Influence of crystallization treatment on structure,magnetic properties and magnetocaloric effect of Gd71Ni29 melt-spun ribbons

The influence of crystallization treatment on the structure, magnetic properties and magnetocaloric effect of Gd₇₁Ni₂₉ melt-spun ribbons has been investigated in detail. Annealing of the melt-spun samples at 610 K for 30 min, a majority phase with a Fe₃C-type orthorhombic structure (space group, Pnma) and a minority phase with a CrB-type orthorhombic structure (space group, Cmcm) were obtained in the amorphous matrix. The amorphous melt-spun ribbons undergo a second-order ferromagnetic to paramagnetic phase transition at 122 K. For the annealed samples, two magnetic phase transitions caused by amorphous matrix and Gd₃Ni phases occur at 82 and 100 K, respectively. The maximum magnetic entropy change (–ΔS_M)^max is 9.0 J/(kgˑK) (5T) at 122 K for the melt-spun ribbons. The values of (–ΔS_M)^max in annealed ribbons are 1.0 and 5.7 J/(kgˑK), corresponding to the two adjacent magnetic transitions.     

Thermal stability,magnetic and magnetocaloric properties of Gd55Co35M10 (M = Si,Zr and Nb) melt-spun ribbons

The thermal stability, magnetic and magnetocaloric properties of Gd₅₅Co₃₅M₁₀ (M = Si, Zr and Nb) melts-pun ribbons were studied. The relatively high reduced glass transition temperature (T_x1/T_m > 0.60) and low melting point (T_m) resulted in excellent glass forming ability (GFA). The Curie temperatures (T_C) of melt-spun amorphous ribbons Gd₅₅Co₃₅M₁₀ for M = Si, Zr and Nb were 166, 148 and 173 K, respectively. For a magnetic field change of 2 T, the values of maximum magnetic entropy change (−ΔS_M)^max for Gd₅₅Co₃₅Si₁₀, Gd₅₅Co₃₅Zr₁₀ and Gd₅₅Co₃₅Nb₁₀ were found to be 2.86, 4.28 and 4.05 J kg⁻¹K⁻¹, while the refrigeration capacity (RC) values were 154, 274 and 174 J kg^–1, respectively. The RC_FWHM values of amorphous alloys Gd₅₅Co₃₅M₁₀ (M = Si, Zr and Nb) are comparable to or larger than that of LaFe_11.6Si_1.4 crystalline alloy. Large values of (−ΔS_M)^max and RC along with good thermal stability make Gd₅₅Co₃₅M₁₀ (M = Si, Zr and Nb) amorphous alloys be potential materials for magnetic cooling operating in a wide temperature range from 150 to 175 K, e.g., as part of a gas liquefaction process.     

Magnetic entropy change involving martensitic transition in NiMn-based Heusler alloys

Our recent progress on magnetic entropy change (ΔS) involving martensitic transition in both conventional and metamagnetic NiMn-based Heusler alloys is reviewed. For the conventional alloys, where both martensite and austenite exhibit ferromagnetic (FM) behavior but show differentmagnetic anisotropies, a positive ΔS as large as 4.1 J·kg^-1·K^-1 under a field change of 0–0.9 T was first observed at martensitic transition temperature T_M ~ 197 K. Through adjusting the Ni:Mn:Ga ratio to affect valence electron concentration e/a, T_M was successfully tuned to room temperature, and a large negative ΔS was observed in a single crystal. The -ΔS attained 18.0 J·kg-1·K-1 under a field change of 0–5 T. We also focused on the metamagnetic alloys that show mechanisms different from the conventional ones. It was found that post-annealing in suitable conditions or introducing interstitial H atoms can shift the T_M across a wide temperature range while retaining the strong metamagnetic behavior, and hence, retaining large magnetocaloric effect (MCE) and magnetoresistance (MR). The melt-spun technique can disorder atoms and make the ribbons display a B2 structure, but the metamagnetic behavior, as well as the MCE, becomes weak due to the enhanced saturated magnetization of martensites. We also studied the effect of Fe/Co co-doping in Ni₄₅(Co_1-xFe_x)5Mn36.6In13.4 metamagnetic alloys. Introduction of Fe atoms can assist the conversion of the Mn–Mn coupling from antiferromagnetic to ferromagnetic, thus maintaining the strong metamagnetic behavior and large MCE and MR. Furthermore, a small thermal hysteresis but significant magnetic hysteresis was observed around T_M in Ni₅₁Mn_49-xIn_x metamagnetic systems, which must be related to different nucleation mechanisms of structural transition under different external perturbations.     

