Ab initio calculations of B<Subscript>2</Subscript> type RHg (R = Ce,Pr, Eu and Gd) intermetallic compounds

Spin polarized ab initio calculations have been carried out to study the structural, electronic, elastic and thermal properties of RHg (R = Ce, Pr, Eu and Gd) intermetallic compounds in B₂ structure. The calculations have been performed by using both generalized gradient approximation (GGA) and local spin density approximation (LSDA). The calculated value of lattice constant (a ₀) for these compounds with GGA is in better agreement with the experimental data than those with LSDA. Bulk modulus (B), first-order pressure derivative of bulk modulus and magnetic moment (μ _B ) are also presented. The energy band structure and electron density of states show the occupancy of 4f states for light as well as heavy rare earth atom. The elastic constants are predicted from which all the related mechanical properties like Poisson’s ratio (σ), Young’s modulus (E), shear modulus (G _H ) and anisotropy factor (A) are calculated. The ductility or brittleness of these compounds is predicted from Pugh’s rule (B/G _H ) and Cauchy pressure (C ₁₂ ? C ₄₄). The Debye temperature (θ _D ) is estimated from the average sound velocity, which have not been calculated and measured yet.     

Structural,mechanical and thermal properties of some Holmium Pnictides under pressure: A theoretical approach

The high pressure structural, elastic and thermal properties of holmium pnictides HoX (X=N, P, As and Bi) were investigated theoretically by using an inter-ionic potential theory with modified ionic charge parameter. We have predicted a structural phase transition from NaCl (B₁) to CsCl (B₂)-type structure at pressure of 139 GPa for HoN, 52 GPa for HoP, 44 GPa for HoAs and 26 GPa for HoBi. Other properties, such as lattice constant, bulk modulus, cohesive energy, second and third-order elastic constants were calculated and compared with the available experimental and theoretical data. In order to gain further information the brittle behaviour of these compounds was observed. Some other properties like Shear modulus (G), Young's modulus (E), Poisson's ratio (ν), anisotropy factor (A), sound velocities, Debye temperature (θ_D) were calculated. The variation of elastic constants (C₁₁ and C₄₄) and Debye temperature (θ_D) with pressure was also presented.     

The first principles study on the Boron antimony compound

We present the results of our calculations on Boron antimony (BSb) compound in zinc-blende (ZB) and rock-salt (RS) structures by performing ab initio calculations within the local density approximation (LDA). Some basic physical properties, such as lattice constant, bulk modulus, cohesive energy, phase transition pressure, second-order elastic constants (C_ij), phonon frequencies, and some band structural parameters are calculated and compared with those obtained with other recent theoretical works. In order to further understand the behaviour of BSb compound, we have also predicted, the pressure-dependent behaviours of the band gap, second-order elastic constants (C_ij), Young's modulus, poison ratios (ν), Anizotropy factor (A), sound velocities, and Debye temperature for this hypothetical compound.     

Ab initio calculations of elastic constants and thermodynamic properties of Li2O for high temperatures and pressures

The elastic constants and thermodynamic properties of Li₂O for high temperatures and pressures are calculated by the ab initio unrestricted Hartree-Fock (HF) linear combination of atomic orbital (LCAO) periodic approach. The lattice constant, elastic constants, Debye temperature, and thermal expansion coefficient obtained are in good agreement with the available experimental data and other theoretical results. It is found that at zero pressure the elastic constants C₁₁, C₁₂ and C₄₄, bulk modulus B and Debye temperature Θ_D decrease monotonically over the wide range of temperatures from 0 to 1100 K. When the temperature , C₁₂ approaches zero, consistently with the transition temperature 1200 K. However, with increasing pressure, they all increase monotonically and the anisotropy will weaken.     

The mechanical,thermodynamic and electronic properties of Al3Nb with DO22 structure: A first-principles study

The lattice constants, elastic properties, electronic structure and thermodynamic properties of Al₃Nb with DO₂₂ structure have been investigated by the first-principles calculation. The calculated lattice constants were consistent with the experimental values, and the structural stability was also studied from the energetic point of view. The single-crystal elastic constants (C_ij) as well as polycrystalline elastic parameters (bulk modulus B, shear modulus G, Young's modulus E, Poisson's ratio υ and anisotropy value A) were calculated, and brittleness of Al₃Nb was discussed in detail. Besides, the electronic structure of tetragonal Al₃Nb was studied, which indicates a mixture of metallic bond and covalent bond in Al₃Nb and reveals the underlying mechanism of the stability and elastic properties of Al₃Nb. Finally, the thermodynamic properties of Al₃Nb were calculated and the physical properties such as heat capacity and Debye temperature were predicted within the quasi-harmonic approximation.     

