The velocity measurement of phase objects

Conventional laser velocimeters rely upon small contaminant dust particles to scatter the laser light. A technique is described which requires no contaminant particles but relies upon minute refractive index variations in the fluid. By placing the detector far from the measuring region a set of shadow bands is produced which is convected with the fluid. The velocity is measured by either correlating the light transmitted by two slits or by measuring the frequency of the light transmitted by a grating.     

Novel processing tools for automated doppler picture veocimetry (DPV) evaluation

A unique technique, the Doppler Picture Velocimetry (DPV), for measuring and visualizing velocities especially in hypersonic gas flows is presented. By means of a Michelson interferometer (MI) the Doppler shifted light scattered by tracers is transformed into an image showing Fizeau fringes. The image fringe distribution provides information on the Doppler frequency shift which is related to the velocity of the particles crossing a light sheet plane. To overcome former disadvantages of DPV, the optical set-up as well as the processing scheme have been improved significantly. Two schemes have been tested in recent times for fringe processing: 1) an alternative process, the Least Square Estimators (LES) and 2) an algorithm based on a technique using Fast Fourier Transformations (FFT) to examine the DPV images in the frequency domain. The new DPV algorithms now allow an automated calculation of the velocity profiles from the Doppler pictures without manual fringe tracing as it had to be done in the past. Both methods are compared by means of Mach 6 flows around a wedge and a sphere produced in the ISL high energy shock tunnel STA. TiO₂ particles are illuminated by a laser light sheet which was perpendicularly arranged to the main flow direction. Light observation via the MI from the side (90° to illumination) informs on the vertically oriented velocity through the DPV images.     

Real-time color holographic interferometry devoted to 2D unsteady wake flows

A new optical technique based on real time holographic interferometry in true colors has been implemented around the transonic wind tunnel of the ONERA-Lille center to analyze 2D unsteady wake flows. Tests realized in color interferometry, real time and double exposure, use simultaneously three wavelengths of a continuous waves laser (argon and krypton mixed) and holograms are recorded on silver-halide single-layer panchromatic Slavich PFG03c plates. The very principle of real-time true color holographic interferometry uses three primary wavelengths (red, green and blue) to record, under no-flow conditions, the interference among the three measurement beams and the three reference beams simultaneously on a single reference hologram. After the holographic plate is developed, it is placed on the test setup again in the position it occupied during exposure and the hologram is illuminated again by the three reference beams and three measurement beams. A flat, uniform color can then be observed behind the hologram. So a horizontal, vertical, or even circular fringe pattern can be formed and the achromatic central fringe can be made out very clearly. The single color is used to determine the path difference zero on the interferograms. The flow studied was the unsteady flow downstream of a cylinder placed crosswise in the test section. A sequence of hundred interferograms was recorded on the flow around the cylinder at Mach 0.37. The vortex formation and dissipation phases can be seen very clearly, along with the fringe beat to either side of the cylinder.     

Analysis of coherent gradient sensing (CGS) by fourier optics

A coherent laser beam reflected or transmitted from a deforming plate specimen acquires an optical path difference (phase change) which is related to the deformation and stress field. The optical method of Coherent Gradient Sensing (CGS) uses two parallel grating plates to displace (shear) and recombine the distorted light beam emerging from the specimen. Fringes are produced on the image plane by the interference of the shifted and unshifted beams. The fringe pattern is related to the spatial difference of the phase in the shearing direction. If the shearing distance is small enough, the spatial difference of the phase approximates to its gradient. Each fringe in the image represents a locus of equal gradient component of the phase in the shearing direction. The technique is interpreted by means of wave optics, using the Fraunhofer approximation and the paraxial theory of lenses. The assumptions made in earlier analyses have been removed here. A more precise analysis based on Fourier optics is presented. The simplicity of the optical setup and variable resolution of the technique have led to its frequent use in the area of solid mechanics, including fracture mechanics. Some examples are discussed in the second half of this paper.     

