二硫化钨/石墨烯异质结的界面相互作用及其肖特基调控的理论研究

采用第一性原理方法研究了二硫化钨/石墨烯异质结的界面结合作用以及电子性质,结果表明在二硫化钨/石墨烯异质结中,其界面相互作用是微弱的范德瓦耳斯力.能带计算结果显示异质结中二硫化钨和石墨烯各自的电子性质得到了保留,同时,由于石墨烯的结合作用,二硫化钨呈现出n型半导体.通过改变界面的层间距可以调控二硫化钼/石墨烯异质结的肖特基势垒类型,层间距增大,肖特基将从p型转变为n型接触.三维电荷密度差分图表明,负电荷聚集在二硫化钨附近,正电荷聚集在石墨烯附近,从而在界面处形成内建电场.肖特基势垒变化与界面电荷流动密切相关,平面平均电荷密度差分图显示,随着层间距逐渐增大,界面电荷转移越来越弱,且空间电荷聚集区位置向石墨烯层方向靠近,导致费米能级向上平移,证实了肖特基势垒随着层间距的增加由p型接触向n型转变.本文的研究结果将为二维范德瓦耳斯场效应管的设计与制作提供指导.     

Interfacial thermal resistance in multilayer graphene structures

The cross-plane thermal conductivities of multilayer graphene are investigated using nonequilibrium molecular dynamics simulation. It is found that the interfacial thermal resistance in multilayer graphene structures is strongly layer number dependent. It decreases with increasing layer number and reaches a limit as layer number is large enough. The interfacial thermal resistance for graphite and multilayer graphene has an anomalous relationship with temperature compared with that in superlattice structures. It increases with the temperatures above room temperature, which is attributed to phonon tunneling effects. Phonon tunneling probability is reduced due to the decreased phonon wavelength while temperature rises, which in turn causes the increased interfacial thermal resistance.     

Thermal transport in graphene

The recent advances in graphene isolation and synthesis methods have enabled potential applications of graphene in nanoelectronics and thermal management, and have offered a unique opportunity for investigation of phonon transport in two-dimensional materials. In this review, current understanding of phonon transport in graphene is discussed along with associated experimental and theoretical investigation techniques. Several theories and experiments have suggested that the absence of interlayer phonon scattering in suspended monolayer graphene can result in higher intrinsic basal plane thermal conductivity than that for graphite. However, accurate experimental thermal conductivity data of clean suspended graphene at different temperatures are still lacking. It is now known that contact of graphene with an amorphous solid or organic matrix can suppress phonon transport in graphene, although further efforts are needed to better quantify the relative roles of interface roughness scattering and phonon leakage across the interface and to examine the effects of other support materials. Moreover, opportunities remain to verify competing theories regarding mode specific scattering mechanisms and contributions to the total thermal conductivity of suspended and supported graphene, especially regarding the contribution from the flexural phonons. Several measurements have yielded consistent interface thermal conductance values between graphene and different dielectrics and metals. A challenge has remained in establishing a comprehensive theoretical model of coupled phonon and electron transport across the highly anisotropic and dissimilar interface.     

Geometry and temperature effects of the interfacial thermal conductance in copper- and nickel-graphene nanocomposites

Graphene has excellent mechanical, electrical and thermal properties. Recently, graphene-metal composites have been proposed as a means to combine the properties of metals with those of graphene, leading to mechanically, electrically and thermally functional materials. The understanding of metal-graphene nanocomposites is of critical importance in developing next-generation electrical, thermal and energy devices, but we currently lack a fundamental understanding of how their geometry and composition control their thermal properties. Here we report a series of atomistic simulations, aimed at assessing the geometry and temperature effects of the thermal interface conductance for copper- and nickel-graphene nanocomposites. We find that copper-graphene and nickel-graphene nanocomposites have similar thermal interface conductances, but that both cases show a strong performance dependence on the number of graphene layers between metal phases. Single-graphene-layer nanocomposites have the highest thermal interface conductance, approaching ~500 MW m(-2) K(-1). The thermal interface conductance reduces to half this value in metal-bilayer graphene nanocomposites, and for more than three layers of graphene the thermal interface conductances further reduces to ~100 MW m(-2) K(-1) and becomes independent with respect to the number of layers of graphene. This dependence is attributed to the relatively stronger bonding between the metal and graphene layer, and relatively weaker bonding between graphene layers. Our results suggest that designs combining metal with single graphene layers provide the best thermal properties.     

