化学气相沉积金刚石探测器测量软X射线能谱

金刚石具备高热导率、高电阻率、高击穿电场、大的禁带宽度、介电系数小、载流子迁移率高以及抗辐射能力强等特性,可作为已应用于惯性约束聚变(ICF)实验X射线测量的硅与X射线二极管的较好替代品.随着化学气相沉积(CVD)技术的发展,CVD金刚石受到人们越来越多的关注.文中利用拉曼谱仪和X射线衍射仪对1mm×1mm×2mm,1mm×1mm×3mm两种规格CVD金刚石完成品质检测后,完成了CVD金刚石X射线探测器的集成制作,并在8ps激光器和神光III原型装置上开展了探测器时间特性等性能研究.实验结果表明,整个探测器系统前沿响应时间可达60ps,半高全宽可达120ps,与X射线二极管探测系统时间特性一致.在神光Ⅲ原型装置实验中,没有观察到探测器对3ω0激光的响应,说明探测器具有好的抗干扰能力.其测得的温度曲线与软X射线能谱仪测量结果一致,实现了X射线能谱测量的初步应用.     

Surface modification of titanium membrane by chemical vapor deposition and its electrochemical self-cleaning

Membrane separation is applied widely in many fields, while concentration polarization and membrane fouling, limiting its promotion and application greatly, are the bottlenecks in membrane application. Among which, membrane fouling is irreversible, membrane must be periodically cleaned or even replaced to restore permeability. Membrane cleaning has become one of the key issues in membrane separation areas. Considering incomparable electrochemical advantages of boron-doped diamond (BDD) film electrode over conventional electrode, a new composite membrane Ti/BDD, made by depositing CVD (chemical vapor deposition) boron-doped diamond film on titanium(Ti) membrane to modify porous titanium surface, that can be cleaned electrochemically is proposed. Feasibility of its preparation and application is discussed in this paper. Results shows that based on the unique electrochemical properties of diamond, cleaning level of this composite Ti/BDD membrane is significantly increased, making membrane life and efficiency improved prominently.     

Evaluation of bacterial adhesion on Si-doped diamond-like carbon films

Diamond-like carbon (DLC) films as biomaterial for medical devices have been attracting great interest due to their excellent properties such as hardness, low friction and chemical inertness. It has been demonstrated that the properties of DLC films can be further improved by the addition of silicon into DLC films, such as thermal stability, compressive stress, etc. However no research work on anti-bacterial properties of silicon-doped diamond-like carbon films has been reported. In this paper the surface physical and chemical properties of Si-doped diamond-like carbon films with various Si contents on 316 stainless steel substrate prepared by a magnetron sputtering technique were investigated, including surface topography, surface chemistry, the sp³/sp² ratio, contact angle, surface free energy, etc. Bacterial adhesion to Si-doped DLC films was evaluated with Pseudomonas aeruginosa, Staphylococcus epidermidis and Staphylococcus aureus which frequently cause medical device-associated infections. The experimental results showed that bacterial adhesion decreased with increasing the silicon content in the films. All the Si-doped DLC films performed much better than stainless steel 316L on reducing bacterial attachment.     

μSR in diamond

It has recently become possible to take advantage of the interesting properties of diamond, as the synthesis of diamond has reached a point that material with impurities in the low the part per billion range and residual strain in the order of ten nano-radians has been realized. Hyperfine interactions have played a key role in the study of diamond and the emergence of novel applications. This relates to the characterization of defects and the development of engineered few spin systems. A particular aspect of the defect studies is the elusive hydrogen defect. In μSR studies, muonium is considered a light isotope of hydrogen with very similar chemical properties, but with very interestingly different dynamical properties, due to its much lighter mass. It offers a unique opportunity to study the behaviour of hydrogen in diamond at very low concentrations. The studies have revealed details of the elementary muonium atom as well as a molecule involving muonium in the diamond lattice. The dynamics of the muonium, which include quantum diffusion and ionization have also been studied. This contribution reviews μSR in diamond in the context of diamond as a modern material hosting advanced applications.     

