Si3O cluster: excited properties under external electric field and oxygen-deficient defect models

This paper investigates the excited states of Si₃O molecule by using the single-excitation configuration interaction and density functional theory. It finds that the visible light absorption spectrum of Si₃O molecule comprises the yellow and the purple light without external electric field, however all the visible light is included except the green light under the action of external electric field. Oxygen-deficient defects, which also can be found in Si₃O molecule, have been used to explain the luminescence from silicon-based materials but the microstructures of the materials are still uncertain. Our results accord with the experimental values perfectly, this fact suggests that the structure of Si₃O molecule is expected to be one of the main basic structures of the materials, so the oxygen-deficient defect structural model for Si₃O molecule also has been provided to research the structures of materials.     

外电场作用下Si_2O分子的激发特性

主要对2种Si2O分子异构体的激发特性进行研究,由计算结果可知,外电场对Si2O分子的激发能,振子强度,跃迁偶极矩及吸收光谱有着显著的影响.无外电场时三角型Si2O(C2v,1A1)分子在可见光区无吸收谱,外电场作用下其在可见光区(407.18—526.93nm)有比较弱的吸收谱.直线型Si-Si-O(C∞v,3Σ-)分子在有无外电场作用时在蓝光和紫光区均有一定的吸收谱,其中比较难得的是在蓝色光区(478.88—488.59nm)呈现较强的吸收谱.     

The structure and luminescence properties of long afterglow phosphor Y3−xMnxAl5−xSixO12

A series of phosphors with the composition Y_3−xMn_xAl_5−xSi_xO₁₂ (x=0, 0.025, 0.050, 0.075, 0.150, 0.225, 0.300) were prepared with solid state reactions. The X-ray powder diffraction analysis of samples shows that the substitution of Mn²⁺ and Si⁴⁺ does not change the garnet structure of phosphors, but makes the interplanar distance decrease to a certain extent. The emission spectra show that Mn²⁺ in Y₃Al₅O₁₂ emits yellow-orange light in a broad band. With the increment of substitution content, the emission intensity of the phosphors increases firstly then decreases subsequently, and the emission peak moves to longer wavelength. Afterglow spectra and decay curves show that all the Mn²⁺ and Si⁴⁺ co-doped samples emit yellow-orange light with long afterglow after the irradiation of ultraviolet light. The longest afterglow time is 18 min. Thermoluminescence measurement shows that there exist two kinds of traps with different depth of energy level and their depth decreases with the increment of substitution content.     

The structure and luminescence properties of a novel orange emitting phosphor Y3MnxAl5−2xSixO12

A series of phosphors with the composition Y₃Mn_xAl_5−2xSi_xO₁₂ (x=0, 0.05, 0.1, 0.15, 0.2, 0.3, 0.4, 0.5, 0.6) was prepared through solid state reactions. X-ray powder diffraction analysis of samples shows that when co-doping content does not exceed 16% of Al³⁺, equimolar co-doping of Mn²⁺ and Si⁴⁺ does not change the garnet structure of phosphors, but makes the interplanar distance to decrease a certain extent. However, if the co-doping content exceeds 16%, new phases will form in the samples. The excitation and emission spectra of samples show that Mn²⁺ in Y₃Mn_xAl_5−2xSi_xO₁₂ emits broadband orange light (peak wavelength varies from 586 to 593 nm). With an increment in co-doping content, the emission intensity of the phosphors increases when the value of x is lower than 0.1 while it decreases when it is higher than 0.1 and the emission peak moves to a longer wavelength.     

Fabrication, characterization and photoelectrochemical properties of Fe2O3 modified TiO2 nanotube arrays

TiO₂ nanotube (NT) arrays modified by Fe₂O₃ with high sensibility in the visible spectrum were first prepared by annealing anodic titania NTs pre-loaded with Fe(OH)₃ which was uniformly clung to the titania NTs using sequential chemical bath deposition (S-CBD). The photoelectrochemical performances of the as-prepared composite nanotubes were determined by measuring the photo-generated currents and voltages under illumination of UV-vis light. The titania NTs modified by Fe₂O₃ showed higher photopotential and photocurrent values than those of unmodified titania NTs. The enhanced photoelectrochemical behaviors can be attributed to the modified Fe₂O₃ which increases the probability of charge-carrier separation and extends the range of the TiO₂ photoresponse from ultraviolet (UV) to visible region due to the low band gap of 2.2 eV of Fe₂O₃.     

