Fabrication, characterization, and measurement of viscosity of α-Fe2O3-glycerol nanofluids

Magnetic nanofluids, ferrofluids, are a special category of smart nanomaterials, consisting of stable dispersion of magnetic nanoparticles in different fluids. In this study, magnetic nanoparticles of hematite, α-Fe₂O₃, were prepared by solvothermal method using Fe(NO₃)₃ as a starting material. The nanoparticles were characterized by X-ray diffraction (XRD) and transmission electronic microscope (TEM).To the best of our knowledge, this is the first research on the rheological properties of nanofluids of α-Fe₂O₃ nanoparticles and glycerol. The experimental results showed that the viscosity of α-Fe₂O₃-glycerol nanofluids increases with increasing the particle volume fraction and decreases with increasing temperature. Our results clearly showed that the α-Fe₂O₃-glycerol nanofluids are non-Newtonian shear-thinning and their shear viscosity depends strongly on temperature. The experimental data were compared with some theoretical models. The measured values of the effective viscosity of nanofluids are underestimated by the theoretical models.     

Synthesis and characterization of functionalized core-shell γFe2O3-SiO2 nanoparticles

Amino and/or polyethyleneglycol (PEG) functionalized core-shell γFe₂O₃-SiO₂ magnetic nanoparticles were synthesized and characterized. Amino-PEG-functionalized core-shell nanoparticles have calibrated sizes and a good colloidal stability. These bi-functionalized core-shell nanoparticles are potentially useful as biocompatible particles for magnetically targeted chemotherapy.     

Synthesis and characterization of L10 FePt nanoparticles from Pt–Fe3O4 core-shell nanoparticles

Pt/Fe₃O₄ core-shell nanoparticles have been prepared by a modified polyol method. Pt nanoparticles were first prepared via the reduction of Pt(acac)₂ by polyethylene glycol-200 (PEG-200), and layers of iron oxide were subsequently deposited on the surface of Pt nanoparticles by the thermal decomposition of Fe(acac)₃. The nanoparticles were characterized by XRD and HR-TEM. The as-prepared Pt/Fe₃O₄ nanoparticles have a chemically disordered FCC structure and transformed into chemically ordered fct structure after annealing in reducing atmosphere (4% H₂, 96% Ar) at 700 °C. The ordered fct FePt phase has high magnetic anisotropy with coercivity reaching 7.5 kOe at room temperature and 9.3 kOe at 10 K.     

Single step thermal decomposition approach to prepare supported γ-Fe2O3 nanoparticles

γ-Fe₂O₃ nanoparticles supported on MgO (macro-crystalline and nanocrystalline) were prepared by an easy single step thermal decomposition method. Thermal decomposition of iron acetylacetonate in diphenyl ether, in the presence of the supports followed by calcination, leads to iron oxide nanoparticles supported on MgO. The X-ray diffraction results indicate the stability of γ-Fe₂O₃ phase on MgO (macro-crystalline and nanocrystalline) up to 1150 °C. The scanning electron microscopy images show that the supported iron oxide nanoparticles are agglomerated while the energy dispersive X-ray analysis indicates the presence of iron, magnesium and oxygen in the samples. Transmission electron microscopy images indicate the presence of smaller γ-Fe₂O₃ nanoparticles on nanocrystalline MgO. The magnetic properties of the supported magnetic nanoparticles at various calcination temperatures (350-1150 °C) were studied using a superconducting quantum interference device which indicates superparamagnetic behavior.     

Implications of nanoparticle concentration and size distribution in the superparamagnetic behaviour of aging-improved maghemite xerogels

Evolution of static magnetic properties of a set of enhanced γ-Fe₂O₃/SiO₂ nanocomposites with different iron concentration has been studied on the basis of their corresponding hysteresis loops, zero-field/field-cooled (ZFC/FC) magnetization curves and transmission electron microscopy images. The lack of coercivity in all compositions, as well as the fulfillment of the H/T scaling law by the magnetization above the blocking temperature of each system under study, evidence a superparamagnetic behaviour in the iron oxide nanoparticles. In order to study the influence of iron content in the unblocking processes of nanoparticles, ZFC curves under different applied magnetic fields have been fitted to a model considering the systems under study as a distribution of energy barriers. Depart from the superparamagnetic model is discussed considering interparticle interactions.     

