参考光波面质量对全息存储质量影响的数值模拟研究

采用数值模拟方法研究了不同种类参考光波面质量对再现图像质量的影响.针对全息实验实际情况,对二值图像建立了傅里叶变换全息图记录和读出的物理模型,分别考察采用一般平面波参考光、高斯光束球面波参考光和散斑参考光时的读出图像质量,并以信噪比损失作为衡量图像质量的定量工具.模拟结果表明,在理想平面波参考光和球面波参考光的情形,全息读出图像质量非常好,与输入图像相比信噪比损失在0.6dB以下.但是对于散斑参考光,尽管其极优的位移选择性提供了高密度存储的可能性,但再现图像质量明显变差,信噪比损失在5dB以上,实现有效的数据存储位密度将是十分困难的.为了兼顾存储密度和再现质量,应该考虑优化参考光的途径.     

无透镜傅里叶变换全息图数值再现中的图像处理

针对无透镜傅里叶变换全息图数值再现过程的特点，提出了一套不同于以往的削弱或消除全息图0级衍射和孪生像的数字图像处理算法。该算法分为三步。首先，对所拍摄的数字全息图通过高通滤波实现衬比度增强预处理，以提高全息图的衍射效率并消除再现图像的0级衍射斑；其次，对再现图像进行带通及Ⅴ型滤波，以降低背景噪声并使再现视场均匀；最后，对所得到的再现像进行平滑处理，通过小波滤噪和中值滤波进一步提高再现像的信噪比。实验结果表明，该方法只需记录一幅数字全息图，通过简单的数字图像处理，便可明显改善图像质量，尤其适用于无透镜傅里叶变换全息图的数值再现，并且更加实用化。     

基于DMD的数字全息显示及其再现像质增强

采用DMD作为空间光调制器构建了一套数字全息显示系统.分析了数字全息图光学再现中影响再现图像质量的因素,提出了一种采用频域滤波重建高条纹对比度滤波全息图来改善其光学再现图像质量的新方法.采用信噪比及图像亮度作为评价参量,对原始全息图和滤波全息图的数值再现像进行定量分析表明,滤波后全息图的再现像质量明显优于原始全息图的再现像.基于DMD数字全息显示系统的光学再现实验也验证了理论分析结果.     

应用波分复用技术实现飞秒级超快动态过程的脉冲数字显微全息记录

采用波分复用方法实现飞秒级超快动态过程的脉冲数字显微全息记录和再现。在全息记录过程中,利用BBO倍频晶体对入射激光进行倍频,将基波和谐波分光,并经时间延迟后进入迈克耳孙干涉仪,从而可应用波分复用技术,先后在CCD的一帧图像上记录两张具有不同空间频率的子全息图。采用这种方法,实现了对单脉冲飞秒激光激发空气电离的超快动态过程的全息记录,并通过数字傅里叶变换和数字滤波的方法,分别再现出每张子全息图记录的波前,从而获得了具有飞秒时间分辨的空气等离子体形成和传播过程的动态振幅和相位图像,其单次曝光时间为50 fs,曝光时间间隔为400 fs,相应的曝光频率约为2.5×1012f/s。     

粒子场相移全息术

本文利用相移全息术记录的双曝光粒子场全息图,以改进再现图像的SNR、分辨率和对比度。并发展了这种技术的理论,讨论了相移的引入方法,给出了实验结果,与通常的同轴和离轴双曝光结果进行了比较。     

利用付里叶变换全息图进行高速全息分幅摄影

本文叙述了一种高速全息摄影分幅的新方法——利用付立叶变换全息图,对瞬变物体用透射式拍摄了它的动态全息图,在0.5毫秒内拍摄了10幅透射阴影全息图,每幅的曝光时间为25ns,分别记录在记录介质的不同部位,再现时,单独分别再现。文中不但叙述了此方法的原理,而且介绍了它的实验装置和实验结果。     

可分离再现的双脉冲曝光全息图

本文提出一种可以分别再现双脉冲曝光粒子场全息图的两幅图像的技术,记录全息图时,利用电光晶体和偏振分光棱镜,使两个光脉冲的物光波或参考光波沿不同的空间路径到达全息底板,从而通过不同的空间滤波在再现全息图时分别获得对应于不同脉冲时刻的粒子场图像.实验证实了该技术的可行性.     