外腔延时反馈半导体激光器混沌偏振可调控制方法研究

提出外腔延时反馈半导体激光器混沌偏振可调控制方法,分别建立了垂直正交偏振延时双反馈、同偏振面方向延时双反馈以及任意可调偏振延时双反馈激光动力学物理模型. 通过调节激光器外腔光路中的平面镜和光衰减器可控制一平面偏振反馈光的延时时间及光反馈量,或调节一偏振反馈光的偏振面到另一个偏振反馈光的偏振面方向上或者到任意偏振方向都可进行激光混沌控制. 数值结果证明该方法可以控制激光混沌到单周期态、多周期态等,还发现该控制可使激光器同时呈现偏振周期振荡、偏振反周期振荡、稳定三种动力学行为等. 关键词： 混沌 控制 激光器 偏振     

Driving and analysis of micro-objects by digital holographic microscope in microfluidics

We propose an optical configuration in which floating particles in a microfluidic chamber can be characterized by an interference microscopy configuration to obtain quantitative phase-contrast maps. The configuration is simply made by two laser beams from the same laser source. One beam provides the optical forces for driving the particle along appropriate paths, but at same time works as the object illumination beam in the holographic microscope. The second beam plays the role of the reference beam, allowing recording of an interference fringe pattern (i.e., the digital hologram) in an out-of-focus image plane. The system and method are illustrated and experimental results are offered for polymeric particles as well as for in vitro cells with the aim to demonstrate the approach.     

A Bessel beam laser Doppler velocimeter

We present a laser Doppler velocimeter that is based on the use of two intersecting Bessel beams instead of the conventionally used Gaussian beams. Due to the quasi non-divergent nature of the Bessel beams, a short effective measurement volume of about 40 μm length could be realized with a low fringe spacing variation of 0.3%. Both of these advantageous values were experimentally verified in flow measurements.     

电子在激光驻波场中运动产生的太赫兹及X射线辐射研究

采用单电子模型和经典辐射理论分别对低能和高能电子在线偏振激光驻波场中的运动和辐射过程进行了研究. 结果表明: 垂直于激光电场方向入射的低速电子在激光驻波场中随着光强的增大, 逐渐从一维近周期运动演变为二维折叠运动, 并产生强的微米量级波长的太赫兹辐射; 高能电子垂直或者平行于激光电场方向入射到激光驻波场中, 都会产生波长在几个纳米的高频辐射; 低能电子与激光驻波场作用中, 激光强度影响着电子的运动形式、辐射频率以及辐射强度; 高能电子入射时, 激光强度影响了电子高频辐射的强度, 电子初始能量影响着辐射的频率; 电子能量越高, 产生的辐射频率越大. 研究表明可以由激光加速电子的方式得到不同能量的电子束, 并利用电子束在激光驻波场的辐射使之成为太赫兹和X射线波段的小型辐射源. 研究结果可以为实验研究和利用激光驻波场中的电子辐射提供依据.     

Fringe skeletonizing using an improved derivative sign binary method

A modified derivative sign binary method is proposed to extract fringe skeletons from interferometric fringe patterns. A fringe direction map ranging from 0° to 360° is obtained with an unambiguous relationship between the grayscale and fringe tangent direction. Using this approach, the derivative sign binary map is detected without a fringe direction jump. The dark (light) fringe intensity minimum (maximum) can be extracted automatically to define fringe skeletons. In addition, two different anisotropic one-dimensional filters are described that can be used for further improving the fringe quality. Examples are provided for a holographic interferogram and a Moiré fringe pattern to illustrate applications and benefits of the approach.     

同轴双无衍射光的理论与实验

提出同轴双无衍射光的概念。如果两束汇聚角略有不同的同轴无衍射光同时存在，则它们相互之间叠加干涉后产生一种纵向呈周期变化的光场结构，这是一种新的光束空间分布，这种光束在横向仍是一种同心环光斑，可用于精密对准。而在不同纵向位置，这些同心环的强度分布是不同的，且是周期性变化的。同轴双无衍射光的轴向周期性可用于沿光束传播方向的定位。文中提出了双环缝法、分段圆锥透镜法、正弦相位环光栅法等实现同轴双无衍射光的理论与实验方法，分析了同轴双无衍射光的横向与纵向传播的衍射光斑特性，理论计算与实验测量的结果基本相符合。     

Direct Fabrication Methods of Surface Relief Electro-Optic Gratings in Azo-Polymer Films

Two fabrication methods of surface relief electro-optic (EO) gratings in azo-polymer films are described: surface deformation by a continuous wave laser and laser ablation by a pulse laser. In the fabrication process, the periodic intensity modulation of laser beams is formed by an interference fringe or a phase mask. The surface relief EO grating is fabricated by poling the surface relief grating (SRG) after the SRG fabrication process. The linear dependence of an applied voltage in the modulation efficiency of the first-order diffraction beam is observed. The proposed methods are effective for highly-efficient surface relief EO grating fabrication.     

