偶氮胂(Ⅲ)光度法测定催化剂中的镧

研究了分光光度法测定催化剂中的镧含量。在 p H=2 .8— 3.0条件下 ,镧与偶氮胂 ( )显色生成稳定络合物 ,最大吸收波长为 6 5 8nm,表观摩尔吸光系数 ε658=5 .2 3× 10 4L· mol-1· cm-1,线性范围为 0—5 0μg/2 5 m L ,相对标准偏差 <2 % ,加标回收率为 98%— 10 2 % ,方法准确、可靠。     

对乙酰基偶氮氯膦与镧显色反应的研究及应用

研究了对乙酰基偶氮氯膦与镧的显色反应 ,在 0 .2 mol/L 盐酸介质中 ,有乙醇及吐温 - 80存在时 ,生成3∶ 1紫色络合物。 λmax=6 75 nm,ε=7.33× 1 0 4 L· mol- 1· cm- 1。采用双波长法 ,以 5 30 nm为参比波长 ,6 75 nm为测定波长 ,ε=9.2 0× 1 0 4 L· mol- 1· cm- 1 ,镧含量在 0— 37.5 μg/2 5 m L范围内符合比耳定律。本法用于电子工业钛酸镧烧结中游离氧化镧的测定 ,结果令人满意。     

对乙酰基偶氮胂分光光度法测定分子筛中的镧

本文研究了在 p H3.0的 Cl CH2 COOH- Na OH介质中 ,La( )与对乙酰基偶氮胂 (ASAp A)显色生成蓝绿色络合物。络合物最大吸收波长位于 6 70 nm,表观摩尔吸光系数 ε670 nm=7.32× 10 4 L·mol-1·cm-1。镧与对乙酰基偶氮胂形成的络合物组成比为 1∶ 2 ,镧含量在 0— 1.2 μg/ m L范围内符合比耳定律。并考察了共存离子干扰。本方法用于分子筛中镧的测定 ,结果令人满意。     

涂镧石墨管-电热原子吸收法测定环境样品中微量钡

建立了硝酸镁作基体改进剂 ,镧涂层石墨管原子吸收法测定钡的方法 ,有效地避免了碳化物的生成 ,提高了测定灵敏度 ,测定土壤标样和环境水样中钡的含量。方法的检出限为 2 1× 10 - 1 2 g ,对于 15ng·mL- 1钡的测定相对标准偏差为 5 4%。     

4-(2-羟基-4-硝基苯偶氮)-1-苯基-3-甲基吡唑啉酮光度法测定烟草中镁

研究了 4 - (2 -羟基 - 4-硝基苯偶氮 ) - 1-苯基 - 3-甲基吡唑啉酮 (HNAPMP)与镁的显色反应 ,在 p H=10的硼砂 -氢氧化钠缓冲介质中 ,HNAPMP与镁反应生成 2∶ 1稳定络合物 ,λmax=5 2 2 nm,ε=3.5 8× 10 4L·mol-1· cm-1。镁含量在 0— 2 0 μg/2 5 m L范围内符合比耳定律 ,方法用于烟草样品中镁含量的测定 ,结果令人满意     

微波消化-固相萃取光度法测定生物样品中的钴

根据 2 - (2 -喹啉偶氮 ) - 1,5 -苯二酚 (QADHB)与钴的显色反应及 C18固相萃取小柱对显色络合物的固相萃取 ,建立了一种测定生物样品中痕量钴的新方法。在 p H=4 .0的 HAc- Na Ac缓冲介质中 ,溴化十六烷基三甲基铵 (CTMAB)存在下 ,QADHB与钴反应生成 2∶ 1稳定络合物 ,该络合物可用 C18固相萃取小柱富集 ,小柱上富集的络合物用乙醇 (内含 2 %乙酸 )洗脱后用光度法测定 ,络合物最大吸收波长为5 80 nm,钴含量在 0— 0 .8μg/m L范围内符合比耳定律 ,摩尔吸光系数 ε=5 .6× 10 4L· mol-1·cm-1。本方法用于几种生物样品的分析 ,结果令人满意。     

