Ultrasonic-assisted extraction of fenugreek flavonoids and its geographical-based comparative evaluation using green UHPLC-DAD analysis

BackgroundThis study, for the first time, reports a simultaneous determination of flavonoids; rutin (RT), quercetin (QT), luteolin (LT), and kaempferol (KF) in different origins of fenugreek seeds samples (N = 45) using a green UHPLC-DAD analysisMethodologyUltrasound-assisted extraction (UAE) was employed to extract fenugreek flavonoids using different polarity solvents of n-hexane (n-hex), dichloromethane (DCM), and methanol (MeOH)ResultsThe extract yield on an individual basis was observed in the range of 1.03–17.29 mg, with the highest yield (mg/sample) for the Egyptian sample (17.29 mg). The highest total extract yield (mg/origin) was observed for the Iranian sample (82.28 ± 5.38). The solvent with the highest extract yield (mg) was n-hex 169.35 ± 13.47, followed by MeOH 114.39 ± 12.27. The validated green UHPLC-DAD method resulted in a short runtime (9 min) with an accuracy of 97.86(±12.32)-101.37(±5.91), r²-values = 0.993–0.999, LOD = 2.09–4.48 ppm, and LOQ = 6.33–13.57 ppm for flavonoids analysis within the linearity range of 1–500 ppm. The general yield for flavonoids exhibited a descending order (ppm): RT (2924.55 ± 143.84) > QT (457.05 ± 34.07) > LT (82.37 ± 3.27) > KF (4.54 ± 0.00). The yield (ppm) for the flavonoids was more in MeOH solvent (3424.81 ± 235.44) constructing a descending order of MeOH > n-hex > DCM. For an individual flavonoid yield; MeOH was seen with an order of RT > QT > LT, n-hex (LT > QT), and DCM (RT > LT > QT). The statistical analysis of PCA (principle component analysis) revealed a widespread distribution of flavonoids in fenugreek seeds with a variance of 35.93% (PC1). Moreover, flavonoids extraction was prone to the nature and specificity of the solvent used (PC2: 33.34%) rather than the amount of the extract yield (P = 0.00). The K-mean cluster analysis showed the origins with higher flavonoids yield in appropriate solvent as I3M (Indian accession # 3 MeOH extract) with more QT amount, IR2M (Iranian accession # 2 MeOH extract) with more LT amount along with I2M (Indian accession # 2 MeOH extract) and Q2M (Qassim Saudi Arabia accession # 2 MeOH extract) containing high amount of RT. The outcomes are supported by KMO (Kaiser-Meyer-Olkin) and Bartlett’s test value of 0.56 with X²-value of 191.87 (P = 0.00)ConclusionThe samples were effectively evaluated and standardized in terms of flavonoid amount suggesting a significant variation in fenugreek quality.     

Sonoprocessing improves phenolics profile,antioxidant capacity,structure, and product qualities of purple corn pericarp extract

For the first time, purple corn pericarp (PCP) was converted to polyphenol-rich extract using two-pot ultrasound extraction technique. According to Plackett-Burman design (PBD), the significant extraction factors were ethanol concentration, extraction time, temperature, and ultrasonic amplitude that affected total anthocyanins (TAC), total phenolic content (TPC), and condensed tannins (CT). These parameters were further optimized using the Box-Behnken design (BBD) method for response surface methodology (RSM). The RSM showed a linear curvature for TAC and a quadratic curvature for TPC and CT with a lack of fit > 0.05. Under the optimum conditions (ethanol (50%, v/v), time (21 min), temperature (28 °C), and ultrasonic amplitude (50%)), a maximum TAC, TPC, and CT of 34.99 g cyanidin/kg, 121.26 g GAE/kg, and 260.59 of EE/kg, respectively were obtained with a desirability value 0.952. Comparing UAE to microwave extraction (MAE), it was found that although UAE had a lower extraction yield, TAC, TPC, and CT, the UAE gave a higher individual anthocyanin, flavonoid, phenolic acid profile, and antioxidant activity. The UAE took 21 min, whereas MAE took 30 min for maximum extraction. Regarding product qualities, UAE extract was superior, with a lower total color change (ΔE) and a higher chromaticity. Structural characterization using SEM showed that MAE extract had severe creases and ruptures, whereas UAE extract had less noticeable alterations and was attested by an optical profilometer. This shows that ultrasound, might be used to extract phenolics from PCP as it requires lesser time and improves phenolics, structure, and product qualities.     