GREAT MAGNETIC ENTROPY CHANGE IN La(Fe, M)13 (M=Si, Al) WITH Co DOPING

Very large magnetic entropy change Δ S_M, which originates from a fully reversible second-order transition at Curie temperature T_C, has been discovered in compounds La(Fe, Si)₁₃, La(Fe, Al)₁₃ and those with Co doping. The maximum change ΔS_M\approx19 J·kg^-1·K^-1, achieved in LaFe_11.4Si_1.6 at 209K upon a 5T magnetic field change, exceeds that of Gd by more than a factor of 2. The T_C of the Co-doped compounds shifts to higher temperatures. ΔS_M still has a considerable large magnitude near room temperature. The phenomena of very large ΔS_M, convenience of adjustment of T_C, and also thesuperiority of low cost, strongly suggest that the compounds La(Fe, M)₁₃ (M=Si, Al) with Co doping are suitable candidates for magnetic refrigerants at high temperatures.     

Field-induced structural transition and the related magnetic entropy change in Ni43Mn43Co3Sn11 alloy

Magnetic properties and magnetic entropy change ΔS were investigated in Heusler alloy Ni₄₃Mn₄₃Co₃Sn₁₁. With decreasing temperature this alloy undergoes a martensitic structural transition at T_M=188 K. The incorporation of Co atoms enhances ferromagnetic exchange for parent phases. Austenitic phase with cubic structure shows strong ferromagnetic behaviors with Curie temperature T_C^A at 346 K, while martensitic phase shows weak ferromagnetic properties. An external magnetic field can shift T_M to a lower temperature at a rate of 4.4 K/T, and a field-induced structural transition from martensitic to austenitic state takes place at temperatures near but below T_M. As a result, a great magnetic entropy change with positive sign appears. The size of ΔS reaches 33 J/kg K under 5 T magnetic field. More important is that the ΔS displays a table-like peak under 5 T, which is favorable for Ericsson-type refrigerators.     

Magnetic properties and magnetocaloric effects in Gd1−xHoxNiIn intermetallic compounds

Magnetic properties and magnetocaloric effects (MCEs) of the intermetallic Gd_1?xHo_xNiIn (x=0?1) compounds have been evaluated by magnetization and heat capacity measurements. The Curie temperature T_C can be tuned from near 100 K to 20 K by substituting Ho for Gd atoms. In addition, all the compounds with Ho atoms undergo two successive magnetic transitions with the decrease of temperature: a paramagnetic (PM) to ferromagnetic (FM) transition around T_C and a spin-reorientation (SR) transition around 7?9 K. It is found that both transitions contribute to the magnetic entropy change (ΔS_M). For a field change of 5 T, the maximum values of ?ΔS_M for Gd_0.4Ho_0.6NiIn are 6 J/kg K at T_t=9 K and 10 J/kg K at T_C=52 K, respectively. These two ?ΔS_M peaks overlap partly and result in a wide working temperature range of MCE, and thus leading to the largest RC value of 443 J/kg in the Gd_1?xHo_xNiIn system.     

Magnetic properties and magnetocaloric effect of Sr-doped Pr0.7Ca0.3MnO3 compounds

In this work, we pointed out that Sr substitution for Ca leads to modify the magnetic and magnetocaloric properties of Pr_0.7Ca_0.3-xSr_xMnO₃ compounds. Analyzing temperature dependence of magnetization, M(T), proves that the Curie temperature (T_C) increased with increasing Sr content (x); T_C value is found to be 130–260 K for x = 0.0–0.3, respectively. Using the phenomenological model and M(T,H) data measured at several applied magnetic field, the magnetocaloric effect of Pr_0.7Ca_0.3-xSr_xMnO₃ compounds has been investigated through their temperature and magnetic field dependences of magnetic entropy change ΔS_m(T,H) and the change of the specific heat change ΔC_P(T,H). Under an applied magnetic field change of 10 kOe, the maximum value of -ΔS_m is found to be about 3 J/kg·K, and the maximum and minimum values of ΔC_P(T) calculated to be about ±60 J/kg·K for x = 0.3 sample. Additionally, the critical behaviors of Pr_0.7Ca_0.3-xSr_xMnO₃ compounds around their T_C have been also analyzed. Results suggested a coexistence of the ferromagnetic short- and long-range interactions in samples. Moreover, Sr-doping favors establishing the short-range interactions.     

