BPM Simulation and Comparison of 1 × 2 Directional Waveguide Coupling and Y-Junction Coupling Silicon-on-Insulator Optical Couplers

For developing large area opto-electronic silicon-on-insulator (SOI) devices, the optical coupler is a basic key device. In this article, the authors design and simulate 1 2 2 directional waveguide coupling and Y-branch coupling optical couplers based on Unibond SOI rib waveguides. The beam propagation method (BPM) is used for light propagation analysis. The simulation results and comparisons of the two kinds of optical couplers are reported. The S-bend waveguide for attaching to the two kinds of SOI optical coupler is also analyzed by BPM. We find that the directional coupler has lower power loss, but the Y-junction coupler is more wavelength insensitive with the same device size and splitting angle. The fabrication tolerance analysis shows Y-junction coupler has better fabrication characteristics.     

偏振脱敏高隔离度高分子波导分波器设计

提出了一种新的高分子波导分波器结构,用以改善波长串扰以及偏振变动、波长带宽等引起的劣化影响.主要技术特征是采用两支参量不同的波导来构成非对称定向耦合器.报告了用非对称定向耦合器构成的马赫-泽德尔干涉型波导分波器的结构特点、基本工作原理和光学特性,详细讨论了器件的设计原理和器件性能优化的处理方法.采用三维波束传播法做了仿真验证,结果表明,该器件在1 550±5 nm和1 310±5 nm的波长带域上、对两个正交偏振态均实现了串扰小于－40 dB的高隔离度分波特性.     

Polarization beam splitter using a binary blazed grating coupler

A novel polarization beam splitter using a two-layer grating coupler is proposed and demonstrated. It can directly couple the normally incident light from fiber into two separate waveguides according to their polarization states while splitting them. It realizes high coupling efficiency and a good extinction ratio by using binary blazed grating couplers. The coupling length is less than 14 microm. The extinction ratio is better than 20 dB for both polarizations over a 40 nm wavelength range, and the coupling efficiencies for the two layers are 58% and 50%.     

All-optical Steerable Directional Coupler Using Kerr Dark Spatial Soliton Waveguides

1.IntroductionOpticalspatialsolitoninduced-waveguidesareofgreatresearchinterestrecently[1-8]becauseoftheirPOtentialapplicationinopticalcommunicationsandopticalcompution.Asoliton--inducedwaveguidecanguidelightinself--focusingorself--defocusingKerr-typemediabecausethesolitonbeaminducesarefractive-indexprofileequivalenttoanordinarydielectricwaveguide.Soliton-inducedwaveguidecansupPOrtmanymodesofaprobebeampropagatingcoaxiallyalongthesolitonwaveguideSoliton-inducedwaveguideshaveadvantageovertheir…     

熔锥型光纤耦合器宽带特性研究

报道了在常规熔锥型单模光纤定向耦合器工艺基础上，以氢氟酸腐蚀法，将两光纤耦合区直径腐蚀成适当比例，用水平直接熔融拉锥系统，将耦合区域拉制成非对称臂组合波导，从而获得了具有宽频带特性、且尺寸较小的单模光纤定向耦合器，实验结果说明：通过控制耦合区长度，可以使耦合器耦合功率在某个特定波长附近、预定小于１００％分束比上具有相当平坦（宽带）特性；从而，通过控制组合波导的不同直径比，可望得到不同分束比宽带耦合     

用于光纤光栅解调的波长敏感光纤耦合器

为了拓宽光纤耦合器的使用范围,开发光纤耦合器的新功能,采用熔锥技术制作波长敏感耦合器,该耦合器在分光的同时对波长敏感。通过耦合理论验证实验结果,实验数据与理论值相符合。实验中得到波长灵敏度最大值为17.86%/nm的耦合器。采用拉锥工艺制作波长敏感耦合器工艺简单,耦合比峰值对应波长控制易于实现。该耦合器可用于光纤光栅布拉格波长漂移解调。令待解调光纤光栅布拉格波长与耦合器波长灵敏度最大值对应的波长一致,当波长发生漂移时,耦合器输出耦合比发生变化。自制的波长敏感耦合器实现了对布拉格波长为1566.71 nm光纤光栅波长漂移的解调,波长漂移1.80 nm,耦合比变化20.34%。此种解调方式具有光路简单,易于与光纤匹配的优点,可以应用在大型建筑中光纤光栅的健康监测。     

