Nonlinear optical properties of a series of azobenzene liquid-crystalline materials

The nonlinear optical properties of a series of azobenzene liquid-crystalline materials, which have different side-chain lengths in their molecular structure from one to another, were investigated using Z-scan method under picosecond pulse laser at 532 nm, 1064 nm and CW 488 nm excitation. The mechanism accounting for the process of nonlinear refraction was discussed under different laser excitations. The polymer films possess very large nonlinear refraction at all the three different laser excitations. Especially, the nonlinear refractive index becomes larger as the length of side-chain, where azobenzene group is contained, increases under pulse excitation at 1064 nm.     

The study on the nonlinear optical response of Sudan I

The nonlinear optical properties of Sudan I were investigated by a single beam Z-scan technique. The Sudan I ethanol solution exhibited large nonlinear refractive indices under both CW and pulse laser excitations. The nonlinear refractive indices of Sudan I were in the order of ?10^?8 cm²/W under CW 633 nm excitation and ?10^?6 cm²/W under CW 488 nm excitation, respectively. Under the excitation of a pulse 532 nm laser, the nonlinear refractive index n₂ was calculated to be 1.19 × 10^?14 cm²/W. It was discussed that the mechanism accounting for the process of nonlinear refraction was attributed to the laser heating for the CW laser excitation and the electronic effect for the pulse excitation. Moreover, the second hyperpolarizability of Sudan I was also estimated in this paper.     

Epitaxial ZnO thin films grown by pulsed electron beam deposition

In this work, the pulsed electron beam deposition method (PED) is evaluated by studying the properties of ZnO thin films grown on c-cut sapphire substrates. The film composition, structure and surface morphology were investigated by means of Rutherford backscattering spectrometry, X-ray diffraction and atomic force microscopy. Optical absorption, resistivity and Hall effect measurements were performed in order to obtain the optical and electronic properties of the ZnO films. By a fine tuning of the deposition conditions, smooth, dense, stoichiometric and textured hexagonal ZnO films were epitaxially grown on (0001) sapphire at 700 °C with a 30° rotation of the ZnO basal plane with respect to the sapphire substrate. The average transmittance of the films reaches 90% in the visible range with an optical band gap of 3.28 eV. Electrical characterization reveals a high density of charge carrier of 3.4 × 10¹⁹ cm^?3 along with a mobility of 11.53 cm²/Vs. The electrical and optical properties are discussed and compared to ZnO thin films prepared by the similar and most well-known pulsed laser deposition method.     

Effect of laser incident energy on the structural,morphological and optical properties of Cu2ZnSnS4 (CZTS) thin films

The polycrystalline Cu₂ZnSnS₄ (CZTS) thin films have been prepared by pulsed laser deposition (PLD) method at room temperature. The laser incident energy was varied from 1.0 at the interval of 0.5–3.0 J/cm². The effect of laser incident energy on the structural, morphological and optical properties of CZTS thin films was studied by means of X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), and optical absorption. The studies reveal that an improvement in the structural, morphological and optical properties of CZTS thin films with increasing laser incident energy up to 2.5 J/cm². However, when the laser incident energy was further increased to 3.0 J/cm², leads to degrade the structural, morphological and optical properties of the CZTS thin films.     

Nonlinear optical properties of CdxZn1 − xO films deposited with PLD technique

In this paper, the structural and optical properties of Cd_xZn_1 ? xO films were studied. The films were deposited with pulse laser deposition (PLD) technique. The Cd concentration changed in the range from x = 0 to 0.2. The structure of the films was characterized by atom force microscope (AFM) and X-ray diffraction (XRD). The nonlinear optical properties were investigated by Z-scan methods. The two-photon absorption (TPA) coefficient β_eff was measured. The β_eff value changes from 49.2 cm/GW to 116.5 cm/GW with the Cd concentration from 0 to 15%.     

Nonlinear optical properties of erbium doped zinc oxide (EZO) thin films

Undoped and Erbium (Er) doped zinc oxide (EZO) thin films were deposited on glass substrate by sol–gel method using spin coating technique with different doping concentration. EZO films were characterized using X-ray diffraction (XRD), Scanning Electron Microscopy (SEM), UV–VIS-NIR transmission and single beam z scan method under illumination of frequency doubled Nd:YAG laser. The deposited films were found to be well crystallized with hexagonal wurtzite structure having a preferential growth orientation along the ZnO (002) plane. A blue-shift was observed in the band gap of EZO films with increasing Er concentration. All the films exhibited a negative value of nonlinear refractive index (n₂) at 532 nm which is attributed to the two photon absorption and weak free carrier absorption. Third order nonlinear optical susceptibility, χ⁽³⁾ values of EZO films were observed in the remarkable range of 10^? 6 esu. EZO (0.4 at.%) sample was found to be the best optical limiter with limiting threshold of 1.95 KJ/cm².     

