First-principles energy band calculation for undoped and N-doped InTaO4 with layered wolframite-type structure

The electronic structures of undoped and N-doped InTaO₄ with optimized structures are calculated within the framework of the density functional theory. Calculated lattice constants are in excellent agreement with experimental values, within a difference of 2%. The valence band maximum (VBM) is located near the middle point on the ZD line and the conduction band minimum (CBM) near the middle point on the DX line. This means that InTaO₄ is an indirect-gap material and a minimum theoretical gap between VBM and CBM is ca. 3.7 eV. The valence band in the range from −6.0 to 0 eV mainly consists of O 2p orbitals, where In 4d5s5p and Ta 5d orbitals are slightly hybridized with O 2p orbitals. On the other hand, the conduction band below 5.5 eV is mainly composed of the Ta 5d orbitals and the contributions of In and O orbitals are small. The band gap of N-doped InTaO₄ decreases by 0.3 eV than that of undoped InTaO₄, because new gap states originating from N 2p orbitals appear near the top of the valence band. This result indicates that doping of N atoms into metal oxides is a useful method to develop photocatalysts sensitive to visible light.     

Thermoelectric properties of the Bi2−xYxRu2O7 (x=0-2) pyrochlores

Electrical conductivity and Seebeck coefficient for the Bi_2−xY_xRu₂O₇ pyrochlores with x=0.0,0.5,1.0,1.5,2.0 were measured in the temperature range of 473-1073 K in air. With increasing Bi content, the temperature dependence of the electrical conductivity changed from semiconducting to metallic. The signs of the Seebeck coefficient were positive in the measured temperature range for all the samples, indicating that the major carriers were holes. The temperature dependence of the Seebeck coefficient for the Y₂Ru₂O₇ indicated the thermal activation-type behavior of the holes, while that for the Bi_2−xY_xRu₂O₇ with x=0.0-1.5 indicated the itinerant behavior of the holes. The change in the conduction behavior from semiconductor to metal with increasing Bi content is consistent with the increase in the overlap between the Ru4d t_2g and O2p orbitals, but the mixing of Bi6s, 6p states at E_F may not be ruled out. The thermoelectric power factors for the Bi_2−xY_xRu₂O₇ with x=1.5 and 2.0 were lower than 10⁻⁵ W m⁻¹ K⁻² and those with x=0.0,0.5,1.0 were around 1-3×10⁻⁵ W m⁻¹ K⁻².     

Electronic structure,ferroelectricity and optical properties of CaBi<Subscript>2</Subscript>Ta<Subscript>2</Subscript>O<Subscript>9</Subscript>

Using first-principles calculations based on density-functional theory in its local-density approximation, we investigated the Electronic structure, ferroelectricity and optical properties of CaBi₂Ta₂O₉ (CBT) for the first time. It is found that CBT compound has an indirect band gap of 3.114 eV and the O 2s and 2p states are strongly hybridized with the 6s states of Bi which belong to the (Bi₂O₂)²⁺ planes. The quite strong Ta–O and Bi–O hybridization is the primary source for ferroelectricity. Our results imply that the interaction between Bi and O is highly covalent. The anisotropy occurs mainly above 4 eV in the optical properties. The different optical properties have been discussed.     

Electronic structure of the Sr2MgSi2O7:Eu persistent luminescence material

The electronic structures of the distrontium magnesium disilicate (Sr₂MgSi₂O₇(:Eu²⁺)) materials were studied by a combined experimental and theoretical approach. The UV-VUV synchrotron radiation was applied in the experimental study while the electronic structures were investigated theoretically by using the density functional theory. The structure of the valence and conduction bands and the band gap energy of the material as well as the position of the Eu²⁺ 4f ground state were calculated. The calculated band gap energy (6.7 eV) agrees well with the experimental value of 7.1 eV. The valence band consists mainly of the oxygen states and the bottom of the conduction band of the Sr states. The calculated occupied 4f ground state of Eu²⁺ lies in the energy gap of the host though the position depends strongly on the Coulomb repulsion strength. The position of the 4f ground state with respect to the valence and conduction bands is discussed using the theoretical and experimental evidence available.     

