外压下VN相变和力学性质的第一性原理研究

运用基于赝势平面波基组的密度泛函程序VASP并结合Quantum ESPRESSO,Phonopy软件包对压力下VN的结构、力学性质、声子色散关系进行了第一性原理的研究.分别对NaCl型（B1）,CsCl型（B2）,WC型（Bh）三种构型的VN进行了计算,三种结构的体积能量曲线、焓压关系和声子谱表明在常压下六角WC结构与立方结构相比更稳定.随着压力增加VN由Bh结构到B1结构的相变点发生在30GPa左右,而B1结构到B2结构的相变点可能发生在150GPa左右.常压下三种结构的VN是力学稳定的,其弹性常数和弹性模量都有随压强的增大而增加的趋势,三者都是脆性材料.B1结构和B2结构坐标基矢方向上的杨氏模量数值与体对角线方向上的差距较大,体现出明显的各向异性.随压力的增加B1结构各向异性程度增大而B2结构各向异性程度减小     

Structural,electronic and mechanical properties of alkaline earth metal oxides MO (M=Be,Mg, Ca,Sr, Ba)

The structural, electronic and mechanical properties of alkaline earth metal oxides MO (M=Be, Mg, Ca, Sr, Ba) in the cubic (B1, B2 and B3) phases and in the wurtzite (B4) phase are investigated using density functional theory calculations as implemented in VASP code. The lattice constants, cohesive energy, bulk modulus, band structures and the density of states are computed. The calculated lattice parameters are in good agreement with the experimental and the other available theoretical results. Electronic structure reveals that all the five alkaline earth metal oxides exhibit semiconducting behavior at zero pressure. The estimated band gaps for the stable wurtzite phase of BeO is 7.2 eV and for the stable cubic NaCl phases of MgO, CaO, SrO and BaO are 4.436 eV, 4.166 eV, 4.013 eV, and 2.274 eV respectively. A pressure induced structural phase transition occurs from wurtzite (B4) to NaCl (B1) phase in BeO at 112.1 GPa and from NaCl (B1) to CsCl (B2) phase in MgO at 514.9 GPa, in CaO at 61.3 GPa, in SrO at 42 GPa and in BaO at 14.5 GPa. The elastic constants are computed at zero and elevated pressures for the B4 and B1 phases for BeO and for the B1 and B2 phases in the case of the other oxides in order to investigate their mechanical stability, anisotropy and hardness. The sound velocities and the Debye temperatures are calculated for all the oxides using the computed elastic constants.     

Structural,mechanical, thermodynamics properties and phase transition of FeVSb

The structural, mechanical, thermodynamics properties and phase transition of FeVSb are investigated extensively using the first principle calculations and the quasi-harmonic Debye model. From the calculated elastic constants of cubic FeVSb, some other mechanical quantities, such as bulk modulus and Poisson's ratio, are drawn. Surprisingly, it is found that almost all these mechanical quantities are larger than those of CoVSb (Bo Kong et al., J. Alloys Compd. 509 (2011) 2611); the obtained corresponding transition pressure from fcc to hcp is also larger than that of CoVSb. For these distinctions, their complete different electronic and magnetic behaviors in their cubic structures may be responsible. However, in their hexagonal structures, atomic configurations are similar in terms of the analysis of both the ground-state structure and enthalpy–pressure curves. It is also shown that the elastic instability of cubic FeVSb does not appear with pressure up to 120 GPa and should not be a reason for the pressure-induced phase transition. In addition, heat capacity, Debye temperatures, and so on are obtained successfully for cubic FeVSb under the quasi-harmonic Debye model. Furthermore, we attempt to explore the phase diagram of FeVSb with the model.     

EuS高压相变及其弹性和热力学性质

采用平面波赝势密度泛函理论,利用第一性原理的方法研究了EuS的晶体结构、高压相变以及弹性性质．计算结果和实验值以及前人利用不同计算模型得到的理论值相吻合．研究了EuS的弹性常数、弹性模量和弹性的各向异性等力学性质随压力变化的趋势．同时研究了泊松比、德拜温度及纵波和横波的弹性波速随压力的变化趋势．基于德拜模型,进而研究了EuS在0～800 K和0～60 GPa下相变前后的热膨胀系数、热熔、Grüneisen参数等热力学性质．     

SrS相变和弹性性质的第一原理计算

利用平面波赝势密度泛函方法和准谐德拜模型研究了SrS从NaCl结构到CsCl结构的相变以及弹性性质.在零温下,我们计算的相变压强为17.9 GPa,这与实验值和其他作者的计算值符合很好.研究还表明:相变压强随温度增加而非线性地增加,然而力学不稳性的压强随温度增加而线性地增加.     