Diffraction patterns and nonlinear optical properties of gold nanoparticles

Stable gold nanoparticles have been prepared by using soluble starch as both the reducing and stabilizing agents; this reaction was carried out at 40 °C for 5 h. The obtained gold nanoparticles were characterized by UV–Vis absorption spectroscopy, transmission electron microscopy (TEM) and z-scan technique. The size of these nanoparticles was found to be in the range of 12–22 nm as analyzed using transmission electron micrographs. The optical properties of gold nanoparticles have been measured showing the surface plasmon resonance. The second-order nonlinear optical (NLO) properties were investigated by using a continuous-wave (CW) He–Ne laser beam with a wavelength of 632.8 nm at three different incident intensities by means of single beam techniques. The nonlinear refractive indices of gold nanoparticles were obtained from close aperture z-scan in order of 10^?7 cm²/W. Then, they were compared with diffraction patterns observed in far-field. The nonlinear absorption of these nanoparticles was obtained from open aperture z-scan technique. The values of nonlinear absorption coefficient are obtained in order of 10^?1 cm/W.     

Ablation depth control with 40 nm resolution on ITO thin films using a square,flat top beam shaped femtosecond NIR laser

We reported on the ablation depth control with a resolution of 40 nm on indium tin oxide (ITO) thin film using a square beam shaped femtosecond (190 fs) laser (λ_p=1030 nm). A slit is used to make the square, flat top beam shaped from the Gaussian spatial profile of the femtosecond laser. An ablation depth of 40 nm was obtained using the single pulse irradiation at a peak intensity of 2.8 TW/cm². The morphologies of the ablated area were characterized using an optical microscope, atomic force microscope (AFM), and energy dispersive X-ray spectroscopy (EDS). Ablations with square and rectangular types with various sizes were demonstrated on ITO thin film using slits with varying x–y axes. The stereo structure of the ablation with the depth resolution of approximately 40 nm was also fabricated successfully using the irradiation of single pulses with different shaped sizes of femtosecond laser.     

Electron beam irradiation induced changes in the dielectric and electro-optical properties of a room temperature nematic display material 4-(trans-4′-n-hexylcyclohexyl) isothiocyanatobenzoate (6CHBT)

Dielectric and electro-optical studies of a pure and electron beam irradiated liquid crystalline compound 4-(trans-4′-n-hexylcyclohexyl) isothiocyanatobenzoate have been carried out. Dielectric anisotropy, relaxation frequency, activation energy and distribution parameter of an observed non-collective mode corresponding to the molecular rotation about the short axes have been determined as a function of temperature and irradiation dose whereas threshold and switching voltages, splay elastic constant are determined as a function of irradiation dose. The relaxation frequencies initially decrease up to an irradiation dose of 40 kGy but thereafter increase due to irradiation. The activation energies are increased up to irradiation dose of 40 kGy but around 60 kGy dose of irradiation, we found decrease in the activation energy. Electro-optical measurements show the lowering of the threshold voltage with sufficient improvement in the steepness of the transmission voltage curves due to irradiation. The observed changes in the dielectric and electro-optical properties are related with the cis–trans isomerization due to electron beam irradiation.     

Optical parameters of In–Se and In–Se–Te thin amorphous films prepared by pulsed laser deposition

The thin films of materials based on In–Se are under study for their applicability in photovoltaic devices, solid-state batteries and phase-change memories.The amorphous thin films of In₂Se_3−xTe_x (x=0–1.5) and InSe were prepared by pulsed laser deposition method (PLD) using a KrF excimer laser beam (λ=248 nm, 0.5 J cm⁻²) from polycrystalline bulk targets. The compositions of films verified by energy-dispersive X-ray analysis (EDX) were close to the compositions of targets. The surfaces of PLD films containing small amount of droplets were viewed by optical and scanning electron microscopy (SEM).The optical properties (transmittance and reflectance spectra, spectral dependence of index of refraction, optical gap, single-oscillator energy, dispersion energy, dielectric constant) of the films were determined.The values of index of refraction increased with increasing substitution of Te for Se in In₂Se₃ films, the values of the optical gap decreased with increasing substitution of Te for Se in In₂Se₃ films.     