硼酸对亚微米级Ca3Sc2Si3O12:Ce绿色荧光粉的制备及发光性能的影响

采用凝胶-燃烧法合成了Ca₃Sc₂Si₃O₁₂ ∶Ce绿色LED用荧光粉,用X射线粉末衍射(XRD)、扫描电镜(SEM)、荧光光谱仪等对合成产物进行了分析和表征.结果表明:通过添加H₃BO₃做助熔剂,制得的荧光粉晶相纯正,颗粒形貌均呈现为较规则的类球形,而且所得荧光粉的粒径均小于1 μm.发射光谱呈现为一宽带,发射主峰位于505 nm,该宽峰对应于Ce³⁺关键词： 白光LED 荧光粉 3Sc₂Si₃O₁₂ ∶Ce')" href="#">Ca₃Sc₂Si₃O₁₂ ∶Ce 发光     

Study on the photocatalytic activity of K2La2Ti3O10 doped with zinc(Zn)

The layered perovskite type oxides, K₂La₂Ti₃O₁₀ and zinc(Zn)-doped K₂La₂Ti₃O₁₀ were prepared by sol-gel method and were characterized by power X-ray diffraction, UV-vis diffuse reflectance and X-ray photoelectron spectroscopy. The photocatalytic activity for water splitting of the catalyst powders was investigated with I⁻ as electron donor under ultraviolet and visible light irradiation respectively. The electronic structure of the powders has been analyzed by the first principles calculation, which reveals the photo responses in the visible region and the improvement of the photocatalytic activity of K₂La₂Ti₃O₁₀. Conclusions were made that zinc(Zn)-doped K₂La₂Ti₃O₁₀ exhibited higher reactivity for hydrogen production. When I⁻ was used as electron donor, the optimum doping concentration of zinc(Zn) was found to be 0.015:1 (n_Zn:n_Ti). The average hydrogen production rates were 126.6 μmol/(gcat h) under ultraviolet irradiation and 55.5 μmol/(gcat h) under visible light irradiation which were raised by 131% and 251% compared with undoped K₂La₂Ti₃O₁₀ photocatalyst, respectively.     

Synthesis of Y2Si2O7:Eu nanocrystal and its optical properties

Nanocrystalline Y₂Si₂O₇:Eu phosphor with an average size about 60 nm is easily prepared using silica aerogel as raw material under ultrasonic irradiation and annealing temperature at 300-600 °C and this nanocrystalline decomposes into Y₂O₃:Eu and silica by heat treatment at 700-900 °C. The excitation broad band centered at 283 and 254 nm results from Eu³⁺ substituting for Y³⁺ in Y₂Si₂O₇ and Y₂O₃/SiO₂, respectively. Compared with Y₂O₃:Eu/SiO₂ crystalline, the PL excitation and emission peaks of Y₂Si₂O₇:Eu nanocrystalline red-shift and lead to the enhance of its luminescence intensity due to the different chemical surroundings of Eu³⁺ in above nanocrystallines. The decrease of PL intensity may be ascribed to quenching effect resulting from more defects in Y₂O₃:Eu/SiO₂ crystalline.     

Optical absorption and thermoluminescence studies on LiF-Sb2O3-B2O3 glasses doped with Ni ions

20LiF-(30−x)Sb₂O₃-50B₂O₃:xNiO glasses with the value of x (ranging from 0 to 1.0 mol% in steps of 0.2) were prepared. A number of studies, viz. differential scanning calorimetry, optical absorption, magnetic susceptibility and thermoluminescence, on these glasses were carried out as a function of nickel ion concentration. An anomaly has been observed in all the properties of these glasses when NiO concentration is about 0.6 mol%. The results of these studies were analysed in the light of different environments of nickel ions in the glass network.     

Crystal structure and photoluminescence of (Y1−xCex)2Si3O3N4

Oxonitridosilicate phosphors with compositions of (Y_1−xCe_x)₂Si₃O₃N₄ (x=0−0.2) have been synthesized by solid state reaction method. The structures and photoluminescence properties have been investigated. Ce³⁺ ions have substituted for Y³⁺ ions in the lattice. The emission and excitation spectra of these phosphors show the characteristic photoluminescence spectra of Ce³⁺ ions. Based on the analyses of the diffuse reflection spectra and the PL spectra, a systematic energy diagram of Ce³⁺ ion in the forbidden band of sample with x=0.02 is given. The best doping Ce content in these phosphors is ∼2 mol%. The quenching temperature is ∼405 K for the 2 mol% Ce content sample. The luminescence decay properties were investigated. The primary studies indicate that these phosphors are potential candidates for application in three-phosphor-converted white LEDs.     

