Synthesis of magnetic rhenium sulfide composite nanoparticles

Rhenium sulfide nanoparticles are associated with magnetic iron oxide through coprecipitation of iron salts with tetramethylammonium hydroxide. Sizes of the formed magnetic rhenium sulfide composite particles are in the range 5.5-12.5 nm. X-ray diffraction and energy-dispersive analysis of X-rays spectra demonstrate the coexistence of Fe₃O₄ and ReS₂ in the composite particle, which confirm the formation of the magnetic rhenium sulfide composite nanoparticles. The association of rhenium sulfide with iron oxide not only keeps electronic state and composition of the rhenium sulfide nanoparticles, but also introduces magnetism with the level of 24.1 emu g^-1 at 14 kOe. Surface modification with monocarboxyl-terminated poly(ethylene glycol) (MPEG-COOH) has the role of deaggregating the composite nanoparticles to be with average hydrodynamic size of 27.3 nm and improving the dispersion and the stability of the composite nanoparticles in water.     

Ex vivo assessment of polyol coated-iron oxide nanoparticles for MRI diagnosis applications: toxicological and MRI contrast enhancement effects

Polyol synthesis is a promising method to obtain directly pharmaceutical grade colloidal dispersion of superparamagnetic iron oxide nanoparticles (SPIONs). Here, we study the biocompatibility and performance as T2-MRI contrast agents (CAs) of high quality magnetic colloidal dispersions (average hydrodynamic aggregate diameter of 16-27 nm) consisting of polyol-synthesized SPIONs (5 nm in mean particle size) coated with triethylene glycol (TEG) chains (TEG-SPIONs), which were subsequently functionalized to carboxyl-terminated meso-2-3-dimercaptosuccinic acid (DMSA) coated-iron oxide nanoparticles (DMSA-SPIONs). Standard MTT assays on HeLa, U87MG, and HepG2 cells revealed that colloidal dispersions of TEG-coated iron oxide nanoparticles did not induce any loss of cell viability after 3 days incubation with dose concentrations below 50 μg Fe/ml. However, after these nanoparticles were functionalized with DMSA molecules, an increase on their cytotoxicity was observed, so that particles bearing free terminal carboxyl groups on their surface were not cytotoxic only at low concentrations (<10 μg Fe/ml). Moreover, cell uptake assays on HeLa and U87MG and hemolysis tests have demonstrated that TEG-SPIONs and DMSA-SPIONs were well internalized by the cells and did not induce any adverse effect on the red blood cells at the tested concentrations. Finally, in vitro relaxivity measurements and post mortem MRI studies in mice indicated that both types of coated-iron oxide nanoparticles produced higher negative T2-MRI contrast enhancement than that measured for a similar commercial T2-MRI CAs consisting in dextran-coated ultra-small iron oxide nanoparticles (Ferumoxtran-10). In conclusion, the above attributes make both types of as synthesized coated-iron oxide nanoparticles, but especially DMSA-SPIONs, promising candidates as T2-MRI CAs for nanoparticle-enhanced MRI diagnosis applications.     

Size-controlled synthesis of superparamagnetic iron oxide nanoparticles and their surface coating by gold for biomedical applications

The size mono-dispersity, saturation magnetization, and surface chemistry of magnetic nanoparticles (NPs) are recognized as critical factors for efficient biomedical applications. Here, we performed modified water-in-oil inverse nano-emulsion procedure for preparation of stable colloidal superparamagnetic iron oxide NPs (SPIONs) with high saturation magnetization. To achieve mono-dispersed SPIONs, optimization process was probed on several important factors including molar ratio of iron salts [Fe³⁺ and Fe²⁺], the concentration of ammonium hydroxide as reducing agent, and molar ratio of water to surfactant. The biocompatibility of the obtained NPs, at various concentrations, was evaluated via MTT (3-(4, 5-dimethylthiazol-2-yl)-2, 5-diphenyltetrazolium bromide) assay and the results showed that the NPs were non-toxic at concentrations <0.1 mg/mL. Surface functionalization was performed by conformal coating of the NPs with a thin shell of gold (∼4 nm) through chemical reduction of attached gold salts at the surface of the SPIONs. The Fe₃O₄ core/Au shell particles demonstrate strong plasmon resonance absorption and can be separated from solution using an external magnetic field. Experimental data from both physical and chemical determinations of the changes in particle size, surface plasmon resonance optical band, phase components, core–shell surface composition, and magnetic properties have confirmed the formation of the mono-dispersed core–shell nanostructure.     