7-(苯并噻唑-2-偶氮)-8-羟基喹啉-5-磺酸与镉显色反应的研究和应用

在 p H4 .8的邻苯二甲酸氢钾 - Na OH介质中 ,非离子表面活性剂 Tween- 80存在下 ,7- (苯并噻唑 - 2 -偶氮 ) - 8-羟基喹啉 - 5 -磺酸 (BTAQS)与镉形成 2∶ 1的紫红色配合物 ,其最大吸收波长 λmax=5 6 0 nm,表观摩尔吸光系数为 8.71× 10 4L· mol-1·cm-1,镉含量在 0— 6 μg/ 10 m L范围内服从比耳定律。用于矿样中镉的测定 ,相对误差小于 3% ,相对标准偏差小于 2 .5 % (n=5 )。     

2-(2''-喹啉偶氮)-5-二甲氨基苯甲酸光度法测定钢铁中的钴

合成了新试剂 2 - (2’-喹啉偶氮 ) - 5 - N,N-二甲氨基苯甲酸 (QADMAB) ,并研究了其与钴的显色反应 ,在 p H=4 .0的 KH2 PO4- K2 HPO4缓冲介质中 ,CTMAB存在下 ,QADMAB与钴反应生成 2∶ 1稳定配合物 ,λmax=6 2 0 nm,ε=1.2 5× 10 5L·mol-1· cm-1。钴含量在 0— 0 .4 mg/ L范围内符合比耳定律 ,方法用于钢铁样品中钴含量的测定 ,结果令人满意     

对硝基酚荷移分光光度法测定甲氧苄啶的含量

在水溶液中甲氧苄啶与对硝基酚发生反应生成 1∶ 1的荷移络合物。络合物最大吸收波长 4 0 2 .4 nm,线性范围 2— 2 5 μg/ m L,表观摩尔吸光系数为 ε=8.4 6 8× 10 3 L· mol-1· cm-1,回收率为99.6 7%— 10 0 .4 % ,相对标准偏差为 1.3% (n=5 )。本法测定甲氧苄啶药物制剂含量 ,结果令人满意。     

溴化5-[4-(3-吡啶丙氧基苯基)]-10，15，20-三苯基卟啉对铜离子显色反应的研究

本文研究了溴化 5- [4 - (3-吡啶丙氧基苯基 ) ]- 10 ,15,2 0 -三苯基卟啉 ,在 p H=4 .0时与 Cu2 + 的显色反应条件 ,其络合物最大吸收波长为 4 13nm。在相同条件下 ,试剂最大吸收波长为 4 4 4nm,对比度大约30 nm。试剂与铜络合比为 1∶ 1,表观摩尔吸光系数为 2 .9× 10 5L· mol-1·cm-1,铜含量在 0— 6 0 μg/ L范围内符合比耳定律 ,可用于痕量铜的测定。     

水杨酸镧的流变相合成、表征及掺杂Tb3+的水杨酸镧的发光性质

用流变相反应法合成了水杨酸镧和掺杂Tb3 的水杨酸镧 ,通过元素分析 ,TG ,DTA ,X射线粉末衍射及红外光谱分析确定了水杨酸镧的组成、晶体结构和羧酸根与金属离子的配位方式 ,测定了掺杂Tb3 的水杨酸镧的激发和发射光谱 ,并对其发光特性进行了讨论。X射线粉末衍射表明该化合物为具有层状结构的单斜晶系 ,晶胞参数为 :a =2 1 6 0 1 0 ,b =1 3 80 1 5 ,c =3 81 0 3 ,β=97 1 1° ,V =1 1 2 7 2 3 ,Z =2 ,ρcal =1 6 2 1g·cm-3 ,ρexp =1 6 5 3g·cm-3 。掺杂Tb3 的水杨酸镧固体样品在紫外光激发下可观测到很强的三价铽离子的绿色发光 ,其中5D4→ 7F5的跃迁发射最强。     

Gallium Lanthanum Sulphide Fibers for Infrared Transmission

Gallium lanthanum sulphide (GLS) glass and fiber have potential for use in both active and passive infrared applications. In this paper the optical, thermal, and other key properties, which are essential for understanding the applications and crucial in the quest for practical fibres, are discussed. Glass preparation by melt-quenchingand subsequent fibre fabrication is described using both rod-in-tube and extruded preforms. Absorptive and scattering losses are explored as they could represent a fundamental limitation to successful device fabrication. Potential passive and active applications are reported and the prospects for a future generation of sulphide fiber-based devices examined.     