Near room temperature magnetocaloric properties of melt-spun Gd100−xBx (x=0, 5, 10, 15, and 20 at%) alloys

The magnetocaloric properties of melt-spun Gd-B alloys were examined with the aim to explore their potential application as magnetic refrigerants near room temperature. A series of Gd_100−xB_x (x=0, 5, 10, 15, and 20 at%) alloys were prepared by melt spinning. With the decrease in Gd/B ratio, Curie temperature (T_C) remains constant at ∼293 K, and saturation magnetization, at 275 K, decreases from ∼100 to ∼78 emu/g. Negligible magnetic hysteresis was observed in these alloys. The peak value of magnetic entropy change, (−ΔS_M)_max, decreased from ∼9.9 J/kg K (0-5 T) and ∼5.5 J/kg K (0-2 T) for melt-spun Gd to ∼7.7 J/kg K (0-5 T) and ∼4.0 J/kg K (0-2 T), respectively for melt-spun Gd₈₅B₁₅ and Gd₈₀B₂₀ alloys. Similarly, the refrigeration capacity (q) decreased monotonously from ∼430 J/kg (0-5 T) for melt-spun Gd to ∼330 J/kg (0-5 T) for melt-spun Gd₈₀B₂₀ alloy. The near room temperature magnetocaloric properties of melt-spun Gd_100−xB_x (0≤x≤20) alloys were found to be comparable to few first-order transition based magnetic refrigerants.     

Magnetocaloric properties of the La0.7Pr0.3Fe13−xSix compounds

Magnetic entropy change ΔS_m, hysteresis loss and refrigerant capacity of NaZn₁₃-type La_0.7Pr_0.3Fe_13−xSi_x (1.5?x?2.0) compounds have been investigated. The Curie temperature T_C increases linearly with the increase of silicon concentration. Although the maximum value of ΔS_m under a field change of 0−5 T decreases from 30.5 to 11.4 J/kg K as x increases from 1.5 to 2.0, the hysteresis loss at T_C reduces remarkably from 89.2 J/kg for x=1.5 to zero for x=2.0 because the increase of Si content can weaken the itinerant electron metamagnetic transition. The effective refrigerant capacity RC_eff is maintained at high values of 362−439 J/kg for a field change of 0−5 T. This implies that a large ΔS_m and a high RC_eff can be achieved simultaneously in the La_0.7Pr_0.3Fe_13−xSi_x compounds.     

Giant magnetocaloric effect in the Gd5Ge2.025Si1.925In0.05 compound

The magnetocaloric properties of the Gd 5 Ge 2.025 Si 1.925 In 0.05 compound have been studied by x-ray diffraction,magnetic and heat capacity measurements.Powder x-ray diffraction measurement shows that the compound has a dominant phase of monoclinic Gd5Ge2Si2-type structure and a small quantity of Gd 5(Ge,Si) 3-type phase at room temperature.At about 270 K,this compound shows a first order phase transition.The isothermal magnetic entropy change(△SM) is calculated from the temperature and magnetic field dependences of the magnetization and the temperature dependence of MCE in terms of adiabatic temperature change(△Tad) is calculated from the isothermal magnetic entropy change and the temperature variation in zero-field heat-capacity data.The maximum S M is 13.6 J·kg-1·K-1 and maximum △Tad is 13 K for the magnetic field change of 0-5 T.The Debye temperature(θD) of this compound is 149 K and the value of DOS at the Fermi level is 1.6 states/eV·atom from the low temperature zero-field heat-capacity data.A considerable isothermal magnetic entropy change and adiabatic temperature change under a field change of 0-5 T jointly make the Gd5Ge2.025Si1.925 In 0.05 compound an attractive candidate for a magnetic refrigerant.     

Structure and magnetic entropy change of suck-cast Gd60Co26Al6Ge8 alloy

The Gd₆₀Co₂₆Al₆Ge₈ alloy has been prepared by the copper-mold suck-casting and its phase component has been investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy-dispersive spectroscopy (EDS). It is shown that this alloy consists of primary crystalline Gd₅Ge₃ phase and amorphous matrix. The glass transition temperature (T_g) and crystallization temperatures (T_x) occur at 292 and 320 °C, respectively. The maximal magnetic entropy change (ΔS_M) under 0-5 T field is about 7.6 J (kg⁻¹ K⁻¹) at 155 K and the refrigeration capacity (RC) is about 768 J kg⁻¹, which makes Gd₆₀Co₂₆Al₆Ge₈ bulk metallic glass matrix composite a promising candidate for magnetic refrigerant.     

