Incident-angle dependence of the longitudinal optic mode and the Doppler effect in silica glass

The infrared reflection spectra of silica glass were monitored at different incident angles of the wave. The density of states (DOS) and frequency ω_LO of the longitudinal optic (LO) mode were found to be the functions of the incident angle. The DOS of the LO mode increases with increasing incident angle as a whole. However, two regions can be divided in which one is below ∼30° and the other is above 30°. The frequency ω_LO of the LO mode increases linearly with incident angle. The earlier proposed relationship between the shifted frequency produced by the Doppler effect and the source frequency of the main transverse optic (TO) mode was investigated by studying the infrared spectra of the annealed glass capillaries. The shifted frequency was found to be linearly proportional to the source frequency of the TO mode, as depicted by the Doppler effect.     

Super-slippery carbon nanotubes

The friction between the walls of multi-wall carbon nanotubes is shown to be extremely low in general, with important details related to the specific choice of the walls. This is governed by a simple expression revealing that the phenomenon is a profound consequence of the specific symmetry breaking: super-slippery sliding of the incommensurate walls is a Goldstone mode. Three universal principles of tribology, offering a recipe for lubricant selection are emphasized. Received 8 August 2001     

Ultrathin atomic vapor film transmission spectroscopy: analysis of Dicke narrowing structure

Transmission sub-Doppler spectroscopy with confined atomic vapor film between two dielectric walls is theoretically studied. Because of atoms flying from wall to wall, where they get de-excited, the atomfield interaction time is anisotropic so that the contribution of slow atoms is enhanced, a sub-Doppler transmission spectroscopy (Dicke narrowing effect) can be obtained when the thickness of the film is much small or comparable with the wavelength even at small angle oblique incidence. It is feasible to get a sub-Doppler structure in a new region (L ＜λ/4) in experiments.     

Improving mixture of grains by using bi-dimensional Galton boards

This paper presents an experimental and numerical study that deals with the problem of mixing grains falling down through a bi-dimensional Galton board (BGB). The special issue addressed here is the influence of the presence of lateral walls in the BGB. Disks of equal diameters but different species are launched from the top of the device. During the fall, disks collide with obstacles (arranged to form a triangular lattice) and with the lateral walls. The exit distribution of particles at the bottom of the board is determined and the incidence of the presence of walls in the mixing quality is studied as a function of W the relative separation between lateral walls. Two types of indexes are evaluated to characterize the efficiency in the obtained mixture. The presence of walls has proven to be crucial to enhance the quality of the mixture of particles.     

Effect of piezomagnetism on coupling of electric and magnetic domain walls in hexagonal manganites

The profiles of antiferromagnetic domain walls in hexagonal manganites RMnO₃ are obtained numerically depending on anisotropy and internal strain due to the lattice distortion at the ferroelectric domain walls. It is found that the piezomagnetism can lower the free energy of the system thus it favors the coupling between electric and magnetic domain walls. Due to the piezomagnetic effect, the clamped antiferromagnetic domain walls with spin orientation angle ψ changing from 0 to π have different profiles comparing with those of ψ changing from 0 to -π, and the former is energetically more favorable than the latter when the internal strain is tensile at the FEL domain walls while it is the contrary for compressive strain. Moreover, the strongest coupling between the FEL domain walls and the favorable AFM domain walls can be achieved at an optimized internal strain.     

Ce:KNSBN晶体光扇效应的入射光强度阈值特性研究

采用非同时读出条件下的两波耦合实验装置,以单束光入射Ce:KNSBN光折变晶体,系统研究了Ce:KNSBN晶体中光扇效应随入射光偏振态、入射光强度、光入射角的变化情况.结果表明异常偏振光入射晶体时光扇效应明显,且存在明显的入射光强度阈值特性,入射光强度阈值为38.2 mW/cm2;相同光入射角下,稳态光扇强度随入射光强度的增强而明显变大;对应相同的入射光强度,稳态光扇强度随光入射角θ的增大而增大,当θ为15°时到达峰值,而后随θ的增大而逐渐减小.同时对光扇效应的入射光强度阈值特性以及稳态光扇强度随入射光偏振态、入射光强度、光入射角的变化作出了相应的物理解释.     