记录方式对光致聚合物中全息光栅形成过程的影响

根据光致聚合物记录机理,研究了不同记录方式对光栅衍射效率的影响.对已有的光致聚合物光栅形成的一阶扩散模型进行简化,求解出全息曝光、暗增长、均匀后曝光过程对应的折射率调制度的解析式.应用所得解析结果,对三种记录方式在不同光强下的折射率调制度动态进行数值模拟.采用蓝敏光致聚合物,分别在4 mW/cm~2和2 mW/cm~2光强下应用不同方式记录光栅,结果表明:如果曝光光强较高,暗增长的记录方式将获得相对高的饱和折射率调制度,而均匀后曝光会加速达到饱和的进程.     

基于双色光照明的单曝光同轴数字全息技术

提出了一种基于双色光照明的单曝光同轴数字全息技术。在红绿蓝三色中,任选两种波长的光来照射物体,采用彩色CCD记录双色同轴全息图,然后经过三基色分离数字处理,可得到两幅不同波长的同轴全息图。用角谱衍射理论对该技术进行了分析,表明在降低物参光振幅比的条件下,通过对同轴数字全息图求自然对数,可近似得到衍射物光及其共轭之和,其误差与物参光振幅比有关。取两幅不同波长的同轴数字全息图,经自然对数处理后,用传递函数可以很好地重构出物体图像,给出了具体的数字处理算法。用仿真实验,模拟了该技术的全息记录和处理过程,得到重构图像的峰值信噪比(PSNR)为14.2 dB。结果表明该方法可以去除孪生衍射像干扰,可以实现清晰的单曝光同轴全息成像。最后,分析了再现像中噪声产生的原因。该技术可用于基于同轴全息的实时成像与动态测量。     

全息存储用光致聚合物材料的暗增长现象研究

根据光致聚合物中光栅形成机制,应用数学模型与实验相结合的方法,研究了一种新型光致聚合物在全息记录中的暗增长现象.研究表明,应用不同写入光强使衍射效率达到相同的饱和程度后,前期的写入光较弱则对应后期的暗增长程度较强.为了利用暗增长过程提高衍射效率,设计并实施了非连续曝光实验,使曝光与暗增长过程交替进行.并且通过暗增长过程的实验数据拟合出该材料的扩散时间常量为21 s,据此设定非连续曝光的周期.结果表明,相同记录条件下,非连续曝光比连续曝光可以获得更高的衍射效率.     

Minimizing the effects of unmodulated light and uneven intensity profile on the holographic images reconstructed by pixelated spatial light modulators

A simple and effective approach is proposed to minimize the effect of unmodulated light and uneven intensity caused by the pixelated structure of the spatial light modulator in a holographic display. A more uniform image is produced by purposely shifting the holographic images of multiple reconstructed lights with different incident angles from the zero-diffraction-order and overlapping those selected different orders. The simulation and optical experimental results show that the influence of the zero-diffraction-order can be reduced, while keeping the good uniformity of the target images by this new approach.     

Characteristics of the reconstructed image upon multiplexing on-axis holograms

A comparative analysis of the experimental data on recording and multiplexing holograms, including speckle holograms, by an axial scheme is presented. The contrast and signal-to-noise ratio in the images reconstructed are compared. It is demonstrated that the thickness of the photosensitive material has an effect on the image quality during the recording of filamentary holograms.     

基于多角度无透镜傅里叶变换数字全息的散斑噪声抑制成像研究

在数字全息成像中,散斑噪声严重影响了再现像的信噪比和成像分辨率,因此为了提高数字全息成像质量,迫切需要抑制再现像的散斑噪声.分析并给出了矩形散射光斑的强度协方差,定量计算了特定实验条件下产生退相关散斑图样的最小角度差.结合透镜的性质设计并搭建了多角度无透镜傅里叶变换数字全息成像系统,利用光纤端面在透镜焦平面的二维机械移动代替传统反射镜的旋转,使照明光束在不改变照明位置和大小的同时,可任意改变光束方向.移动光纤端面使多角度照明满足最小角度差,获取了81幅数字全息图.利用单次快速傅里叶逆变换实现数值再现,对多幅再现像的强度像求平均,实验结果表明散斑对比度降低为单幅再现像的14.6%,使图像信噪比提高了6.9倍.该抑制散斑的多角度数字全息成像方法有效的抑制了散斑噪声,且成像光路结构简单,可操作性强.     