A review of the interfacial properties of 2-D materials for energy storage and sensor applications

The discovery of two-dimensional (2D) materials like graphene inspired the researchers and scientists to develop new 2D materials. The 2D materials create extensive attention due to their novel electronic properties, large surface area, charging capacity, optical, biocompatible, unique physical and chemical properties. Many of these properties are an excellent requirement for an application of electrode for batteries and super-capacitors. The applications of 2D materials are not just confined to Opto and nano-electronics but a strong potential in gas, and biosensing technologies. The 2D materials are stackable through weak Van der Waals, therefore, used in alkali metal ion batteries as electrodes, this causes zero volume and area changes during the intercalation and deintercalation of alkali metal. Also, a large surface of 2D materials provides large storage capacity as compared to the bulk materials. The heterostructures based on 2D materials pay significant attention towards the optoelectronics, nanoelectronics and in alkali metal ion battery applications also. In this paper, we review the importance of heterostructure, stacking technique in interfacial synthesis, address their structural morphologies by the interface of 2D materials and its application for energy storage, gas, and biosensing applications. We will come up with an overview of interfacial characters and highlights about the advantages and individuality of 2D materials.     

N离子注入对金刚石膜场发射特性的影响

不同剂量的N离子被注入到化学气相沉积金刚石膜内，研究了表面结构及场发射特性的变化.Raman谱和x射线光电子能谱分析表明，N离子的注入破坏了金刚石膜表面原有的sp3结构，并在膜内形成大量的sp2 C—C 和sp2 C—N 键.样品的场发射测试显示N离子的注入显著提高了金刚石膜场发射特性，膜的场发射阈值电场从注入前的18 V/μm下降到注入后的4 V/μm.金刚石膜场发射特性的提高归因于N离子注入后膜内sp2 C键含量的增加和体内缺陷带的形成，这些变化能改变膜的表面功函数，提高Feimi能级，降低电子隧穿表面的能量势垒. 关键词： 场致电子发射 N离子注入 金刚石膜 热丝化学气相沉积     

Metal CVD for microelectronic applications: An examination of surface chemistry and kinetics

We review the surface chemistry and kinetics relevant to the chemical vapor deposition (CVD) of metals used for microelectronic applications. Our efforts focus on the surface chemistry of aluminum, tungsten, and copper CVD, which have received the most recent interest for metallization. We first briefly review a variety of topics concerning the applications and the chemistry and kinetics of metal CVD. We also give a brief overview of the application of surface science techniques to the study of CVD-related surface chemistry.     

基于人造金刚石晶体的拉曼激光器研究进展

受激拉曼散射是一种重要的非线性光学频率变换技术,在拓展激光波段方面有十分广泛的应用前景。因此,寻找具有优良光学性质的拉曼介质,提高拉曼激光器性能,具有重要的研究价值。相比于传统的固体拉曼晶体,人造金刚石晶体具有拉曼增益系数大、拉曼频移大、导热率高和透过性好等显著优点,基于人造金刚石晶体的拉曼激光器能够获得更高的输出功率和转换效率。本文简要介绍了化学气相沉积法(CVD)制备的金刚石晶体的光学性质和热学特性,总结了基于人造金刚石晶体的拉曼激光器在紫外波段、可见光波段及红外波段的研究现状,并对其发展进行了展望。     

Nanostructures produced by cluster beam lithography

2 clusters with about 1000 molecules per unit charge are accelerated to up to 120 keV kinetic energy for mask projective surface bombardment. Patterning is achieved via physical as well as chemical surface erosion. Very smooth eroded surfaces result for bulk natural diamond, silicon, and glass. Polycrystalline, strongly faceted CVD diamond films are effectively planarized. Submicron structures with various wall inclinations can be generated. Atomic force microscopy of individual impact structures reveals nanometer-sized hillocks instead of craters. The collective motion of the impacted surface material is considered crucial for the cluster impact-induced nanomodifications. Atomic ion beam lithography is considered for comparison. Received: 3 July 1998     

天然钻石与合成钻石的特异性光谱初步研究

通过紫外-可见-近红外(UV-Vis-NIR) 吸收光谱、傅里叶变换红外(FTIR)光谱及钻石观测仪( DiamondViewTM)对天然钻石、经辐照或热处理的天然钻石、高温高压(HTHP)合成钻石及化学气相沉积(CVD)合成钻石进行了较系统的谱图及微区生长结构的对比研究。结果表明：天然钻石、经辐照或高温退火处理后的天然钻石、高温高压(HTHP)合成钻石的UV-Vis-NIR吸收谱图在200～1 100 nm区间谱图的反射率变化明显。相比之下,CVD合成钻石的反射率的变化相对较小。基于钻石样品的红外光谱分析,在其图谱中的800～1 600 cm-1区间,合成钻石样品、特别是CVD合成钻石在上述区间无明显的特征吸收峰位。此外,DiamondViewTM检测表明：一般而言,经HTHP处理后的CVD合成钻石出现平行的位错线,并呈现淡蓝色荧光。部分天然钻石可见典型的八面体生长线或称为树的年轮状图像,且因样品经辐照与高温高压处理后其荧光图像的颜色发生改变。高温高压合成钻石呈现出块状几何生长图像。限于钻石样品类别的多样性及合成钻石工艺的复杂且不断更新特征,天然钻石与合成钻石 的UV-Vis-NIR或FTIR光谱特征存在一定的相似性,因此不具有典型天然钻石图谱特征的样品需进一步辅以DiamondViewTM、光致发光光谱等其他检测仪器予以综合分析。     