两电介质间慢速原子的吸收特性

从理论上研究了在不考虑Fabry-Perot效应时两电介质间原子蒸汽膜的吸收光谱,发现在很多情形下表现为Dicke窄化结构的谱线与入射角、膜的厚度和入射波长的比值L/λ有关.我们也讨论了当L/λ=1/2时,吸收峰和带宽相对于入射角的变化.     

Capillary filling with pseudo-potential binary Lattice-Boltzmann model

We present a systematic study of capillary filling for a binary fluid by using a mesoscopic lattice Boltzmann model for immiscible fluids describing a diffusive interface moving at a given contact angle with respect to the walls. The phenomenological way to impose a given contact angle is analysed. Particular attention is given to the case of complete wetting, that is contact angle equal to zero. Numerical results yield quantitative agreement with the theoretical Washburn’s law, provided that the correct ratio of the dynamic viscosities between the two fluids is used. Finally, the presence of precursor films is experienced and it is shown that these films advance in time with a square-root law but with a different prefactor with respect to the bulk interface.     

Effect of low-symmetry mechanical stresses on the magnetic properties of iron borate

Low-(C ₃) symmetry mechanical stresses are used to induce an additional crystalline magnetic anisotropy in the basal plane of a FeBO₃ single crystal. The effect of the stress-induced anisotropy on the main magnetic properties of this weak ferromagnet is studied by a magnetooptic method. This additional anisotropy is shown to transform the initial 180° domain structure of iron borate into a structure with domain walls making an angle of ～ 120° with each other in the basal plane of the crystal. However, unlike in the ordinary 120° DW structure, the azimuthal angle of the spontaneous magnetization vectors in the arising domains varies along domain walls. It is found that the stress-induced transformation of the crystal’s domain structure significantly affects the shape of hysteresis loops recorded at quasi-static magnetization, increases the initial magnetooptic susceptibility, and makes the coercive force anisotropic.     

Magnetostriction of a single crystal of nickel observed with an X-ray four-circle goniometer

We proposed a technique to observe magnetostrictive coefficients of a single crystal specimen with X-ray diffraction. An angle between a direction of crystallographic orientation and a direction of magnetic field could be estimated with two kinds of diffraction peaks which were found with an X-ray four-circle goniometer. The magnetostriction was measured by a shift of Bragg angle. This technique was suitable for a case to observe the magnetostrictive coefficient which varied as a function of the magnetic field direction. We applied the technique to a single crystal specimen of nickel and showed dependences of the magnetostriction on the magnetic field strength and its direction around an axis of easy magnetization at room temperature.     

Magnetization reversal in (0 0 1)Fe thin films studied by combining domain images and MOKE hysteresis loops

The magnetization reversal of epitaxial single-crystal Fe films has been studied by combining domain images and hysteresis loops. The reversal is quantitatively described by combining the coherent rotation model and the domain wall displacement model. The pinning energy exerted on the domain walls and the domain wall angle at the switching fields are obtained by fitting this model to experimental hysteresis loops. The field-dependent pinning energy and the domain wall angle in the reversal process, and the contributions of second-order magneto-optic effect to hysteresis loops, are revealed to be two important features of single-crystal Fe films.     

Magnetic phase diagram of the frustrated two-layer system ferromagnet-antiferromagnet

The thickness-roughness phase diagram of a thin ferromagnetic film on an antiferromagnetic substrate is studied in the case where the roughness of the interface between the layers causes frustration of the exchange interaction between them. It is shown that the account of single-ion anisotropy makes the phase diagram significantly more complicated in comparison with that calculated within the exchange approximation. The evolution of a new type of domain walls caused by frustrations is traced with an increase in the film thickness and the width of the atomic steps on the film-substrate interface.     

关于磁聚焦实验中荧光屏上显示的线段与所加电场之间的关系

磁聚焦法是测定电子荷质比的一种有效方法,本文在此实验的基础上,研究了实验测量过程中荧光屏上显示扫描的线段随所加的电场的变化关系,证明了忽略电场的边缘效应时,电压偏转板并不改变电子束在荧光屏上的显示形状,但是增加了线段的长度,并且线段与水平轴的夹角也有所变化.     

