The mechanical,thermodynamic and electronic properties of Al3Nb with DO22 structure: A first-principles study

The lattice constants, elastic properties, electronic structure and thermodynamic properties of Al₃Nb with DO₂₂ structure have been investigated by the first-principles calculation. The calculated lattice constants were consistent with the experimental values, and the structural stability was also studied from the energetic point of view. The single-crystal elastic constants (C_ij) as well as polycrystalline elastic parameters (bulk modulus B, shear modulus G, Young's modulus E, Poisson's ratio υ and anisotropy value A) were calculated, and brittleness of Al₃Nb was discussed in detail. Besides, the electronic structure of tetragonal Al₃Nb was studied, which indicates a mixture of metallic bond and covalent bond in Al₃Nb and reveals the underlying mechanism of the stability and elastic properties of Al₃Nb. Finally, the thermodynamic properties of Al₃Nb were calculated and the physical properties such as heat capacity and Debye temperature were predicted within the quasi-harmonic approximation.     

Theoretical prediction of structural,elastic and electronic properties of Si-doped TiCuGe intermetallics

The structural, elastic and electronic properties of TiCuGe_1?xSi_x alloys (x = 0, 0.25, 0.5, 0.75 and 1) were investigated by means of first-principles calculations within the framework of density functional theory (DFT). The calculated results demonstrate that the partial substitution of Si with Ge in TiCuGe leads to a decrease of lattice constants, and the optimized structural parameters are in agreement with the available experimental values. The results of electron density are compared with the theoretical and experimental data from the literature. From energetic point of view, it is found that with increase of Si content the structural stability of TiCuGe_1?xSi_x compounds increases apparently. The single-crystal elastic constants are obtained by computing stress–strain function according to Hooke's law, and then the bulk modulus B, shear modulus G, Young's modulus E and Poisson's ratio ν of polycrystalline aggregates are derived. The calculated results show that among the TiCuGe_1?xSi_x alloys, TiCuGe_0.75Si_0.25 exhibited the largest stiffness, while TiCuGe_0.25Si_0.75 showed the best ductility. Finally, the electronic density of states (DOSs) are further studied and discussed.     

First principles studies on the elastic,thermodynamic properties and electronic structure of Ti15−xMoxSn compounds

The structural, elastic, thermodynamic and electronic properties of the Ti_15−xMo_xSn compounds were systematically investigated by means of first-principles calculations based on the density functional theory (DFT). The calculated results demonstrate the Ti_15−xMo_xSn compounds still remain the stable β phase structure. The calculation of cohesive energy shows that the structural stability of the Ti_15−xMo_xSn compounds increases apparently with the increase of Mo content. According to Hooke's law, the single crystal elastic constants were obtained and show that all the calculated compounds keep mechanical stability. Then the bulk modulus B, shear modulus G, Young's modulus E and Poisson's ratio ν of polycrystalline aggregates were calculated at zero pressure. The calculated results show that among these Ti_15−xMo_xSn compounds, Ti₄Mo₁₁Sn exhibits the largest stiffness while Ti₁₂Mo₃Sn shows the greatest ductility. The compounds Ti₁₂Mo₃Sn and Ti₁₁Mo₄Sn with the two lowest elastic Young's modulus of 61.01 GPa and 65.59 GPa are expected to be promising metallic biomaterials for implant applications. Besides, the Debye temperature Θ_D and the electronic density of states (DOS) are also investigated and discussed.     

First-principles investigation of the elastic and electronic properties of the binary intermetallics in the Al–La alloy system

The structural, elastic and electronic properties of Al₂La, AlLa₃ and Al₃La binary intermetallics in the Al–La alloy system were investigated using the first-principles method. The calculated lattice constants were consistent with the experimental values. Formation enthalpy and cohesive energy showed that the studied Al₂La, AlLa₃ and Al₃La all have a higher structural stability, and the alloying ability of Al₂La and Al₃La is stronger than that of AlLa₃. The single-crystal elastic constants (C_ij) as well as polycrystalline elastic parameters (bulk modulus B, shear modulus G, Young's modulus E, Poisson's ratio υ and anisotropy value A) were calculated by the Voigt–Reuss–Hill (V–R–H) approximations, and the relationship of these elastic parameters between Al₂La, AlLa₃ and Al₃La phases were discussed in detail. The results showed that Al₂La and Al₃La which are anisotropic materials are absolutely brittle, while the isotropic AlLa₃ is slightly ductile. Finally, the electronic density of states (DOS) was also calculated to reveal the underlying mechanism of structural stability.     