Synthesis,characterization, and in vitro biological evaluation of highly stable diversely functionalized superparamagnetic iron oxide nanoparticles

In this article, we report the design and synthesis of a series of well-dispersed superparamagnetic iron oxide nanoparticles (SPIONs) using chitosan as a surface modifying agent to develop a potential T ₂ contrast probe for magnetic resonance imaging (MRI). The amine, carboxyl, hydroxyl, and thiol functionalities were introduced on chitosan-coated magnetic probe via simple reactions with small reactive organic molecules to afford a series of biofunctionalized nanoparticles. Physico-chemical characterizations of these functionalized nanoparticles were performed by TEM, XRD, DLS, FTIR, and VSM. The colloidal stability of these functionalized iron oxide nanoparticles was investigated in presence of phosphate buffer saline, high salt concentrations and different cell media for 1 week. MRI analysis of human cervical carcinoma (HeLa) cell lines treated with nanoparticles elucidated that the amine-functionalized nanoparticles exhibited higher amount of signal darkening and lower T ₂ relaxation in comparison to the others. The cellular internalization efficacy of these functionalized SPIONs was also investigated with HeLa cancer cell line by magnetically activated cell sorting (MACS) and fluorescence microscopy and results established selectively higher internalization efficacy of amine-functionalized nanoparticles to cancer cells. These positive attributes demonstrated that these nanoconjugates can be used as a promising platform for further in vitro and in vivo biological evaluations.     

Superparamagnetic nanocomposites based on poly(styrene-b-ethylene/butylene-b-styrene)/cobalt ferrite compositions

Magnetic nanoparticles were created in or around the sulfonated (s) polystyrene domains in a phase separated poly[styrene-b-(ethylene-co-butylene)-b-styrene)] block copolymer (BCP) using an in situ inorganic precipitation procedure. The sBCP was neutralized with a mixed iron/cobalt chloride electrolyte and the doped samples were converted to their oxides by reaction with sodium hydroxide and further washing with water. Transmission electron microscopy indicated the presence of nanoparticles in the 5–25 nm size range. The metal oxide particle structures were studied using select area electron diffraction, which revealed that they are of the cobalt iron oxide composition (CoFe₂O₄). These nanocomposites were shown, using a superconducting quantum interference device magnetometer, to be superparamagnetic at 300 K and ferrimagnetic at 5 K. Nanocomposites consisting of smaller particles have a blocking temperature of 70 K, whereas it was 140 K for larger particles.     

Instant magnetic labeling of tumor cells by ultrasound in vitro

Magnetic labeling of living cells creates opportunities for numerous biomedical applications. Here we describe an instantly cell magnetic labeling method based on ultrasound. We present a detailed study on the ultrasound performance of a simple and efficient labeling protocol for H-22 cells in vitro. High frequency focus ultrasound was investigated as an alternative method to achieve instant cell labeling with the magnetic particles without the need for adjunct agents or initiating cell cultures. Mean diameter of 168 nm dextran-T40 coated superparamagnetic iron oxide (SPIO) nanoparticles were prepared by means of classical coprecipitation in solution in our laboratory. H-22 tumor cells suspended in phosphate-buffered saline (PBS, pH=7.2) were exposed to ultrasound at 1.37 MHz for up to 120 s in the presence of SPIOs. The cellular uptake of iron oxide nanoparticles was detected by prussion blue staining. The viability of cells was determined by a trypan blue exclusion test. At 2 W power and 60 s ultrasound exposure in presence of 410 μg/ml SPIOs, H-22 cell labeling efficiency reached 69.4±6.3% and the labeled cells exhibited an iron content of 10.38±2.43 pg per cell. Furthermore, 95.2±3.2% cells remained viable. The results indicated that the ultrasound protocol could be potentially applied to label cells with large-sized magnetic particles. We also calculated the shear stress at the 2 W power and 1.37 MHz used in experiments. The results showed that the shear stress threshold for ultrasonically induced H-22 cell reparable sonoporation was 697 Pa. These findings provide a quantitative guidance in designing ultrasound protocols for cell labeling.     

Synthesis of carbon nanotubes and iron oxide nanoparticles in MW plasma torch with Fe(CO)5 in gas feed

The MW plasma torch (2.45 GHz) in the mixture of CH₄/H₂/Ar (42/430/1540 sccm) with added Fe(CO)₅vapors was used for the synthesis of iron oxide nanoparticles and carbon nanotubes. The particles with well-defined facets consisting of Fe₃O₄ and -Fe₂O₃ and self-assembled into long chains were produced at the power of 360 W. At higher power of 440-460 W the deposit contained significant amount of multi-walled carbon nanotubes covered by iron oxide nanoparticles. The diameter of CNTs was 8-20 nm. The particles had Fe₃O₄ and/or -Fe₂O₃ cores of spherical shape covered by a thin layer of carbon.     