Ce4+离子在Ca2SnO4一维结构基质中的电荷迁移光谱研究

利用高温固相反应法制备了Ca₂Sn_1-xCe_xO₄和Ca_2-ySr_ySn_1-xCe_xO₄一维结构发光体. XPS结果显示 Ca₂SnO₄拥有两种结合能分别为5277 eV和5293 关键词： 2Sn_1-xCe_xO₄')" href="#">Ca₂Sn_1-xCe_xO₄ 2-ySr_ySn_1-xCe_xO₄')" href="#">Ca_2-ySr_ySn_1-xCe_xO₄ 一维结构 电荷迁移光谱     

Energy transfer and luminescent properties of Ce, Cr co-doped Y3Al5O12

The phosphors in the system Y_3−xAl_5-yO₁₂:xCe³⁺,yCr³⁺ were synthesized by solid-state reactions and their photoluminescence properties were investigated. These phosphors have absorption in the visible light region and give luminescence in the far-red region (∼688 nm), which are suitable for the application in the device of luminescent solar concentrator (LSC). In these phosphors, Ce³⁺ located at Y³⁺ site can effectively transfer its absorbed energy to Cr³⁺ at Al³⁺ site.     

Si2O2 molecule: structure of ground state and the excited properties under different external electric fields

Geometry and vibrational frequencies of the ground state of Si 2 O 2 molecule are studied using density function theory (DFT) at the level of cc-pvtz and 6-311++G.It is found that the optimizing value by B3lyp/cc-pvtz is closer to the experimental data.The excited properties under different external electric fields are also investigated by the time-dependent-DFT method.Transitions from the ground state of Si 2 O 2 molecule to the first singlet state under different external electric fields can take place more easily.The corresponding absorption spectral line is about 360 nm in wavelength and the excitation energy is about 3.4 eV.     

Luminescence of La3F3[Si3O9]:Ce

The luminescence properties of Ce³⁺ in La₃F₃[Si₃O₉] are reported. Excitation and emission bands corresponding to 4f¹→5d¹ transitions of Ce³⁺ were identified. The center of gravity of the 5d states lies at remarkable high energy (43.2×10³ cm⁻¹) for Ce³⁺ in a silicate compound. This high value is attributed to the combined oxygen/fluoride coordination of the Ce³⁺ ion. Emission from the lowest 4f5d level to the ²F_5/2 and ²F_7/2 levels was found at 32.4×10³ and 30.4×10³ cm⁻¹. These results are compared with literature data on silicates and fluorides. From the values found for Ce³⁺, predictions are made for the positions of the 4f5d bands of Pr³⁺ and Er³⁺ in La₃F₃[Si₃O₉]. For both ions, it is concluded that in this host lattice emission is expected from high lying 4fⁿ energy levels.     

Preparation of photocatalytic Fe2O3-TiO2 coatings in one step by metal organic chemical vapor deposition

There are two major difficulties in the TiO₂ liquid-solid photocatalytic system: effective immobilization of the TiO₂ particles; and improving the catalytic activity under visible light. To simultaneously solve these two problems, Fe₂O₃-TiO₂ coatings supported on activated carbon fiber (ACF), have been prepared in one step by a convenient and efficient method—metal organic chemical vapor deposition (MOCVD). XRD results revealed that Fe₂O₃-TiO₂ coatings mainly composed of anatase TiO₂, α-Fe₂O₃ phases and little Fe₂Ti₃O₉. The pore structure of ACF was preserved well after loading with Fe₂O₃-TiO₂ coatings. UV-vis diffuse reflectance spectra showed a slight shift to longer wavelengths and an enhancement of the absorption in the visible region for Fe₂O₃-TiO₂ coatings, compared to the pure TiO₂ sample. A moderate Fe₂O₃-TiO₂ loading (13.7 wt%) was beneficial to mineralizing wastewater because the intermediates could be adsorbed onto the surface of photocatalyst following decomposition. The stable performance revealed that the Fe₂O₃-TiO₂ coatings were strongly adhered to the ACF surface, and the as prepared catalysts could be reused showing potential application for wastewater treatment.     

Influence of valence states and co-ordination of cobalt ions on dielectric properties of PbO-Bi2O3-As2O3:CoO glass system

The glasses of the composition (40−x) PbO-15Bi₂O₃-45As₂O₃-xCoO, with 0≤x≤0.6 mol% in the steps of 0.1 were synthesized. The dielectric properties viz., dielectric constant, loss and ac conductivity over moderately larger ranges of frequency and temperature were investigated. The results were analyzed with the aid of the data on optical absorption and IR spectra. The analysis indicated that there is an increase in the insulating strength of the glasses with increase in the concentration of CoO up to 0.4 mol%.     

