溶胶-凝胶法制备的高压电常数（Bi0.5Na0.5）1－xBaxTiO3系无铅压电陶瓷

测量了使用溶胶-凝胶工艺制备的(Bi0.5Na0.5)1-xBaxTiO3(x=0.00，0.04，0.06，0.08,0.12)系陶瓷的介电、压电、铁电和热释电性能.由于使用了溶胶-凝胶工艺制备的粉料，因此所有样品的压电性能都得到了较大提高.其中(Bi0.5Na0.5)0.94Ba0.06TiO.3系陶瓷具有该系列最大的压电常数，d33=173×10-12C/N，与传统工艺相比，d33提高了近40%.同时，在一定范围内，随Ba含量的增加，材料的剩余极化Pr和矫顽场Ec逐渐减小，退极化温度逐渐降低.对于(Bi0.5Na0.5)0.94Ba0.06TiO.3系陶瓷，剩余极化和矫顽场分别为25μC/cm2和28kV/cm，退极化温度约为80℃. 关键词： 溶胶-凝胶 压电常数 剩余极化 矫顽场     

(Bi0.5Na0.5)TiO3-Ba(Ti,Zr)O3 陶瓷的电性能研究

采用氧化固相法制备了(1-x)(Bi0.5Na0.5)TiO3-xBa(Ti0.95Zr0.05)O3(BNT-BZT)陶瓷,其中掺入量x的值分别为0,0.04,0.05,0.06,0.07.研究了BNT-BZT体系陶瓷的准同型相界以及陶瓷材料的微观结构和性能之间的关系,并探讨了陶瓷的介电性能和铁电等性能.通过探究Ba(Ti,Zr)O3(BZT)掺杂量对BNT 各性能的影响得出了当掺杂量x=0.05得到结构较为致密,介电,铁电性能较好的样本,对工业化研究和生产有重要的意义     

(La1-xCex)2/3Ca1/3MnO3体系的输运性质和反常磁特性研究

本文报告了对Ce掺杂锰氧化物(La1-xCex)2/3Ca1/3MnO3 (x=0～1.0)系列样品的输运特性和反常磁特性的研究结果.实验表明,Ce掺杂对Tc有明显的抑制作用,整体上电阻率随Ce掺杂含量增加而上升,在外加磁场时表现出极大的磁电阻效应.磁化强度随温度变化的曲线出现了两个转变,高温处对应于Mn离子磁矩的铁磁金属转变,低温处的转变则对应于Ce离子磁矩自旋有序排列的形成.表明Ce掺杂引起样品中铁磁双交换作用和反铁磁超交换作用之间的竞争,Ce离子与Mn离子有很强的相互作用.随Ce掺杂含量的增加,铁磁有序转变温度下降,而反铁磁有序转变温度则向高温处移动,铁磁区域明显减小.     

溶胶-凝胶法制备Bi0.5Na0.5TiO3陶瓷及其电学特性

用溶胶-凝胶工艺成功制备出Bi05Na05TiO3纳米微粉，并利用此微粉烧结出高致密度的Bi05Na05TiO3陶瓷.这种新工艺制备的Bi05Na05TiO3陶瓷，其压电性能远远高于普通方法制备的陶瓷，其中压电常数d33和机电耦合系数kt分别高达102×10-12C/N和58%.同时发现，对于这种Bi05Na05TiO3陶瓷，室温时只需施加100kV/cm左右的交变电场，就可得到矩形度极好的饱和回线，得到的剩余极化Pr和矫顽场Ec分别为32μC/cm2和61kV/cm.而在100℃以上只需施加35kV/cm的极化电场就可使样品充分极化.     

非化学计量和掺杂对(Na_(1/2)Bi_(1/2))_(0.92)Ba_(0.08)TiO_3陶瓷电性能的影响

研究了非化学计量和掺杂对无铅压电陶瓷 (Na1 2 Bi1 2 ) 0 .92 Ba0 .0 8TiO3的压电性能及去极化温度的影响 .研究发现A位非化学计量可以提高陶瓷的压电性能 ;B位掺杂对材料电学性能的影响规律类似于Pb(Ti,Zr)O3系压电陶瓷的相关规律 ;由于非化学计量和掺杂会影响到A位离子对B位离子与氧离子形成的BO6 八面体的耦合作用 ,影响到畴的稳定性 ,从而影响到 (Na1 2 Bi1 2 ) 0 .92 Ba0 .0 8TiO3陶瓷的去极化温度 ;所研究的陶瓷样品的去极化温度越低 ,压电系数越高 .     