DC suppression in in-line digital holographic microscopes on the basis of an intensity-averaging method using variable pixel numbers

A simple method has been developed to suppress the DC term in in-line digital holographic microscope images. The technique is based on the use of the average intensity of a variable number of pixels rather than a fixed number of pixels. The DC-suppression ratio is similar to that associated with the averaging method proposed by Kreis and Juptner, while the image quality resulting from the new method is higher. This method can potentially yield significant improvements in the quality of reconstructed images.     

Digital holographic image fusion for a larger size object using compressive sensing

Digital holographic imaging fusion for a larger size object using compressive sensing is proposed. In this method, the high frequency component of the digital hologram under discrete wavelet transform is represented sparsely by using compressive sensing so that the data redundancy of digital holographic recording can be resolved validly, the low frequency component is retained totally to ensure the image quality, and multiple reconstructed images with different clear parts corresponding to a laser spot size are fused to realize the high quality reconstructed image of a larger size object. In addition, a filter combing high-pass and low-pass filters is designed to remove the zero-order term from a digital hologram effectively. The digital holographic experimental setup based on off-axis Fresnel digital holography was constructed. The feasible and comparative experiments were carried out. The fused image was evaluated by using the Tamura texture features. The experimental results demonstrated that the proposed method can improve the processing efficiency and visual characteristics of the fused image and enlarge the size of the measured object effectively.     

吲哚俘精酰胺的偏振全息图像光存储实验研究

在吲哚俘精酰胺/PMMA薄膜上记录了同偏振全息和正交偏振全息图，获得了它们的再现衍射像.实验结果表明：吲哚俘精酰胺具有光致各向异性，可以进行正交偏振全息记录.在偏振全息中，衍射光的偏振方向依赖于物光和再现光的偏振方向，衍射像的噪声主要来源于再现光照射到样品上引起的散射.正交偏振全息可以得到比同偏振全息更高信噪比的衍射像.存储于样品上的全息图在室温下黑暗处至少可以保存五个月而衍射效率无明显下降.结果表明，吲哚俘精酰胺是一种可用于偏振全息的可擦重写记录介质. 关键词： 偏振全息 光致各向异性 俘精酸酐 光致变色     

Laplacian differential reconstruction of in-line holograms recorded at two different distances

We analyze the diffraction of the picture obtained by the subtraction of two in-line holograms recorded in two planes at distances of z and z+Deltaz apart from the object plane. Our theoretical analysis reveals that the reconstructed field at the object plane is approximately equal to the Laplacian second-order differentiation of the object wave in transverse direction when Deltaz is much smaller than the distance z, that is, the reconstructed image presents a high quality of edge enhancement. We further investigate the dependence of the edge-enhancement quality on the longitudinal differential distance Deltaz and find that the reconstructed images have the sharpest edge-enhancement and high signal-to-noise ratio at the same time only when the value of Deltaz/z lies between 0.7% and 0.9% under our experimental condition. We also construct a criteria function, named the entropy of the image, to automatically focus the edge-enhanced image and demonstrate its adaptability in experiments.     

A novel coding method for high vividness three-dimensional holographic display

The quality of the reconstructed holographic three-dimensional image is seriously influenced by the noise. A novel encoded algorithm combining the Burch code with the four-step phase shifting method is presented to remove the noise and improve the contrast and resolution of the reconstructed image. The reconstructed three-dimensional images are compared with the results of the median filtering. The performance parameters of two methods are analyzed. The experimental results show that the zero-order light spot, conjugate image and speckle noise are suppressed effectively. The quality of the reconstructed image is noticeably improved.