共查询到20条相似文献,搜索用时 671 毫秒
1.
为了使光学仪器能在恶劣的环境下正常工作,需要对其进行详尽的工程分析。对光机系统的分析方法,包括传统分析方法、集成分析方法和统一分析方法进行了研究,说明了它们的工作原理及实现的具体步骤,分别列举了它们的优缺点。进一步指出在集成分析中热弹性分析需要解决的问题及Zernike多项式拟合中需要注意的问题,归纳了使用统一分析方法时需要特别注意的问题。在比较了3种方法优缺点的基础上,对光机分析方法进行了展望,得出集成分析方法在很长一段时间内将是光机系统分析的主要方法的结论。 相似文献
2.
为了提高对光学仪器中光机结构分析的精度,引入了非线性分析方法,用非线性有限元法研究了某平行光管主镜组件存在的非线性问题。介绍了产生结构非线性的主要来源,并在接触理论的基础上对主反射镜组件进行了合理的有限元建模。采用接触非线性分析方法对螺钉预紧时反射镜的响应及在自重和温度载荷作用下反射镜的变形进行了分析。将线性和非线性分析结果与实际结果进行了对比,结果表明,采用接触非线性分析方法对反射镜组件进行工程分析减小了分析误差。因此,在工程分析中,对某些接触部位采用非线性分析方法可以提高分析精度,得到的结果更加符合实际。 相似文献
3.
X射线光谱现场分析技术是在现场工作条件下对待测目标体中元素进行快速定性和定量分析的仪器分析技术,被广泛应用于一些大型分析仪器和化学分析方法所不能直接应用的领域。该文回顾了近二十年来我国X射线光谱现场分析技术的研究进展。从现场原位分析和现场取样分析两个角度,评述了现场X射线光谱仪的研究进展和主要技术特征;探讨了X射线光谱现场分析数据处理的关键技术问题,概括了X射线仪器谱解析方法的创新性和演变规律;介绍了我国现场X射线光谱分析在地质普查、环境污染调查、文物现场鉴定、合金分析中的重要应用;评价了国际上X射线光谱现场分析仪的研究现状和进展。提出了X射线光谱现场分析技术的研究方向,以期在更多的应用领域得到长足发展。 相似文献
4.
辉光放电光谱分析技术在金属材料分析中的应用 总被引:5,自引:0,他引:5
本文主要介绍了辉光放电光谱仪的基本原理,分析特点以及在金属材料分析中的应用,并从理论上推导出辉光放电光谱分析技术用于金属材料分析的理论依据。着重介绍了基板分析、深度逐层分析。对磷青铜镀银层逐层分析;渗碳、氮钢板分析;彩涂钢板分析进行了探讨。 相似文献
5.
�� �����ν������� ������־������ ˧ 《核聚变与等离子体物理》2006,38(4):466-472
Helium cooled ceramic breeder test blanket module (HCCB TBM) was introduced. The TBM system is mainly composed of test blanket, helium coolant system, tritium extraction system, coolant purification system, tritium measurement system and neutron activation system. The structural safety analysis of TBM mainly includes electromagnetic safety analysis, thermal-hydraulic safety analysis and neutronics safety analysis. The material safety analysis of TBM is divided into safety analysis of structural material, safety analysis of functional materials, such as tritium permeation barrier and tritium treatment materials. The research progress made by scholars at home and abroad in the above-mentioned security analysis research work was summarized, and the future safety analysis of the TBM tritium system was looked forward to, with a view to providing reference for the safety design of tritium systems. 相似文献
6.
ANSYS在低温压力容器应力分析与优化设计中的应用 总被引:7,自引:0,他引:7
介绍了大型有限元软件ANSYS在低温压力容器典型应力分析(不连续区局部应力分析、热应力分析、接触应力分析、复合材料应力分析)与优化设计中的应用,论证了ANSYS作为低温压力容器应力分析与优化设计有效手段的实用性和可靠性,为低温压力容器的应力分析和优化设计找到了一条新途径。 相似文献
7.
介绍了氦冷固态增殖实验包层(HCCB TBM)系统,该系统主要由TBM 包层、氦冷却系统、氚提取系统、冷却剂净化系统、氚计量系统和中子活化系统等组成。TBM 结构安全分析主要包括电磁安全分析、热工水力安全分析和中子学安全分析,TBM 材料安全分析主要包括结构材料安全分析、阻氚涂层和氚处理等功能材料安全分析。对国内外学者在上述安全分析研究工作中取得的研究进展进行综述,并对TBM 未来的安全分析工作进行展望,以期对其安全设计提供参考。 相似文献
8.
9.
10.
11.