(1-x)(K0.5Na0.5)NbO3-xSrTiO3陶瓷的弛豫铁电性能

通过对(1-x)(K0.5Na0.5)NbO3-xSrTiO3(0≤x≤0.15)陶瓷的相组成、晶体结构和介电性能的研究发现,该陶瓷为单一的钙钛矿结构相.当x含量较小(x＜0.1)时为正交相结构,x≥0.1时转变为四方相结构.随着SrTiO3掺杂量的增加,样品的致密度增加,样品由正常铁电相逐渐向弥散铁电相转变,且相变温度明显下降,其相变峰的半高宽D和临界指数γ,随 x 的增加而增加.样品损耗ε″r(复介电常数虚部)随温度T的变化表明低温时弛豫极化损耗起主要作用,高温时漏导损耗起主要作用.同时介电常数实部ε′r随频率的变化显示(1-x)(K0.5Na0.5)NbO3-xSrTiO3弛豫为德拜弛豫.     

相分离Eu0.5Sr0.5MnO3体系中的场诱导磁相变及输运特性研究

研究了半掺杂相分离锰氧化物Eu_0.5Sr_0.5MnO₃样品的结构和电磁输运特性.在半掺杂情况下,该样品呈O′型正交结构,表明样品存在典型的Jahn-Teller畸变;在75 K附近样品的顺磁/反铁磁背景中开始出现铁磁相,在更低的温度42 K,4000 A/m磁场下M-T的场冷曲线和零场冷曲线出现明显分岔,样品的交流磁化率实部随温度的变化曲线中也在42 K观察到尖峰的出现,表现出团簇玻璃行为.在无外加磁场下该样品在 关键词： 多相竞争 半掺杂 铁磁团簇     

Ba2+掺杂钙钛矿Bi0.5Ca0.5MnO3多晶材料的结构、磁性和输运性质研究

本文系统地研究了具有电荷有序(CO)和C型反铁磁(AFM)磁结构的钙钛矿锰氧化物Bi0.5Ca0.5-xBaxMnO3(x=0,0.03,0.05,0.07 and 0.10)的结构、磁性和电输运性质.系统晶格对称性保持Pnma空间群正交结构不变.随着Ba掺杂浓度的提高,电荷有序转变温度和反铁磁转变温度明显降低,表明掺...     

脱氧La0.5Ca0.5MnO3样品的铁磁-反铁磁转变和电阻率变化

研究了氧空位对La_0.5Ca_0.5MnO₃ （LCMO）多晶块材的电输运和磁性质的影响. 随着氧空位的增加, 样品在高温段的电阻率一直增加, 并满足绝热小极化子模型, 而低温段的电阻率先下降后上升, 并出现明显的dR/dT>0的行为, 直至最后变为绝缘的. 氧空位的增加抑止了反铁磁相的出现, 使得脱氧的LCMO样品不发生反铁磁转变, 进一步增加氧空位则会抑制铁磁相. 关键词： 0.5Ca_0.5MnO₃')" href="#">La_0.5Ca_0.5MnO₃ 反铁磁相变 铁磁相变 脱氧     

(1-x)(K0.5Na0.5)NbO3-xSrTiO3陶瓷的弛豫铁电性能

通过对（1-x）（K_0.5Na_0.5）NbO₃-xSrTiO₃（0≤x≤0.15）陶瓷的相组成、晶体结构和介电性能的研究发现,该陶瓷为单一的钙钛矿结构相.当x含量较小（x＜0.1）时为正交相结构,x≥0.1时转变为四方相结构.随着SrTiO₃掺杂量的增加,样品的致密度增加,样品由正常铁电相逐渐向弥散铁电相转变,且相 关键词： 弛豫铁电体 0.5Na_0.5）NbO₃铁电陶瓷')" href="#">（K_0.5Na_0.5）NbO₃铁电陶瓷 3掺杂')" href="#">SrTiO₃掺杂 相变温度     

Pr含量对Bi_5Fe_(0.5)Co_(0.5)Ti_3O_(15)室温多铁性的影响

采用改良的固相烧结工艺制备了Bi5-xPrxFe0.5Co0.5Ti3O15(BPFCT-x,x=0.25,0.50,0.75,0.80)陶瓷样品.X射线衍射结构分析表明:镨(Pr)含量对样品微观结构产生了影响,但所有样品均为层状钙钛矿结构;BPFCT-x样品的剩余极化强度(2Pr)随着掺杂量的增加呈现出先增大后减小的变化趋势,当Pr含量为0.75时,样品的2Pr达到最大值,为6.43μC/cm2.样品的磁性与铁电性能具有相同的变化规律,室温下样品的剩余磁化强度(2Mr)也呈现出先增大后减小的趋势,并且也在x=0.75时达到最大为0.097 emu/g.随着Pr掺杂量增大,样品的室温下铁电和铁磁性能得到明显改善,并且当掺杂量为0.75时,样品室温多铁性最好.Pr掺杂降低了样品中的缺陷浓度,从而提高了样品铁电畴动性,这有助于提高样品铁电性能.而样品铁磁性能的改善可能与Pr对样品晶格畸变产生的影响有关.     