Development of dry polymer electrolyte based on polyethylene oxide with co-bridging agent crosslinked by electron beam

Polyethylene oxide (PEO)-based electrolytes were crosslinked using electron beam (EB) irradiation. The gel contents of a polymer film were increased after irradiation doses of 0, 140, 280, and 420 kGy, with ionic conductivities of 0.831, 1.55, 6.08, and 7.95 (× 10^? 5) S cm^? 1 at 40 °C, respectively. The slight decrease in conductivity at higher temperatures after irradiation is due to the retardation of polymer motion by crosslinking. The electrolyte with higher EB dose amount exhibits higher conductivity due to stabilization of the amorphous state. The EB crosslinking with a co-bridging agent shows enhanced conductivities of 4.71, 6.59, and 7.18 (× 10^? 5) S cm^? 1 at 40 °C, after irradiation with 140, 280, and 420 kGy. Addition of the co-bridging agent is effective for developing a crosslinked structure with a smaller EB dose. Tensile strength becomes two to three times higher with irradiation compared to the non-treated polymer. Combination of the EB technique with a co-bridging agent is a simple and effective method to prepare strong dry polymer electrolyte films with improved room temperature conductivity.     

Femtosecond laser processing of indium-tin-oxide thin films

Micro- and nano-scale crystalline indium-tin-oxide (c-ITO) patterns fabricated from amorphous ITO (a-ITO) thin films on a glass substrate using a (low NA 0.26) femtosecond laser pulse that is not tightly focused are demonstrated. Different types of c-ITO patterns are obtained by controlling the laser pulse energies and pulse repetition rate of a femtosecond laser beam at a wavelength of 1064 nm: periodic micro c-ITO dots with diameters of ~1.4 μm, two parallel c-ITO patterns with/without periodic-like glass nanostructures at a laser scanning path and nano-scale c-ITO line patterns with a line width ~900 nm, i.e. ~1/8 of the focused beam׳s diameter (7 μm at 1/e²).     

Comparison of electrochromic amorphous and crystalline electron beam deposited WO3 thin films

Tungsten oxide (WO₃) thin films were prepared by an electron beam deposition technique. Films were deposited onto fluorine-doped tin oxide (FTO)-coated glass substrates maintained at 523 K. The as-deposited films were found to be amorphous and crystallized after annealing at 673 K. The electrochromic and optical properties, structure, and morphology are strongly dependent on the annealing conditions. Cyclic voltammetry (C-V) was carried out in the potential range −1 to +1 V. Before and after colouration, the films were characterized by measuring transmittance and reflectance. The colouration efficiencies at 630 nm are about 39.4 cm² C⁻¹ and 122.2 cm² C⁻¹ for amorphous and crystalline films, respectively. An investigation of self-bleaching for the coloured film revealed that the film fades gradually over time.     

Nonlinear optical properties of silver colloidal solution by in situ synthesis technique

The silver colloidal solutions were prepared by in situ synthesis technique in the presence of the Polymethyl Methacrylate, which was polymerized by reversible addition-fragmentation transfer. The UV–VIS spectra and transmission electron microscopy had shown the formation of sphere silver nanoparticles with average size of 10 nm. Nonlinear optical properties as a function of silver concentration were studied using Z-scan technique with 13 ns pulse duration at 532 nm. The optical nonlinearity enhancement was observed by increasing the concentration. The third-order nonlinear susceptibility χ⁽³⁾ was measured to 1.045 × 10⁻¹¹ esu when the concentration was 2.13 mg/ml. Besides, the sample was founded to exhibit a shift from saturable absorption to reverse saturable absorption at higher incident laser energy. The reverse saturable absorption was observed to be responsible for the optical limiting characteristics in our experiments.     

Structural and optical studies of electron beam-irradiated Makrofol nuclear track detector

The effect of electron beam irradiation on the structural and optical properties of Makrofol solid state nuclear track detector (SSNTD) was investigated. Samples from Makrofol detector were irradiated with electron beam with doses at levels between 10 and 400 kGy. Structural and optical property studies using X-ray diffraction, FTIR spectroscopy, color difference measurements and electron paramagnetic resonance were performed on non-irradiated and irradiated Makrofol samples. The transmission of these samples in the wavelength range 200–2500 nm, as well as any color changes, was studied. A characteristic absorption bands with different intensities was observed. Using the transmission data, both the tristimulus and the Commission Internationale de l’Eclairage (CIE) LAB coordinate values were calculated. In addition, the color differences between the non-irradiated sample and those irradiated with different doses were calculated. The results indicate that the Makrofol detector is a material that does not have a high resistance to degradation, and its tendency to crosslinking is much lower than that of several other SSNTDs.     