The elastic and bonding properties of the sulvanite compounds: A first-principles study by local and semi-local functionals

The elastic properties of the compound family of the sulvanite Cu₃TMX₄ (TM=V, Nb, Ta; X=S, Se) have been calculated using first-principles total energy calculations within the density functional theory along with the local density and the generalized gradient approximations. The calculated elastic properties are the bulk modulus (B), the elastic constants (c₁₁, c₁₂ and c₄₄), the Zener anisotropy factor (A), the isotropic shear modulus (G) and the Young modulus (E). By means of these quantities we have also computed other thermodynamic properties such as the average sound velocity (s) and the Debye temperature (Θ_D). The calculated values of the elastic properties led to the conclusion that these compounds are brittle and fragile. We have also calculated the electron localization function, which exhibits the bonding characteristics in these compounds, showing that the Cu-X bond as well as the TM-X bond have a covalent character, but there is also present some ionicity in these compounds due to the Cu-TMX₄ bond.     

Effect of pressure on the elastic properties of silicon carbide

The pressure dependences of the second-order elastic constants C _ij and the velocity of sound in 3C-SiC and 2H-SiC crystals are calculated in the framework of the Keating model. The third-order elastic constants C _ijk for 3C-SiC are determined from the dependences of the second-order elastic constants C _ij on the pressure p.     

Elastic,electronic and thermodynamic properties of fluoro-perovskite KZnF3 via first-principles calculations

The elastic, electronic and thermodynamic properties of fluoro-perovskite KZnF₃ have been calculated using the full-potential linearized augmented plane wave (FP-LAPW) method. The exchange-correlation potential is treated with the generalized gradient approximation of Perdew-Burke-Ernzerhof (GGA-PBE). Also, we have used the Engel and Vosko GGA formalism (GGA-EV) to improve the electronic band structure calculations. The calculated structural properties are in good agreement with available experimental and theoretical data. The elastic constants C _ij are calculated using the total energy variation with strain technique. The shear modulus, Young’s modulus, Poisson’s ratio and the Lamé coefficients for polycrystalline KZnF₃ aggregates are estimated in the framework of the Voigt-Reuss-Hill approximations. The ductility behavior of this compound is interpreted via the calculated elastic constants C _ij . Electronic and bonding properties are discussed from the calculations of band structure, density of states and electron charge density. The thermodynamic properties are predicted through the quasi-harmonic Debye model, in which the lattice vibrations are taken into account. The variation of bulk modulus, lattice constant, heat capacities and the Debye temperature with pressure and temperature are successfully obtained.     

A first principles study of cubic IrO<Subscript>2</Subscript> polymorph

We have studied structural, thermodynamic, elastic, and electronic properties of cubic IrO₂ polymorph via ab initio calculations within the LDA and GGA approximations. Basic physical properties, such as lattice constant, bulk modulus, second-order elastic constants (C_ij), and the electronic band structures are calculated, and compared with available experimental values. We have, also, predicted the Young's modulus, Poison's ratio (ν), Anisotropy factor (A), sound velocities, and Debye temperature.     

Ab-initio study of structural,elastic, thermal,electronic and magnetic properties of quaternary Heusler alloys CoMnCrZ (Z = Al,As, Si,Ge)