Magnéli相亚氧化钛Ti8O15的电子结构和光学性能的第一性原理研究

采用基于密度泛函理论的平面波超软赝势法研究了Magnéli相亚氧化钛Ti₈O₁₅的电子结构和光学性能. 计算出的能带结构显示Ti₈O₁₅相比锐钛型TiO₂禁带宽度大幅度降低. 态密度分析表明, 其原因在于Ti₈O₁₅的O原子的2p轨道以及Ti原子的3p, 3d轨道相对于TiO₂的相应轨道向左产生了偏移, 同时由于O原子的缺失使得Ti原子的3d, 3p轨道多余电子在Fermi能级附近聚集形成新的电子能级. 态密度分析结果还显示, 相对于TiO₂, Ti₈O₁₅ Fermi能级附近电子格局发生了如下变化: O原子的2p轨道电子贡献减少, Ti原子的3d轨道的电子对Fermi能级贡献增大. 光吸收计算图谱表明, TiO₂仅在紫外光区有较高的光吸收能力, 而Ti₈O₁₅由于禁带宽度变窄引起光吸收范围红移到可见光区, 从而在紫外光区和可见光区都有较高的光吸收能力, 计算结果与实验得到的紫外-可见漫反射吸收光谱结果一致. 关键词： 第一性原理 8O₁₅')" href="#">Magnéli相亚氧化钛Ti₈O₁₅ 电子结构 光学性能     

Synthesis and photocatalytic oxidation of different organic dyes by using Mn2O3/TiO2 solid solution and visible light

Mn₂O₃/TiO₂ solid solution was prepared from two different oxides, manganese oxide (from KMnO₄ and ethanol) and TiO₂, these samples were characterized by BET, XRD, EDAX, SEM, FT-IR, ESR, XPS and UV–vis absorption spectroscopy. Photocatalytic activities of Mn₂O₃/TiO₂ powder was investigated by photooxidation of different dyes like Rhodamine B, thymol blue, methyl orange and Bromocresol green under visible light (300-W Xe lamp; λ > 420 nm). The results show that the alloy of TiO₂ with 1 mol% of Mn₂O₃ (MNT1) exhibit photocatalytic activity 3–5 times higher than that of P25 TiO₂ for oxidation of various dyes (RB, TB, MO and BG). The average particle size and crystallite size of MNT1 were found to be 100 nm and 12 nm measured from SEM and XRD, respectively. The EPR spectra of the Mn₂O₃/TiO₂ samples is a sharp five-line Mn(III) component centered on g_eff = 1.99.     

铈和磷钨酸共掺杂纳米二氧化钛中空纤维的制备及其光催化活性

以棉花纤维为模板,以钛酸四正丁酯、硝酸铈铵和磷钨酸为原料采用模板法制备了一系列铈和磷钨酸共掺杂的、具有中空纤维结构的TiO₂光催化材料, 利用扫描电子显微镜、X射线衍射、BET和紫外-可见光谱等技术对其形貌、晶体结构及表面结构、光吸收特性等进行了表征. 以苯酚溶液的光催化降解为模型反应,考察了不同掺杂量的样品在紫外和可见光下的光催化性能. 结果表明,用模板法制备的TiO₂纤维材料具有中空结构,共掺杂的TiO₂纤维在紫外和可见光条件下较纯TiO₂纤维和单掺杂TiO₂纤维对苯酚溶液具有更好的光催化降解效果, 且铈和磷钨酸的掺杂量显著影响该纤维材料的催化性能;当铈掺杂量为0.3mol%和磷钨酸掺杂量为2mol%,在500 oC焙烧2 h所得中空纤维材料的催化性能最佳,4 h即可使苯酚溶液的降解率达98.5%;重复使用4次仍可使苯酚溶液的降解率保持在87%以上,且该催化剂材料易于离心分离去除.     

Cr3+掺杂的Cd3Al2Ge3O12光谱特性及晶场参数计算

采用高温固相法合成了Cd₃Al₂Ge₃O₁₂：Cr³⁺多晶材料,利用X射线衍射对其结构进行了分析,通过Cr³⁺的室温吸收光谱、室温和77K发射光谱分别对其光谱特性和晶场参数进行了分析和计算.结果表明：在450 nm的蓝光激发下,Cd₃Al₂Ge₃O₁₂：Cr³⁺室温发 关键词： 3Al₂Ge₃O₁₂：Cr³⁺')" href="#">Cd₃Al₂Ge₃O₁₂：Cr³⁺ 荧光光谱 晶场参数 可调谐激光