On the radiation mode effects in integrated optical directional couplers

In this work we study the effect of radiation modes generated at the input of a directional coupler on its performance. We focus on the splitting ratio and the coupling length of the coupler. The Beam Propagation Method (BPM) is used for numerical simulation. Numerical results are compared to analytical expectations of the coupled mode theory (CMT). We show that, when the coupler is excited by a single mode fibre, ideal 3 dB couplers could be obtained by a simple adjustment of the exciting fibre. On the other hand, when the coupler has input and output bend structures, its coupling length as well as its splitting ratio are affected by the geometry of this bend.     

300 W侧面分布式抽运掺Yb全光纤放大器

采用角度磨抛的方式, 在纤芯/包层为20/400 μm双包层掺Yb光纤上制作了侧面抽运耦合器. 该耦合器对975 nm的半导体二极管抽运光的耦合效率最高可达97%, 对1080 nm信号光的泄漏比小于2%. 分析了侧面抽运耦合器的性能以及多个侧面抽运耦合器的级联分布对抽运耦合效率的影响; 同时, 在前向抽运和双向抽运方式下, 分析了级联耦合器的分布及信号光泄漏比对激光器整体效率的影响, 并进行了数值模拟. 采用自行研制的侧面抽运耦合器, 搭建了侧面耦合分布式抽运、掺Yb双包层全光纤主振荡功率放大器, 获得了波长为1080 nm、功率为303 W 的基模激光输出. 进一步增加抽运点个数, 提高抽运功率, 可获得更高的输出功率.     

平面光波导型单纤三向器的研究

利用光束传输法,分析设计了一种只由两个定向耦合器构成、能直接与单模光纤相耦合、易于集成的平面光波导（Planar Lightwave Circuit,PLC）型1.31/1.49/1.55 μm单纤三向器.该器件的输入输出弯曲波导和耦合区平行波导均采用光束传输法进行优化设计,并对器件的折射率进行了容差分析,获得了当两个定向耦合器的耦合长度分别为6 578 μm、3953 μm时,器件对各波长的隔离度均在47 dB以上,且插入损耗小于0.05 dB.     

Analysis of the plasmonic power splitter and MUX/DEMUX suitable for photonic integrated circuits

In this paper, the metal-insulator-metal (MIM) plasmonic directional coupler (PDC) with 45° waveguide bends based on surface plasmon polaritons (SPPs) excitation has been analyzed by the finite-difference time-domain (FDTD) numerical method. Effects of the variations of the coupler length and the metal gap thickness on the output powers and the propagation loss at 1550 nm wavelength have been studied. By choosing proper coupler lengths, power splitters with various output power ratios at 1550 nm wavelength and multi/demultiplexers, as some applications of the directional couplers have been proposed and their performances have been simulated.     

宽频带熔锥型耦合器的变化分析

利用变分法对腐蚀熔锥型非对称单模光纤耦合器的耦合特性进行了分析.文中根据耦合器的光纤参数及截面尺寸,用有效平行波导模型,对自制的弱融型熔锥耦合器的转换功率随波长变化曲线进行了计算.结果表明,不仅宽频带特性的理论曲线与实验符合得较好,而且耦合器的耦合特性对二光纤的芯径比及熔锥长度的变化十分灵敏,这也与实验相符.     

仅有相邻波导耦合的定向耦合器的一般解法

应用切比雪夫多项式 ,求得了仅有相邻波导耦合的 (N +1)× (N +1)定向耦合器在弱耦合、无损耗和忽略正交偏振模场分量间耦合的情形下波导耦合方程的通解。列出线形排列 2× 2 ,3× 3,4× 4定向耦合器的解的表达式 ,并对环形排列 3× 3定向耦合器的解作了较详细的分析     

Numerical characterization of nanopillar photonic crystal waveguides and directional couplers

We numerically characterize a novel type of a photonic crystal waveguide, which consists of several rows of periodically arranged dielectric cylinders. In such a nanopillar photonic crystal waveguide, light confinement is due to the total internal reflection. A nanopillar waveguide is a multimode waveguide, where the number of modes is equal to the number of rows building the waveguide. The strong coupling between individual waveguides leads to the proposal of an ultrashort directional coupler based on nanopillar waveguides. We present a systematic analysis of the dispersion and transmission efficiency of nanopillar photonic crystal waveguides and directional couplers. Plane wave expansion and finite difference time domain methods were used to characterize numerically nanopillar photonic crystal structures both in two- and three-dimensional spaces.     