Thermal properties of two-dimensional materials

Two-dimensional(2D) materials, such as graphene, phosphorene, and transition metal dichalcogenides(e.g., Mo S2 and WS2), have attracted a great deal of attention recently due to their extraordinary structural, mechanical, and physical properties. In particular, 2D materials have shown great potential for thermal management and thermoelectric energy generation. In this article, we review the recent advances in the study of thermal properties of 2D materials. We first review some important aspects in thermal conductivity of graphene and discuss the possibility to enhance the ultra-high thermal conductivity of graphene. Next, we discuss thermal conductivity of Mo S2 and the new strategy for thermal management of Mo S2 device. Subsequently, we discuss the anisotropic thermal properties of phosphorene. Finally, we review the application of 2D materials in thermal devices, including thermal rectifier and thermal modulator.     

Two-dimensional phonon transport in graphene

Properties of phonons-quanta of the crystal lattice vibrations-in graphene have recently attracted significant attention from the physics and engineering communities. Acoustic phonons are the main heat carriers in graphene near room temperature, while optical phonons are used for counting the number of atomic planes in Raman experiments with few-layer graphene. It was shown both theoretically and experimentally that transport properties of phonons, i.e. energy dispersion and scattering rates, are substantially different in a quasi-two-dimensional system such as graphene compared to the basal planes in graphite or three-dimensional bulk crystals. The unique nature of two-dimensional phonon transport translates into unusual heat conduction in graphene and related materials. In this review, we outline different theoretical approaches developed for phonon transport in graphene, discuss contributions of the in-plane and cross-plane phonon modes, and provide comparison with available experimental thermal conductivity data. Particular attention is given to analysis of recent results for the phonon thermal conductivity of single-layer graphene and few-layer graphene, and the effects of the strain, defects, and isotopes on phonon transport in these systems.     

Effect of isotope doping on phonon thermal conductivity of silicene nanoribbons: A molecular dynamics study

Silicene, a silicon analogue of graphene, has attracted increasing research attention in recent years because of its unique electrical and thermal conductivities. In this study, phonon thermal conductivity and its isotopic doping effect in silicene nanoribbons(SNRs) are investigated by using molecular dynamics simulations. The calculated thermal conductivities are approximately 32 W/mK and 35 W/mK for armchair-edged SNRs and zigzag-edged SNRs, respectively, which show anisotropic behaviors. Isotope doping induces mass disorder in the lattice, which results in increased phonon scattering, thus reducing the thermal conductivity. The phonon thermal conductivity of isotopic doped SNR is dependent on the concentration and arrangement pattern of dopants. A maximum reduction of about 15% is obtained at 50% randomly isotopic doping with ~(30)Si. In addition, ordered doping(i.e., isotope superlattice) leads to a much larger reduction in thermal conductivity than random doping for the same doping concentration. Particularly, the periodicity of the doping superlattice structure has a significant influence on the thermal conductivity of SNR. Phonon spectrum analysis is also used to qualitatively explain the mechanism of thermal conductivity change induced by isotopic doping. This study highlights the importance of isotopic doping in tuning the thermal properties of silicene, thus guiding defect engineering of the thermal properties of two-dimensional silicon materials.     

Artificially controlled synthesis of graphene intramolecular heterojunctions for phonon engineering

Because phonons are the main carriers for graphene heat transfer, modifying the dynamic properties of the crystal lattice by isotopes modulates the phonon behavior and alters the thermal properties. Here we demonstrate an artificially controlled texture synthesis of ¹²C‐graphene/¹³C‐graphene heterostructures via chemical vapor deposition and an O₂ plasma etching. The electrical and thermal properties of the graphene across the heterojunction show that ¹²C‐graphene and ¹³C‐ graphene are electronically connected as resistors in series, while the thermal conductivity across the junction is dramatically reduced due to the suppressed phonon propagation, which causes the conductivity across the junction to be lower than that of graphene sheets with randomly mixed isotopes. These findings should help realize novel two‐dimensional graphene thermoelectric devices where phonon modulation controls the electrons and heat transport independently. (© 2014 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