Effects of ultrasound on the enzymatic degradation of pectin

Ultrasound-assisted enzymatic maceration (UAEM) has gained considerable interest in the fruit juice industry, owing to its potential to increase juice yield and content of polyphenols while simultaneously saving time and energy. In this study, the effects of UAEM (ultrasonic probe, 20 kHz, 21 W*cm⁻² and 33 W*cm⁻²) on pectin degradation in a continuous circulation system were investigated over 60 and 90 min. Main pectinolytic enzymes activities of (polygalacturonase, pectin lyase and pectin methylesterase) of a commercial enzyme preparation were examined for individual synergistic effects with US. Pectin hydrolysis by UAEM differed significantly compared to treatment with ultrasound or enzymes alone regarding the profile of degradation products compared to treatment with ultrasound or enzymes alone. Ultrasound fragmented pectin to less branched oligomers of medium molecular weight (Mp approx. 150 kDa), which were further degraded by pectinolytic activities. The low molecular weight fraction (<30 kDa), which is known to be beneficial for juice-quality by adding nutritional value and stabilizing polyphenols, was enriched in small oligomers of homogalacturonan-derived, rhamnogalacturonan I-derived, and rhamnogalacturonan II-derived residues. Synergistic effects of ultrasound application enhanced the effective activities of polygalacturonase and pectin lyase and even prolonged their performance over 90 min, whereas the effective activity of pectin methylesterase was not affected. Final marker concentrations determined by each enzyme assay revealed a considerable higher total process output after UAEM treatment at reduced temperature (30 °C) comparable to the output after conventional batch maceration at 50 °C. The obtained results demonstrate the high potential of UAEM to produce high-quality juice by controlling pectin degradation while reducing process temperature and equally highlight the matrix and enzyme specific effects of a simultaneous US treatment.     

Inactivation of foodborne pathogens based on synergistic effects of ultrasound and natural compounds during fresh produce washing

Ultrasound has potential to be used for disinfection, and its antimicrobial effectiveness can be enhanced in presence of natural compounds. In this study, we compared the antimicrobial effects of ultrasound at 20 kHz (US 20 kHz) or 1 MHz (US 1 MHz) in combination with carvacrol, citral, cinnamic acid, geraniol, gallic acid, lactic acid, or limonene against E. coli K12 and Listeria innocua at a constant power density in water. Compared to the cumulative effect of the individual treatments, the combined treatment of US 1 MHz and 10 mM citral generated >1.5 log CFU/mL additional inactivation of E. coli K12. Similarly, combined treatments of US 1 MHz and 2 mM carvacrol (30 min), US 20 kHz and 2 mM carvacrol, 10 mM citral, or 5 mM geraniol (15 min) generated >0.5–2.0 log CFU/mL additional inactivation in L. innocua. The synergistic effect of citral, as a presentative compound, and US 20 kHz treatment was determined to be a result of enhanced dispersion of insoluble citral droplets in combination with physical impact on bacterial membrane structures, whereas the inactivation by US 1 MHz was likely due to generation of oxidative stress within the bacteria. Combined ultrasound and citral treatments improved the bacterial inactivation in simulated wash water in presence of organic matter or during washing of inoculated blueberries but only additive antimicrobial effects were observed. Findings in this study will be useful to enhance fresh produce safety and shelf-life and design other alternative ultrasound based sanitation processes.     

Comparison of ultrasound and microwave assisted extraction of diosgenin from Trigonella foenum graceum seed