Refractive index profiling of a GRIN optical fiber using a modulated speckled sheet of light

A method for calculating the refractive index of GRIN optical fiber from its transverse interference pattern is presented.In this method the transverse interference fringe pattern through an optical fiber using a sheet of light is applied to get the refractive index profile of it. The optical fiber is not immersed in a matching liquid as used in different techniques [Barakat N, El-Hennawi HA, El-Zaiat SY, Hassan R. Pure Appl Opt 1996;5:27].In this method a sheet of He–Ne laser light is allowed to illuminate the fiber. The light sheet is divided into two parts, the first is refracted through the fiber while the second is used as a reference beam. Interference pattern will be obtained between these two rays displaying the refractive index variation along the fiber radius.The fringe shift of such interference pattern has been measured and used to calculate the deflection angle of light refracted by the fiber and the cladding. An equation is derived to calculate the refractive index profile difference ratio δn at different positions across the fiber cross section in terms of the corresponding deflection angle and is verified experimentally.The optical path difference between these two rays (refracted and reference beam divided by the fiber) has been derived and the fringe shift obtained has been used to calculate the refractive index profile of the fiber.Introducing a ground glass screen on the passage of the two light beams (refracted and reference beam divided by the fiber), two superimposed identical speckle patterns are formed leading to the formation of a third speckle pattern modulated by a grid structure displaying the optical thickness of the fiber.     

非平行光干涉照明显微镜三维形貌检测研究

为实现表面微观形貌快速而较简单的检测, 一种使用非平行光干涉照明的光学显微三维形貌检测方法被提出。该方法使用空间光调制器对激光光束进行衍射, 选取光强相近的2个衍射级通过显微物镜, 双光束干涉可得到周期接近图像分辨率、相位可精确调节的照明条纹, 被测样本的三维形貌可通过拍摄4帧等相位差的条纹照明图像来计算得到。该方法不需借助干涉物镜产生条纹, 不需要轴向扫描装置记录条纹变化, 相位调节精确, 成像直观。此外, 该方法所产生干涉条纹的相位随坐标线性变化, 不需对条纹周期进行修正。因为照明条纹参数调节光路独立于显微成像光路, 系统装置具有光路简洁、易于调节的优点。为验证所提出三维检测精度, 以粗糙度100 nm的粗糙度对比模块和硅片为被测样品进行了三维轮廓重建实验, 实验结果显示, 所提出方法轴向重复性测量精度为8.6 nm(2σ)。     

Solid state and fibre optic laser doppler velocimeters

Laser Doppler velocimetry (LDV) has become established as an important technique for the measurement of velocities of macroscopic objects and fluids: the dynamic range is large (～10^-6-10⁵ ms^-1) and the measurement is absolute and non-invasive. However, the size and cost of LDV has restricted its use in some areas. This paper presents two separate approaches to reduce these problems: we describe a compact LDV system incorporating a solid state laser diode and also an investigation of the feasibility of a fibre optic LDV system in which the conventional optical components are replaced by fibre optics.The experimental arrangement used for the solid state LDV system was of the Doppler difference type; i.e. a system of parallel interference fringes is focused in the measurement volume, so that a particle passing through this volume produces a scattered light signal which is intensity modulated. In its simplest form, the technique cannot determine the direction of motion of the particle, but this difficulty may be overcome by causing the fringes to ‘move’ within the measurement volume with known velocity. In the present experiments, the laser output frequency was modulated by modulating its drive current; since the path lengths of the two beams interfering in the measurement volume were unequal, fringe motion was achieved.The fibre optic LDV experiment was also of the Doppler difference type, and it was demonstrated that the necessary stabilised interference fringe system could be projected using a fibre optic system. An electronic servo was devised to compensate for the random differential thermal drifts in the fibres which would otherwise have produced unacceptable drifts in the fringe pattern.     