超晶格和层状结构传热特性的连续模型及其在能源材料设计中的应用

层状材料和超晶格结构为提高热电材料和隔热涂层提供了新的设计思路, 并成为最近的研究热点. 应用连续波动方程和线性阻尼理论, 本文研究了此类材料中的声子输运特性. 给出了在整个相空间里的界面调制和声子局域化效应, 得出了超晶格材料热导率的上极限和下极限; 同时, 分析表明界面锐化加强了声子带隙, 使得部分模态的声子局域化加强. 最后, 通过对石墨烯/氮化硼超晶格(G/hBN)和硅/锗超晶格的分子模拟(Si/Ge), 验证了该理论模型. 该方法适用于所有的层状材料和超晶格结构, 对此类新能源材料的设计提供了普适的设计思路.     

Effect of electrical contact on performance of WSe2 field effect transistors

Two-dimensional (2D) transition metal dichalcogenides (TMDCs) such as tungsten diselenide (WSe₂) have spead many interesting physical properties, which may become ideal candidates to develop new generation electronic and optoelectronic devices. In order to reveal essential features of 2D TMDCs, it is necessary to fabricate high-quality devices with reliable electrical contact. We systematically analyze the effect of graphene and metal contacts on performance of multi-layered WSe₂ field effect transistors (FETs). The temperature-dependent transport characteristics of both devices are tested. Only graphene-contacted WSe₂ FETs are observed with the metal-insulator transition phenomenon which mainly attributes to the ultra-clean contact interface and lowered contact barrier. Further characterization on contact barrier demonstrates that graphene contact enables lower contact barrier with WSe₂ than metal contact, since the Fermi level of graphene can be modulated by the gate bias to match the Fermi level of the channel material. We also analyze the carrier mobility of both devices under different temperatures, revealing that graphene contact can reduce the charge scattering of the device caused by ionized impurities and phonon vibrations in low and room temperature regions, respectively. This work is expected to provide reference for fabricating 2D material devices with decent performances.     

Thermal properties of graphene and multilayer graphene: Applications in thermal interface materials

We review the thermal properties of graphene and multilayer graphene, and discuss graphene’s applications in thermal management of advanced electronics and optoelectronics. A special attention is paid to the use of the liquid-phase-exfoliated graphene and multilayer graphene as the fillers in the thermal interface materials. It has been demonstrated that addition of an optimized mixture of graphene and multilayer graphene to the composites with different matrix materials produces the record-high enhancement of the effective thermal conductivity at the small filler loading fraction (f≤10 vol%). The thermal conductivity enhancement due to the presence of graphene in the composites has been observed for a range of matrix materials used by industry. The hybrid composites where graphene is utilized together with metallic micro- and nanoparticles allow one to tune both the thermal and electrical conductivity of these materials. Theoretical considerations indicate that the graphene-based thermal interface materials can outperform those with carbon nanotubes, metal nanoparticles and other fillers owing to graphene’s geometry, mechanical flexibility and lower Kapitza resistance at the graphene–base material interface.     

接触角与液固界面热阻关系的分子动力学模拟

本文利用分子动力学方法模拟了液体在固体表面的 接触角及液固界面热阻, 并探讨了二者之间的关系. 通过分别改变液固结合强度和固体的原子性质来分析接触角和界面热阻的关系及变化趋势. 模拟结果显示增强液固间相互作用时, 接触角减小的同时界面热阻也随之单调减小; 而改变固体原子间结合强度和原子质量时, 接触角几乎保持不变, 但界面热阻显著改变. 固体原子间结合强度和原子质量影响界面热阻的原因是其改变了固体的振动频率分布, 导致液固原子间的振动耦合程度发生变化. 本文的结果表明界面热阻不仅与由接触角所表征的液固结合强度有关, 还与液固原子间的振动耦合程度有关. 接触角与界面热阻间不存在单值的对应关系, 不能单一地将接触角作为液固界面热阻的评价标准. 关键词： 液固界面 接触角 界面热阻 分子动力学模拟     

