基于调制方向提取载波散斑条纹中心线的方法

条纹中心线法是一种重要的电子散斑干涉条纹解调方法,其前提条件是获得高准确度的条纹中心线.本文在分析载波电子散斑干涉条纹自身特征的基础上,提出了一种基于载波条纹调制方向提取条纹中心线的方法.该方法首先通过同态滤波有效滤除高频乘性散斑噪音,提取出载波条纹;然后应用基于调制方向提取中心线算法确定载波条纹灰度极值点并做二值化处理;再采用基于中心线拟合或者基于条纹间距的边沿中心线补偿法,获得完整的条纹中心线图.实验结果表明:该方法简单、可靠,能快速、准确地提取出连续的中心线.     

基于调制方向提取载波散斑条纹中心线的方法

条纹中心线法是一种重要的电子散斑干涉条纹解调方法,其前提条件是获得高准确度的条纹中心线.本文在分析载波电子散斑干涉条纹自身特征的基础上,提出了一种基于载波条纹调制方向提取条纹中心线的方法.该方法首先通过同态滤波有效滤除高频乘性散斑噪音,提取出载波条纹;然后应用基于调制方向提取中心线算法确定载波条纹灰度极值点并做二值化处理;再采用基于中心线拟合或者基于条纹间距的边沿中心线补偿法,获得完整的条纹中心线图.实验结果表明:该方法简单、可靠,能快速、准确地提取出连续的中心线.     

一种位相板衍射图样的图像处理新方法

本文介绍了在半导体激光光纤和位相板相结合的准直情况下，利用ＣＣＤ探测器测量大尺寸形位误差的原理，并针对位相板衍射图像的特点，提出了一种处理此类衍射图样的图像处理新方法——投影法。同在时间上采用的多次平均的方法相比较，投影法相当于采用了空间上的平均，消除了ＣＣＤ表面保护玻璃形成的干涉条纹的影响，对空气扰动也起到了很好的抑制作用。并且使二维图像处理变为一维计算，大大提高了计算速度     

不同后处理方法对溶胶-凝胶SiO2膜层抗污染能力的影响

以正硅酸乙酯作为前驱体,利用碱催化方式制备了SiO2溶胶,采用提拉法在K9基片上镀制SiO2单层薄膜,分别用热处理、紫外辐射处理、氨水加六甲基二硅胺烷气氛处理和酸碱复合膜4种后处理法对膜层进行处理,采用分光光度计、红外光谱、扫描探针显微镜、静滴接触角测量仪、椭偏仪等分析了薄膜的特性,通过真空环境加速污染实验对处理前后的膜层进行抗污染能力对比,结果表明:在碱性SiO2膜层上加镀一层酸性SiO2膜的复合膜层整体透过率仍保持在99%以上,疏水角达到128°,膜层真空抗污染能力大大加强。     

Fast full-field out-of-plane deformation measurement using fringe reflectometry

Full-field out-of-plane deformation measurement of specular surfaces can be implemented quickly and conveniently using fringe reflectometry. The system configuration is simple and processing is fast. With the assistance of an advanced fringe pattern processing technique, the windowed Fourier ridges method, only a single two-directional fringe pattern is necessary for determination of the deformed surface profile. Thus, the whole measurement only requires a single image with the potential for high speed or even real time measurement.     

Noise removal in three-fringe photoelasticity by median filtering

In three-fringe photoelasticity, the total fringe order is obtained by comparing the colour of the unknown photoelastic fringe pattern with a calibration specimen. Comparison is conventionally done by minimising the colour difference error using the least square method. This can give the total fringe order from a single-colour isochromatic field. This technique, however, leads to misidentification of fringe order in some regions. Some researches have proposed boundary identification technique to remove this error. Whilst this ensures continuity of fringe order data over the domain, this does not provide accurate results for every region. A simpler method has been proposed in this paper using median filtering which can be easily undertaken using any standard image processing software. The method is demonstrated with the help of a simple example of disc under diametral compression.     

散斑干涉相位条纹图的频域滤波处理

为了解决在数字散斑干涉技术测量时,散斑干涉相位条纹图像中大量噪声对相位解包裹结果和精度产生严重影响的问题,介绍了一种条纹正余弦分解和频域低通滤波结合的方法,实现了散斑干涉相位条纹图的高精度滤波。该方法的基本思路是在对相位图像进行滤波处理前,先将相位图通过正余弦函数进行映射转换成两幅图,分别经过频域滤波,然后再合成为相位图。这种分解频域滤波方法可以在滤波的同时,有效保留相位跳变信息。实验结果表明：与传统的图像降噪方法相比,该方法能够在保留图像“尖峰”信息的基础上,较好地滤除图像中的散斑噪声,方法简单有效,有效解决了传统滤波方法应用在相位条纹图中,相图灰度信息丢失10%~40%的问题。     

The smoothing of electronic speckle pattern interferometric images

A simple method of smoothing electronic speckle pattern interferometric images is demonstrated. A new image is created from the original by assuming that the speckles can be modelled as multiplicative noise, and replacing each pixel by the variance of grey level intensities taken over a rectangular window. Results from several window sizes are presented. The amount of smoothing is estimated by inspection of the amount of noise left following the application of a fringe minima detection algorithm to the smoothed image.     