Novel composite beam splitter with directional coupler and Y-junction using photonic crystal

We propose and analyze a novel multiway high efficiency composite beam splitter based on propagation properties of the light waves in directional coupler and Y-junction. The splitting properties of the beam splitter have been numerically simulated and analyzed using the PWE and FDTD methods. Then in order to obtain equal distribution of power, we place and adjust some additional rods in the output waveguides to optimize the devices. It was shown that a large separating angle, a high beam rate, high flexibility, has been extended to have more light output channels in the beam splitter.     

Characteristic analysis of a directional coupler in horizontal multiple-slotted silicon wires with slanted sidewalls

The characteristics of the directional couplers based on the horizontal multiple-slotted waveguides with slanted sidewalls are analyzed in detail by using a mode solver based on the full-vectorial finite element method with perfectly matched layers absorbing boundary conditions. The coupling length of the directional coupler as functions of the structural parameters including waveguide spacing, sidewalls angle, the thickness and refractive index of the slot regions, both in quasi-TE and quasi-TM modes, is obtained. The effective indexes and the field distributions of the even and odd modes also are presented. The numerical results show that polarization-independent directional couplers can be realized by properly choosing structural and material parameters.     

Nonlinear directional coupling between plasmonic slot waveguides

A numerical investigation of nonlinear switching in plasmonic directional couplers made of two dielectric slab waveguides with metallic claddings is presented. We assume Kerr-nonlinear dielectric and study the influence of geometrical parameters, metallic losses, and metal nonlinearities on coupler characteristics. We observe a general trade-off between losses and nonlinearity levels required for the switching operation. Underlying physical mechanisms that affect the coupler performance are discussed. The obtained results can be useful in design and optimization of the nonlinear plasmonic couplers.     

Circuit-oriented modelling of ring-resonators

In this work we propose a circuit-based analysis of both a ring phase shifter and a single ring filter, taking into account the effects of imperfections in the directional couplers and polarization conversion in bent waveguides. New models for the directional coupler and for the bent waveguide are proposed and used to find an analytical expression of the transfer functions of ring based devices. The numerical results obtained with the new models show that defects in directional couplers and polarization conversion in bent waveguides are responsible of spectral impairments often observed experimentally, confirming the validity of the model.     

Polarization-independent optical directional coupler based on slot waveguides

A polarization-independent optical directional coupler based on slot waveguides is proposed and analyzed by using rigorous full-vectorial analysis methods based on a finite-element scheme. Properly choosing materials and structural parameters makes the coupling length for quasi-TE modes become equal to that for quasi-TM modes. Tolerances to operating wavelength and structural parameters are also discussed. The proposed coupler can be used for highly integrated optical circuits without polarization diversity schemes.     

一种全光纤型窄带梳状滤波器的特性分析

分析了由双光纤定向耦合器组成的梳状滤波器的透射特性。根据传输矩阵,推导出了该滤波器的输出光谱与有关参数之间的关系式。分析结果表明:该滤波器具有法布里_珀罗腔多光束干涉的特点,是一种窄带宽梳状滤波器;耦合器的耦合系数与法布里_珀罗腔中的反射率类似,通过控制耦合系数可以调节滤波器的通带半宽度、消光比、隔离度、输出光强等。     

1×7锥形混合棒塑料光纤耦合器

利用光线追迹法进行数值仿真得到了锥形混合棒塑料光纤耦合器的分光比与其长度的关系.数值仿真表明:这种耦合器的分光比随锥形光波导长度增加,在0.143(即均分处)上下呈振荡型变化.选择一均分且分光比变化平缓的区域作为制作光波导的长度,通过拉伸粗的光波导棒成锥形且达到所需的长度,并采用精密的机械连接,制作出了1×7塑料光纤耦合器.测试数据表明:这种塑料光纤耦合器具有很高的均匀性.