First-principles approach is used to study the structural, electronic and magneticproperties of CoMnCrZ (Z = Al,Si, Ge and As) quaternary Heusler compounds, using full-potential linearized augmentedplane wave (FP-LAPW) scheme within the generalized gradient approximation (GGA). Thecomputed equilibrium lattice parameters agree well with the available theoretical data.The obtained negative formation energy shows that CoMnCrZ (Z = Al, Si, Ge, As) compounds have strongstructural stability. The elastic constants C _ij are calculatedusing the total energy variation with strain technique. The polycrystalline elastic moduli(namely: the shear modulus, Young’s modulus, Poisson’s ratio, sound velocities, Debyetemperature and melting temperature were derived from the obtained single-crystal elasticconstants. The ductility mechanism for the studied compounds is discussed via the elasticconstants C _ij . Our calculationswith the GGA approximation predict that CoMnCrGe, CoMnCrAl, CoMnCrSi and CoMnCrAs arehalf-metallic ferrimagnets (HMFs) with a half-metallic gap E _HM of 0.03 eV, 0.19 eV,0.34 eV and 0.50 eV for, respectively. We also find that the half-metallicity ismaintained on a wide range of lattice constants.     

Elastic and thermodynamic properties of CaB6 under pressure from first principles

The elastic and thermodynamic properties of CsCl-type structure CaB₆ under high pressure are investigated by first-principles calculations based on plane-wave pseudopotential density functional theory method within the generalized gradient approximation (GGA). The calculated lattice parameters of CaB₆ under zero pressure and zero temperature are in good agreement with the existing experimental data and other theoretical data. The pressure dependences of the elastic constants, bulk modulus B (GPa), and its pressure derivative B′, shear modulus G, Young's modulus E, elastic Debye temperature Θ_B, Zener's anisotropy parameter A, Poisson ratios σ, and Kleinmann parameter ζ are also presented. An analysis for the calculated elastic constants has been made to reveal the mechanical stability of CaB₆ up to 100 GPa. The thermodynamic properties of the CsCl-type structure CaB₆ are predicted using the quasi-harmonic Debye model. The pressure-volume-temperature (P-V-T) relationship, the variations of the heat capacity C_V, Debye temperature Θ_D, and the thermal expansion α with pressure P and temperature T, as well as the Grüneisen parameters γ are obtained systematically in the ranges of 0-100 GPa and 0-2000 K.     

An examination of the structural,electronic, elastic,vibrational and thermodynamic properties of Ru2YGa (Y = Sc,Ti and V) Heusler alloys

The structural, electronic, elastic, vibrational and thermodynamic properties of the Ru₂YGa (Y = Sc, Ti and V) Heusler alloys in L2₁ type cubic structure have been analyzed systematically using first principles density functional theory (DFT) together with the Generalized Gradient Approximation (GGA) method. The values of calculated lattice constant (a₀), elastic constants (Cij), Bulk modulus (B), Shear modulus (G), ratios of B/G, Young's modulus (E) and Poisson ratio (ν) are in good agreement with the available theoretical and experimental results. The electronic band structures, corresponding total and partial density of states have also been obtained. The calculated band structures demonstrate that Ru2YGa (Y = Sc, Ti and V) alloys are metallic. The phonon dispersion curves, total and partial density of states of these alloys have been computed for the first time by adopting the direct method. It is considered that all alloys are dynamically stable in L2₁ structure.     

Running mass m s at low scale from the heavy-light meson decay constants

It is shown that a 25(20)% difference between the decay constants $f_{D_s } $ ( $f_{B_s} $ ) and f _D (f _B ) occurs due to large differences in the pole masses of the s and d(u) quarks. The values η _D = $f_{D_s } $ /f _D ～ 1.23(15), recently observed in the CLEO experiment, and η _B = $f_{B_s } $ /f _B ～ 1.20, obtained in unquenched lattice QCD, can be reached only if, in the relativistic Hamiltonian the running mass, m _s at low scale is m _s (～0.5 GeV) = 170–200 MeV. Our results follow from the analytical expression for the pseudoscalar decay constant f _P based on the path-integral representation of the meson Green’s function.     

First-principles investigations on elastic, phonon and thermodynamic properties of SrB6 under pressure

The elastic, phonon and thermodynamic properties of the divalent alkaline-earth hexaboride SrB₆ are investigated by using plane-wave pseudopotential density functional theory method. The calculated structure parameters and bulk modulus are well consistent with the available experiment and theoretical data. The pressure dependences of elastic constants C_ij, bulk modulus B₀, shear modulus G, Young's modulus E and Poisson's ratio σ are also presented. With these elastic parameters, we investigate the mechanical stability and compressibility of SrB₆. For the thermodynamic properties, both phonon and quasi-harmonic Debye model methods are adopted. Through the comparison with experimental and other theoretical results, we found the method of quasi-harmonic Debye model is a little better. Moreover, the phonon dispersion relations are also obtained. It is found that there are two LO/TO splitting around 5 THz and 26 THz, respectively.     