Electronic structure of Al2O3 from electron energy loss spectroscopy

The electronic structure of Al₂O₃ has been studied by electron energy loss spectroscopy (ELS), and an energy level model of both filled and empty states has been constructed from the ELS and available optical data. For the high temperature pyrolytic α-polycrystalline Al₂O₃ films, the transitions are assumed to originate at the two principal peaks in the valence band density of states and the O(2s) core state, and to terminate on two peaks within the conduction band density of states. We also report energy loss spectra due to excitations out of the deeper Al(2p), Al(2s), Al(1s), and O(1s) core levels. The excitations originating at the Al(2p), Al(2s), and Al(1s) core levels terminate on levels in the conduction band and on an exciton lying about 1 eV below the conduction-band edge.     

First-principles prediction of coexistence of magnetism and ferroelectricity in rhombohedral Bi2FeTiO6

First principles calculations based on the density functional theory within the local spin density approximation plus U(LSDA + U) scheme, show rhombohedral Bi₂FeTiO₆ is a potential multiferroic in which the magnetism and ferroelectricity coexist. A ferromagnetic configuration with magnetic moment of 4μB per formula unit has been reported with respect to the minimum total energy. Spontaneous polarization of 27.3 μC/cm², caused mainly by the ferroelectric distortions of Ti, was evaluated using the berry phase approach in the modern theory of polarization. The Bi-6s stereochemical activity of long-pair and the ‘d⁰-ness’ criterion in off-centring of Ti were coexisting in the predicted new system. In view of the oxidation state of Bi³⁺, Fe²⁺, Ti⁴⁺, and O²⁻ from the orbital-resolved density of states of the Bi-6p, Fe-3d, Ti-3d, and O-2p states, the valence state of Bi₂FeTiO₆ in the rhombohedral phase was found to be Bi³⁺₂Fe²⁺Ti⁴⁺O₆.     

Electronic structures and effective masses of photogenerated carriers of CaZrTi2O7 photocatalyst: First-principles calculations

The band structures, density of states and effective masses of photogenerated carriers for CaZrTi₂O₇ photocatalyst were performed using first principles method with the virtual crystal approximation. The results indicated that CaZrTi₂O₇ has an indirect band gap of about 3.25 eV. The upper valence bands of CaZrTi₂O₇ are formed by O 2p states mixed with Ti 3d states, Zr 4d, 4p and 5s states, while the conduction bands are dominated by Ti 3d states, Zr 4d states and O 2p states. The calculated valence bands maximum (VBM) potential is located at 2.60 V (vs. normal hydrogen electrode (NHE)), while the conduction bands minimum (CBM) potential at ?0.65 V. Therefore, CaZrTi2O7 has the ability to split water to hydrogen and oxygen under UV light irradiation. The calculated minimum effective mass of electron in CBM is about 1.35 m₀, and the minimum effective mass of hole in VBM is about 1.23 m₀. The lighter effective masses facilitate the migration of photogenerated carriers and improve photocatalytic performance.     

Electronic structure of HgGa2S4

The electronic structure and chemical bonding in HgGa₂S₄ crystals grown by vapor transport method are investigated with X-ray photoemission spectroscopy. The valence band of HgGa₂S₄ is found to be formed by splitted S 3p and Hg 6s states at binding energies BE=3-7 eV and the components at BE=7-11 eV generated by the hybridization of S 3s and Ga 4s states with a strong contribution from the Hg 5d states. At higher binding energies the emission lines related to the Hg 4f, Ga 3p, S 2p, S 2s, Hg 4d, Ga LMM, Ga 3p and S LMM states are analyzed in the photoemission spectrum. The measured core level binding energies are compared with those of HgS, GaS, AgGaS₂ and SrGa₂S₄ compounds. The valence band spectrum proves to be independent on the technological conditions of crystal growth. In contrast to the valence band spectrum, the distribution of electron states in the bandgap of HgGa₂S₄ crystals is found to be strongly dependent upon the technological conditions of crystal growth as demonstrated by the photoluminescence analysis.     

