光开关. 两条二维三角晶格空气孔光子晶体波导由一个光子晶体微腔连接, 在微腔的点缺陷中填充掺有少量偶氮聚合物的苯乙炔类液晶. 通过调节控制光的偏振态, 使偶氮聚合物发生顺-反异构化反应, 带动液晶分子重新取向, 从而改变光子晶体微腔的谐振波长, 进而实现光的通过与截止. 运用时域有限差分法和平面波展开法分析 了二维光控液晶光子晶体微腔全光开关的光学特性. 数值计算结果表明: 对于1.55 μ通信波段通过外界偏振光控制所填充的向列相液晶 的折射率可以实现对光波的导通与截止. 分析结果显示, 此开关具有阈值低, 消光比较大, 体积小等优点. 关键词： 二维光子晶体微腔 波导 时域有限差分(FDTD) 液晶     

可用于拓宽光波单向传输带宽的光子晶体异质结构界面

基于光波单向传输的全光二极管在集成光通信、全光网络和光信息处理中有重要应用.基于方向带隙失配设计的光子晶体异质结构可实现光波单向传输,但正向透射率较低,带宽较窄.基于对光子晶体异质界面倾斜角度的研究,根据界面全反射条件,利用可集成材料硅和二氧化硅设计了一种空气孔型二维光子晶体异质结构.异质结构界面两侧的光子晶体对1550 nm波长附近的TE模光波在Γ-X方向均呈导带,避免了方向带隙失配.研究发现当异质界面满足全反射条件时,由于光子晶体的自准直效应,较宽波段的正向光波得以高效传播,而反向光波在界面由于全反射而被禁止传播.光子晶体异质结构界面的全反射效应打破了方向带隙对光波单向传输的限制,使得反向光波在光子晶体中为导带时同样可实现近零透射率,从而拓宽了光波单向传输的波长范围.基于全反射界面的光子晶体异质结构经过优化后,其正向透射率达0.64,透射对比度为0.97,单向传输带宽可达553 nm.     

多功能磁光子晶体太赫兹可调偏振控制器件

通过对磁场控制下的二维磁光子晶体太赫兹波偏振传输特性的研究,利用铁氧体磁光材料的磁导率随外磁场改变而变化的特点,设计了具有可控起偏、偏振分束和可调谐波片功能的光子晶体太赫兹偏振控制器件.利用平面波展开法和严格耦合波分析分别计算了光子晶体带隙位置和透过率随外磁场强度变化的关系,用时域有限差分法计算了场分布和相位.结果表明,该结构可以实现高偏振消光比的偏振起偏器和分束器,以及在1 THz附近-π-π相位范围的连续可调谐波片. 关键词： 太赫兹 光子晶体 铁氧体 偏振控制     

Archimedes 32,4,3,4结构光子晶体中与偏振无关的自准直分束器

通过等频图分析并结合时域有限差分法法模拟, 在Archimedes 3²,4,3,4结构排列的二维光子晶体中同一频率下同时实现了电磁波两种偏振态的自准直. 研究发现,在该结构光子晶体中引入缺陷,当线缺陷宽度改变时, TE和TM两种偏振态光束的分束效果将会随之变化.由此通过控制缺陷宽度,分别实现了两种偏振态光束的50% ∶50%分束以及90°大角度光折弯,分束和折弯的效率都较为理想,为未来设计基于光子晶体的新型光子学器件提供了一种新的思路.     

光子晶体多通道可调谐偏振滤波器的理论研究

通过对设计的一维掺杂光子晶体的数值计算和理论分析,得出了两个偏振态缺陷模透射峰的变化特征为:P-偏振波其缺陷模透射峰在入射角大于0.75(rad)范围内有多条明显的缺陷模透射峰带,而S-偏振波在入射角大于0.75 (rad) 范围内没有缺陷模透射峰;P-偏振波缺陷模在同一杂质光学厚度可以截到多个波长不同的透射峰.以此为基础设计出滤波通道波长可调范围大于60 nm 、滤波通道的半高宽可调范围在1~5 nm、滤波通道透射峰值大于0.98的一维光子晶体三通道可调谐偏振滤波器.     

Polarization-independent self-collimating bends and beam splitters in photonic crystals

Polarization independent bends and beam splitters for transverse electric (TE) and transverse magnetic (TM) polarizations have been demonstrated in two-dimensional (2D) photonic crystals (PhCs). In virtuel of equi-frequency contour analysis and finite-difference time-domain calculations, self-collimation behaviors for TE- and TM-polarizations are achieved at the same frequency. Simulation results show a 90-degree bend with 90% efficiency and beam splitters with about 96% total efficiency for both TE- and TMpolarizations, where the light is self-guided by the self-collimation effect. Such bends and beam splitters are expected to play important roles in optical devices where polarization insensitivity is needed.     