散斑条纹图的自适应窗口滤波方法

针对散斑噪声很难用常用的滤波方法进行滤除,在已有等值线滤波方法的基础上,提出一种更优的自适应窗口滤波方法。由于等值线窗口是在条纹方向图的基础上得到的,深入研究条纹方向的求取方法,提出了一种更为可靠的条纹方向求取算法,在得到高精度条纹方向的同时,还能估计出条纹的密度。使用等值线窗口技术,保持了窗口形状的自适应能力,然后利用对条纹密度的估计,根据条纹的宽度来确定滤波窗口的大小,实现了滤波窗口大小的自适应。最后,根据条纹方向和滤波后的图像可以直接得到条纹密度变化较大的单幅散斑图的相位结果。     

结构光照明显微中的偏振控制

结构光照明显微(structured illumination microscopy.SIM)作为一种宽场超分辨光学显微成像技术,具有成像速度快、光漂白和光毒性弱等优点,是目前主流超分辨成像方法之一.在SIM技术中,正弦强度分布的条纹结构光场的对比度决定了SIM超分辨图像的质量.低的条纹对比度将导致样品中超衍射极限的高频信息被噪声掩盖,从而无法解析出超分辨信息.结构照明入射光的偏振态调控决定了干涉条纹的对比度,是SIM的关键技术.鉴于此,本文总结对比了几种典型的SIM系统偏振控制方法,同时提出了一种使用零级涡旋半波片的偏振控制方法.实验证明,与其他方法相比,采用零级涡旋半波片法可以获得更高效的偏振控制效果,具有系统结构简单、易使用、可将光能利用率提升到接近100%的优点.     

A combined method for obtaining fringe orientations of ESPI

Fringe orientation can direct the processing of fringe patterns and provide basic information for understanding the fringe patterns. The gradient method is popularly used for its convenience but it is easily affected by noise. The plane-fit method is capable of obtaining precise local fringe orientation despite the high speckle noise but it is strict with the calculating window size. In this paper, a combined method is proposed. This method uses the plane-fit algorithm to get local gradients and uses the gradient method to get the orientation results from these gradients. It can be seen that this new method can get more accurate orientations for ESPI than both the gradient method and the plane-fit method.     

散斑杨氏条纹图的全自动处理与识别

本文应用数字图象处理技术在AppleⅡ和IBM-PC图象处理系统上实现了散斑杨氏条纹图的全自动分析。文中采用二维灰度值检测的方法获取条纹的准峰值或谷值二值图,然后通过细化得到条纹中心。识别条纹间距时充分利用了整幅图杨氏条纹间距信息使识别结果具有高的精度。提出了用记忆跟踪算法结合线性回归的方法识别杨氏条纹倾角。最后给出了实验结果。     

Measurement of a transparent object by using an automated Talbot interferometer

It is reported that the first partial derivative of the phase distribution for a transparent object can be measured automatically by a personal computer with an image processor. The moire pattern is formed by superimposing the Fourier image distorted by the transparent object on the master grating. But if only the moire patterns are observed, it is not shown if the fringe order numbers increase or decrease. The fringe scanning method is presented to overcome the fringe order numbers. The four-step method is used to calculate the first partial derivative. By a simple experiment, the first partial derivative can be shown in the three dimensional graphics.     

条纹法提高成像分辨率的实验研究

 对利用条纹场照射目标以提高成像分辨率的方法进行了实验研究。条纹法提高成像分辨率的基本思想是，采用余弦条纹场照射目标，光学系统截止频率外的一部分高频分量将通过光学系统，通过对用多幅同频条纹场照射目标所获得的图像序列进行综合处理，可以获得超分辨率的图像。实验采用激光形成的干涉条纹场照射目标，共采用10幅余弦条纹场，各幅条纹场之间依次有1/10个周期的平移，对这10幅条纹场照射目标时所拍摄的图像进行综合处理，获得了分辨率提高的图像。实验结果证明了利用干涉条纹场照射目标获得超分辨率像这一方法的可行性。     

