复杂结构声辐射模态的计算

结构辐射阻矩阵的特征向量就是其声辐射模态,复杂结构的辐射阻矩阵获取困难阻碍了声辐射模态理论的进一步应用。为此提出一种基于等效源方法的复杂结构辐射阻矩阵计算方法,由此形成了一套完整的计算复杂结构声辐射模态方法。最后通过仿真算例对影响结构辐射阻矩阵计算精度的因素进行了分析,给出了复杂结构辐射阻矩阵构造的一般原则。理论推导和数值仿真算例表明所提出的复杂结构声辐射模态计算方法是有效的。该方法简化了复杂结构声辐射模态的计算,计算效率较高。     

利用声辐射模态重构任意目标的散射声场

水下目标散射声场的重构可以作为水下目标散射特性的研究基础。本文主要利用声辐射模态对水下目标进行散射声场重构研究。首先,在借助声传递矩阵给出的任意结构声辐射模态的流体域求解方法基础上,通过理论证明了目标的散射声压与声辐射模态具有函数关系。其次,借助声场分布模态的概念,同时考虑到声场分布模态病态及声压测量易受噪声污染,提出基于声辐射模态的正则化散射声场重构算法。仿真结果表明,波数越低,重构所需声辐射模态阶数越少,在较高波数时仅需总模态数的大约20%即可对声场进行重构。与基于边界元的声场重构算法相比,计算量减小了至少80%,且克服了赫姆霍兹积分方程最小二乘法仅对球壳结构的重构效果较好而不适用于长条形结构重构的缺陷。     

稀疏测点条件下的结构法向速度重建

为了实现稀疏测点条件下结构表面法向速度的准确重建,利用声辐射模态包含结构表面几何形状信息的性质,以声辐射模态作为基函数提出了一种稀疏测点条件下的结构法向振速重建方法。首先对结构表面的声辐射模态进行计算,并建立结构表面法向振动速度与声辐射模态之间的关系;在此基础上,由实际布置情况形成测点位置处的振速与其声辐射模态值的关系,并通过最小二乘法求得展开系数;最后由展开系数重建出结构表面的全部法向振速。利用两端封闭的双层钢质圆柱壳体在消声水池中进行了试验验证,分别开启激振器和转子台进行激励,两个试验的结果均表明,当测点数目较少时,所测的结果不能准确地表示结构的实际振动情况,在波数域内就表现为与振动相关的波数成份的丢失;利用所提出的方法,可以较为准确地重建和恢复结构的表面法向速度及其波数成份,由此验证了所提出方法的有效性。      

声强测量技术在水下结构辐射噪声近场测量中的应用

本文介绍了强测量技术在水下结构辐射近场测量中的实际测量系统，特别是水下声系统的扫描平面的实现方法及定位误差控制方法，最后讨论和分析了实际测量结果，从而说明该系统用水下声强测量是可行的。     

弯管对末端带弹性障板充液管路辐射声能量的影响

基于声固耦合有限元方法建立了末端带弹性障板的充液管路数值模型,重点分析了不同激励下弯管对管口辐射声能量的影响.结果表明:弯管引入的高阶周向模式耦合使结构振动和流体声传播都发生明显改变,以致系统辐射声能量及主要能量贡献源也发生转移,并随激励方式和频率而不同.对本文管路模型,平面波激励下弯管系统在低频的结构辐射声能量明显增...     

利用声辐射模态对声场进行重构

声辐射模态是定义在振动表面上的一组互相独立的基函数,描绘了振动表面的多极子辐射模式。本文利用声辐射模态对平板辐射的声场进行重构，并同时就频率和模态数对误差的影响进行了分析。针对复杂振动表面幅射的声场，重构时需正则化处理。数值计算结果和对应的理论值达到很好的吻合。     

基于联合波叠加法的浅海信道下圆柱壳声辐射研究

针对浅海信道下弹性结构声辐射预报尚无高效可靠的研究方法,提出了一种浅海信道下弹性结构声辐射快速预报的联合波叠加法.该方法结合了浅海信道传输函数、多物理场耦合数值计算法和波叠加法理论,运用该方法可对浅海信道下弹性结构辐射声场进行快速预报.经数值法和解析解法验证后,从信道下辐射源、环境影响和辐射声场测量的角度研究分析了浅海信道下弹性圆柱壳的声辐射特性,阐释了进行浅海信道下结构声辐射研究的必要性.研究结果表明,仅在低频浅海信道下弹性结构可近似等效为点源,信道上下边界对声场产生显著的耦合影响,高频段的空间声场指向性分布尤为明显,垂直线列阵进行信道下结构辐射声功率测量时,测量结果受到信道环境边界和潜深的影响较大.     

