植物研究用γ射线成像系统设计（英文）

为了利用正电子发射断层成像技术在植物生理功能研究中的优势,正在开发由两个探测器相向放置构成的γ射线成像系统.系统中采用的探测器是由10×10的氧正硅酸镥(LSO)晶体阵列与滨松R5900-C12耦合组成.单个LSO尺寸为1.8mm×1.8mm×10mm.根据PET应的特点,测试了该探测器的性能.所有闪烁晶体的图像在位置图谱中清楚可见;511keV全能峰处的能量分辨率位于14.5%-22%之间;符合时间分辨率随着位置灵敏光电倍增管的供给电压的增加而得到改善.这些实验结果表明,该LSO探测器适于构造高分辨率的双探测器成像系统.     

PET用新型深度编码探测器设计

平行性问题或作用深度问题影响着正电子放射层析系统(PET)的成象分辨率。本文提出和评价了一种二阶深度编码探测器,这个探测器是由两层LSO晶体和位置灵敏型光电倍增管(PS-PMT)组成,上层的晶体相对于下层的晶体的位置在X和Y方向上都有半个晶体阵列单元的错位,因为每个晶体的输出光的重心位置分布在PS-PMT上不同的位置,所以通过计算其重心位置就可在象平面上区别开每个晶体。根据PET系统的应用要求,我们验证了探测器的性能。伽马射线垂直入射时,上层晶体阵列的固有空间分辨率为1.15mmFWHM,下层晶体列阵为1.34mm FWHM.钠伽马辐射源的511keV能量峰处的平均能量分辨率对于下层晶体为19.7%,上层为23.6%.通过类似的技术亦可实现3阶、4阶深度编码探测器。     

双层深度编码探测器的晶体表面优化

设计了双层LSO晶体和位置灵敏型光电倍增管耦合构成的用于小动物PET成像的 深度编码探测器. 众所周知, 晶体的不同的表面处理影响着光输出量, 进而影响着它们构建的PET探测器的性能. 为了优化设计的深度编码探测器的性能, 测试了两种不同表面处理的LSO闪烁晶体阵列探测器的晶体分辨能力及其能量、时间和空间分辨率, 结果表明, 光滑表面LSO晶体构建的深度编码探测器显示出良好的空间、能量及时间分辨特性.     

植物研究用γ射线成像系统设计

为了利用正电子发射断层成像技术在植物生理功能研究中的优势,正在开发由两个探测器相向放置构成的γ射线成像系统.系统中采用的探测器是由10×10的氧正硅酸镥(LSO)晶体阵列与滨松R5900-C12耦合组成.单个LSO尺寸为1.8mm×1.8mm×10mm.根据PET应用的特点,测试了该探测器的性能.所有闪烁晶体的图像在位置图谱中清楚可见;511keV全能峰处的能量分辨率位于14.5%—22%之间;符合时间分辨率随着位置灵敏光电倍增管的供给电压的增加而得到改善.这些实验结果表明,该LSO探测器适于构造高分辨率的双探测器成像系统.     