Xu Wang 《Journal of sound and vibration》2011,330(20):4827-4850
The purpose of this paper is to develop an efficient approach for vibro-acoustic analysis. Being simple and representative, an exited plate-acoustic system is selected as a validation case for the vibro-acoustic analysis as the system presents one two-dimensional statistical component (modal dense structure panel—plate) connected to the other component (deterministic acoustic volume—cavity) through the area junction over a surface domain, rather than at a line boundary. Potential industrial applications of the system vibro-acoustic analysis would be in acoustic modelling of vehicle body panels such as the cabin roof panel, and door panels for the boom noise analysis.A new deterministic-statistical analysis approach is proposed from a combination or hybrid of deterministic analysis and statistical energy analysis (SEA) approaches. General theory of the new deterministic-statistical analysis approach is introduced. The main advantage of the new deterministic-statistical analysis approach is its possibility in place of the time consuming Monte Carlo simulation. In order to illustrate and validate the new deterministic-statistical analysis approach, three approaches of the deterministic analysis, the statistical energy analysis and the new deterministic-statistical analysis are then applied to conduct the plate-acoustic system modelling, and their results will be compared. The vibro-acoustic energy coupling characteristic of the plate-acoustic system will be studied. The most suitable frequency range for the new approach will be identified in consideration of computational accuracy, information and speed. 相似文献
12.
在水稻雄性不育系花粉细胞败育程度鉴定方法上,传统的单纯显微图像分析方法或纯光谱分析方法存在定性、定位、定量和定时四位一体分析能力不足的问题.本文在普通荧光显微镜的基础上,研制出一种基于LCTF(Liquid Crystal Tunable Filter,液晶可调谐滤光器)的显微光谱成像分析系统,并将其引入到水稻花粉发育过程中的细胞学定量研究,初步建立起一套针对水稻花粉透射光光谱图像分析和荧光光谱图像分析新方法.与传统的纯光谱或纯图像分析方法相比,本分析方法具有独特的定性、定量、定位和定时四位一体的分析能力,其对水稻雄性不育系花粉败育程度的鉴定将更为准确.本方法对于其它植物和动物细胞的定量分析同样具有借鉴和推广意义. 相似文献
13.
研究了影响钢中铝分析的因素,从试样制备、分析曲线的调整以及分析各个环节,进行了分析探讨,总结出低铝分析的特点,对炼钢生产有重要指导作用. 相似文献
14.
15.
Comparison of automated and visual texture analysis in MRI: characterization of normal and diseased skeletal muscle 总被引:1,自引:0,他引:1
Herlidou S Rolland Y Bansard JY Le Rumeur E de Certaines JD 《Magnetic resonance imaging》1999,17(9):1393-1397
Automated magnetic resonance imaging (MRI) texture analysis was compared with visual MRI analysis for the diagnosis of skeletal muscle dystrophy in 14 healthy and 17 diseased subjects. MRI texture analysis was performed on 8 muscle regions of interest (ROI) using four statistical methods (histogram, co-occurrence matrix, gradient matrix, runlength matrix) and one structural (mathematical morphology) method. Nine senior radiologists assessed full leg transverse slice images and proposed a diagnosis. The 59 extracted texture parameters for each ROI were statistically analyzed by Correspondence Factorial Analysis. Non-parametric tests were used to compare diagnoses based on automated texture analysis and visual analysis. Texture analysis methods discriminated between healthy volunteers and patients with a sensitivity of 70%, and a specificity of 86%. Comparison with visual analysis of MR images suggests that texture analysis can provide useful information contributing to the diagnosis of skeletal muscle disease. 相似文献
16.
17.
传统Prony法在分析低频振荡时对输入信号要求较高,存在着对噪声敏感的弱点.因此提出一种经验模态分解滤波和改进Prony法相结合的低频振荡分析方法.该方法先用经验模态分解对低频振荡信号进行自适应滤波,再用改进Prony法对滤波后的信号进行分析.其中,改进Prony法有效阶数用归一化奇异值法确定.将该方法分别用于分析试验信号和IEEE 4机系统振荡信号,并与基于低通滤波器的Prony分析进行比较.结果表明,在较大噪声环境下,该方法仍然能相对准确的辨识出低频振荡主导模式,验证了其有效性.
关键词:
低频振荡
经验模态分解
改进Prony法
归一化奇异值法 相似文献
18.
在强度静力分析基础上,对S弯盒壁厚、加强筋间距等参数进行了优化设计和校核。在模态分析基础上,对模型进行了频谱分析和动态时程分析,获得地震动下确保结构安全运行的设计参数。 相似文献
19.
20.
Results of the wavelet analysis of an extremely short femtosecond pulse propagating in a single-mode optical fiber with a
shifted dispersion characteristic are described. The advantages of wavelet analysis as compared with Wigner analysis are shown.
In particular, wavelet analysis allows improving the spectral resolution of the studied pulse in the high-frequency range. 相似文献