基于声光栅的变频条纹投射系统

针对三维形貌测量中结构光照明系统投影速度慢、结构复杂、在线集成困难的问题,提出了一种基于声光栅的变频条纹投射系统。该系统利用拍频信号驱动声光偏转器,在声光晶体中形成两个重叠的光栅,光源发出的激光以布拉格角入射,形成两束一级衍射光,经透镜聚焦形成光强按正弦规律分布的结构光条纹。建立了数学模型,同时提出了一种新的相位凝固技术,使条纹空间频率和相位的变化规律得到了很好的解释。该系统结构紧凑、体积小,全电控可调,无任何机械移动部件,具有条纹投影速度快、精度高、动态可编程的特点。应用该系统对石膏像形貌进行测量,获得了用于三维成像的相位图。该投射系统对于解决复杂几何形状物体的三维测量问题具有较高的工程应用价值。     

利用APD对大气气溶胶空气动力学直径测量分析

详细介绍了气溶胶大气粒子经过两个激光束后通过雪崩二极管（APD）探测其形成的双峰信号,从而得到气溶胶粒子飞行时间的方法,利用标准粒子对飞行时间进行校准后,实现了对大气气溶胶粒子直径的实时监测.通过不同粒径多组的实验数据进行分析组成专家模式,代入系统进行空气测量或标准粒子测量,得到的实验值与理论值一致.     

New physical techniques for IC functional analysis of on-chip devices and interconnects

Localization of functional fails in ICs makes use of physical interactions that the devices produce under electrical operation. The focus is on electroluminescence (keyword: photon emission) and signal responses to stimulation by scanned beams of laser light or particles. In modern chip technologies access of this information is only available through chip backside. This paradigm shift requires a full revision of chip analysis techniques and processes. This has also been a kick-off of a rush in development of new methodologies. Here, an overview is given which parameters are crucial for successful analysis techniques of the future and how photon emission, laser based techniques and new preparation techniques based on focused ion beam (FIB) open the path into this direction.     

Particle-Induced Limits of Accuracy in Laser Doppler Anemometry

Laser Doppler anemometry (LDA) is one of the most advanced optical measuring techniques for flow velocities and is widely used in industrial and academic laboratories. Based on numerous applications in the past, there is no doubt that LDA is one of the most accurate flow measuring techniques. However, recent investigations have shown that the period lengths of LDA signal bursts are not as constant as one might expect within the individual burst. This can induce an additional scatter in the signal frequency and in the determination of flow velocity from individual bursts. This paper describes experimental investigations which show qualitatively and quantitatively that the particle passage through the laser beams shortly before the point of intersection, i. e. the LDA measuring volume, yields a distorted LDA fringe pattern. The latter results in a scatter of the measured velocity data for those particles passing the center of the measuring volume at the same time.     

Doppler-free two-photon spectroscopy

We describe atomic transitions where two or more photons are simultaneously absorbed by an atom or a molecule (without any intermediate resonant level). We show theoretically and experimentally the possibilities of these transitions for numerous high-resolution spectroscopic studies. The principle of the method is discussed: the Doppler broadening is suppressed in two-photon transitions if the atoms are irradiated by two laser beams travelling in opposite directions, because the Doppler shift in one wave cancels that in the other. A generalization is made for multiphotonic transitions. Calculations of the multiphotonic transition probability are summarized and their hypotheses specified: one deals with line shape and orders of magnitude in practical conditions. The problem of light shifts is also discussed. A typical experimental set-up with a cw dye laser is described in detail. Typical recordings of two-photon transitions are given; they show line widths smaller than 4 MHz (on a Doppler width of 2000 MHz). Other experiments show the possibility of increasing the transition probability by using two lasers with slightly different wave lengths. One experiment with a three-photon Doppler-free transition is also described. In conclusion, we make a brief comparison with the saturated absorption technique.     

高质量全息光栅的制作

全息光栅由感光版记录高斯光束干涉条纹制得 ,干涉条纹的不等宽性降低了光栅品质。制取高质量全息光栅的关键是要用均匀平面波作光源。在分析干涉区内光强分布的基础上 ,给出了制作等周期正弦全息光栅的两种方法 :限制曝光区大小的方法和高斯光束强度均匀化的方法。