Ferromagnetic resonance in Ni–Zn ferrite nanoparticles in different aggregation states

Ferrite nanoparticles of composition Zn_0.5Ni_0.5Fe₂O₄ were synthesized by forced hydrolysis in polyol from the corresponding zinc, nickel and iron acetates. By varying the preparation conditions, different aggregation states were obtained, ranging from isolated nanoparticles with average diameter of 5 nm, to clusters of some 20 nm, formed as well by nanoparticles with average diameter in the 5 nm range, as confirmed by X-ray diffraction and high resolution transmission electron microscopy. Ferromagnetic resonance measurements exhibited a ferrimagnetic behavior for both aggregation states at 77 K; at 300 K, however, isolated nanoparticles showed a superparamagnetic behavior while clustered ones remained ferrimagnetic with a broad linewidth. These results are interpreted on the basis of interactions between nanoparticles.     

Water-soluble magnetic nanoparticles with biologically active stabilizers

We present the results of the interaction of iron oxide nanoparticles with some biologically active surfactants, namely, oleic acid and cytotoxic alkanolamine derivatives. Physico-chemical properties, as magnetization, magnetite concentration and particle diameter, of the prepared magnetic samples were studied. The nanoparticle size of 11 nm for toluene magnetic fluid determined by TEM is in good agreement with the data obtained by the method of magnetogranulometry. In vitro cytotoxic effect of water-soluble nanoparticles with different iron oxide:oleic acid molar ratio were revealed against human fibrosarcoma and mouse hepatoma cells. In vivo results using a sarcoma mouse model showed observable antitumor action.     

Iron/iron oxides core-shell nanoparticles by laser pyrolysis: Structural characterization and enhanced particle dispersion

Well-dispersed nanoparticles with iron/iron carbide core and iron oxide shell structures may constitute an excellent magnetic material for different applications as magnetic nanofluids, contrast agents in magnetic resonance imaging, sensors and catalysts. Based on the ability of the CO₂ laser pyrolysis technique to synthesize nanoparticles of the Fe/Fe₂O₃ core-shell type, we further improve the powder dispersion by first collecting the nanoparticles in a toluene bubbler, positioned downstream and prior to the collection filter. Structural characterisation of the samples by electron microscopy and X-ray diffraction was performed. Conditions in which clusters contain a reduced number of nanoparticles (around 50) are evidenced. Mean core-shell particle sizes of 15 nm were estimated. Finally, preliminary results on the morphology of iron/iron oxide core-shell nanoparticles as hydrocarbon-based magnetic nanofluids are presented.     

Effect of ZnO as modifier on up and downconversion properties of Ho/Yb doped tellurite glasses

Optical absorption and photoluminescent properties of Ho³⁺/Yb³⁺ co-doped tellurite and zinc tellurite glasses are investigated. The effect of zinc oxide as a modifier on the luminescence properties of above mentioned samples has been explored. Two intense upconversion emission bands centered at 546 (⁵F₄ + ⁵S₂ → ⁵I₈) and 660 nm (⁵F₅ → ⁵I₈) are observed on excitation with 976 nm diode laser. Zinc oxide acts as a quencher for 976 nm excited upconversion emission. The up and downconversion emission spectra are recorded with 532 nm excitation source also. In this case zinc oxide improves the up and downconversion emissions. A large enhancement in upconversion intensity has been observed when Ho³⁺ ion is co-doped with Yb³⁺ ion. The dependence of upconversion intensities on excitation power and on temperature has also been studied. The power dependence study shows a quadratic dependence of the fluorescence intensity on the excitation power while a decrement in emission intensity of all the transitions at different rates with increase in temperature is observed in temperature dependence study. The possible mechanisms are also discussed in order to understand the upconversion and energy transfer processes.     