Thermal transport in lithium-ion battery: A micro perspective for thermal management

In recent years, lithium ion (Li-ion) batteries have served as significant power sources in portable electronic devices and electric vehicles because of their high energy density and rate capability. There are growing concerns towards the safety of Li-ion batteries, in which thermal conductivities of anodes, cathodes, electrolytes and separator play key roles for determining the thermal energy transport in Li-ion battery. In this review, we summarize the state-of-the-art studies on the thermal conductivities of commonly used anodes, cathodes, electrolytes and separator in Li-ion batteries, including both theoretical and experimental reports. First, the thermal conductivities of anodes and cathodes are discussed, and the effects of delithiation degree and temperature of materials are also discussed. Then, we review the thermal conductivities of commonly used electrolytes, especially on solid electrolytes. Finally, the basic concept of interfacial thermal conductance and simulation methods are presented, as well as the interfacial thermal conductance between separator and cathodes. This perspective review would provide atomic perspective knowledge to understand thermal transport in Li-ion battery, which will be beneficial to the thermal management and temperature control in electrochemical energy storage devices.     

First-principles analysis of phonon thermal transport properties of two-dimensional WS_2/WSe_2 heterostructures

The van der Waals(vdW)heterostructures of bilayer transition metal dichalcogenide obtained by vertically stacking have drawn increasing attention for their enormous potential applications in semiconductors and insulators.Here,by using the first-principles calculations and the phonon Boltzmann transport equation(BTE),we studied the phonon transport properties of WS2/WSe2 bilayer heterostructures(WS2/WSe2-BHs).The lattice thermal conductivity of the ideal WS2/WSe2-BHs crystals at room temperature(RT)was 62.98 W/mK,which was clearly lower than the average lattice thermal conductivity of WS2 and WSe2 single layers.Another interesting finding is that the optical branches below 4.73 THz and acoustic branches have powerful coupling,mainly dominating the lattice thermal conductivity.Further,we also noticed that the phonon mean free path(MFP)of the WS2/WSe2-BHs(233 nm)was remarkably attenuated by the free-standing monolayer WS2(526 nm)and WSe2(1720 nm),leading to a small significant size effect of the WS2/WSe2-BHs.Our results systematically demonstrate the low optical and acoustic phonon modes-dominated phonon thermal transport in heterostructures and give a few important guidelines for the synthesis of van der Waals heterostructures with excellent phonon transport properties.     

石墨烯过渡层对金属/SiC接触肖特基势垒调控的第一性原理研究

由于SiC禁带宽度大,在金属/SiC接触界面难以形成较低的势垒,制备良好的欧姆接触是目前SiC器件研制中的关键技术难题,因此,研究如何降低金属/SiC接触界面的肖特基势垒高度(SBH)非常重要.本文基于密度泛函理论的第一性原理赝势平面波方法,结合平均静电势和局域态密度计算方法,研究了石墨烯作为过渡层对不同金属(Ag,Ti,Cu,Pd,Ni,Pt)/SiC接触的SBH的影响.计算结果表明,单层石墨烯可使金属/SiC接触的SBH降低;当石墨烯为2层时,SBH进一步降低且Ni,Ti接触体系的SBH呈现负值,说明接触界面形成了良好的欧姆接触;当石墨烯层数继续增加,SBH不再有明显变化.通过分析接触界面的差分电荷密度以及局域态密度,SBH降低的机理可能主要是石墨烯C原子饱和了SiC表面的悬挂键并降低了金属诱生能隙态对界面的影响,并且接触界面的石墨烯及其与金属相互作用形成的混合相具有较低的功函数.此外,SiC/石墨烯界面形成的电偶极层也可能有助于势垒降低.     