A first-principle study of the structural, elastic, lattice dynamical and thermodynamic properties of PrX (X=P, As)

The structural, phase transition, elastic, lattice dynamic and thermodynamic properties of rare-earth compounds PrP and PrAs with NaCl (B1), CsCl (B2), ZB (B3), WC (B_h) and CuAu (L1₀) structures are investigated using the first principles calculations within the generalized gradient approximation (GGA). For the total-energy calculation, we have used the projected augmented plane-wave (PAW) implementation of the Vienna Ab-initio Simulation Package (VASP). Specifically, some basic physical parameters, e.g. lattice constants, bulk modulus, elastic constants, shear modulus, Young's modulus and Poison's ratio, are predicted. The obtained equilibrium structure parameters are in excellent agreement with the experimental and theoretical data. The temperature and pressure variations of the volume, bulk modulus, thermal expansion coefficient, heat capacity and Debye temperature are calculated in wide pressure and temperature ranges. The phonon dispersion curves and corresponding one-phonon density of states (DOS) for both compounds are also computed in the NaCl (B1) structure.     

Electronic,mechanical, phase transition,and thermo-physical properties of TMC (TM = V,Nb, and Ta): high pressure ab initio study

The structural, electronic, mechanical, phase transition, and thermo-physical properties of refractory carbides, viz. VC, NbC, and TaC have been computed in stable B1 and high pressure B2 phases by means of two different ab initio calculations using pseudo- and full-potential schemes. These materials have mixed covalent-, metallic-, and ionic-type bonding. The calculations of elastic constants show the mechanical stability of these materials in B1 phase only. The brittle nature and anisotropy is observed in these materials in B1 phase. Non-central forces are present in both the phases. Elastic wave velocities and Debye temperature have also been calculated. The present results on structural, phase transition, elastic, and other properties are in reasonably good agreement with the available experimental and theoretical data. The calculations in high pressure phase need experimental verification.     

BCC结构TiCrTaV合金的电子结构及力学性能的第一性原理计算

利用基于密度泛函理论的第一性原理方法计算TiCrTaV多组元合金中两种BCC结构的结构稳定性、力学性能、德拜温度、电子结构和布居分析. 生成焓和内聚能结果表明BCC1的结构稳定性更好,更容易形成. 弹性常数和模量表明BCC1的强度和韧性更强,BCC2的抗剪切能力和刚度更好,两种结构均具有弹性各向异性. 德拜温度和Grüneisen参数结果表明BCC2的键合强度和热稳定性更好. 电子结构和布居分析表明两种结构均包含共价键和金属键. Ta原子形成的共价键强度更大,金属键仅存在于Ti、Cr和V原子之间. 元素成键后Ti和V原子失去电子,Cr和Ta原子得到电子.     

氢化铒高温高压下的弹性及热力学性质

利用第一性原理平面波赝势密度泛函理论, 并结合准谐德拜模型, 计算了立方萤石结构ErH2在不同温度和压强下的体积、热膨胀系数、体弹模量和等体热容等弹性性质及热力学性质。在温度高于1 100 K的条件下,计算出的等体热容趋近于Dulong-Petit极限。得到了绝对零度、零压强下ErH2的该结构的晶格常数为0.523 2 nm,与实验值0.523 0 nm非常接近。由不同的原胞体积得出了该体系的单点能与原胞体积的关系的数据;从计算出的高压下的弹性常数,根据立方晶系的力学稳定性条件,推断出立方萤石结构ErH2的相变压力约为20 GPa。     

Elastic and thermodynamic properties of alkali hydrides XH (X = K,Rb and Cs)