Ab-initio study of structural,electronic, elastic and mechanical properties of RuAl1−xGax (x=0, 0.25, 0.50, 0.75 and 1)

We have used special quasirandom structure to study the structural, electronic, elastic and mechanical properties of RuAl_1−xGa_x alloys for different compositions (x=0, 0.25, 0.50, 0.75 and 1) using a FP-LAPW method based on Density Functional Theory. The exchange and correlation potential is treated within the generalized gradient approximation. Ground state properties such as lattice constant (a₀), bulk modulus (B), its pressure derivative (B′) and elastic constants are calculated. The ductility of these alloys has been analyzed by calculating the ratio of B/G_H, Cauchy pressure (C₁₂–C₄₄) and Frantsevich rule. From this study RuAl and RuGa are found to be brittle, but their alloys show ductile behavior; RuAl_0.50Ga_0.50 is found to be most ductile. Mechanical properties such as Poisson's ratio (σ), Young's moduli (E), and the ratio of elastic anisotropy factor (A) are estimated. We have also correlated the ductility and bonding behavior of these alloys.     

Pseudo-potential calculations of structural and elastic properties of spinel oxides ZnX2O4 (X=Al,Ga, In) under pressure effect

First principle calculations of structural and elastic properties of ZnAl₂O₄, ZnGa₂O₄ and ZnIn₂O₄ compounds are presented, using the pseudo-potential plane-waves approach based on density functional theory, within the generalized gradient approximation GGA. The lattice constants and internal parameters are in good agreement with the available experimental results. Young's modulus, Poisson ratio, bulk modulus, elastic constants and their pressure dependence are also calculated. As the experimental elastic constants are not available hence our results were only compared with the available theoretical values obtained at equilibrium volume.     

L12型铝合金的结构、弹性和电子性质的第一性原理研究

运用第一性原理方法研究了L1₂型铝合金相Al₃Sc和Al₃Zr的晶体结构、电子结构和弹性.结合能和形成能的计算表明,两种合金具有较强的合金化能力,且Al₃Zr较Al₃Sc具有更强的结构稳定性.电子结构分析表明,费米能级以下较多的价电子数决定了Al₃Zr具有较强的结构稳定性.计算并分析比较了两种合金相的单晶弹性常数（C₁₁,C₁₂和C₄₄）以及多晶弹性模量（体弹性模量B、剪切模量G、杨氏模量Y、泊松比ν和各向异性因子A）.通过对比实验和其他理论计算结果,进一步分析和解释了两种合金相的力学性质. 关键词： 铝合金 第一性原理 结构和电子性质 弹性     

First-principles study on electronic structure and elastic properties of Fe16N2

We have performed first-principles study on structural stability, elastic properties and electronic structure of Fe₁₆N₂ by applying LSDA+U method. The calculated values of formation energy and reaction enthalpy for decomposition reaction indicate that Fe₁₆N₂ is a thermodynamically stable phase at the ground state. The six independent elastic constants are derived and the bulk modulus, Young's modulus, shear modulus, and Poisson's ratio are determined as 180 GPa, 199 GPa, 76 GPa and 0.32, respectively. The elastic constants meet all the mechanical stability criteria. The ductility of Fe₁₆N₂ is predicted by Pugh's criterion. The strong bonding between Fe and N atoms results in high values of elastic constants C₁₁ and C₃₃, and contributes to the strengthening of the Fe₁₆N₂ structural stability. The total and partial densities of states (DOS) suggest the existence of hybridization between N-p and Fe-d bands. The position of the Fermi level in DOS curve implies that Fe₁₆N₂ is a metastable phase.     

First-principles calculations of structural stability and mechanical properties of tungsten carbide under high pressure

The structural stability and mechanical properties of WC in WC-, MoC- and NaCl-type structures under high pressure are investigated systematically by first-principles calculations. The calculated equilibrium lattice constants at zero pressure agree well with available experimental and theoretical results. The formation enthalpy indicates that the most stable WC is in WC-type, then MoC-type finally NaCl-type. By the elastic stability criteria, it is predicted that the three structures are all mechanically stable. The elastic constants C_ij, bulk modulus B, shear modulus G, Young?s modulus E and Poisson?s ratio ν of the three structures are studied in the pressure range from 0 to 100 GPa. Furthermore, by analyzing the B/G ratio, the brittle/ductile behavior under high pressure is assessed. Moreover, the elastic anisotropy of the three structures up to 100 GPa is also discussed in detail.     