Experimental demonstration of self-collimation inside a three-dimensional photonic crystal

We present our experimental demonstration of self-collimation inside a three-dimensional (3D) simple cubic photonic crystal at microwave frequencies. The photonic crystal was designed with unique dispersion property and fabricated by a high precision computer-controlled machine. The self-collimation modes were excited by a grounded waveguide feeding and detected by a scanning monopole. Self-collimation of electromagnetic waves in the 3D photonic crystal was demonstrated by measuring the 3D field distribution, which was shown as a narrow collimated beam inside the 3D photonic crystal but a diverged beam in the absence of the photonic crystal.     

基于自准直效应的光子晶体异质结偏振分束器

基于光子晶体的自准直效应和禁带特性,提出了一种具有非正交异质结结构的光子晶体偏振分束器.无需引入缺陷或波导,可使光波在该结构中准直无发散地传输并实现分束功能,对制造工艺的要求大大降低.利用Rsoft软件,结合平面波展开法和二维时域有限差分法,对提出的偏振分束器进行了仿真研究.结果表明,该偏振分束器在一个较大的频率范围f=0.275—0.285(a/λ)内可实现横电(TE)和横磁(TM)模的大角度偏振分离,TE和TM模的透过率均在88%以上,偏振消光比分别大于26.57 dB和17.50 dB.该结构可应用到太赫兹波段的传输系统中,a=26μm,尺寸大小为572μm×546μm,在91—95μm波长范围内可实现TE和TM模的分离.利用该结构可设计用于光通信系统(n=3.48)的偏振分束器,a=426.25 nm,结构仅为9.38μm×8.95μm.本方案结构简单,易于集成,有望在集成光路的发展中发挥重要作用.     

Polarization Beam Splitter Based on Self-Collimation Effect in Two-Dimensional Photonics Crystal

A photonic crystal polarization beam splitter based on the self-collimation effect is proposed. By means of the plane wave expansion method and the finite-difference time-domain method, we analyse the splitting mechanism in two alternative ways： performing a band gap structure analysis and simulating the field distribution. The results indicate that two beams of different polarizations can be split with an extinction ratio of nearly 20 dB in a wavelength range of POnm. The splitter may have practical applications in integrated photonic circuits.     

Controlling the self-collimation characteristics of a near-infrared two-dimensional metallic photonic crystal

Self-collimation characteristics of the two-dimensional square-lattice photonic crystal(PC) consisting of metal rods immersed in silicon are studied by the finite-difference time-domain method.The Drude dispersion model is adopted to describe the metal rod,and the self-collimation behaviours of the near-infrared light through the PC are studied.The frequency region and the tolerance of incident angle for the self-collimation behaviour can be controlled by changing the shape of the metal rods.     

Polarization insensitive self-collimation waveguide in square lattice annular photonic crystals

The frequency bands for self-collimation at both TE and TM polarizations in square lattice annular photonic crystals are studied systematically by plane-wave expansion and finite difference time domain methods. By increasing the inner ring radius or reducing the outer ring radius, the self-collimation band will be moved to a lower frequency. Compared with the TM modes, TE ones have different frequency sensitivities to both the inner ring radius and outer ring radius tuning. Using these features, a polarization insensitive self-collimation waveguide in a high dielectric contrast system with bandwidth up to 102.9 nm is demonstrated as an example of the implementation of photonic integration circuits.     

Experimental demonstration of self-collimation beaming and splitting in photonic crystals at microwave frequencies

I studied experimentally beam self-collimation and splitting in two-dimensional microwave photonic crystals. Using a microwave photonic crystal fabricated from alumina rods, I present an experimental proof of principle for an earlier theoretical proposal [A.F. Matthews, S.K. Morrison, Yu.S. Kivshar, Opt. Commun. 279 (2007) 313] of a photonic crystal beam splitter based on the self-collimation effect.     

Mesoscopic self-collimation and slow light in all-positive index layered photonic crystals

We demonstrate a mesoscopic self-collimation effect in photonic crystal superlattices consisting of a periodic set of all-positive index 2D photonic crystal and homogeneous layers. We develop an electromagnetic theory showing that diffraction-free beams are observed when the curvature of the optical dispersion relation is properly compensated for. This approach allows us to combine slow-light regime together with self-collimation in photonic crystal superlattices presenting an extremely low filling ratio in air.     

A tunable power splitter based on modes coupling and self-collimation effect in two-dimensional photonic crystals

A tunable power splitter is proposed in a two-dimensional photonic crystal with a line defect composed of two rows rods, whose refractive index can be controlled artificially. This device is working at a self-collimation frequency. The finite difference time domain (FDTD) simulations show that the beam splitting ratio is a function of the refractive index of line defect. If the index varies from 3.0 to 3.5, the beam intensity of one output port decreases from 87.2% (normalized by the input beam) to 0 while the intensity of the other output port increases from 8.98% to 100% monotonically. The coupling between the self-collimation mode and the defect mode is used to explain the working mechanism.     

Conditions for self-collimation in three-dimensional photonic crystals

We introduce the theoretical criterion for achieving three-dimensional self-collimation of light in a photonic crystal. Based on this criterion, we numerically demonstrate a body-center-cubic structure that supports wide-angle self-collimation and is directly compatible with the recently developed holographic fabrication technique. We further show that both bends and beam splitters can be introduced into this structure by the use of interfaces.