Improved calculation of band gap of Sr2Bi2O5 crystal using modified Becke–Johnson exchange potential

The electronic structure of Sr₂Bi₂O₅ is calculated by the scalar-relativistic full potential linearized augmented plane wave (FLAPW+lo) method using the modified Becke–Johnson potential combined with the local density approximation correlation (MBJ–LDA). Both the valence band maximum (VBM) and conduction band minimum (CBM) exist at the Γ-point, indicating that Sr₂Bi₂O₅ is a direct-band-gap material. The band gap is calculated to be 3.17 eV, which is very close to the experimental value. This result is in great contrast to the underestimation based on the GGA calculation. On the other hand, there is only a small difference in the effective masses of holes and electrons photogenerated near the VBM and CBM for the MBJ–LDA and GGA approaches. The optical properties of Sr₂Bi₂O₅ are calculated from the complex dielectric function ε(ω)=ε₁(ω)+iε₂(ω). A highly polarized peak is observed at 3.5 eV in the ε₂(ω) function. Furthermore, the absorption coefficient estimated from the MBJ–LDA is very similar to that from the experimental result.     

ELECTRONIC STRUCTURE OF BISMUTH MOLYBDENUM OXIDE SINGLE CRYSTAL Bi0.19MoO3

Single crystal Bi_0.19MoO₃ has been grown by fused salt electrolytic technique. X-ray powder diffraction shows that the unit cell parameters are: a=1.9985nm, b=0.4085nm and c=1.4437nm. The temperature dependence of resistivity demonstrates a semiconductor characteristic. X-ray photoemission spectroscopy studies provide that the valence band of Bi_0.19MoO₃ are made up of oxygen p_π and the π^*, π and σ bonding bands formed by orbital combination. The shoulder at 0.4 eV near the top of valence band may be formed from the non-bonding d_xy orbitals of some Mo atoms. The O1s core-electron spectrum reveals the presence of two inequivalent bonds of oxygen ions in Bi_0.19MoO₃. Bi4f core-level spectrum shows two bonding characters of Bi atoms in bismuth molybdenum oxide single crystals. Mo3d core-level spectrum could be decomposed into two kinds of valence states of molybdenum(Mo⁺⁵ and Mo⁺⁶).     

Electronic properties of Bi2O3 and MoO3 and relationships to oxidation catalysis

A semiempirical atom superposition and electron delocalization molecular orbital analysis of the bonding and electronic structure of MoO₃, oxygen deficient MoO₃, and the α, β, and δ phases of Bi₂O₃ has been made. It is found that both small — e.g. MoO₆ — and large — e.g. Mo₆O₂₄ — clusters are useful models for cation electronic structure within the theory used. From the calculations, an interpretation is given for all available optical and photoemission data for the oxides. The color, conductivity, and new photoemission peak of oxygen-deficient MoO₃ conducting bronzes are found to be due to the addition of electrons to the lowest of three Mo 5d bands which are empty in MoO₃. Weakly allowed d ← d transitions in the red are responsible for the color. Strongly allowed Mo 5d ← O 2p charge transfer excitations are responsible for the optical absorption above 3.2 eV. For the bismuth oxides, three occupied bands are found showing strong Bi 6s, 6p, 6d and O 2p hybridization. These bands have been seen experimentally. The highest band surprisingly has Bi 6p lone-pair character which is explained in terms of the relative Bi 6s and 6p and O 2p ionization potentials using perturbation theory. Rather similar electronic structures are found for the three phases despite their varying cation coordinations and structures. A charge transfer optical absorption edge at ～ 2.6 eV for the β form agrees well with observations reported in the literature, and similar edges should occur for the other phases. The cubic δ form has an unusual low-lying band suggesting absorption in the infrared. Our results provide insight into the surface properties of these oxides.     