From the recent market trend, there is a huge demand for the bioactive compounds from various food matrices that could be capable enough to combat the emerging health effects in day-to-day life. Fenugreek is a well-known spice from ancient times for its medicinal and health benefits. In the present study, two methods of green extraction microwave (MAE) and ultrasound (UAE) assisted were studied in regard of extraction of fenugreek diosgenin. In this study, solvent type (acetone, ethanol, hexane and petroleum ether), solvent concentration (40, 60, 80 and 100%) and treatment time (1.5, 3.0, 4.5 and 6.0 min and 30, 40, 50 and 60 min for MAE and UAE method respectively) was varied to observe the effect of these parameters over extract yield and diosgenin content. The results of this study revealed that treatment time, type of solvent and its concentration and method adopted for extraction of diosgenin has significant effect. In relation with better yield extract and diosgenin content, the yield of fenugreek seed extract was 7.83% with MAE and 21.48% with UAE of fenugreek seed powder at 80% ethanol concentration at 6 and 60 min respectively. The content of diosgenin was observed in fenugreek seed powder extract was 35.50 mg/100 g in MAE and 40.37 mg/100 g in UAE with 80% ethanol concentration at 6 and 60 min respectively. The overall range of yield of fenugreek extract was varied from 1.04% to 32.48% and diosgenin content was 15.82 mg/100 g to 40.37 mg/100 g of fenugreek seed powder including both extraction methods. This study revealed that UAE would impose better ways for preparing fenugreek extract and observing diosgenin content from fenugreek seeds.     

Effect of sonication on B cell development and immunomodulatory functions of Bursa of Fabricius

A study was initiated with the objective of evaluating the effects of sonication treatment on important quality parameters of extract of Bursa of Fabricius. Sonication of extract was done (frequency 20 kHz and various amplitude levels) at 0 °C for 10 min, 30 min, 50 min, respectively. As results, the yield of bursa peptides significantly increased (p < 0.05). Then we found sonicated bursa extract promoted the content of bursin and the CFU pre-B formation, exerted immunomodulatory function on antigen-specific immune responses in C57/BL6 mice immunized with inactivated Japanese encephalitis b virus (JEV) vaccine, including enhancing JEV-specific antibody and cytokine production, T-cell immunophenotyping and lymphocyte proliferation. Findings of the present study suggested the sonication treatment of Bursa of Fabricius could improve the yield as well as the quality of bursa peptides, indicating that sonication is effective in processing of bursa extract and could be a potential process for future immuno-pharmacological use.     

Ultrasound enhanced production of mycelia and exopolysaccharide by Agaricus bitorquis (Quél.) Sacc. Chaidam

Agaricus bitorquis (Quél.) Sacc. Chaidam (ABSC), is a kind of rare edible macrofungi with a variety of biological ingredients, especially its polysaccharides. However, the low yield limits the popularity and promotion of rare edible macrofungi as well as its macrofungi polysaccharides. Hence, developing a positive and effective cultivation method is of great importance. Herein, an efficient ultrasonic (US) stimulation strategy was developed to improve mycelial growth and exopolysaccharides (EPS) biosynthesis from ABSC in submerged cultivation without light. A time design was employed to illustrate the effect of various process parameters including duration, starting point and times of US irradiation on ABSC productivity. 5 min US treatment for once upon ABSC after fermentation for 48 h could significantly improve EPS production and mycelia growth by above 26% and 15.03%, respectively. Furthermore, six times of 5 min US treatment could make the amount of EPS reach 218.78 ± 17.09 mg/g, which was 2.52-fold higher than that of the control. Moreover, the enhanced effect induced by US was further expounded by fermentation kinetics. Besides, the US treatment could increase mycelia permeability, change structure and reduce mycelial diameter to promote mass transfer, resulting in the improvement of EPS production and mycelia accumulation. The results demonstrated that the present proposed US intensification approach could be useful to boost up the fermentation of ABSC, which possibly applied to yield increase and fermentation product acquisition of macrofungi.     

Optimization of ultrasonic-assisted extraction of astaxanthin from green tiger (Penaeus semisulcatus) shrimp shell

This study was aimed at optimizing the astaxanthin extraction efficiency from shrimp shell (green tiger, Penaeus semisulcatus). Astaxanthin was extracted using selected nonpolar/polar solvents (petroleum ether, n-hexane, ethanol, acetone) individually and in ternary mixtures of petroleum ether, acetone, and water in ratios of 15:50:35, 50:45:5, and 15:75:10 for different times (2,4 and 6 h). The results showed that solvents with higher polarity were more suitable for the extraction of astaxanthin, and increasing the extraction time from 2 to 6 h improved the extraction yield. The conditions of extraction of astaxanthin with the desirable solvent were then optimized with the ultrasonic method using the Box-Behnken design [variables included: extraction temperature (25 to 45 °C), extraction time (5 to 15 min), and ultrasound amplitude (20 to 100%)]. Optimal extraction conditions were determined as the ultrasonic amplitude of 23.6%, extraction time of 13.9 min, and extraction temperature of 26.3 °C. Under this optimum condition, the amount of astaxanthin, ferric reducing antioxidant power, and free radical scavenging capacity of the extract were obtained as 51.5%, 1705 μmol of Fe²⁺/g, and 73.9%, respectively. Extraction and analysis of the extract at the optimum point were used to validate the results.     

