Photo-decomposition of thin palladium acetate films with 126 nm radiation

2 O₃, AlN and Si substrates produced by vacuum ultraviolet induced decomposition of palladium acetate is described. The palladium films formed and the palladium acetate layers used were characterised by using ultraviolet spectrophotometry and Fourier transform infrared (FTIR) spectroscopy. The optical transmission of the films after irradiation with pseudo-continuous 126 nm radiation generated by an excimer lamp provided information about the decomposition rate at different pressures and exposure times. The FTIR spectra recorded the chemical changes of the C=O, COO^- and CH₃ groups at different exposure times. The decomposition mechanism of the palladium acetate under these conditions appears to be quite different to that induced by pulsed laser irradiation. Received: 25 November 1996/Accepted: 1 July 1997     

A luminescent dinuclear Eu(III) complex based on 2,8-bis(4′,4′,4′,-trifluoro-1′,3′-dioxobutyl)-dibenzothiophene for light-emitting diodes

A dinuclear Eu (III) complex Eu₂(dbt)₃·4H₂O was synthesized, where H₂dbt was 2,8-bis(4′,4′,4′,-trifluoro-1′,3′-dioxobutyl)-dibenzothiophene. The complex emits the characteristic red luminescence of Eu³⁺ ion due to the ⁵D₀→⁷F_J(J=0-4) transitions under 395 nm-light excitation with a luminescent quantum efficiency of 17%. The complex is thermally stable up to 280 °C. It was found that the complex can be effectively excited by a 395 nm-emitting InGaN chip. Bright red light was obtained using the complex as light color-conversion material.     

Synthesis and characterization of titania-based monodisperse fluorescent europium nanoparticles for biolabeling

Inorganic-organic hybrid titania-based nanoparticles covalently bound to a fluorescent Eu³⁺ chelate of 4,4′-bis(1′′,1′′,1′′,2′′,2′′,3′′,3′′-heptafluoro-4′′,6′′-hexanedion-6′′-yl)chlorosulfo-o-terphenyl (BHHCT-Eu³⁺) were synthesized by a sol-gel technique. A conjugate of BHHCT with 3-[2-(2-aminoethylamino) ethylamino]propyl-trimethoxysilane (APTS) was used as a precursor for the nanoparticle preparation and monodisperse nanoparticles consisting of titania network and silica sub-network covalently bound to the Eu³⁺ chelate were prepared by the copolymerization of APTS-BHHCT conjugate, titanium tetraisopropoxide (TTIP) and free APTS in EuCl₃ water-alcohol solution. The effects of reaction conditions on size and fluorescence lifetime of the nanoparticles were investigated. The characterizations by transmission electron microscopy and fluorometric methods indicate that the nanoparticles are near spherical and strongly fluorescent having a fluorescence quantum yield of 11.6% and a long fluorescence lifetime of ∼0.4 ms. The direct-introduced amino groups on the nanoparticle's surface by using free APTS in nanoparticle preparation facilitated the biolabeling process of the nanoparticles. The nanoparticle-labeled streptavidin (SA) was prepared and used in a sandwich-type time-resolved fluoroimmunoassay (TR-FIA) of human prostate-specific antigen (PSA) by using a 96-well microtiter plate as the solid phase carrier. The method gives a detection limit of 66 pg/ml for the PSA assay.     

Synthesis of a Au‐on‐Pd Heteronanostructure Stabilized by Citrate and its Catalytic Application

The preparation of Au‐on‐Pd heteronanostructure (HNS) using citrate‐stabilized polycrystalline Pd nanoparticles (NPs) as the seeds is described. The resulting Au‐on‐Pd HNS is characterized and it is found that the formation of Au‐on‐Pd HNS depends greatly on a ratio between Pd seeds and AuCl₄^? ions added and the optimal molar ratio is 10:1. If fewer AuCl₄^? ions are added (Pd/Au ratio is 100:1), the growth of Au NPs only occurs on part of the Pd seeds’ surface. The addition of more AuCl₄^? ions (Pd/Au ratio is 5:1) hinders the growth of Au NPs on the Pd seeds’ surface. To demonstrate the catalytic performance, the electrochemistry oxidation of ethanol and the reduction of p‐nitrophenol by NaBH₄ are chosen to examine the catalytic activity of Au‐on‐Pd HNS. Pd seeds, Au NPs, and poly(vinyl pyrrolidone) (PVP)‐stabilized PdAu nanoalloy are used as the references for comparison. In the first reaction, the catalytic reactivity of Au‐on‐Pd HNS is better than that of corresponding pure Pd or Au NPs, while the opposite occurs for the latter reaction. The catalytic activity of Au‐on‐Pd HNS is much higher than that of PVP‐stabilized PdAu nanoalloy.     

Nano-powders of Na0.5K0.5NbO3 made by a sol–gel method

Sodium potassium niobate (NKN) nano-particle powders were synthesised through the thermal decomposition of a sol–gel NKN precursor. Powders and gels were characterised by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA) and transmission electron microscopy (TEM). Hydrated carbonate phases formed as a result of reaction with evolved vapours during organic decomposition, and by reaction of NKN powders with H₂O and CO₂ on exposure to air. The primary particle size of the powders increased from <50 to <250 nm as decomposition temperatures were raised from 500 to 950 °C.     