Optical properties of PMN–PT thin films prepared using pulsed laser deposition

(1 ? x)Pb(Mg_1/3Nb_2/3)O₃–xPbTiO₃ (PMN–PT) thin films have been deposited on quartz substrates using pulsed laser deposition (PLD). Crystalline microstructure of the deposited PMN–PT thin films has been investigated with X-ray diffraction (XRD). Optical transmission spectroscopy and Raman spectroscopy are used to characterize optical properties of the deposited PMN–PT thin films. The results show that the PMN–PT thin films of perovskite structure have been formed, and the crystalline and optical properties of the PMN–PT thin films can be improved as increasing the annealing temperature to 750 °C, but further increasing the annealing temperature to 950 °C may lead to a degradation of the crystallinity and the optical properties of the PMN–PT thin films. In addition, a weak second harmonic intensity (SHG) has been observed for the PMN–PT thin film formed at the optimum annealing temperature of 750 °C according to Maker fringe method. All these suggest that the annealing temperature has significant effect on the structural and optical properties of the PMN–PT thin films.     

Nonlinear properties of polyurethane-urea/multi-wall carbon nanotube composite films

The third-order nonlinear optical properties of polyurethane-urea/multiwalled carbon nanotube composites (PU/MWNT) films with different MWNT concentrations are investigated by the use of the Z-scan technique at a wavelength of 532 nm with a pulse duration of 8 ns. The results reveal that the nonlinear refraction and absorption coefficients are linearly dependent on the MWNT concentration. The negative nonlinear refraction effect is validated from the closed-aperture Z-scan measurements. We find that PU/MWNT films are promising nonlinear optical materials, and the nonlinear coefficients can be controlled.     

Influence of γ-irradiation on the optical parameters of 4-tricyanovinyl-N,N-diethylaniline thin films

Thin films of 4-tricyanovinyl-N,N-diethylaniline (TCVA) were prepared by thermal evaporation technique. The spectral and the optical parameters have been investigated by using the spectrophotometric measurements of both transmittance and reflectance at normal incidence of light in the wavelength range 200–2500 nm. The effect of γ-irradiation on the optical parameters was investigated. It was observed that the increase in γ-irradiation dose caused an increase in the value of absorption index and a shift in the spectrum towards higher wavelengths. Therefore, the value of the optical band gap has decreased from 1.45 eV for as-deposited film to 1.39 eV for film exposed to γ-ray dose of 150 kGy and Urbach tail increased. On the other hand, the dispersion parameters of TCVA films were increased with the increase of the irradiation dose.     

Third order nonlinear optical properties of ethyltriphenylphosphonium bis(2-thioxo-1,3-dithiole-4,5-dithiolato)aurate (III)

A novel organometallic compound, ethyltriphenylphosphonium bis(2-thioxo-1,3-dithiole-4,5-dithiolato)aurate (III), abbreviated as TPEPADT, was synthesized. The TPEPADT doped poly(methyl methacrylate) (PMMA) thin film with a mass fraction of 1% (1 wt.%) was prepared by using a spin-coating method. The third-order nonlinear optical properties of TPEPADT in acetonitrile solution and TPEPADT-doped PMMA thin film were investigated by using the laser Z-scan technique at the wavelength 1064 nm with laser duration of 20 ps. The linear refractive index of the polymer thin film was also studied. The Z-scan curves revealed that both TPEPADT in acetonitrile solution and the polymer thin film possessed negative nonlinear refraction, exhibiting a self-defocusing effect and nonlinear absorption was negligible under the experimental conditions used. The nonlinear refractive index was calculated to be ?1.9 × 10^?18 m²/W for TPEPADT in acetonitrile solution and ?8.9 × 10^?15 m²/W for the polymer thin film. These results suggest that TPEPADT have potential for the application of all-optical switching devices.     

Stress and morphological development of CdS and ZnS thin films during the SILAR growth on (1 0 0)GaAs

Cadmium sulfide and zinc sulfide films were grown on (1 0 0)GaAs substrate by successive ionic layer adsorption and reaction (SILAR) technique from aqueous precursor solutions at room temperature and normal pressure. The stress development of the thin films was characterized by laser interferometry as a function of the thickness of the films. The morphology and roughness of the films were monitored by atomic force microscopy. Additionally the crystallinity and crystallite size were analyzed by X-ray diffraction and composition by electron spectroscopy for chemical analysis. The CdS thin films had significantly higher stress level and also better crystallinity compared with ZnS thin films. Both films were polycrystalline and cubic, but the CdS thin films followed the substrate (1 0 0) orientation, whereas the ZnS films were (1 1 1) orientated. The roughness vs. film thickness curves of both films followed each other in shape, but the CdS films consisted of smaller particles.