Ultrasound-assisted extraction of highly nutritious date sugar from date palm (Phoenix dactylifera) fruit powder: Parametric optimization and kinetic modeling

Alternative sweeteners to white sugar with a lower calorie content and glycemic index obtained through date palm fruits is of great interest to the food industry. In this study, ultrasound-assisted extraction of nutritive sugar from date fruit powder was investigated through Box-Behnken design. A maximum total sugar content (TSC) of 812 mg glucose eq./g of DFP was obtained with a sugar extraction yield (SEY) of 81.40 ± 0.27 % under the following optimal extraction conditions: extraction temperature of 60 °C, extraction time of 30 min, and L/S ratio of 7.6 mL/g. Various modern techniques were used to characterize the obtained extracts and associated residues. The results showed that the extract contained fructose, glucose, and sucrose and had good thermal stability. Furthermore, SEM and TSC analysis revealed that ultrasonic treatment of the biomass improved mass transfer diffusion due to acoustic or ultrasonic cavitation, resulting in a higher sugar yield.     

Ultrasound assisted extraction of pectin from waste Artocarpus heterophyllus fruit peel

Four factors three level face centered central composite response surface design was employed in this study to investigate and optimize the effect of process variables (liquid-solid (LS) ratio (10:1–20:1 ml/g), pH (1−2), sonication time (15–30 min) and extraction temperature (50–70 °C)) on the maximum extraction yield of pectin from waste Artocarpus heterophyllus (Jackfruit) peel by ultrasound assisted extraction method. Numerical optimization method was adapted in this study and the following optimal condition was obtained as follows: Liquid-solid ratio of 15:1 ml/g, pH of 1.6, sonication time of 24 min and temperature of 60 °C. The optimal condition was validated through experiments and the observed value was interrelated with predicted value.     

Automated analysis of immediate reliability of T2 and T2* relaxation times of hip joint cartilage from 3 T MR examinations

BackgroundMagnetic resonance (MR) T2 and T2* mapping sequences allow in vivo quantification of biochemical characteristics within joint cartilage of relevance to clinical assessment of conditions such as hip osteoarthritis (OA).PurposeTo evaluate an automated immediate reliability analysis of T2 and T2* mapping from MR examinations of hip joint cartilage using a bone and cartilage segmentation pipeline based around focused shape modelling.Study typeTechnical validation.Subjects17 asymptomatic volunteers (M: F 7:10, aged 22–47 years, mass 50–90 kg, height 163-189 cm) underwent unilateral hip joint MR examinations. Automated analysis of cartilage T2 and T2* data immediate reliability was evaluated in 9 subjects (M: F 4: 5) for each sequence.Field strength/sequenceA 3 T MR system with a body matrix flex-coil was used to acquire images with the following sequences: T2 weighted 3D-trueFast Imaging with Steady-State Precession (water excitation; 10.18 ms repetition time (TR); 4.3 ms echo time (TE); Voxel Size (VS): 0.625 × 0.625 × 0.65 mm; 160 mm field of view (FOV); Flip Angle (FA): 30 degrees; Pixel Bandwidth (PB): 140 Hz/pixel); a multi-echo spin echo (MESE) T2 mapping sequence (TR/TE: 2080/18–90 ms (5 echoes); VS: 4 × 0.78 × 0.78 mm; FOV: 200 mm; FA: 180 degrees; PB: 230 Hz/pixel) and a MESE T2* mapping sequence (TR/TE: 873/3.82–19.1 ms (5 echoes); VS: 3 × 0.625 × 0.625 mm; FOV: 160 mm; FA: 25 degrees; PB: 250 Hz/pixel).AssessmentAutomated cartilage segmentation and quantitative analysis provided T2 and T2* data from test-retest MR examinations to assess immediate reliability.Statistical testsCoefficient of variation (CV) and intraclass correlations (ICC_{2, 1}) to analyse automated T2 and T2* mapping reliability focusing on the clinically important superior cartilage regions of the hip joint.ResultsComparisons between test-retest T2 and (T2*) data revealed mean CV's of 3.385% (1.25%), mean ICC_{2, 1}′s of 0.871 (0.984) and median mean differences of −1.139ms (+0.195ms).ConclusionThe T2 and T2* times from automated analyses of hip cartilage from test-retest MR examinations had high (T2) and excellent (T2*) immediate reliability.     