电子束蒸发沉积六硼化镧薄膜的逸出功(英文)

六硼化镧(LaB6)具有电子逸出功低、高熔点和高化学稳定性等优点,是制作热阴极和场发射阴极的理想发射体材料。而且在常规场发射尖锥表面涂敷一层LaB6薄膜能够大幅度提高场发射尖锥的发射能力。为了测量LaB6薄膜的逸出功,采用电子束蒸发技术沉积LaB6薄膜,并对薄膜进行了X射线衍射分析和X射线光电谱分析。通过测量薄膜的热电子发射特性和敷LaB6薄膜的硅尖锥阵列的场致电子发射特性确定了LaB6薄膜的逸出功,与块状LaB6多晶材料的逸出功大体相同,说明电子束蒸发沉积技术适合于制备高纯度、低逸出功的LaB6薄膜。     

ICP-AES测定镧铜中间合金中的镧

用ICP-AES测定镧铜中间合金中的镧,试验研究了分析谱线、试液介质及酸度的选择,基体干扰及其消除.方法简便准确,加标回收率在98.7%-101.6%之间.相对标准偏差＜1%,能满足快速检测要求.     

Work Function Measurement of Lanthanum - Boron Compounds

The La-B system was studied between LaB4.24 and LaB29.2, and between 1400 and 2100 K to determine the phase relationship, the chemical activity of the components, the vaporization rate and the vapor composition. A blue colored phase near LaB9 was found to exist between purple colored LaB6 and elemental boron. Diffusion is so much slower than vaporization that large composition differences can exist between the surface and the interior which, nevertheless, produce a steady state loss rate from freely vaporizing material. The flux at 1700 K is 6 × 10-10 g/cm2-sec for LaB4 + LaB6 and 7 × 10-11 g/cm2-sec for LaB6 + LaB9. There is an activation energy which lowers the vaporization rate of boron from LaB6. Freely vaporizing material will have a steady state surface composition between LaB6.04 and LaB6.07, depending on temperaure, purity and interior composition. The free energy of formation of LaB6 is (0.071T-351) kJ/mole between 1700 K and 2100 K.     

Electromagnetic Properties of Lanthanum Manganese Oxides Doped with Iron

The mechanism of GMR effects in La(Mn_1–x Fe _x )O₃ (x=0, 0.01, 0.03) oxides has been investigated by means of magnetic measurements, resistivity measurements in magnetic field and Mössbauer spectroscopy. For the x=0.01 sample, the GMR behavior is similar to that of the conventional (La, A)MnO₃ (A: divalent cations) oxides. For the x=0.03 sample, even though the temperature dependence of the Mössbauer spectra was similar to that of the x=0.01 sample, the mechanism for the occurrence of the GMR effect seems to be different. The x=0 sample shows a similar behavior to the x=0.03 sample. A thermal stabilization of spin fluctuation is proposed for the x=0 and x=0.03 sample.     

Relativistic Multichannel Treatment of Ionic Rydberg States of Lanthanum

Ionic Rydberg energy levels of lanthanum are calculated from first principles by relativistic multichannel theory within the framework of multichannel quantum defect theory. The present calculated results are in better agreement with the experimental measurements than the previous calculations [J. Phys. B 34 （2001）369] due to the consideration of dynamical polarizations. Moreover, in the experimental spectra achieved by a five-laser resonance excitation via the intermediate state 5d6d^3 F2, a series of weak ionic Rydberg states and some of perturbing states are found and assigned in this work.     

酸及镧盐对钙测定的影响

用空气-乙炔原子吸收光谱法(AAS)对不同溶液中钙元素进行检测,研究了盐酸、硝酸、镧盐对Ca测定的影响.结果表明,在使用原子吸收光谱法测定Ca时,测定结果受到盐酸、硝酸、镧盐严重的负干扰.     

First-Principles Calculations of Elastic and Thermal Properties of Lanthanum Hexaboride

The plane-wave pseudopotentiai method using the generaiized gradient approximation within the framework of density functional theory is applied to anaylse the bulk modulus, thermal expansion coefficient and heat capacity of LaB6. The quasi-harmonic Debye model, using a set of total energy versus volume obtained with the plane-wave pseudopotential method, is applied to the study of the thermal properties and vibrationai effects. We analyse the bulk modulus of LaB6 up to 1500 K. The elastic properties calculations show that our system is mechanically stable. For the heat capacity and the thermal expansion, significant differences in properties are observed above 300K. The calculated zero pressure bulk modulus is in good agreement with the experimental data. Moreover, the Debye temperatures are determined from the non-equilibrium Gibbs functions and compared to available data.