The calculation of the structural, mechanical and thermodynamic properties of the alkali hydrides XH (X?=?K, Rb and Cs) in rock-salt (RS), cesium chloride (CsCl), zinc-blende (ZB) and wurtzite (WZ) phases are done by using the full-potential linearized augmented plane wave (FP-LAPW) method within the frame work of the density functional theory (DFT) as implemented in the WIEN2K code. The Perdew–Burke–Ernzerhof generalized gradient approximation (PBE-GGA) was used for the exchange-correlation potential.The elastic constants and their related properties, as well as the thermodynamic properties, were obtained by using the IRelast package. The calculated elastic constants for the alkali hydrides, with the four structures RS, CsCl, ZB and WZ, at ambient pressure are mechanically stable. The elastic constants and their related properties in the RS structure are changeable with increasing pressure. Elastic constants, bulk modulus, shear modulus (stiffness) and Debye temperatures of these compounds are decreased as going from K to Cs in the periodic table. These compounds in the RS structure are mechanically stronger at ambient conditions.     

First-principles lattice dynamical study of ScAs and ScSb at zero and high pressure

A first-principles pseudopotential method is used to investigate the structural and elastic properties of ScAs and ScSb in their ambient B1(NaCl) and in high pressure B2 (CsCl) phases and phonon structures at zero and close to phase transition pressure. The calculated lattice constants, static bulk modulus, first order pressure derivative of the bulk modulus and the elastic constants are reported in B1 and B2 structures and compared with available experimental and other theoretical results. The phonon properties of these two compounds are compared among themselves which reveal that these compounds are predominantly metallic, due to degeneracy of optical frequencies at the zone centre. At high pressure, near the B1 to B2 transition, the LA mode at X-point softens leading to structural instability.     

First-Principle Calculations for Transition Phase and Elastic Properties of SrS

The transition phase and elastic properties of SrS from NaCl structure （B1） to CsCl structure （B2） are investigated by ab initio plane-wave pseudopotential density functional theory method and by the quasi-harmonic Debye model. The transition pressure varies non-linearly with temperature, and the pressure of the mechanical instability increases linearly with increasing temperature. It is shown that the B1 structure SrS is a most elastically anisotropic minerat any pressure. The Debye temperature, the heat capacity, thermal expansion and Gruneisen parameter over a wide range of pressures and temperatures are also obtained.     

Theoretical study of the structural phase transition and elastic properties of HfN under high pressures

The effect of hydrostatic pressure on the structures of HfN at 0 K was investigated by using the projector augmented wave (PAW) within the Perdew–Burke–Ernzerhof (PBE) form of the generalized gradient approximation (GGA). The transition pressure between NaCl (B1) and CsCl (B2) structures is predicted to be 277.3 GPa. This value is consistent with that reported by Kroll, while in contrast to the results obtained by Ojha et al. and Meenaatci et al. Moreover, the elastic properties of B1-HfN and B2-HfN under high pressures are successfully obtained. It is found that the elastic constants, bulk modulus B, shear modulus G, compressional and shear wave velocities increase monotonically with increasing pressure. The Debye temperature Θ calculated from the elastic constants of HfN is in good agreement with the experimental values. The anisotropies of B1-HfN and B2-HfN at zero pressure have also been discussed.     

高压下硫化钙的弹性和热力学性质的第一性原理计算

利用基于密度泛函理论的第一性原理平面波赝势方法结合准谐德拜模型研究NaCl结构的CaS在高压下的弹性和热力学性质.计算得到的零温零压下的晶格常数、体弹模量与实验值符合得很好.弹性常数和弹性模量随着压强的增大而增大.压强对体弹模量和热膨胀系数的影响大于温度的影响.热容随压强的升高而降低,在高温下热容接近于Dulong-Petit极限.通过求解Gibbs自由能计算得到B1结构和B2结构CaS的相变压为36.61 GPa.     