Pulsed laser CVD investigations of single-wall carbon nanotube growth dynamics

The nucleation and rapid growth of single-wall carbon nanotubes (SWNTs) were explored by pulsed-laser assisted chemical vapor deposition (PLA-CVD). A special high-power, Nd:YAG laser system with tunable pulse width (>0.5 ms) was implemented to rapidly heat (>3×10⁴°C/s) metal catalyst-covered substrates to different growth temperatures for very brief (sub-second) and controlled time periods as measured by in situ optical pyrometry. Utilizing growth directly on transmission electron microscopy grids, exclusively SWNTs were found to grow under rapid heating conditions, with a minimum nucleation time of >0.1 s. By measuring the length of nanotubes grown by single laser pulses, extremely fast growth rates (up to 100 microns/s) were found to result from the rapid heating and cooling induced by the laser treatment. Subsequent laser pulses were found not to incrementally continue the growth of these nanotubes, but instead activate previously inactive catalyst nanoparticles to grow new nanotubes. Localized growth of nanotubes with variable density was demonstrated through this process and was applied for the reliable direct-write synthesis of SWNTs onto pre-patterned, catalyst-covered metal electrodes for the synthesis of SWNT field-effect transistors.     

Optimization of ultrasound-assisted extraction of bioactive compounds from wild garlic (Allium ursinum L.)

Ultrasound-assisted extraction was used for extraction of bioactive compounds and for production of Allium ursinum liquid extract. The experiments were carried out according to tree level, four variables, face-centered cubic experimental design (FDC) combined with response surface methodology (RSM). Temperature (from 40 to 80 °C), ethanol concentration (from 30% to 70%), extraction time (from 40 to 80 min) and ultrasonic power (from 19.2 to 38.4 W/L) were investigated as independent variables in order to obtain the optimal conditions for extraction and to maximize the yield of total phenols (TP), flavonoids (TF) and antioxidant activity of obtained extracts. Experimental results were fitted to the second order polynomial model where multiple regression and analysis of variance were used to determine the fitness of the model and optimal condition for investigated responses. The predicted values of the TP (1.60 g GAE/100 g DW), TF (0.35 g CE/100 g DW), antioxidant activity, IC₅₀ (0.71 mg/ml) and EY (38.1%) were determined at the optimal conditions for ultrasound assisted extraction: 80 °C temperature, 70% ethanol, 79.8 min and 20.06 W/L ultrasonic power. The predicted results matched well with the experimental results obtained using optimal extraction conditions which validated the RSM model with a good correlation.     

Optimization of ultrasonic cell grinder extraction of anthocyanins from blueberry using response surface methodology

Ultrasonic cell grinder extraction (UCGE), using water as the solvent, was firstly applied to extract anthocyanins from blueberry. Extraction yield was related with four variables, including ratio of solution to solid, extraction power, buffer time, and extraction time. On the basis of response surface methodology (RSM), the optimal conditions were determined to be the ratio of solution to solid as 25:1 (mL/g), the extraction power as 1500 W, the buffer time as 3.0 s, and the extraction time as 40 min. The experimental yield of anthocyanins using UCGE was 2.89 mg/g higher than that of conventional ultrasound-assisted extraction (CUAE). This study indicated that UCGE was an innovative, efficient, and environment friendly method in ultrasonic extraction fields, and had a potential to effectively extract other bioactive constituents.     