基于改进旋滤波的电子散斑干涉图滤波方法

电子散斑干涉术条纹图在成像时不可避免地受散斑噪声调制,去除噪声是散斑干涉条纹处理的一项重要任务。利用散斑条纹图的方向性,提出一种基于模糊方向的旋滤波:在当前点的领域内定义4个模糊方向窗口,将传统旋滤波的一维、精确方向窗口的确定,转变为模糊方向窗口的确定;在确定的窗口内进行低通滤波时,采用自适应加权均值滤波代替传统的中值滤波。利用该方法分别处理模拟散斑条纹图和实验所得的真实条纹图,并与传统旋滤波、双边滤波和小波丢弃子带方法比较。实验结果表明,该改进算法在滤除散斑条纹图噪声的同时,有效保护了条纹的细节信息。     

Quantitative vibration amplitude measurement with time-averaged digital speckle pattern interferometry

A new method of using time-averaged digital speckle pattern interferometry for the quantitative measurement of vibration amplitude was developed. Signal processing techniques especially the Hilbert transformation for quantitative evaluation of the Bessel fringes obtained in time-averaged digital speckle pattern interferometry were explored. The quadrature signal after Hilbert transformation is equivalent to a 90° phase-shifted interferogram for a monotonically increasing or decreasing phase function. An algorithm was developed for Bessel fringe contrast enhancement and phase extraction. The techniques were tested numerically and experimentally. Sub-fringe quantification of the time-averaged vibration fringes is realised with the proposed method. Compared with the commonly used phase shift method which requires a minimum of two images for image processing, this method requires only one fringe pattern for data extraction.     

Automatic Young's fringe analysis in the source image plane

Typically Young's fringe pattern automatic analysis from a double-exposure image (e.g. a photograph) passes through an indirect processing stage on some intermediate parameter domain. Here, we propose a method based on a complicated image processing technique, operating directly with the source fringe image pixels, and providing remarkable accuracy and computational time. This method is intended for laser speckle velocimetry (LSV), particle image velovimetry (PIV), and digital image velocimetry (DIV) applications. Assuming a common fringe pattern model, we introduce a pre-processing stage to improve significantly the fringe discernment. A dynamic thresholding segmentation scheme, adjusted to the fringe spatial structure, follows to localize the fringes being quantitatively attributed with the corresponding eigenvectors. The algorithm has been tested on real patterns as well as on a set of artifically simulated images with pre-defined characteristics.     

High-resolution time-average electronic holography for vibration measurement

Time-average electronic holography (also known as TV holography) is a widespread technique used in real-time, non-contact, whole-field vibration measurement. The quantitative interpretation of time-averaged fringe patterns is difficult because of speckle noise and of the decreasing visibility of higher-order Bessel fringes. Speckle noise may only be reduced during image acquisition, by multiple-frame averaging.The objective of this paper is to present two new methods allowing to obtain time-averaged fringe patterns presenting a high resolution and a high contrast between dark and bright fringes, as well as the associated quantitative interpretation. They are based on the elimination of the random phase component and on the reduction of the random intensity component of the time-averaged fringe pattern. The fringe patterns obtained by this method may be efficiently filtered in order to provide the precise locations of the Bessel-type fringes associated with the object vibration. The methods rely on the use of the simplest standard equipment, without any need for modulators or stroboscopic devices. Quantitative fringe interpretation is straightforward and based on the method of fringe skeletonizing and indexing. Fringe contrast is so high that skeletonizing may be done by simple thresholding.     

Automated optical analysis of young's fringes— optical autocorrelation

Extraction of displacement or velocity data from laser speckle photography or particle image velocimetry transparencies requires measurement of the spacing and orientation of several thousand Young's fringe patterns. In contrast with classical interferometry, fringes formed in this way have poor visibility and it is generally desirable to compute the two-dimensional Fourier transform in order to extract the fringe frequency. The large amount of data produced makes digital acquisition and image processing computationally intensive and time consuming. This paper introduces an automated processor which utilises a photorefractive crystal of bismuth silicon oxide to perform this analysis in a fast and cost-effective manner.     

The leveling of mask and wafer in proximity nanolithography using fringe pattern phase analysis

The fringe pattern phase analysis method is proposed for the leveling of mask and wafer in proximity lithography. The tilt between mask and wafer in the space is reflected in the tilted fringe pattern. The method combining the 2-D Fourier transform and 2-D Hanning window is proposed for processing the tilted fringe pattern. The offset and angle of tilt are extracted through phase analysis. Computer simulation and experiment are both performed to verify this method. The results indicate that the tilt of the mask and wafer in the space can be extracted with high accuracy through this method.