Structural,magnetic and magnetocaloric properties of AMn1−xGaxO3 compounds with 0≤x≤0.2

Structural, magnetic and magnetocaloric properties of manganites series with the AMn_1−xGa_xO₃ (A=La_0.75Ca_0.08Sr_0.17 and x=0, 0.05, 0.1 and 0.2) composition have been investigated to shed light on Ga-doping influence. Solid-state reaction method was used for preparation. From XRD study, all samples are found single phase and crystallize in the orthorhombic structure with the Pnma space group. The variation of the magnetization M vs. temperature T, under an applied magnetic field of 0.05 T, reveals a ferromagnetic–paramagnetic transition for all samples. The experimental results indicate that T_C decreases from 336 to 135 K with increasing Ga substitution. Magnetocaloric effect (MCE) was estimated, in terms of isothermal magnetic entropy change (−ΔS_M), using the M(T, μ₀H) data and employing the thermodynamic Maxwell equation. The maximum entropy change and Relative Cooling Power (RCP) show non-monotonic behaviors with increasing the concentration of Gallium. In fact, the maximum value of ΔS_Mmaxof AMn_1−xGa_xO₃ for x=0.00 and 0.2 samples is found to be, respectively, 2.87 and 1.17 J/kg/K under an applied magnetic field change of 2 T. For the same applied magnetic field (μ₀H=2 T), the RCP values are found to vary between 97.58 and 89 J/kg.     

Phase transitions and the magnetocaloric effect in Mn rich Ni–Mn–Ga Heusler alloys

In Mn rich polycrystalline Heusler alloys, Ni₅₀Mn_25+−xGa_25−x, prepared by Arc melting, it is found that the structural/first-order magnetic transition temperature T_m increases as the Mn content increases. The Curie temperature T_c is higher than that of Ni rich alloys (Ni_50+xMn_25−xGa₂₅ ) of the same series, and is less affected by composition x. Magnetic entropy change of |ΔS_M| also increases as Mn content increases, while behaviour of the field dependence of ΔS_M is similar to that of single crystal Ni_52.6Mn_23.1Ga_24.3.     

Effect of heat treatment procedure on magnetic and magnetocaloric properties of Ni43Mn46In11 melt spun ribbons

The effect of heat treatment on the structural, magnetic and magnetocaloric properties of Ni₄₃Mn₄₆In₁₁ melt-spun ribbons was systematically investigated using X-ray powder diffraction (XRD), scanning electron microscope (SEM), atomic force microscope (AFM), magnetic force microscope (MFM) and magnetic measurements. From the XRD studies, tetragonal and cubic phases were detected at room temperature for as-spun, quenched and slow-cooled ribbons. Furthermore, it was observed, upon annealing martensite transition temperatures increased when compared to the as-spun ribbon. To avoid magnetic hysteresis losses in the vicinity of the structural transition region, the magnetic entropy changes-ΔS _m of the investigated ribbons were evaluated from temperature-dependent magnetisation-M(T) curves on cooling for different applied magnetic fields. The maximum ΔS _m value was found to be 6.79 J kg^?1 K^?1 for the quenched ribbon in the vicinity of structural transition region for a magnetic field change of 50 kOe.     

Re-entrant superconductivity in a magnetically ordered superconductor: La1-xGdxRu2

We have measured the critical temperature (T_c) and the upper critical magnetic field (H_c2) of La_1-xGdxRu₂. At low concentrations of the magnetic impurity (Gd), the suppression of T_c follows the expected Abrikosov-Gorkov (A-G) pair breaking curve. However, for larger concentrations, strong deviations below A-G are observed. Samples in this region (4. ? × ? 5. at. %) exhibit two T_c's. La_1-xGd_xRu₂ is known to order magnetically, probably as a spin glass, and the magnetic ordering temperature (T_M) has been measured in the normal state. This T_M curve intersects the T_c curve in the concentration range where the T_c curve is re-entrant and we therefore attribute the re-entrant T_c behavior to the magnetic ordering of the Gd³⁺ ions.     

Large magnetocaloric effect with a wide temperature range in Gd5Si4

Gd₅Si₄ magnets have attracted much attention due to their many appealing properties such as strong ferromagnetism, magnetovolume effect, and large reversal magnetocaloric effect (MCE). However, Gd₅Si₄ exhibits a relatively high Curie temperature (T_C ∼336 K) with a narrow refrigeration temperature span, which limits the refrigeration application at room temperature. Here we show that the T_C of Gd₅Si₄ can be reduced to 330 K and the phase transition temperature range can be effectively expanded by applying a high pressure of 6 GPa to the sample during heat treatment. In addition, the room-temperature magnetic entropy changes are improved and the refrigeration temperature span also becomes wider, which leads to an enhanced relative cooling power (RCP) of 748 Jkg^-1 under a magnetic field change of 5 T. These unique features indicate that the Gd₅Si₄ compound prepared under high pressure can serve as a magnetic refrigerant in a wide temperature range covering room temperature.     