高分辨率及高灵敏度小动物PET研究进展

作为一种高灵敏度且具有定量测量能力的功能分子影像技术,小动物PET越来越广泛地用于各种生物医学研究,例如疾病动物模型研究、新药物研发和新治疗方法评估等。首先回顾小动物PET成像系统的发展历史、效率和空间分辨率等性能的改进和产业化;其次,讨论了影响PET空间分辨率和效率的各种因素,包括晶体大小、探测器几何、正电子射程、光子非共线效应、图像重建算法和阻碍PET系统同时达到高空间分辨率和高效率的相互作用深度不确定效应;最后,介绍了小动物PET成像系统在以下几个方面的取得的最新进展:（1）高密度、小的光衰减常数和高光产额的闪烁晶体;（2）体积小、增益大、时间性能好、工作电压低和磁兼容的新型硅光电倍增管光探测器;（3）各种深度测量PET探测器,详细介绍了一个可达到分辨0.43 mm×0.43 mm×20 mm晶格和达到2.4 mm深度分辨率的双端读出探测器;（4）使用深度测量探测器的小动物PET成像系统,详细介绍了一个使用高分辨率双端读出探测器,全视野达到0.55 mm平均位置分辨率的小动物PET原型系统;（5）磁兼容插件式小动物PET成像系统和PET/MRI同时成像的优点;（6）小动物PET图像重建和数据校正的特点、传统的滤波反投影算法和新的迭代算法的优缺点和PET图像重建算法未来的发展方向。As the most sensitive and quantitative molecular imaging technique,small animal positron emission tomography (PET) has become a widely used tool in biomedical research such as in animal model of human disease,development of new drugs and the evaluation of new therapeutics.In this paper,first the history,the efforts to improve the spatial resolution and sensitivity as well as the commercialization process of small animal PET scanner are reviewed.Then the factors that affect the spatial resolution and sensitivity of PET scanner such as crystal size,detector geometry,positron range,photon noncollinearity and imaging reconstruction are discussed in detail.The depth of interaction effect which hinders the simultaneous achievement of PET spatial resolution and sensitivity are also discussed.Finally the recent progress made in the following areas of small animal PET instrumentation are introduced:(1) high density,short light decay constant and bright scintillator,(2) compact,high gain,good timing resolution,low bias voltage and MRI compatible silicon photomultiplier,(3) depth encoding detectors by using different methods,a detector using dual-ended readout,identifying 0.43 mm×0.43 mm×20 mm crystals and achieving a 2.4 mm depth of interaction resolution was introduced in detail,(4) small animal PET scanners using depth encoding detectors,a prototype scanner using high resolution dualended readout detectors and achieving an average of 0.55 mm spatial resolution in the whole field of view was introduced in detail.(5) MRI compatible small animal PET inserts and the advantage of simultaneous PET/MRI imaging,(6) image reconstruction and data correction of small animal PET,the filter back projection and iterative reconstruction algorithms are compared and a few key directions of PET image reconstruction will be presented.     

基于旋转扫描探头的OCT内窥成像系统设计

为了同时获取样品的表面和深度信息,研究光学相干层析的成像原理,建立了基于光学相干层析技术的内窥系统,实现了旋转扫描成像,系统的工作波长为1 310 nm,工作带宽为80 nm.理论推导及计算机仿真得到了系统信噪比与干涉仪的分光比、反射率之间的关系并分析了理论分辨率和探测深度.提出外径为5 mm的内窥镜扫描探头,聚焦距离为12 mm,数值孔径NA为0.47,折射率分布常量A=0.218 7.利用微型电机驱动直角棱镜实现扫描,旋转速度为25 rpm,旋转一周得到640个采样点.采用多层盖玻片和洋葱表皮作为样品进行实验分析,得到了盖玻片和洋葱的图像,横向分辨率和纵向分辨率分别为10 μm和15 μm.结果表明,设计的光学相干层析内窥系统能够用于旋转扫描成像,获取更多的组织信息.     

PET探测器技术的新进展

PET设备中探测器的研发, 一直是很活跃且具有高创新性的领域。 提高现有基于闪烁晶体探测器的性能, 研究适用于多模式成像设备（PET/CT和PET/MRI）的新型探测器, 满足TOF和DOI技术的需求并促进其发展应用, 构成PET探测器的几个主要研究方向。 介绍了PET探测器在闪烁晶体、 光电探测器和半导体探测器等方面的最新进展, 指出未来最有潜力的探测器设计方案。 The research on PET detector is a very active and highly innovative field. The main research interests of PET detector include improving performances of scintillation crystal detectors, investigating new detectors being suitable for multimodality imaging (e.g., PET/CT and PET/MRI), meeting needs of TOF and DOI technologies in order to promote their development and application. In this paper, new developments in PET detector technology about scintillation crystal, photodetector and semiconductor detector are introduced and the most potential detector design scheme in the future is brought forward.     

新型位置灵敏光电倍增管的性能测量

位置灵敏型光电倍增管(PS-PMT)代表了基于单个管子的原理开发新概念γ相机的技术进步.最近,日本滨松公司出品了一种新型紧凑型的PSPMT—R7600-C12.根据正电子放射断层成像系统(PET)的应用特点,我们测试了由该PS-PMT组合成的闪烁晶体阵列探测器的空间分辨率、空间线性度、增益均匀性及时间分辨率LSO与该PS-PMT的组合空间分辨率达到1.4mm,而且显示出良好的空间线性、增益均匀性及优异的时间分辨特性.     