Controlled flame synthesis of αFe<Subscript>2</Subscript>O<Subscript>3</Subscript> and Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanoparticles: effect of flame configuration,flame temperature,and additive loading

Superparamagnetic iron oxide nanoparticles are used in diverse applications, including optical magnetic recording, catalysts, gas sensors, targeted drug delivery, magnetic resonance imaging, and hyperthermic malignant cell therapy. Combustion synthesis of nanoparticles has significant advantages, including improved nanoparticle property control and commercial production rate capability with minimal post-processing. In the current study, superparamagnetic iron oxide nanoparticles were produced by flame synthesis using a coflow flame. The effect of flame configuration (diffusion and inverse diffusion), flame temperature, and additive loading on the final iron oxide nanoparticle morphology, elemental composition, and particle size were analyzed by transmission electron microscopy (TEM), high-resolution TEM (HR-TEM), energy dispersive spectroscopy (EDS), and Raman spectroscopy. The synthesized nanoparticles were primarily composed of two well known forms of iron oxide, namely hematite αFe₂O₃ and magnetite Fe₃O₄. We found that the synthesized nanoparticles were smaller (6–12 nm) for an inverse diffusion flame as compared to a diffusion flame configuration (50–60 nm) when CH₄, O₂, Ar, and N₂ gas flow rates were kept constant. In order to investigate the effect of flame temperature, CH₄, O₂, Ar gas flow rates were kept constant, and N₂ gas was added as a coolant to the system. TEM analysis of iron oxide nanoparticles synthesized using an inverse diffusion flame configuration with N₂ cooling demonstrated that particles no larger than 50–60 nm in diameter can be grown, indicating that nanoparticles did not coalesce in the cooler flame. Raman spectroscopy showed that these nanoparticles were primarily magnetite, as opposed to the primarily hematite nanoparticles produced in the hot flame configuration. In order to understand the effect of additive loading on iron oxide nanoparticle morphology, an Ar stream carrying titanium-tetra-isopropoxide (TTIP) was flowed through the outer annulus along with the CH₄ in the inverse diffusion flame configuration. When particles were synthesized in the presence of the TTIP additive, larger monodispersed individual particles (50–90 nm) were synthesized as observed by TEM. In this article, we show that iron oxide nanoparticles of varied morphology, composition, and size can be synthesized and controlled by varying flame configuration, flame temperature, and additive loading.     

Preparation, optical properties, magnetic properties and thermal stability of core-shell structure cobalt/zinc oxide nanocomposites

Cobalt nanoparticles coated with zinc oxide can form composite spheres with core-shell structure. This coating process was based on the use of silane coupling with agent 3-mercaptopropyltrimethoxysilane (HS-(CH₂)₃Si(OCH₃)₃, MPTS) as a primer to render the cobalt surface vitreophilic, thus it renders cobalt surface compatible with ZnO. X-ray photoelectron spectroscopy (XPS) was used to gain insight into the way in which the MPTS is bound to the surface of the cobalt nanoparticles. The morphological structure, chemical composition, optical properties and magnetic properties of the product were investigated by using transmission electron microscopy (TEM), X-ray diffraction (XRD), energy dispersive X-ray spectroscopy (EDS), photoluminescence (PL) spectroscope and vibrating sample magnetometer (VSM). It was found that the Co/ZnO core-shell structure nanocomposites exhibited both of favorable magnetism and photoluminescence properties. Results of the thermogravimetric analysis (TGA) and differential thermal analysis (DTA) indicated that the thermal stability of cobalt/zinc oxide was better than that of pure cobalt nanoparticles.     