An examination of the structural,electronic, elastic,vibrational and thermodynamic properties of Ru2YGa (Y = Sc,Ti and V) Heusler alloys

The structural, electronic, elastic, vibrational and thermodynamic properties of the Ru₂YGa (Y = Sc, Ti and V) Heusler alloys in L2₁ type cubic structure have been analyzed systematically using first principles density functional theory (DFT) together with the Generalized Gradient Approximation (GGA) method. The values of calculated lattice constant (a₀), elastic constants (Cij), Bulk modulus (B), Shear modulus (G), ratios of B/G, Young's modulus (E) and Poisson ratio (ν) are in good agreement with the available theoretical and experimental results. The electronic band structures, corresponding total and partial density of states have also been obtained. The calculated band structures demonstrate that Ru2YGa (Y = Sc, Ti and V) alloys are metallic. The phonon dispersion curves, total and partial density of states of these alloys have been computed for the first time by adopting the direct method. It is considered that all alloys are dynamically stable in L2₁ structure.     

Structural,mechanical and thermal properties of some Holmium Pnictides under pressure: A theoretical approach

The high pressure structural, elastic and thermal properties of holmium pnictides HoX (X=N, P, As and Bi) were investigated theoretically by using an inter-ionic potential theory with modified ionic charge parameter. We have predicted a structural phase transition from NaCl (B₁) to CsCl (B₂)-type structure at pressure of 139 GPa for HoN, 52 GPa for HoP, 44 GPa for HoAs and 26 GPa for HoBi. Other properties, such as lattice constant, bulk modulus, cohesive energy, second and third-order elastic constants were calculated and compared with the available experimental and theoretical data. In order to gain further information the brittle behaviour of these compounds was observed. Some other properties like Shear modulus (G), Young's modulus (E), Poisson's ratio (ν), anisotropy factor (A), sound velocities, Debye temperature (θ_D) were calculated. The variation of elastic constants (C₁₁ and C₄₄) and Debye temperature (θ_D) with pressure was also presented.     

Electronic structure and elastic constants of TiCxN1−x, ZrxNb1−xC and HfCxN1−x alloys: A first-principles study

The structural, electronic and elastic properties of TiC_xN_1−x, Zr_xNb_1−xC and HfC_xN_1−x alloys have been investigated by using the plane-wave pseudopotential method within the density-functional theory. The calculations indicate that the variations of the equilibrium lattice constants and bulk modulus with the composition are found to be linear. The calculated elastic constants C₄₄ and shear constants as a function of alloy concentration reveal the anisotropic hardness of these compounds. The partial and total density of states (DOS) for the binary and ternary compounds had been obtained, and the metallic behavior of these alloys had been confirmed by the analysis of DOS.     

Theoretical study on the phase stability,elasticity, hardness and electronic structures of Ni–P compounds

A systematic investigation concerned with phase stability, elastic properties, hardness and relevant electronic structure of Ni–P compounds (Ni₃P, Ni₁₂P₅, Ni₂P, Ni₅P₄, NiP, NiP₂ and NiP₃) was carried out using first principles calculations. The calculated results show that the Ni–P compounds have strong hardness, ranging from 7.80–14.54 GPa. Also, the hardness values gradually increase with the P content. Electronic structure analysis shows that the strong Ni–P and part of P–P hybrid orbitals play important roles in the hardness of these compounds. The calculated elastic constants indicated that the Ni₃P, Ni₁₂P₅ and NiP₂ phases are significantly anisotropic, the NiP and Ni₂P exhibit some anisotropy, while the Ni₅P₄ and NiP₃ show a relatively isotropic character. At last, the properties of these Ni–P compounds including lattice constants, thermodynamic stability, elastic constants C_ij, bulk modulus B, shear modulus G, Young's modulus E and Poisson's ratio ν have been calculated.     

First-principles study of elastic and electronic properties of layered ternary nitride SrZrN2 under pressure

The structural, elastic, and electronic properties of SrZrN₂ under pressure up to 100?GPa have been carried out with first-principles calculations based on density functional theory. The calculated lattice parameters at 0?GPa and 0?K by using the GGA-PW91-ultrasoft method are in good agreement with the available experimental data and other previous theoretical calculations. The pressure dependence of the elastic constants and the elastic-dependent properties of SrZrN₂, such as bulk modulus B, shear modulus G, Young's modulus E, Debye temperature Θ, shear and longitudinal wave velocity V_S and V_L, are also successfully obtained. It is found that all elastic constants increase monotonically with pressure. When the pressure increases up to 140?GPa, the obtained elastic constants do not satisfy the mechanical stability criteria and a phase transition might has occurred. Moreover, the anisotropy of the directional-dependent Young's modulus and the linear compressibility under different pressures are analysed for the first time. Finally, the pressure dependence of the total and partial densities of states and the bonding property of SrZrN₂ are also investigated.     