Semiconductor nanowires for photovoltaic and photoelectrochemical energy conversion

Semiconductor nanowires （NW） possess several beneficial properties for efficient conversion of solar energy into electricity and chemical energy. Due to their efficient absorption of light, short distances for minority carriers to travel, high surface-to-volume ratios, and the availability of scalable synthesis methods, they provide a pathway to address the low cost-to-power requirements for widescale adaptation of solar energy conversion technologies. Here we highlight recent progress in our group towards implementation of NW components as photovoltaic and photoelectrochemical energy conversion devices. An emphasis is placed on the unique properties of these one-dimensional （1D） structures, which enable the use of abundant, low-cost materials and improved energy conversion efficiency compared to bulk devices.     

Study of microwave plasma-assisted chemical vapor deposition of poly-and single-crystalline diamond films

We study conditions for microwave plasma-assisted chemical vapor deposition of high-quality single-crystal diamond films in a CVD reactor. These conditions are studied using the results of homoepitaxial growth of polycrystalline diamond films on diamond substrates and on the basis of numerical simulation of the microwave discharge in a CVD reactor. A high-quality single-crystal diamond layer is synthesized on a synthetic, type Ib diamond substrate. The properties of the obtained monolayer are studied by means of Raman and X-ray diffraction spectroscopy as well as optical and atomic-force microscopy.     

Novel two-dimensional transition metal chalcogenides created by epitaxial growth

Two-dimensional(2D) materials have been a very important field in condensed matter physics, materials science, chemistry, and electronics. In a variety of 2D materials, transition metal chalcogenides are of particular interest due to their unique structures and rich properties. In this review, we introduce a series of 2D transition metal chalcogenides prepared by epitaxial growth. We show that not only 2D transition metal dichalcogenides can be grown, but also the transition metal chalcogenides that do not have bulk counterparts, and even patterned transition metal chalcogenides can be fabricated. We discuss the formation mechanisms of the novel structures, their interesting properties, and potential applications of these 2D transition metal chalcogenides. Finally, we give a summary and some perspectives on future studies.     

Low temperature surface chemistry and nanostructures

The new scientific field of low temperature surface chemistry, which combines the low temperature chemistry (cryochemistry) and surface chemistry approaches, is reviewed in this paper. One of the most exciting achievements in this field of science is the development of methods to create highly ordered hybrid nanosized structures on different organic and inorganic surfaces and to encapsulate nanosized metal particles in organic and polymer matrices. We consider physical and chemical behaviour for the systems obtained by co-condensation of the components vapours on the surfaces cooled down to 4–10 and 70–100 K. In particular the size effect of both types, the number of atoms in the reactive species structure and the thickness of growing co-condensate film, on the chemical activity of the system is analysed in detail. The effect of the internal mechanical stresses on the growing interfacial co-condensate film formation and on the generation of fast (explosive) spontaneous reactions at low temperatures is discussed. The examples of unusual chemical interactions of metal atoms, clusters and nanosized particles, obtained in co-condensate films on the cooled surfaces under different conditions, are presented. The examples of highly ordered surface and volume hybrid nanostructures formation are analysed.     

CVD金刚石中的氮对等离子体刻蚀的影响

采用非对称磁镜场电子回旋共振等离子体分别对沉积过程中掺氮和未掺氮的化学气相沉积金刚石膜进行了刻蚀研究, 结果表明: 掺氮制备的金刚石膜的刻蚀主要集中在晶棱处, 经过4h刻蚀后其表面粗糙度由刻蚀前的4.761 μm下降至3.701 μm, 刻蚀对金刚石膜的表面粗糙度的影响较小; 而未掺氮制备的金刚石膜的刻蚀表现为晶面的均匀刻蚀, 晶粒坍塌,刻蚀4h后其表面粗糙度由刻蚀前的3.061 μm下降至1.083 μm. 刻蚀导致表面粗糙度显著降低. 上述差别的主要原因在于金刚石膜沉积过程中掺氮导致氮缺陷在金刚石晶棱处富集, 晶棱处电子发射加强, 引导离子向晶棱运动并产生刻蚀, 从而加剧晶棱的刻蚀. 而未掺氮金刚石膜,其缺陷相对较少且分布较均匀 ,刻蚀时整体呈现为 (111) 晶面被均匀刻蚀继而晶粒坍塌的现象. 关键词： 掺氮 金刚石膜 刻蚀 非对称磁镜场     