Discrete Element Method studies of the collision of one rapid sphere on 2D and 3D packings

We performed numerical simulations of one-bead collision on the surface of a static granular medium. The simulations have been done for two- and three-dimensional packings of beads. The effect of the incident bead velocity, the shot angle, the mechanical parameters and the packing structure are analyzed for ordered and disordered 2D packings and only disordered 3D packings. The 2D results are in good agreement with experimental available data. The 3D simulations give good preliminaries results about the shock-wave propagation through the stacking and provides new insights in the ejection process (“splash function”).     

Sub-diffraction-Limit Imaging in Optical Hyperlens

Sub-diffraction-limit imaging in the optical hyperlens based on cylindrical metamaterials is studied. Some parameters of hyperlens, such as the dispersive relation and the divergence angle of imaging, are numerically analysed with the ray trajectory method and effective medium theory. The dependence of imaging properties on dielectric constant is discussed. As a result, a 0° divergence angle is obtained for the best imaging effect. This work will be helpful for the design, structure fabrication and resolution improvement of the optical hyperlens.     

Effect of pattern shape on etching wall profile in slider fabrication

The effect of pattern shape on etching wall profile in slider fabrication is studied. The testing results show: (1) the wall profile of round pattern is steeper than that of long rectangular; (2) for round patterns, the smaller the radius is, the steeper the wall profile is; (3) the profile of outer angle is steeper than that of inner angle. The flying height offset caused by wall profile with different shapes can be 8% of total flying height, so it is necessary to consider the effect of pattern shape on etching wall profile in ABS design, especially for ultra low flying height slider.     

Magneto resistance due to domain wall scattering and magneto size effect of thin Ni and Co films at low temperatures

Nickel and cobalt films illustrate alternative Bloch lines with cap switches. The strip magnetic domains become zigzag and bubbling cells for Ni and Co films, respectively, under an external field of 1.5 T. The magnetoresistances (MR) for currents parallel (CIW) to the domain walls is 15% less than those of the perpendicular (CPW) case. We also studied the magneto size effect by applying the magnetic field normal to the surface, from which the Sondheimer oscillation appears attributing to periodic striking of the surface for electrons traveling in circular motion on a plane canting to the surface. The experiments can be expressed by the magneto size effect inherited with very small specularity parameters.     

双曲色散型单轴左手介质中的折射

研究了横磁波在各向同性右手介质和双曲色散型单轴左手介质界面处波矢和能流的折射。计算发现,当入射角在很大范围内变化时,波矢的折射角和能流的折射角几乎不变。调节光轴角可使波矢折射角和能流折射角随入射角变化不敏感的现象更明显,经分析计算给出光轴角的调节范围。这一现象是由双曲色散型单轴左手介质的各向异性及负的主折射率引起的,可以用来实现光束准直、光束整合、光束压缩以及方便的光束耦合。如果光从双曲色散型单轴左手介质向各向同性右手介质入射,还能实现超棱镜(superprism)现象。计算了横磁波穿越界面时的透过率,证实双曲色散型单轴左手介质可能实现上述应用。     

Microwave Experimental Observation of Transmitted Enhanced Goos--Hänchen Displacement in Symmetry-Double-Prism Configuration

It is theoretically proven that the transmitted Goos-Hiinchen （GH） displacement in the symmetry-double prism could be resonantly enhanced when the incident angle is less than but near the critical angle, and is modulated by the slab thickness between two prisms and the incident angle. This enhancement effect is directly observed in microwave experiments in which the incident angle is properly chosen. The measured data are in good agreement with the result of the numerical simulation.     

Model for self-propulsive helical filaments: kink-pair propagation

Spiroplasma bacteria propel through viscous fluids by sending kinks or domain walls between regions of opposite handedness down their helical body. A simple elastic model for the domain-wall propagation is formulated and studied using hydrodynamic simulations and scaling arguments, giving good agreement with recent video-microscopy observations. It is shown that the observed helical bacterial pitch angle psi approximately 35 degrees is optimized for maximal speed and efficiency.