Influence of ultrasonic amplitude,temperature, time and solvent concentration on bioactive compounds extraction from propolis

An ultrasound assisted method was investigated to extract bioactive compounds from propolis. This method was based on a simple ultrasound treatment using ethanol as an extraction medium to facilitate the disruption of the propolis cells. Four different variables were chosen for determining the influence on the extraction efficiency: ultrasonic amplitude, ethanol concentration, temperature and time; the variables were selected by Box-Behnken design experiments. These parameters were optimised in order to obtain the highest yield, and the results exhibited the optimum conditions for achieving the goal as 100% amplitude of ultrasonic treatment, 70% solvent concentration, 58 °C and 30 min. The extraction yield under modified optimum extraction conditions was, as follows: 459.92 mg GAE/g of TPC, 220.62 mg QE/g of TFC and 1.95% of balsam content. The results showed that the ultrasound assisted extraction was suitable for bioactive compounds extraction from propolis. The most abundant phenolic compound was kaempferol (228.8 mg/g propolis) followed by myricetin (115.5 mg/g propolis), luteolin (27.2 mg/g propolis) and quercetin (25.2 mg/g propolis).     

Ultrasound-assisted extraction of functional compound from mulberry (Morus alba L.) leaf using response surface methodology and effect of microencapsulation by spray drying on quality of optimized extract

This study aimed to optimize the ultrasound-assisted extraction (UAE) condition of mulberry leaf extract (MLE) using response surface methodology and to microencapsulate MLE by spray drying using different coating materials and ratios of coating material and MLE. The extraction results showed that MLE from condition of 60 °C (X₁, temperature), 30 min (X₂, time) and 60% v/v (X₃, ethanol concentration) exhibited the highest bioactive compound and antioxidant activity (DPPH and FRAP assay). Based on this optimal condition, MLE was further encapsulated by spray drying. It was found that MLE encapsulated with resistant maltodextrin at ratio of MLE and resistant maltodextrin 1:1 (w/w) showed the highest encapsulation yield (%) and encapsulation efficiency (%). Water solubility, moisture content and water activity were non-significant (p > 0.05) among the microcapsules. The scanning electron microscope (SEM) revealed that the types of coating material affected their microstructures and microcapsules prepared by resistant maltodextrin as coating material had a spherical shape, smooth surface and less shrinkage than microcapsules prepared by maltodextrin and gum arabic which had rough surfaces. The highest antioxidant activity was obtained from microcapsule prepared by gum arabic at ratio of MLE and gam arabic 1:2 (w/w). In conclusion, optimal condition from UAE and encapsulation by spray drying suggest the critical potential for production of functional food with improved bioactive compound stability and maximized antioxidant activity.     

Combined of ultrasound irradiation with high hydrostatic pressure (US/HHP) as a new method to improve immobilization of dextranase onto alginate gel

In this research work, dextranase was immobilized onto calcium alginate beads by the combination of ultrasonic irradiation and high hydrostatic pressure (US/HHP) treatments. Effects of US/HHP treatments on loading efficiency and immobilization yield of dextranase enzyme onto calcium alginate beads were investigated. Furthermore, the activities of immobilized enzymes prepared with and without US/HHP treatments and that prepared with ultrasonic irradiation (US) and high hydrostatic pressure (HHP), as a function of pH, temperature, recyclability and enzyme kinetic parameters, were compared with that for free enzyme. The maximum loading efficiency and the immobilization yield were observed when the immobilized dextranase was prepared with US (40 W at 25 kHz for 15 min) combined with HHP (400 MPa for 15 min), under which the loading efficiency and the immobilization yield increased by 88.92% and 80.86%, respectively, compared to immobilized enzymes prepared without US/HHP treatment. On the other hand, immobilized enzyme prepared with US/HHP treatment showed V_max, K_M, catalytic and specificity constants values higher than that for the immobilized enzyme prepared with HHP treatment, indicated that, this new US/HHP method improved the catalytic kinetics activity of immobilized dextranase at all the reaction conditions studied. Compared to immobilized enzyme prepared either with US or HHP, the immobilized enzymes prepared with US/HHP method exhibited a higher: pH optimum, optimal reaction temperature, thermal stability and recyclability, and lower activation energy, which, illustrating the effectiveness of the US/HHP method. These results indicated that, the combination of US and HHP treatments could be an effective method for improving the immobilization of enzymes in polymers.     