Vertical phase separation in spin-coated films of a low bandgap polyfluorene/PCBM blend—Effects of specific substrate interaction

We report on the effect of the substrate on the vertical phase separation in spin-coated thin films of poly[(9,9-dioctylfluorenyl-2,7-diyl)-co-5,5-4′,7′-di-2-thienyl-2′,1′,3′-benzothiadiazole] (APFO-3) blended with [6,6]-phenyl-C₆₁-butyric acid methyl ester (PCBM). Compositional depth profiles of the films are measured by dynamic secondary ion mass spectrometry (SIMS). We found that changing the substrate from silicon to gold affects the composition profile near the substrate interface. This is caused by a specific interaction between the polymer (APFO-3) and the gold surface, as confirmed by X-ray photoelectron spectroscopy (XPS). The composition profile in the area away from the substrate interface, as well as the enrichment of the free surface with APFO-3, remain however unaffected by the choice of substrate. The vertical composition was also analysed for APFO-3:PCBM films spin-coated on indium tin oxide (ITO) coated with a thin layer of (3,4-ethylenedioxythiophene) poly(styrenesulfonate) (PEDOT:PSS).     

Modification of the organic/La0.7Sr0.3MnO3 interface by in situ gas treatment

La_0.7Sr_0.3MnO₃ (LSMO) can act as a spin injection electrode in organic spin-valves and organic light-emitting devices. For the latter application, good control of the electronic structure of the organic/LSMO interface is a key issue to ensure sufficient current injection in the device. By exposing cleaned LSMO surfaces to activated oxygen and hydrogen, the work function of the samples can reach 5.15 and 4.3 eV, respectively, as shown by in situ photoemission measurements. The initial stage of formation of the organic/LSMO interface upon deposition of N,N′-bis-(1-naphyl)-N,N′-diphenyl-1,1′-biphenyl-4,4′-diamine (NPB) onto the oxygen-treated LSMO surface is examined. We find that the NPB molecules evenly cover the LSMO surface and that the interface barrier height is 0.8 eV, which is comparable to that at the NPB/indium tin oxide (ITO) interface with the ITO surface pretreated in situ by oxygen plasma.     

Color-tunable organic light-emitting devices using a thin N,N′-bis-(1-naphthyl)-N,N′-diphenyl-1,1′-biphenyl-4,4′-diamine layer at heterojunction interface

Novel types of multilayer color-tunable organic light-emitting devices (OLEDs) with the structure of indium tin oxide (ITO)/N,N′-bis-(1-naphthyl)-N,N′-diphenyl-1,1′-biphenyl-4,4′-diamine (NPB)/aluminum (III)bis(2-methyl-8-quinolinato)4-phenylphenolato (BAlq)/tris-(8-hydroxyquinolate)-aluminum (Alq₃)/Mg:Ag were fabricated. By inserting a thin layer with different thickness of a second NPB layer at the heterojunction interface of BAlq/Alq₃, the emission zone of devices shifted greatly and optoelectronic characteristics underwent large variation. Although BAlq was reported as a very good hole-blocking and blue-light-emission material, results of measurements in this paper suggested that a certain thickness of NPB layer between BAlq and Alq₃ plays an important role to modify device characteristics, which can act as recombination-controlling layer in the multilayer devices. It also provides a simple way to fabricate color-tunable OLEDs by just changing the thickness of this “recombination-controlling” layer rather than doping by co-evaporation.     

The influence of exciton behavior on luminescent characteristics of organic light-emitting diodes

We used N,N′-bis-(1-naphthyl)-N,N′-1-diphenyl-1,1′-biphenyl-4,4′-diamine (NPB), 4,4′-N,N′-dicarbazole-biphenyl (CBP) and tris(8-hydroxyquinoline) aluminum (Alq₃) to fabricate tri-layer electroluminescent (EL) device (device structure: ITO/NPB/CBP/Alq₃/Al). In photoluminescence (PL) spectra of this device, the emission from NPB shifted to shorter wavelength accompanying with the decrease of its emission intensity and moreover the emission intensity of Alq₃ increased relatively with the increase of reverse bias voltage. The blue-shifted emission and the decrease in emission intensity of NPB were attributed to the polarization and dissociation of NPB excitons under reverse bias voltage. The increase of emission intensity of Alq₃ benefited from the recombination of electrons (produced by the dissociation of NPB exciton) and holes (injected from the Al cathode).     

Diffusion study of multi-organic layers in OLEDs by ToF-SIMS

A model organic light-emitting diodes (OLEDs) with structure of tris(8-hydroxyquinoline) aluminum (Alq₃)/N,N′-diphenyl-N,N′-bis[1-naphthy-(1,1′-diphenyl)]-4,4′-diamine (NPB)/indium tin oxide (ITO)-coated glass was fabricated for diffusion study by ToF-SIMS. The results demonstrate that ToF-SIMS is capable of delineating the structure of multi-organic layers in OLEDs and providing specific molecular information to aid deciphering the diffusion phenomena. Upon heat treatment, the solidity or hardness of the device was reduced. Complicated chemical reaction might occur at the NPB/ITO interface and results in the formation of a buffer layer, which terminates the upper diffusion of ions from underlying ITO.