Intriguingly high convective heat transfer enhancement of nanofluid coolants in laminar flows

We reported on investigation of the convective heat transfer enhancement of nanofluids as coolants in laminar flows inside a circular copper tube with constant wall temperature. Nanofluids containing Al₂O₃, ZnO, TiO₂, and MgO nanoparticles were prepared with a mixture of 55 vol.% distilled water and 45 vol.% ethylene glycol as base fluid. It was found that the heat transfer behaviors of the nanofluids were highly depended on the volume fraction, average size, species of the suspended nanoparticles and the flow conditions. MgO, Al₂O₃, and ZnO nanofluids exhibited superior enhancements of heat transfer coefficient, with the highest enhancement up to 252% at a Reynolds number of 1000 for MgO nanofluid. Our results demonstrated that these oxide nanofluids might be promising alternatives for conventional coolants.     

Size distribution of magnetic iron oxide nanoparticles using Warren–Averbach XRD analysis

We use the Fourier transform based Warren–Averbach (WA) analysis to separate the contributions of X-ray diffraction (XRD) profile broadening due to crystallite size and microstrain for magnetic iron oxide nanoparticles. The profile shape of the column length distribution, obtained from WA analysis, is used to analyze the shape of the magnetic iron oxide nanoparticles. From the column length distribution, the crystallite size and its distribution are estimated for these nanoparticles which are compared with size distribution obtained from dynamic light scattering measurements. The crystallite size and size distribution of crystallites obtained from WA analysis are explained based on the experimental parameters employed in preparation of these magnetic iron oxide nanoparticles. The variation of volume weighted diameter (D_v, from WA analysis) with saturation magnetization (M_s) fits well to a core shell model wherein it is known that M_s=M_bulk(1?6g/D_v) with M_bulk as bulk magnetization of iron oxide and g as magnetic shell disorder thickness.     

Synthesis and characterization of superparamagnetic iron oxide nanoparticles for biomedical applications

Monodisperse iron oxide nanoparticles (NPs) of 4 nm were obtained through high-temperature solution phase reaction of iron (III) acetylacetonate with 1, 2-hexadecanediol in the presence of oleic acid and oleylamine. The as-synthesized iron oxide nanoparticles have been characterized by X-ray diffraction, transmission electron microscopy, Mössbauer spectroscopy and magnetic measurements. The species obtained were Fe₃O₄ and/or $\upgamma$ -Fe₂O₃. These NPs are superparamagnetic at room temperature and even though the reduced particle size they show a high saturation magnetization (MS ≈ 90 emu/g).     

Application of factor analysis to XPS valence band of superparamagnetic iron oxide nanoparticles

X-Ray photoelectron spectra of nano-sized superparamagnetic iron oxide nanoparticles were examined with the aim to discriminate the different degree of iron oxidation. Careful analysis of the valence band regions reveals the presence of both Fe₃O₄ and Fe₂O₃. The application of factor analysis enabled us to extract the relative molar concentrations of these oxides in the nanoparticles. This is of particular interest in improving the magnetic properties of iron oxide nanoparticles whose superparamagnetic character can be optimized to obtain better contrast in images from nuclear magnetic resonance. As a result, the factor analysis allows tuning the nanoparticle synthesis conditions in order to obtain the optimal magnetic properties for imaging. Results obtained by the XPS valence band analysis were compared to the transmission electron microscopy, X-ray diffraction and Raman measurements.     

Synthesis and characterization of magnetite nanopowders

We have synthesized the iron oxide nanoparticles using the newly developed mechanical ultrasonication method with the FeSO₄ · 7H₂O. We have also investigated the crystallographic structural properties, morphology, and magnetic properties of the nanopowders. According to the high resolution X-ray diffraction result, the as-synthesized iron oxide nanoparticles were magnetite (Fe₃O₄). The particle size of the magnetite nanoparticles was about 6 nm confirmed by transmission electron microscopy image. The particle shape was almost a sphere confirmed by scanning electron microscopy image. The coercivity and saturation magnetization of the as-synthesized iron oxide nanopowders were 114 Oe, and 3.7 emu/g, respectively.     