Optimization and kinetic study of ultrasound assisted deep eutectic solvent based extraction: A greener route for extraction of curcuminoids from Curcuma longa

The use of deep eutectic solvents (DESs) as a new extraction medium is a step towards the development of green and sustainable technology. In the present study, nine DESs based on choline chloride acids, alcohols, and sugar were screened to study the extraction of curcuminoids from Curcuma longa L. Choline chloride and lactic acid DES at 1:1 M ratio gave the maximum extent of extraction. Further, DES based extraction was intensified using ultrasound. The impact of various process parameters such as % (v/v) water in DES, % (w/v) solid loading, particle size, ultrasound power intensity, and pulse mode operation of ultrasound was studied. The maximum curcuminoids yield of 77.13 mg/g was achieved using ultrasound assisted DES (UA-DES) based extraction in 20% water content DES at 5% solid loading and 0.355 mm particle size with 70.8 $W/{\mathit{cm}}^2$ power intensity and 60% (6 sec ON and 4 sec OFF) duty cycle at 30 ± 2 °C in 20 min of irradiation time. Kinetics of UA-DES extraction was explained using Peleg’s model and concluded that it is compatible with the experimental data. Additionally, anti-solvent (water) precipitation technique was applied, which resulted in 41.97% recovery of curcuminoids with 82.22% purity from UA-DES extract in 8 h of incubation at 0 °C. The comparison was made between conventional Soxhlet, batch, DES and UA-DES based processes on the basis of yield, time, solvent requirement, temperature, energy consumption, and process cost. The developed UA-DES based extraction can be an efficient, cost effective, and green alternative to conventional solvent extraction for curcuminoids.     

Investigation on ultrasound-assisted extraction of salvianolic acid B from Salvia miltiorrhiza root

It is reported that salvianolic acid B, a bioactive phenolic compound contained in the root of Salvia miltiorrhiza, exhibits a much stronger activity in free radical scavenging and antioxidance than those of vitamin E. When a conventional refluxing method is adopted to extract salvianolic acid B from the root, in which the materials are subjected to higher temperature and longer time, the yield of this phenolic compound is lower due to the possibility of its hydrolysis to tanshinol. However, a higher extraction yield can be achieved over a shorter time period and lower temperature when an ultrasound-assisted extraction method is used. This paper investigated the parameters influencing the extraction of salvianolic acid B. Factors such as extraction time, frequency of the ultrasound, the ratio of solvent to material, and types of extraction solvent were examined. A comparison was also conducted between conventional refluxing and ultrasound-assisted extraction. Results showed that the optimal parameters to extract salvianolic acid B from the root of S. miltiorrhiza were as follows: ultrasonic frequency: 45 Hz; solvent: 60% aqueous ethanol; extraction temperature: 30 °C; extraction time duration: 25 min.; ratio of solvent to material: 20:1 (v/w, ml/g). Under these conditions, the yield of salvianolic acid B was 5.17 mg/g (33.93 mg/g) higher than those with conventional refluxing method (28.76 mg/g), indicating that the efficiency and the yield of ultrasound-assisted extraction method are higher than reflux method, and the hydrolysis of salvianolic acid B to tanshinol is effectively avoided.     

Sonocatalytic removal of ibuprofen and sulfamethoxazole in the presence of different fly ash sources

We examined the feasibility of using two types of fly ash (an industrial waste from thermal power plants) as a low-cost catalyst to enhance the ultrasonic (US) degradation of ibuprofen (IBP) and sulfamethoxazole (SMX). Two fly ashes, Belews Creek fly ash (BFA), from a power station in North Carolina, and Wateree Station fly ash (WFA), from a power station in South Carolina, were used. The results showed that >99% removal of IBP and SMX was achieved within 30 and 60 min of sonication, respectively, at 580 kHz and pH 3.5. Furthermore, the removal of IBP and SMX achieved, in terms of frequency, was in the order 580 kHz > 1000 kHz > 28 kHz, and in terms of pH, was in the order of pH 3.5 > pH 7 > pH 9.5. WFA showed significant enhancement in the removal of IBP and SMX, which reached >99% removal within 20 and 50 min, respectively, at 580 kHz and pH 3.5. This was presumably because WFA contains more silicon dioxide than BFA, which can enhance the formation of OH radicals during sonication. Additionally, WFA has finer particles than BFA, which can increase the adsorption capacity in removing IBP and SMX. The sonocatalytic degradation of IBP and SMX fitted pseudo first-order rate kinetics and the synergistic indices of all the reactions were determined to compare the efficiency of the fly ashes. Overall, the findings have showed that WFA combined with US has potential for treating organic pollutants, such as IBP and SMX, in water and wastewater.