Mechanical,electronic and thermodynamic properties of TE-C36 under high pressure

The structural parameters, mechanical, electronic and thermodynamic properties of TE-C36 under high pressure were calculated via the density functional theory in combination with the quasi-harmonic Debye model. The results show that the pressure has significant effects on the equilibrium structure parameters, mechanical, electronic and thermodynamic properties of TE-C36. The obtained ground state structural parameters are in good agreement with previous theoretical results. The mechanically and dynamically stable under pressure were confirmed by the calculated elastic constants and phonon dispersion spectra. The elastic constants, elastic modulus, B/G ratio, Poisson’s ratio and Vicker’s hardness were determined in the pressure range of 0–100?GPa. The elastic anisotropy of TE-C36 under pressure are also determined in detail. The electronic structure calculations reveal that TE-C36 remains a direct band gap semiconductor when the pressure changes from 0 to 100?GPa, and the band gap decreases with increasing pressure. Furthermore, the pressure and temperature dependence of thermal expansion coefficient, heat capacity and Debye temperature are predicted in a wide pressure (0–90?GPa) and temperature (0–2500?K) ranges. The obtained results are expected to provide helpful guidance for the future synthesis and application of TE-C36.     

铜钨合金高温高压性质的第一性原理研究

采用基于密度泛函理论的第一性原理方法,研究了三种不同比例铜钨合金(Cu3W,Cu W,Cu W3)的基态及高温、高压下的电子结构、弹性性质和热力学性质.弹性常数计算结果表明Cu3W为结构不稳定相,Cu W和Cu W3为结构稳定相,与声子色散曲线得到的结论一致.通过对态密度的分析,发现随压强的增大,金属键键能增大,并且态密度有向深能级移动的趋势.通过准简谐德拜模型和准简谐近似模型分别计算、分析和对比了三种铜钨合金在不同温度和压强下的体弹模量、热膨胀系数、德拜温度和比热容.     

Structural stability,electronic structure and mechanical properties of 4d transition metal nitrides TMN (TM=Ru,Rh, Pd)

Ab initio calculations are performed to investigate the structural stability, electronic, structural and mechanical properties of 4d transition metal nitrides TMN (TM=Ru, Rh, Pd) for five different crystal structures, namely NaCl, CsCl, zinc blende, NiAs and wurtzite. Among the considered structures, zinc blende structure is found to be the most stable one among all three nitrides at normal pressure. A structural phase transition from ZB to NiAs phase is predicted at a pressure of 104 GPa, 50.5 GPa and 56 GPa for RuN, RhN and PdN respectively. The electronic structure reveals that these nitrides are metallic. The calculated elastic constants indicate that these nitrides are mechanically stable at ambient condition.     

MgO高温高压特性及相变的第一性原理研究

应用第一性原理密度泛函理论计算了MgO在零温(0K)下和0~200GPa静水压范围内的晶体结构和弹性模量,以及B1、B4和B8相结构的MgO的声速随压力的变化。利用准简谐近似下的Debye模型,通过拟合三阶Birch-Murnaghan物态方程模拟了高温效应并对三个相在高温高压下的相稳定性做了研究。本工作的计算结果与前人的理论和实验结果符合较好,说明第一性原理结合准简谐Debye模型能够比较准确的模拟矿物如MgO在高温高压下的热力学性质。     

MgO高温高压特性及相变的第一性原理研究

应用第一性原理密度泛函理论计算了MgO在零温(0K)下和0~200GPa静水压范围内的晶体结构和弹性模量,以及B1、B4和B8相结构的MgO的声速随压力的变化。利用准简谐近似下的Debye模型,通过拟合三阶Birch-Murnaghan物态方程模拟了高温效应并对三个相在高温高压下的相稳定性做了研究。本工作的计算结果与前人的理论和实验结果符合较好,说明第一性原理结合准简谐Debye模型能够比较准确的模拟矿物如MgO在高温高压下的热力学性质。     

Ab initio calculation of the phase stability,mechanical properties and electronic structure of ZrCr2 Laves phase compounds

Ab initio calculations have been used to investigate the phase stability, mechanical properties and electronic structure of ZrCr₂ Laves phase compounds, based on the method of augmented plane waves plus local orbitals with the generalized gradient approximation. The calculated lattice constants for the C15, C36 and C14 structures are in good agreement with experimental values. The calculation of heats of formation showed that C15 is a ground-state phase, whereas C36 is an intermediate phase and C14 the high-temperature phase. The elastic constants and elastic moduli for the C15 structure were calculated systematically and compared with experiments and previous theoretical calculations. The intrinsic and extrinsic stacking fault energies are found to be 112 and 98?mJ?m^?2, respectively. The equilibrium separations between Schockley are also predicted using the calculated elastic moduli and stacking fault energies. Finally, the calculated electronic structures of these Laves phases are discussed based on these results.