Nanostructures of gold coated iron core-shell nanoparticles and the nanobands assembled under magnetic field

Pure metal iron nanoparticles are unstable in the air. By a coating iron on nanoparticle surface with a stable noble metal, these air-stable nanoparticles are protected from the oxidation and retain most of the favorable magnetic properties, which possess the potential application in high density memory device by forming self-assembling nanoarrays. Gold-coated iron core-shell structure nanoparticles (Fe/Au) synthesized using reverse micelles were characterized by transmission electron microscopy (TEM). The average nanoparticle size of the core-shell structure is about 8 nm, with about 6 nm diameter core and 1∼2 nm shell. Since the gold shell is not epitaxial growth related to the iron core, the morié pattern can be seen from the overlapping of iron core and gold shell. However, the gold shell lattice can be seen by changing the defocus of TEM. An energy dispersive X-ray spectrum (EDS) also shows the nanoparticles are air-stable. The magnetic measurement of the nanoparticles also proved successful synthesis of gold coated iron core-shell structure. The nanoparticles were then assembled under 0.5 T magnetic field and formed parallel nanobands with about 10 μm long. Assembling two dimensional ordered nanoarrays are still under going. Received 29 November 2000     

Ferrite-based magnetic nanofluids used in hyperthermia applications

Magnetic ferrofluids (magnetic nanofluids) have received special attention due to their various biomedical applications such as drug delivery and hyperthermia treatment for cancer. The biological applications impose some special requirements. For example, the well-known iron oxide ferrofluids become undesirable because their iron atoms are poorly distinguishable from those of hemoglobin. A conceivable solution is to use mixed-ferrites (MFe₂O₄ where M=Co, Mn, Ni, Zn) to have a range of magnetic properties. These ferrites have attracted special attention because they save time, and because of their low inherent toxicity, ease of synthesis, physical and chemical stabilities and suitable magnetic properties. Based on the importance of ferrite particles in ferrofluids for hyperthermia treatment, this paper gives a summary on the physical concepts of ferrofluids, hyperthermia principal, magnetic properties and synthesis methods of nanosized ferrites.     

Role of ligands in the formation, phase stabilization, structural and magnetic properties of α-Fe2O3 nanoparticles

The electrochemical synthesis of alpha Fe₂O₃ nanoparticles was performed using quaternary ammonium salts viz. TPAB, TBAB and TOAB in an organic medium by optimizing current density and molar concentration of the ligand. The role of ligands in the formation of α phase, structure and magnetic properties was investigated in details. The effect of increasing chain length on the particle size confirmed that as the chain length increases from propyl to octyl, the particle size decreases. X-ray diffraction spectra of as prepared samples and TEM analysis confirmed the amorphous nature of iron oxide. TEM showed beads of iron oxide joined together with a size distribution in the range of 6–30 nm. The Mossbauer studies also support this observation that for the lowest particle size, the line width is broader which successively reduces with increase in particle size. Iron oxide capped with TOAB indicated superparamagnetic nature at room temperature. The resultant internal magnetic field of 506 mm/s due to hyperfine splitting clearly established the formation of α-Fe₂O₃ The infrared spectroscopy and pH measurements revealed the binding of tetra alkyl ligand with iron oxide. The IR spectra and the increase in basicity of as prepared samples confirmed the formation of hydrated iron oxide. Above 800°C the spectra indicated only iron oxide. Surface area obtained by BET method was 205 m²/g.     

Synthesis of magnetic rhenium sulfide composite nanoparticles

Rhenium sulfide nanoparticles are associated with magnetic iron oxide through coprecipitation of iron salts with tetramethylammonium hydroxide. Sizes of the formed magnetic rhenium sulfide composite particles are in the range 5.5-12.5 nm. X-ray diffraction and energy-dispersive analysis of X-rays spectra demonstrate the coexistence of Fe₃O₄ and ReS₂ in the composite particle, which confirm the formation of the magnetic rhenium sulfide composite nanoparticles. The association of rhenium sulfide with iron oxide not only keeps electronic state and composition of the rhenium sulfide nanoparticles, but also introduces magnetism with the level of 24.1 emu g^-1 at 14 kOe. Surface modification with monocarboxyl-terminated poly(ethylene glycol) (MPEG-COOH) has the role of deaggregating the composite nanoparticles to be with average hydrodynamic size of 27.3 nm and improving the dispersion and the stability of the composite nanoparticles in water.     