线照明并行谱域光学相干层析成像系统与缺陷检测应用研究

针对玻璃缺陷在线无损检测的迫切需求,本文报道了一种基于线照明并行谱域光学相干层析成像系统的大视场检测系统.该系统采用快速面阵CMOS相机,单次拍摄即可获取完整的横截面(B-scan)图像.基于线照明面阵探测器的并行谱域光学相干层析成像系统,可以同时获取沿线照明方向各位置处的深度分辨信息,避免了横向扫描机构的应用.研制系统的轴向分辨率为17.9μm,并行方向上的横向分辨率55.7μm,扫描方向上的横向分辨率为24.8μm,轴向扫描速率为128 000 A-scan/s,横向视场为32 mm,空气中成像深度大于6 mm,成像灵敏度达到62 dB以上.利用研制的线照明并行谱域光学相干层析成像系统,开展了不同类型玻璃表面及其内部缺陷的检测应用研究.     

正电子放射层析成象系统设计的计算机模拟

在一个简单实用的数学模型基础上,利用现代计算机技术对正电子放射层析成象系统(PET)进行了模拟,并详细讨论了闪烁晶体材料的物理、几何特性以及探测器环直径的大小对于PET系统的空间分辨率的影响.本文所得的结论对于开发和设计PET系统来说,是非常有用的.     

A 3 × 6 arrayed CCD X‐ray detector for continuous rotation method in macromolecular crystallography

A 3 × 6 arrayed charge‐coupled device (CCD) X‐ray detector has been developed for the continuous‐rotation method in macromolecular crystallography at the Photon Factory. The detector has an area of 235.9 mm × 235.9 mm and a readout time of 1.9 s. The detector is made of a 3 × 6 array of identical modules, each module consisting of a fiber‐optic taper (FOT), a CCD sensor and a readout circuit. The outputs from 18 CCDs are read out in parallel and are then digitized by 16‐bit analog‐to‐digital converters. The advantage of this detector over conventional FOT‐coupled CCD detectors is the unique CCD readout scheme (frame transfer) which enables successive X‐ray exposures to be recorded without interruption of the sample crystal rotation. A full data set of a lysozyme crystal was continuously collected within 360 s (180° rotation, 3 s/1.5° frame). The duty‐cycle ratio of the X‐ray exposure to the data collection time was almost 100%. The combination of this detector and synchrotron radiation is well suited to rapid and continuous data collection in macromolecular crystallography.     

Effect of Host Medium on the Fluorescence Emission Intensity of Rhodamine B in Liquid and Solid Phase

In this work, we study the effect of concentration, host medium, PH and phase states on the fluorescence emission from the laser dye Rhodamine B pumped by UV laser as exited source. The polymethylmethacrylate PMMA is used as a host medium in case of solid phase samples while, ethanol and Tetrahydrofuran (THF) are used in case of a liquid one. Laser Induced Fluorescence (LIF) technique was used to study the fluorescence properties of both cases of liquid and thin film solid-state samples. In addition, the Dual Thermal Lens (DTL) technique was used to study the quantum yield of these samples. The concentrations of Rhodamine B in ethanol as solvent between 2 × 10⁻² M and 5 × 10⁻⁶ M were studied. The maximum fluorescence emission is observed at concentration of Rhodamine B C = 3 × 10⁻⁴ M. Comparison studies were investigated for different host medium such as ethanol, THF, PMMA in liquid phase state and PMMA in solid phase state. The measurements revealed that, the behavior of both phases state was analogous. Rhodamine B/PMMA thin film sample by ratio of 4:1 and thickness 0.12 mm was found to have the best photostability sample with a quantum yield about ≈0.82.     