Theoretical investigation of new type of ternary magnesium alloys AMgNi4 (A=Y,La, Ce,Pr and Nd)

New ternary magnesium alloys AMgNi₄ (A=Y, La, Ce, Pr and Nd) have been studied by First-Principles calculations within the generalized gradient approximation. The optimized structural parameters were in good agreement with the available experimental data. The calculated cohesive energies and formation enthalpies showed that these alloys had strong structural stability. Then the elastic constants C_ij of these AMgNi₄ alloys were calculated, and the bulk modulus B, shear modulus G, Young's modulus E, Poisson's ratio ν and anisotropy value A of polycrystalline materials were derived from the elastic constants, the related mechanical properties were further discussed. The electronic structures were also calculated to reveal the underlying mechanism for the structural stability and the elastic property.     

Two-Channel Effective Range Expansion and Bound-State Properties

The S matrix and the f matrix amplitudes are considered for the case of two coupled elastic scattering channels, which differ in values of orbital angular momenta. Matrix elements of S and f matrices are parametrized in terms of scattering phases ?? _i (i?=?1, 2) and a mixing parameter ${\epsilon}$ and are expressed in terms of matrix elements c _ij = (K ^?1) _ij where K is the reaction K matrix. Quantities ${g_{ij}(k)=k^{l_i+l_j+1}c_{ij}(k)}$ are expanded in powers of k ², k being the relative momentum of colliding particles B and C. Then functions g _ij (k) and c _ij (k) are continued analytically to the pole of amplitudes f _ij corresponding to the bound state A of colliding particles. This procedure allows to get the position of the pole as well as the residues of amplitudes f _ij at that pole which are related directly to vertex constants and asymptotic normalization coefficients corresponding to the vertex A ?? B?+?C.     

Electro-optical properties of strontium-barium niobate crystals and their relation to the domain structure of the crystals

The electro-optical coefficients r _ij and half-wave voltage V_λ/2 of strontium-barium niobate crystals poled in the ferroelectric phase are shown to vary along the polar axis. The r _ij (z) and V_λ/2(z) dependences indicate the presence of a residual domain density D(z) and clearly depend on the sign of the polarizing field, with r _ij being minimum (D being maximum) near the negative electrode. This character of the D(z) distribution and, hence, the r _ij (z) and V_λ/2(z) coordinate dependences can be explained by predominant domain nucleation near the negative electrode, which is revealed when the switching processes are studied using 90° (Rayleigh) light scattering from domain walls.     

Phenomenological implications of light stop and higgsinos

We examine the phenomenological implications of light $\tilde t_R $ and higgsinos in the Minimal Supersymetric Standard Model, assuming tan² ??<m _t m _b and heavy $\tilde t_L $ and gauginos. In this simplified setting, we study the contributions to ??m _{B d},?? _K,BR(b??s??),R _b???(Z??bb) /??(Z??hadrons),BR(t??bW), and their interplay.     

First-principles study of the structural,elastic, mechanical,electronic, and optical properties of cubic Mg<Subscript>2</Subscript>TiO<Subscript>4</Subscript>

We have performed ab-initio total energy calculations using the plane-wave ultrasoft pseudopotential technique based on the first-principles density-functional theory (DFT) to study structural, elastic, mechanical, electronic, and optical properties of cubic Mg₂TiO₄. The calculated lattice parameter a is in good agreement with the experimental values. The independent elastic constants are calculated. The mechanical properties including bulk, shear and Young’s modulus, Poisson’s coefficient, compressibility and Lamé’s constants are obtained using the Voigt-Reuss-Hill method. Debye temperature is estimated using the Debye-Grüneisen model. Band structure, density of states and charge densities are shown and analyzed. In order to clarify the mechanism of optical transitions of cubic Mg₂TiO₄, the complex dielectric function, refractive index, extinction coefficient, reflectivity, absorption coefficient, loss function and complex conductivity function are calculated.