Comparison between Experimental and Theoretical Thermal Conductivity of Nanofluids Containing Multi-walled Carbon Nanotubes Decorated with TiO2 Nanoparticles

This article reports the thermal conductivity modeling of nanofluids containing decorated multi-walled carbon nanotubes with TiO₂ nanoparticles. TiO₂ nanoparticles and decorated multi-walled carbon nanotubes are synthesized with different amounts of TiO₂ nanoparticles. The experimental results show that the measured thermal conductivities of TiO₂ nanofluids and multi-walled carbon nanotube nanofluids are higher than the predicted values by theoretical models. The comparison results of multi-walled carbon nanotube nanofluids and multi-walled carbon nanotube–TiO₂ nanofluids reveal that the predicted values by the Xue model are closer to the measured values. In addition, the results show that the thermal conductivity of nanofluids containing multi-walled carbon nanotube–TiO₂ increases with respect to TiO₂ content of hybrid.     

Color-tunable magnetic and luminescent hybrid nanoparticles: Synthesis, optical and magnetic properties

A facile method for synthesizing color-tunable magnetic and luminescent hybrid bifunctional nanoparticles is presented. A series of CdSe/ZnS core-shell quantum dots (QDs) with different sizes were successfully fabricated and self-assembled to Fe₃O₄ magnetic nanoparticles (MNP), which were subsequently coated with a polyethyleneimine (PEI) layer to prevent large aggregates. The hydrophobic QDs capped with trioctylphosphine oxide (TOPO) formed a coating surrounding MNP, and were transferred into hydrophilic phase by PEI with high efficiency. The samples were characterized by TEM, FT-IR, XRD, EDS, UV-vis spectrophotometer, fluorescent spectrophotometer and PPMS. Results show that the original properties of the nanoparticles were well-preserved in the hybrid structure. All MNP-QDs hybrid nanoparticles showed paramagnetic behavior and the nanocomposites were still highly luminescent with no shift in the PL peak position.     

Synthesis,characterization, and in vitro biological evaluation of highly stable diversely functionalized superparamagnetic iron oxide nanoparticles

In this article, we report the design and synthesis of a series of well-dispersed superparamagnetic iron oxide nanoparticles (SPIONs) using chitosan as a surface modifying agent to develop a potential T ₂ contrast probe for magnetic resonance imaging (MRI). The amine, carboxyl, hydroxyl, and thiol functionalities were introduced on chitosan-coated magnetic probe via simple reactions with small reactive organic molecules to afford a series of biofunctionalized nanoparticles. Physico-chemical characterizations of these functionalized nanoparticles were performed by TEM, XRD, DLS, FTIR, and VSM. The colloidal stability of these functionalized iron oxide nanoparticles was investigated in presence of phosphate buffer saline, high salt concentrations and different cell media for 1 week. MRI analysis of human cervical carcinoma (HeLa) cell lines treated with nanoparticles elucidated that the amine-functionalized nanoparticles exhibited higher amount of signal darkening and lower T ₂ relaxation in comparison to the others. The cellular internalization efficacy of these functionalized SPIONs was also investigated with HeLa cancer cell line by magnetically activated cell sorting (MACS) and fluorescence microscopy and results established selectively higher internalization efficacy of amine-functionalized nanoparticles to cancer cells. These positive attributes demonstrated that these nanoconjugates can be used as a promising platform for further in vitro and in vivo biological evaluations.     

Fabrication, characterization and measurement of thermal conductivity of Fe3O4 nanofluids

Magnetite Fe₃O₄ nanoparticles were synthesized by a co-precipitation method at different pH values. The products were characterized by X-ray diffraction, Fourier transform infrared spectroscopy, and transmission electronic microscopy. Their magnetic properties were evaluated on a vibrating sample magnetometer. The results show that the shape of the particles is cubic and they are superparamagnetic at room temperature. Magnetic nanofluids were prepared by dispersing the Fe₃O₄ nanoparticles in water as a base fluid in the presence of tetramethyl ammonium hydroxide as a dispersant. The thermal conductivity of the nanofluids was measured as a function of volume fraction and temperature. The results show that the thermal conductivity ratio of the nanofluids increases with increase in temperature and volume fraction. The highest enhancement of thermal conductivity was 11.5% in the nanofluid of 3 vol% of nanoparticles at 40 °C. The experimental results were also compared with the theoretical models.