利用源强密度声辐射模态重建声场

为了利用声场中少量测点声压数据精确重建复杂结构的辐射声场,提出了源强密度声辐射模态分析理论和声场重建公式.在结构表面定义的空间上,利用以源强密度分布函数为参量的结构辐射声功率泛函表达式定义了一个线性自伴正辐射算子,该算子的特征函数为结构的源强密度声辐射模态.然后通过对矩形平板和带有半球帽的圆柱体的源强密度声辐射模态的分析,证明了源强密度声辐射模态具有空间滤波特性,并利用该性质建立了声场重建公式.球体仿真和平板实验验证了所提出的声场重建方法的可行性和稳健性.基于源强密度声辐射模态的声场重建方法简单,利用较少测点数据就可以获得较高的声场重建精度,特别适合于复杂结构的低频声场重建.     

充液管路系统流体声与结构声的复合有源控制

采用基于谐频自适应控制算法的有源消声与消振系统对充液管路系统突出的低频线谱噪声进行有源控制实验研究.建立了泵水循环管路实验系统,在管路中安装有源消声器对流体声进行控制,在管路出口障板上采用8×8通道有源消振系统控制结构声辐射。开展的低频线谱噪声与振动有源控制实验结果表明,在50~200 Hz频带内,通过结合有源噪声与振动控制可在多数频点取得10 dB以上的降噪效果。针对该实验系统,通过分别控制流体声和结构声分析了两者的贡献.实验结果验证了有源消声与消振系统具有较好的降噪性能,各频点处流体声与结构声占比情况不同,需要综合控制流体声与结构声才可以取得显著的降噪效果。      

水下声辐射激励水表面声波的特征参数测量

采用激光干涉方法对水下声辐射激励水表面声波的特征参数频率和振幅进行了测量研究。从理论上对水表面声波激光相干测量信号的频谱构成进行了分析,在此基础上提出了水表面声波两个重要声学参数频率和振幅的解算方法,并通过数值仿真进行了验证。搭建了一套简单的激光干涉测量实验系统,对不同频率和声压激励的水表面声波进行了测量实验,验证了水表面声波频率和振幅解调方法的准确性。对水表面声波横向传播的振幅衰减现象进行了初步的实验研究,结果表明水表面声波的频率越高,振幅的横向衰减越快。研究表明激光相干检测方法能够准确地实现水表面声波振幅和频率的测量。      

参量阵扬声器在管道噪声控制中的研究*

为了解决管道有源噪声控制中声反馈造成的系统复杂度和计算量的增加,文中引入参量阵扬声器作为次级声源,利用其强指向性减小控制系统的声反馈。为了验证该方法可行性,本文分别在直管和L管中,对600 Hz单频噪声和频率范围为500 Hz~1000 Hz的窄带噪声进行了管道有源噪声控制,同时测量了参量阵扬声器的管内声场和降噪范围。结果表明,参量阵扬声器声反馈小,在没有声反馈补偿的条件下对单频噪声的降噪效果基本达到了声反馈补偿条件下普通扬声器的降噪效果,对窄带噪声的降噪效果稍差。此外,通过测量管道声场和降噪量,确定了参量阵扬声器的降噪区域为误差传感器下游整个管道,降噪面积为管道整个截面。这说明参量阵扬声器作为次级声源降低了系统的复杂度和算法的计算量,并取得了较好的降噪效果。     

Measurement of acoustic particle velocities in enclosed sound field: Assessment of two Laser Doppler Velocimetry measuring systems

The performances of two Laser Doppler Velocimetry (LDV) systems adapted for measuring the acoustic particle velocities are assessed in enclosed sound field. This assessment is performed by comparing the acoustic velocities measured by means of LDV to reference acoustic velocities estimated from sound pressure measurements. The two LDV systems are based on a single optical bench which delivers an optical signal called Doppler signal. The Doppler signal, which is frequency modulated, is analyzed by means of two signal processing systems, the BSA (Burst Spectrum Analyser from Dantec) on the one hand, and a system specifically developed for the estimation of the acoustic velocity on the other hand. Once the experimental setup has been optimized for minimizing the errors made on the reference velocities, the assessment is performed and shows that both systems can measure the acoustic velocity in enclosed field in two the frequency ranges [0-4 kHz] and [0-2 kHz] respectively for acoustic velocity amplitudes of 10 mm/s and 1 mm/s.     