Magnetic and in vitro heating properties of implants formed in situ from injectable formulations and containing superparamagnetic iron oxide nanoparticles (SPIONs) embedded in silica microparticles for magnetically induced local hyperthermia

The biological and therapeutic responses to hyperthermia, when it is envisaged as an anti-tumor treatment modality, are complex and variable. Heat delivery plays a critical role and is counteracted by more or less efficient body cooling, which is largely mediated by blood flow. In the case of magnetically mediated modality, the delivery of the magnetic particles, most often superparamagnetic iron oxide nanoparticles (SPIONs), is also critically involved. We focus here on the magnetic characterization of two injectable formulations able to gel in situ and entrap silica microparticles embedding SPIONs. These formulations have previously shown suitable syringeability and intratumoral distribution in vivo. The first formulation is based on alginate, and the second on a poly(ethylene-co-vinyl alcohol) (EVAL). Here we investigated the magnetic properties and heating capacities in an alternating magnetic field (141 kHz, 12 mT) for implants with increasing concentrations of magnetic microparticles. We found that the magnetic properties of the magnetic microparticles were preserved using the formulation and in the wet implant at 37 °C, as in vivo. Using two orthogonal methods, a common SLP (20 W g⁻¹) was found after weighting by magnetic microparticle fraction, suggesting that both formulations are able to properly carry the magnetic microparticles in situ while preserving their magnetic properties and heating capacities.     

Synthesis and nonlinear light scattering of microemulsions and nanoparticle suspensions

Microemulsions composed of normal or inverse micellar solutions and aqueous suspensions of pristine (uncoated) or silica-coated iron oxide nanoparticles, mainly γ-Fe₂O₃, were synthesised and their optical limiting properties investigated. The microemulsions are colorless solutions with high transparency for visible wavelengths while the aqueous suspensions of iron oxide are of pale yellow colour. Optical limiting experiments performed in 2 mm cells using a f/5 optical system with a frequency doubled Nd:YAG laser delivering 5 ns pulses with 10 Hz repetition rate, showed clamping levels of ∼3 μJ for the suspensions of both pristine and silica-coated iron oxide nanoparticles. A strong photoinduced nonlinear light scattering was observed for the water-in-oil microemulsion and the aqueous suspensions of nanoparticles while oil-in-water microemulsions did not show a significant nonlinear effect. Measurements carried out using an integrating sphere further verified that the photoinduced nonlinear light scattering is the dominating nonlinear mechanism while the nonlinear absorption of iron oxide nanoparticles is negligible at 532 nm.     

Eu photoluminescence enhancement due to thermal energy transfer in Eu2O3-doped SiO2-B2O3-PbO2 glasses system

In this work, Eu³⁺-doped lead borosilicate glasses (SiO₂-B₂O₃-PbO₂) synthesized by fusion method had their optical properties investigated as a function of temperature. Atomic Force Microscopy images obtained for a glass matrix annealed at 350 and 500 °C show a precipitated crystalline phase with sizes 11 and 21 nm, respectively. Besides, as the temperature increases from 350 to 300 K a strong Eu³⁺ photoluminescence (PL) enhancement takes place. This anomalous feature is attributed to the thermally activated carrier transfer process from nanocrystals and charged intrinsic defects states to Eu³⁺ energy levels. In addition, the PL peaks in this temperature range were assigned to the Eu³⁺ transitions ⁵D₀→⁷F₂, at 612 nm, ⁵D₀→⁷F₁, at 595 nm, and ⁵D₀→⁷F₀, at 585 nm. It was also observed that the ⁵D₀→⁷F₃ and ⁵D₀→⁷F₄ PL bands at 655 and 700 nm, respectively, show a continuous decrease in intensity as the temperature increases.     

Textural and electronic characteristics of mechanochemically activated composites with nanosilica and activated carbon

Nanosilicas (A-50, A-300, A-500)/activated carbon (AC, S_BET = 1520 m²/g) composites were prepared using short-term (5 min) mechanochemical activation (MCA) of powder mixtures in a microbreaker. Smaller silica nanoparticles of A-500 (average diameter d_av = 5.5 nm) can more easily penetrate into broad mesopores and macropores of AC microparticles than larger nanoparticles of A-50 (d_av = 52.4 nm) or A-300 (d_av = 8.1 nm). After MCA of silica/AC, nanopores of non-broken AC nanoparticles remained accessible for adsorbed N₂ molecules. According to ultra-soft X-ray emission spectra (USXES), MCA of silica/AC caused formation of chemical bonds Si-O-C; however, Si-C and Si-Si bonds were practically not formed. A decrease in intensity of OK_α band in respect to CK_α band of silica/AC composites with diminishing sizes of silica nanoparticles is due to both changes in the surface structure of particles and penetration of a greater number of silica nanoparticles into broad pores of AC microparticles and restriction of penetration depth of exciting electron beam into the AC particles.     