High‐energy X‐ray diffraction using the Pixium 4700 flat‐panel detector

The Pixium 4700 detector represents a significant step forward in detector technology for high‐energy X‐ray diffraction. The detector design is based on digital flat‐panel technology, combining an amorphous Si panel with a CsI scintillator. The detector has a useful pixel array of 1910 × 2480 pixels with a pixel size of 154 µm × 154 µm, and thus it covers an effective area of 294 mm × 379 mm. Designed for medical imaging, the detector has good efficiency at high X‐ray energies. Furthermore, it is capable of acquiring sequences of images at 7.5 frames per second in full image mode, and up to 60 frames per second in binned region of interest modes. Here, the basic properties of this detector applied to high‐energy X‐ray diffraction are presented. Quantitative comparisons with a widespread high‐energy detector, the MAR345 image plate scanner, are shown. Other properties of the Pixium 4700 detector, including a narrow point‐spread function and distortion‐free image, allows for the acquisition of high‐quality diffraction data at high X‐ray energies. In addition, high frame rates and shutterless operation open new experimental possibilities. Also provided are the necessary data for the correction of images collected using the Pixium 4700 for diffraction purposes.     

Continuous-unconstrained and global optimization for PSO-PTS based PAPR reduction of OFDM signals

Orthogonal frequency division multiplexing (OFDM) is a superior technology for the high-speed data rate of wire-line and wireless communication systems. However, one of the major drawbacks of OFDM signals is the high peak-to-average power ratio (PAPR) problem inherent in 5G waveform design. High PAPR causes OFDM signal distortion in the nonlinear region of the high power amplifier (HPA), and signal distortion leads to a decrease in bit error rate (BER). Partial transmit sequence (PTS) technique is a very attractive technique for PAPR reduction. However, to match the optimum condition on PTS for PAPR reduction, the computational unpredictability and cost of traditional PTS strategy are enormous, thus it is urgent to enhance computational efficiency to obtain the optimal PTS. In this paper, an improved scheme called Continuous-Unconstrained Particle Swarm Optimization based PTS (CUPSO-PTS) technique for optimum phase rotation factors searching is presented. A class of continuous-phase PTS schemes has been proposed to obtain the global optimal phase factor, and the theoretical boundaries can be determined in the continuous-unconstrained searching space. Conversely, when the phase factor values in continuous-unconstrained domain, the equivalent unconstrained PTS optimization can drastically accelerate convergence and reduce total calculation cost. In this paper, we compare the performance of Binary PSO based PTS (BPSO-PTS) scheme and Elitist Genetic Algorithm based PTS (EGA-PTS) scheme for 16-QAM modulation scheme. Theoretical analysis and simulations show that the proposed CUPSO-PTS scheme could provide a significant PAPR reduction in the OFDM system, which outperforms the OFDM systems with the traditional PTS scheme by 0.55 dB at CCDF of 10⁻³ in PAPR reduction. And 84.74% computational complexity is saved.     

Surface potential decay of DC-corona-charged PET films on humid electrodes

Surface potential decay measurement is a widely used tool to test the electrical properties of insulation materials. The aim of the present paper is to evaluate the effect of a humid electrode on the surface potential decay process. The experiments are performed on 1-mm thick samples of PET films (50 mm × 50 mm) in ambient air (temperature: 25 °C–29 °C; relative humidity: 42%–48%). The samples are placed on a grounded humid electrode (aluminum plate covered by a humid textile: 52 mm × 52 mm), and are charged by exposing them for 10 s to the negative DC corona discharge generated by a high-voltage wire-type dual electrode.The results show that the humid electrode has a significant influence on the surface potential evolution during the first moments after corona charging. Bipolar charge injection is the main physical mechanism that explains this potential decay.     

利用作用深度信息提高正电子断层成像仪分辨率一致性

获取作用深度信息是设计小动物正电子断层成像仪的关键技术之一.我们利用新设计的含有作用深度信息的探测器，从模拟与实验两个方面观测了作用深度信息对于分辨率一致性的影响.结果表明：在γ射线垂直入射时，深度编码探测器和一般的无深度检出机能的探测器，均获得了高分辨率，而γ射线斜入射时，深度编码探测器与一般的探测器相比能提供更好的空间分辨率. 关键词： 作用深度 空间分辨率 正电子断层成像仪