Noble Metal Clusters: Applications in Energy,Environment, and Biology

Sub‐nanometer‐sized metal clusters, having dimensions between metal atoms and nanoparticles, have attracted tremendous attention in the recent past due to their unique physical and chemical properties. As properties of such materials depend strongly on size, development of synthetic routes that allows precise tuning of the cluster cores with high monodispersity and purity is an area of intense research. Such materials are also interesting owing to their wide variety of applications. Novel sensing strategies based on these materials are emerging. Owing to their extremely small size, low toxicity, and biocompatibility, they are widely studied for biomedical applications. Primary focus of this review is to provide an account of the recent advances in their applications in areas such as environment, energy, and biology. With further experimental and theoretical advances aimed at understanding their novel properties and solving challenges in their synthesis, an almost unlimited field of applications can be foreseen.     

Surface science of diamond: Familiar and amazing

The crystal structure of diamond is identical with that of its more common semiconductor relatives silicon and germanium. Consequently, a number of surface properties in terms of reconstructions, surface states and surface band diagrams are similar as in the case of Si or Ge. But diamond also exhibits a number of unusual and potentially very useful surface properties. Particularly when the surface dangling bonds are saturated by monovalent hydrogen atoms (donor-like), surface states are removed from the gap, the electron affinity changes sign and becomes negative, and the material becomes susceptible to an unusual type of transfer doping where holes are injected by acceptors located at the surface instead of inside the host lattice. These surface acceptors can in the simplest case be adsorbed molecules conveniently chosen by their electron affinity, but they can also be solvated ions within atmospheric water layers or electrolytes in contact with the hydrogenated diamond surface. In this article the surface properties of diamond will be reviewed with special emphasis on this new kind of doping mechanism.     

Microstructuring of diamond bulk by IR femtosecond laser pulses

We report the fabrication of graphitic microstructures in the bulk of chemical vapor deposited (CVD) diamond using 120-fs laser pulses at 800-nm wavelength. The nature of the laser-modified region and generation of mechanical stresses in the surrounding diamond is studied with Raman spectroscopy. A spontaneous growth of the laser-modified region from the focal plane towards the laser has been visualized in the process of multipulse irradiation with different pulse energies. The formation of discrete or continuous graphitized structures is revealed depending on the varied local laser intensity. The physical processes governing the appearance of separate graphitic globules and continuous extension of the graphitized region are discussed. Controlling the laser irradiation conditions permits us to fabricate graphitic wires with typical length of 150 μm and diameter of 1.5 μm. The longer, 300-ps pulses, as applied to laser microstructuring of the CVD diamond bulk, are found to be inappropriate due to the stronger influence of structural defects on the damage threshold, the noticeable fluctuation of the structure diameter over the length and the pronounced cracking of the surrounding diamond. PACS 42.62.-b; 61.80.Ba     

Laser in micro and nanoprocessing of diamond materials

Basic processing operations will be presented. These include diamond polishing and shaping, production of conductive pathways, micro‐ and nanostructures on the diamond surface, such as diffractive optical elements. The possibility to laser produce conductive and hollow structures in the diamond bulk, including curved elements, will be demonstrated. Finally, the techniques of laser assisted diamond CVD, that allow production of smooth or selective‐area grown films will be presented     

Atmospheric‐Pressure Plasmas for Solar Cell Manufacturing

Innovative plasma technologies operating at atmospheric pressure are especially advantageous concerning continuous processing capability. They are characterized by low costs, easy integration in existing production lines, low processing temperatures and high throughput. These economic and technological benefits are especially interesting for the manufacturing of crystalline silicon solar cells. Potential applications include PECVD as well as plasma‐chemical etching. In this work two principles of a large area plasma activation are presented: a linearly extended DC arc discharge (LARGE) and a microwave plasma (CYRANNUS). The atmosphericpressure reactors are designed for the continuous air‐to‐air processing of flat or slightly curved substrates. Gas purge systems enable the control of the atmosphere in the deposition zone and prevent the leakage of toxic gases. Extensive fluid‐dynamic modeling is used for optimization of plasma sources and reactors. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)