Large magnetic entropy change and refrigerant capacity in rare-earth intermetallic RCuAl (R=Ho and Er) compounds

The magnetic properties and the magnetocaloric effects of RCuAl (R=Ho and Er) compounds have been investigated. Both HoCuAl and ErCuAl just undergo a second-order ferromagnetic–paramagnetic phase transition at T_C. Large reversible magnetic entropy changes (ΔS_M) are observed around their respective Curie temperatures due to the ferromagnetic–paramagnetic phase transition. For a field change of 0–5 T, the peak values of −ΔS_M of RCuAl (R=Ho and Er) compounds are 23.9 and 22.9 J kg⁻¹ K⁻¹ at T_C, with the values of refrigerant capacity of 393 and 321 J kg⁻¹, respectively. These properties suggest that RCuAl (R=Ho and Er) compounds could be considered as attractive magnetic refrigerants working in low temperature range.     

Sr-doping enhanced electrical transport and thermionic emission of single crystal 12CaO·7Al2O3 electride

Sr-doped single crystals (C_1-xS_x)12A7:e⁻ (x = 0, 0.01, 0.02, 0.03) were successfully fabricated by floating zone method. It is found that Sr-doping decreases the reduction time from 30 h to 20 h. The maximum emission current of (C_1-xS_x)12A7:e⁻ is greatly improved by 50% than that of the un-doped. The DFT calculations show Sr-doping in C12A7 contributed to the free O²⁻ in the cages spread out, leading to a short reduction time; increase the “window” between two adjacent cages that is conducive to the electrons in cages to escape. And the work function of the (C_1-xS_x)12A7:e⁻ is lower than that of C12A7:e⁻.     

Simultaneous enhancements of Curie temperature and magnetocaloric effects in the La1−xCexFe11.5Si1.5Cy compounds

The effects of introducing Ce and C atoms on the Curie temperature (T_C), the magnetic entropy change (ΔS_M) and the hysteresis loss have been investigated in the NaZn₁₃-type LaFe_11.5Si_1.5 compound. Partial replacement of La with Ce leads to a decrease in T_C and an increase in ΔS_M; however, the introduction of interstitial C atoms can adjust T_C to high temperature. The itinerant-electron metamagnetic transition is weakened after carbonization, which results in a reduction of both the hysteresis loss and magnetocaloric effect (MCE). The maximum value of ΔS_M for La_0.8Ce_0.2Fe_11.5Si_1.5C_0.2 is found to be −28 J/kg K at T_C=207 K with an effective refrigeration capacity of 420 J/kg for a field change from 0 to 5 T. Our study reveals that the enhancements of both T_C and MCEs can be achieved simultaneously in the La_1−xCe_xFe_11.5Si_1.5C_y compounds by adjusting the concentrations of Ce and C atoms appropriately.     

Influence of sample geometry on determination of magnetocaloric effect for Gd60Co30Al10 glassy ribbons using direct and indirect methods

Rare-earth based metallic glasses with high saturation magnetization show a sizeable magnetocaloric effect (MCE) and are subject of extensive research concerning magnetic refrigeration materials. In this work, the magnetic phase transition from paramagnetic to ferromagnetic of Gd₆₀Co₃₀Al₁₀ metallic glass has been characterized and three different methods were applied for the determination of its magnetocaloric specific parameters: (a) direct measurement of the adiabatic temperature change by exposing the material to an adiabatically applied magnetic field; (b) determination of the magnetization M(H,T) and calculation of the temperature dependent magnetic field induced entropy change ΔS_m by application of the Maxwell relation and (c) measuring the total heat capacity C_p(H,T) in zero and non-zero magnetic field. Gd₆₀Co₃₀Al₁₀ glassy ribbons were prepared by melt spinning, a technique that offers very high cooling rates due to the low dimensionality of the sample. Depending on the particular method of measurement, pieces of these glassy ribbons form samples with different appropriate total volume and dimensions. We show that the combination of the pronounced two-dimensionality of the ribbon pieces (aspect ratio ∼100) together with the very high magnetic permeability principally can cause strong internal demagnetizing fields that cannot be neglected when evaluating the intrinsic MCE parameters obtained from different methods.