The identification of tyre induced vehicle interior noise

Sound transmission into a vehicle is classified as either airborne or structure borne sound. From the point view of noise control, the reduction of noise transferred by different paths requires different solutions. Coherence function analysis is often used to identify transmission paths. However it can be difficult to separate the airborne from structure borne components. The principle of acoustic reciprocity offers a convenient method for overcoming this difficulty. The principal states that the transfer function between an acoustic volume velocity source and an acoustic receiver is independent of a reversal of the position of source and receiver. The work done on this study involves exciting a stationary tyre and measuring the surface velocity of the tyre at a number of discrete points. The acoustic transfer functions between each point on the tyre and a receiver point are measured reciprocally. Two sets of measurements are then combined to yield a measure of the sound pressure due to a point force on the tyre via the acoustic transmission path only. This technique also provides information on the relative contributions of various regions of the tyre wall to the resultant noise. Also the sound radiation characteristics, the horn effect, and resonance at the wheel housing are identified through the reciprocal measurement.     

非接触体积测量实验系统

将物体体积参量测量转变成气体压力测量，可以实现体积非接触测量．本文设计了非接触体积测量实验系统，并分析了系统测量的分辨率及精度．     

体育馆声学设计探讨

本文分析了我国综合性体育馆共同的体形特征及其所导致的运用建筑声学时的出现的若干问题，探讨了有关的声学标准，并以工程实践为例，说明必须依靠建筑声学设计和电声设计的结合，才能作好体育馆的声学设计。     

体育馆声学设计探讨

本文分析了我国综合性体育馆共同的体形特征及其所导致的运用建筑本学时出现的若干问题，探讨了有关的声学标准，并以工程实践为例，说明必须依靠建筑产学设计和电声设计的结合，才能作好体育馆的声学设计．     

Acoustic noise simulation and measurement of a gradient insert in a 4 T MRI

High speed switching of current in gradient coils within high magnetic field strength magnetic resonance imaging (MRI) scanners results in high acoustic sound pressure levels (SPL) in and around these machines. Many studies have already been conducted to characterize the sound field in and around MRIs and various methods have been investigated to attenuate the noise generated. In the work presented here a computational vibro-acoustic model was developed based on an iteratively modified and validated finite element (FE) model to characterize the acoustic noise properties of the gradient coil. The simulation results from the computational model were verified through experimental noise measurement for the gradient coil insert in a 4 T MRI scanner by using swept sinusoidal time waveform inputs. Comparisons show that the computational model predicts the noise characteristic properties extremely accurately. There are three dominant frequency bands where the SPL is much higher than those at other frequencies. The SPL in the horizontal direction is much higher than that in the vertical direction due to the excitation to the horizontally placed X coil. The SPL to the inner surface of the coil is higher than far from the inner surface, which proves that the acoustic noise is radiated from the inner surface and primarily caused by the normal vibration of the inner surface. Further verification was conducted by using two types of trapezoidal sequence inputs usually used, which is to simulate real scanning sequences for small animals. Again the accuracy of the developed model is verified. The validated acoustic computational model could be used as an effective method to predict the noise that would be produced by a coil in the design stage. Modification of the structural design or the excitation pulse could be performed to reduce the acoustic noise when the gradient coil is in scanning.     

Adverse Effects of Environmental Noise on Acoustic Voice Quality Measurements

An accurate analysis of voice quality is imperative when using acoustic measurements to diagnose vocal pathologies. It is known that noise has a significant effect on the reliability and validity of acoustic voice measurements, but the precise relationship has not been established. The purpose of this study was to investigate the influence of noise on the accuracy, reliability, and validity of acoustic voice quality measurements while balancing for gender, age, intersubject and intrasubject variability, microphones, computer hardware, analysis software, and type of noise. Level of noise was precisely controlled. The specific focus of interest was to determine the critical levels of noise that can invalidate voice quality measurements and to generate practical recommendations. Results suggest that the recommended, acceptable, and unacceptable levels of noise in the acoustic environment are above 42 dB, above 30 dB, and below 30 dB signal-to-noise ratio, respectively.     

浅海舰船噪声声强流的垂直方向性

浅海环境中,确定性声源的多途声信号干涉使得接收点处声强流的方向发生改变,不再与声源位置处的声强流方向一致。只测量声场的标量声强时,无法得到接收点处声强流的垂直方向性,而基于简正波矢量场建模和仿真,可获得理想条件下宽带点声源激发声场声强流的垂直方向性。本文采用单矢量水听器进行海上实验,获得了海洋环境噪声和干扰条件下舰船噪声声强流的垂直方向性。仿真和实验结果表明:远场条件下,浅海干涉现象引起接收点处声强流的方向(极角)随频率和距离变化,其时间-频率分布呈现与LOFAR谱干涉条纹相似的条纹,声强流的极角值主要分布在70?～110?范围内。