Crystal structures,elastic, and lattice dynamical properties of BeB2, NaB2, and CaB2 from the first principles

Based on density functional theory, we have studied the structural stability, elastic, mechanical, and lattice dynamical properties of BeB₂, NaB₂, and CaB₂ compounds in AlB₂, OsB₂, and ReB₂ structures, respectively. Generalized gradient approximation has been used for modeling exchange-correlation effects. Our calculations indicate that ReB₂, AlB₂, and OsB₂ structures are energetically the most stable for BeB₂, NaB₂, and CaB₂ compounds, respectively. The results show that these structures are both mechanically and dynamically stable. The bulk modulus, elastic constants, shear modulus, Young’s modulus, Poisson’s ratio, Debye temperature, sound velocities, and anisotropic factors are also calculated and discussed. Furthermore, the phonon dispersion curves and corresponding phonon density of states are presented. Our structural and some other results are in agreement with the available experimental and theoretical data.     

Structural, elastic and electronic properties of a new ternary-layered Ti2SiN

The structural, elastic and electronic properties of Ti₂SiN were studied by first-principle calculations. The calculated bond lengths of Ti-Si and Ti-C are 2.65 and 2.09 Å, respectively. The results show Ti₂SiN is mechanically stable, and its bulk modulus B, shear modulus G, Young's modulus E, Poisson's ratio μ and anisotropy factor A are determined to be 182 GPa, 118 GPa, 291 GPa, 0.233 and 1.57, respectively. The calculated electronic structure indicates that Ti₂SiN is anisotropic and conductive.     

Theoretical investigations of NiTiSn and CoVSn compounds

The structural, elastic and electronic properties of NiTiSn and CoVSn half-Heusler compounds have been calculated using the full-potential linear muffin-tin orbital (FP-LMTO) method. The computed equilibrium lattice constants are in excellent agreement with the available experimental and theoretical data. The elastic constants C_ij are calculated using the total energy variation with strain technique. The polycrystalline elastic moduli (namely: the shear modulus, Young's modulus, Poisson's ratio, Lamé's coefficients, sound velocities and the Debye temperature) were derived from the obtained single-crystal elastic constants. The ductility mechanism for the studied compounds is discussed via the elastic constants C_ij and their related parameters. The electronic band structure calculations show that the conduction band minimum (CBM) is located at the X point for both compounds, whereas the valence band maximum (VBM) is located at the Г point for NiTiSn and at the L point for CoVSn, resulting in indirect energy band gaps of 0.46 and 0.75 eV for NiTiSn and CoVSn, respectively. The pressure and volume dependences of the energy band gaps have been calculated.     

Determination of elastic constants of Na0.5Bi0.5TiO3 from ab initio calculations

Elastic constants and bulk modulus for the tetragonal, rhombohedral, and cubic phase of Na_0.5Bi_0.5TiO₃ crystal were calculated from the first principles. From the calculated elastic constants, other structural properties such as bulk modulus, shear modulus, Young's modulus, and Poisson's ratio can be derived using respective relationships from Voight–Reuss–Hill approximation; bulk modulus was calculated as an example in this article. It was shown that elastic constants show different behavior for compression and elongation. The different values of elastic constants have been calculated for the direction parallel to the bismuth layer (crystallographic a(b)-axis) and the perpendicular direction (crystallographic c-axis). It seems to be caused by bismuth layer structure oxides of Na_0.5Bi_0.5TiO₃ crystal.     

Elastic and thermodynamic properties of CaB6 under pressure from first principles

The elastic and thermodynamic properties of CsCl-type structure CaB₆ under high pressure are investigated by first-principles calculations based on plane-wave pseudopotential density functional theory method within the generalized gradient approximation (GGA). The calculated lattice parameters of CaB₆ under zero pressure and zero temperature are in good agreement with the existing experimental data and other theoretical data. The pressure dependences of the elastic constants, bulk modulus B (GPa), and its pressure derivative B′, shear modulus G, Young's modulus E, elastic Debye temperature Θ_B, Zener's anisotropy parameter A, Poisson ratios σ, and Kleinmann parameter ζ are also presented. An analysis for the calculated elastic constants has been made to reveal the mechanical stability of CaB₆ up to 100 GPa. The thermodynamic properties of the CsCl-type structure CaB₆ are predicted using the quasi-harmonic Debye model. The pressure-volume-temperature (P-V-T) relationship, the variations of the heat capacity C_V, Debye temperature Θ_D, and the thermal expansion α with pressure P and temperature T, as well as the Grüneisen parameters γ are obtained systematically in the ranges of 0-100 GPa and 0-2000 K.