Magnetic permeability based diagnostic test for the determination of the canine C-reactive protein concentration in undiluted whole blood

We describe an one-step 11-min magnetic permeability based two-site immunoassay for C-reactive protein (CRP) utilizing polyclonal anti-canine CRP antibody conjugated dextran iron oxide nanoparticles (79 nm) as superparamagnetic labels and polyclonal anti-canine CRP conjugated silica microparticles (15 to 40 μm) as carriers. An inductance based magnetic permeability reader was used to detect the target analyte, CRP, in 10 μL whole blood samples, by measuring the magnetic permeability increase of the silica microparticle sediment due to immuno complex superparamagnetic nanoparticles. Measurements on standards showed a linear response between 0 and 17.5 mg/L CRP. Measurements performed on 16 whole blood samples from mixed breeds showed good correlation with a commercially available ELISA assay.     

Core-shell structured iron nanoparticles well dispersed on montmorillonite

Iron nanoparticles have been successfully synthesized using sodium borohydride solution reduction of ferric trichloride hexahydrate in the presence of montmorillonite as an effective protective reagent and support as well. A combination of characterizations reveals the well disperse of these obtained iron nanoparticles supported on the external surface of clay with roughly spherical morphology and mean diameter of 55 nm. The particles are oxidation resistant well with iron core-iron oxide shell structure. The shell thickness of 3 nm remains almost invariable under ambient conditions. Discernable hysteresis loop reveals ferromagnetic behavior of the iron nanoparticles, which make them easy for magnetic separation and potential in some practical applications.     

Superparamagnetic poly(methyl methacrylate) nanoparticles surface modified with folic acid presenting cell uptake mediated by endocytosis

The encapsulation of superparamagnetic nanoparticles (MNPs) in polymeric nanoparticles (NPs) with modified surfaces can improve targeted delivery and induce cell death by hyperthermia. The goals of this study were to synthesize and characterize surface modified superparamagnetic poly(methyl methacrylate) with folic acid (FA) prepared by miniemulsion polymerization (MNPsPMMA-FA) and to evaluate their in vitro cytotoxicity and cellular uptake in non-tumor cells, murine fibroblast (L929) cells and tumor cells that overexpressed folate receptor (FR) β, and chronic myeloid leukemia cells in blast crisis (K562). Lastly, hemolysis assays were performed on human red blood cells. MNPsPMMA-FA presented an average mean diameter of 135 nm and a saturation magnetization (Ms) value of 37 emu/g of iron oxide, as well as superparamagnetic behavior. The MNPsPMMA-FA did not present cytotoxicity in L929 and K562 cells. Cellular uptake assays showed a higher uptake of MNPsPMMA-FA than MNPsPMMA in K562 cells when incubated at 37 °C. On the other hand, MNPsPMMA-FA showed a low uptake when endocytosis mechanisms were blocked at low temperature (4 °C), suggesting that the MNPsPMMA-FA uptake was mediated by endocytosis. High concentrations of MNPsPMMA-FA showed hemocompatibility when incubated for 24 h in human red blood cells. Therefore, our results suggest that these carrier systems can be an excellent alternative in targeted drug delivery via FR.     

Structural, optical and electrical characterization of antimony-substituted tin oxide nanoparticles

Antimony-doped tin oxide (ATO) nanostructures were prepared using chemical precipitation technique starting from SnCl₂, SbCl₃ as precursor compounds. The antimony composition was varied from 5 to 20 wt%. The lower resistance was observed at composition of Sn:95 and Sb:05, when compared with undoped and higher doping concentration of antimony. The average crystalline size of undoped and doped tin oxide was calculated from the X-ray diffraction (XRD) pattern and found to be in the range of 30-11 nm and it was further confirmed from the transmission electron microscopy (TEM) studies. The scanning electron microscopy (SEM) analysis showed that the nanoparticles agglomerates forming spherical-shaped particles of few hundreds nanometers. The samples were further analyzed by energy dispersive spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR) and electrical resistance measurements.     

Magnetic properties of iron loaded MCM-48 molecular sieves

Mesoporous molecular sieves of MCM-48 type were loaded with iron by the wet impregnation method, using Fe(III) nitrate or Fe(II) sulfate aqueous solutions as Fe sources, to obtain a magnetic porous composite. The iron loaded materials were characterized by XRD, N₂ adsorption and DRUV-vis and compared with the Si-MCM-48 host. Their magnetic properties were studied by measuring the hysteresis loops up to 1.5 T at different temperatures (5-300 K) and by magnetization vs. temperature curves following the conventional zero field cooling (ZFC) and field cooling (FC) protocols. Materials with high structure regularity and surface area are obtained, which exhibit a mixed paramagnetic and superparamagnetic behavior, arising in isolated iron ions inserted in the host framework, and in small iron oxide clusters or nanoparticles forming inside the pores, respectively. Larger hematite particles (8-13 nm) grown on the external surface provide a quite small ferromagnetic contribution to the hysteresis loop.