石墨烯过渡层对金属/SiC接触肖特基势垒调控的第一性原理研究

由于SiC禁带宽度大,在金属/SiC接触界面难以形成较低的势垒,制备良好的欧姆接触是目前SiC器件研制中的关键技术难题,因此,研究如何降低金属/SiC接触界面的肖特基势垒高度(SBH)非常重要.本文基于密度泛函理论的第一性原理赝势平面波方法,结合平均静电势和局域态密度计算方法,研究了石墨烯作为过渡层对不同金属(Ag,Ti,Cu,Pd,Ni,Pt)/SiC接触的SBH的影响.计算结果表明,单层石墨烯可使金属/SiC接触的SBH降低;当石墨烯为2层时,SBH进一步降低且Ni,Ti接触体系的SBH呈现负值,说明接触界面形成了良好的欧姆接触;当石墨烯层数继续增加,SBH不再有明显变化.通过分析接触界面的差分电荷密度以及局域态密度,SBH降低的机理可能主要是石墨烯C原子饱和了SiC表面的悬挂键并降低了金属诱生能隙态对界面的影响,并且接触界面的石墨烯及其与金属相互作用形成的混合相具有较低的功函数.此外,SiC/石墨烯界面形成的电偶极层也可能有助于势垒降低.     

Investigation of the transport mechanism in graphene-induced metal-oxide-semiconductor capacitors (MOSCAP)

Graphene is the most promising contender for the future generation of electronic and photonic devices, based on its extraordinary properties. The effect of the metal interface with graphene, however, which completely alters its properties, is of great importance. The effects of the substrate supporting the graphene matrix, the graphene/metal contact resistance and the overall metal oxide semiconductor capacitors (MOSCAP) for possible CMOS circuitry have been thoroughly investigated in this research work. We have fabricated a structure with pertinent deposition techniques and performed a detailed electrical analysis to obtain the transport characteristics. Nickel (Ni) is chosen as the transition metal which makes the chemisorption bonding with graphene while qualifying as an interface. We present an analysis of the metal contacts, a study of the metal resistivity at various planes, a study of the graphene (carbon) atom's resistance at the atomistic scale, the graphene based MOSCAP leakages, the necessary charge accumulation at the metal–graphene interface and the charge inversion just beneath the oxide layer.     

The effect of macroscopic polarization on intrinsic and extrinsic thermal conductivities of AlN

The effect of macroscopic polarization on thermal conductivity of bulk wurtzite AlN has been theoretically investigated. Our results show that macroscopic polarization modifies the phonon group velocity, Debye frequency and Debye temperature of the AlN. Using revised phonon velocity and Debye temperature, various phonon scattering rates and combined scattering rate are calculated as functions of the phonon frequency at room temperature. The intrinsic and extrinsic thermal conductivities of AlN have been estimated using these modified parameters. The theoretical analysis shows that up to a certain temperature the polarization effect acts as negative effect and reduces the intrinsic and extrinsic thermal conductivities. However, after this temperature both thermal conductivities are significantly enhanced. High phonon velocity and Debye temperature are the reason of this enhancement which happens due to the polarization effect. The revised thermal conductivities at room temperature are found to be increased by more than 20% in AlN due to macroscopic polarization phenomenon. The method we have developed can be taken into account during the simulation of heat transport in optoelectronic nitride devices to minimize the self heating processes.     

Phonon scattering and thermal conductance properties in two coupled graphene nanoribbons modulated with bridge atoms

The phonon scattering and thermal conductance properties have been studied in two coupled graphene nanoribbons connected by different bridge atoms by using density functional theory in combination with non-equilibrium Green's function approach. The results show that a wide range of thermal conductance tuning can be realized by changing the chemical bond strength and atom mass of the bridge atoms. It is found that the chemical bond strength (bridge atom mass) plays the main role in phonon scattering at low (high) temperature. A simple equation is presented to describe the relationship among the thermal conductance, bridge atom, and temperature.     

石墨烯等离激元的光学性质及其应用前景

石墨烯等离激元由于其独特的电学可调性、本征低衰减以及局域光场高度增强等特性, 引起了广泛的关注并迅速成长为一门新的学科分支--石墨烯表面等离激元光子学. 本文介绍了石墨烯等离激元的一些基本性质, 包括色散关系、局域的等离激元和传导的等离激元以及石墨烯等离激元对其周边介电环境的敏感性等. 在此基础上, 进一步介绍了石墨烯等离激元在太赫兹到中红外频段的应用, 比如有源光调制器的一些功能器件和增强的红外光谱探测等.