A comparative study of magnetic and dielectric behaviors for La(1-x)Bi(x)Mn(1-y)Fe(y)O3 series (with x = 0.5, 0.7 and y = 0.3, 0.7)

We have carried out an extensive investigation into the effect of doping on both the A- and B-sites for the multiferroic La(0.5)Bi(0.5)Mn(0.5)Fe(0.5)O(3) in relation to its physical properties. The temperature dependent magnetization and dielectric response are determined for different percentages of Bi- and Fe-substitutions. For La(0.5)Bi(0.5)Mn(0.7)Fe(0.3)O(3), there is a prominent ferromagnetic transition T(C) around 110 K, whereas the other La(0.5)Bi(0.5)Mn(0.3)Fe(0.7)O(3) and La(0.3)Bi(0.7)Mn(0.3)Fe(0.7)O(3) phases fail to exhibit any clear transition. On the other hand, for the Fe-rich phases, the coercive field increases to 2450 Oe compared to 1720 Oe (for the Mn-rich phase). All the compositions exhibit coexistence of ferromagnetic and antiferromagnetic phases at low temperatures. The temperature dependent dielectric constant of the investigated samples varies from 32,000 to 500 at room temperature and the data has been analyzed using the universal dielectric response model.     

Glassy-ferromagnetic behavior in Eu0.5Sr0.5CoO3

Polycrystalline perovskite cobalt oxide Eu_0.5Sr_0.5CoO₃ was prepared by the conventional solid-state reaction method. X-ray powder patterns indicated the prepared samples are pure, cubic perovskite structure (Pm3?m), and with no evidence of any secondary phases. The dc magnetization and ac susceptibility measurements were carried out to investigate the magnetic properties of the sample, and which indicated that cluster-glasses properties are suppressed with the increasing of the coercive field. We denied the possibility of spin-glasses and the existence of the Hopkinson effect in Eu_0.5Sr_0.5CoO₃ through the temperature-dependent ac susceptibility measurements, and explained the magnetic behavior of Eu_0.5Sr_0.5CoO₃ with the competition between magnetic anisotropy and the external magnetic field.     

Effect of grain size on the magnetic properties of superparamagnetic Ni0.5Zn0.5Fe2O4 nanoparticles by co-precipitation process

Ni_0.5Zn_0.5Fe₂O₄ (NZFO) spinel-type nanoparticles were directly fabricated by the chemical co-precipitation process using metal nitrate and acetate as precursors since nitrogen and carbon would be taken away in the forms of oxynitride and oxycarbide, respectively, after the precursors were annealed and then investigated in detail by employing X-ray diffraction (XRD), magnetic measurement and Raman spectroscopy. XRD analysis indicates that the as-prepared nanocrystals are all of a pure cubic spinel structure with their sizes ranging from 20.8 to 53.3 nm, as well as peaks of some samples shifting to lower angles due to lattice expansion. Calculations from the derived XRD data indicate that the activation energy is 30.83 kJ/mol. The magnetic measurements show that these samples are superparamagnetic. The saturation magnetization increases with annealing temperature, which may be explained by super-exchange interactions of Fe ions occurring at A- and B-sites. The variation of coercivity with particle size is interpreted on the basis of domain structure and crystal anisotropy. Furthermore, these nanoparticles exhibit a redshift phenomenon at lower temperatures seen in the Raman spectra, which could be related to ionic substitution.     

SrMn0.5Fe0.5O3的自旋玻璃态和过渡金属离子价态的研究

采用固相反应法制备了SrMn_0.5Fe_0.5O₃陶瓷样品,并对样品的晶体结构,磁性和离子价态进行了系统的表征与分析. X射线衍射谱的Rietveld拟合表明样品属于理想的立方钙钛矿型结构,Mn离子和Fe离子随机占据B位的O八面体中心. X射线光电子能谱表明Mn离子为+3和+4的混合原子价态,Fe离子为+3价. 样品在大于230K的高温区域呈现Curie顺磁特性,在小于230 K的低温区域样品表现出自旋玻璃态行为,这种特性源于Mn离子和Fe离子之间的交换作用及自身价态和分布的不均匀性. 由于Fe³⁺离子占据O八面体的中心,对顺磁区的Mssbauer谱测量表现为四级分裂. 关键词： 晶体结构 价态 顺磁 自旋玻璃态     

The unusual magnetic and electronic properties of Gd0.5Ba0.5CoO2.9

Magnetic and electrical properties of well-characterized Gd_0.5Ba_0.5CoO_2.9 have been studied carefully in order to compare them with those of other analogous cobaltates of the type Ln_0.5A_0.5CoO₃ (Ln=La, Nd and A=Sr, Ba) which are ferromagnetic. The results show that Gd_0.5Ba_0.5CoO_2.9, which has A-site cation ordering at room temperature, does not become a genuine ferromagnet at low temperatures, but the ferromagnetic interactions observed at 280 K give over to an antiferromagnetic (AFM) state on cooling to 230 K. The AFM state is rendered ferromagnetic on the application of high magnetic fields. The properties can be understood on the basis of phase separation induced by the large A-site cation-disorder, arising from the size mismatch.