Electronic structures of MRhO2, MRh2O4, RhMO4 and Rh2MO6 on the basis of X-ray spectroscopy and ESCA data

X-ray O Kα, Rh Mγ and a series of M Lα emission spectra, ESCA spectra of the valence and inner levels, and O K and Rh M_III quantum-yield spectra for X-ray photoemission of the rhodium double oxides MRhO₂ (M = Li, Na, K), MRh₂ O₄ (M = Be, Mg, Ca, Sr, Ba, Co, Ni, Cu, Zn, Cd, Pb), RhMO₄ (M = V, Nb, Ta) and Rh₂MO₆ (M = Mo, W) have been measured and the dependence of electronic structure on the metal M analysed. For all compounds the inner part of the valence band corresponds to O 2p_σ + O 2p_π + Rh 4d states, while the outer part corresponds to Rh 4d. The valence band is separated from the conduction band by a narrow gap of width less than 1 eV. The first empty band, near the bottom of the conduction band, is formed by Rh 4d states, followed by a band due to vacant O 2p states.     

Bi,Sn and Sb valence states in highT c (Bi,Pb/Sn,Sb)2Sr2Ca2Cu3Oy

The valence of Bi and its substituents Sn and Sb are investigated in the high temperature superconductor (Bi_0.8X_0.15Sb_0.05)₂Sr₂Ca₂Cu₃O_y (often denoted 2223) where X=Pb or Sn. Pb and Sn are isoelectronic with the valence states 2+ and 4+; Bi and Sb are as well with valence states 3+ and 5+. The valence state of Sn and Sb has been obtained from Mössbauer spectroscopy: they exist in the high charge states 4+ and 5+ respectively. Sn, Sb, and presumably Pb, take on the high valence state, and so furnish electrons to the conduction band. This is probably the reason why, although the (Pb, Sb)-doping aids in stabilizing the 2223 crystal structure, it is detremental to the electronic properties which lead to the superconducting phase. The valence state of Bi has been studied using X-ray photoelectron spectroscopy (XPS). These results show clearly that the Bi-based superconductor has a metal-like density of states at the Fermi level, and that the valence in the (Pb, Sb)-doped compounds is less than 3. This very surprising change in valence will have a profound effect on the superconducting properties, and is probably associated with the high valent states of Pb, Sn and Sb.     

First-principle study of electronic structure and stability of Sn0.5Sb0.5O2

A theoretical study on Sb-doped SnO₂ has been carried out by means of periodic density functional theory (DFT) at generalized gradient approximation (GGA) level. Stability and conductivity analyses were performed based on the formation energy and electronic structures. The results show that Sn_0.5Sb_0.5O₂ solid solution is stable because the formation energy of Sn_0.5Sb_0.5O₂ is −0.06 eV. The calculated energy band structure and density of states showed that the band gap of SnO₂ narrowed due to the presence of the Sb impurity energy levels in the bottom of the conduction band, namely there is Sb 5s distribution of electronic states from the Fermi level to the bottom of conduction band after the doping of antimony. The studies provide a theoretical basis to the development and application of Sn_1−xSb_xO₂ solid solution electrode.     

Exploring the electronic structure of Pb2+ ions containing material Pb16(OH)16(NO3)16

A theoretical band structure calculation for lead nitrate hydroxide Pb₁₆(OH)₁₆(NO₃)₁₆ single crystal was performed based on the experimental crystallographic data obtained by Chang et al. Calculations exhibit that the conduction band minimum (CBM) is situated at Γ the center of the Brillouin zone (BZ) while the valence band maximum (VBM) is located between Γ and Y points of the BZ, resulting in an indirect energy band gap of about 3.70 eV in close agreement to the measured one (3.78 eV). The angular momentum resolved projected density of states reveals the existence of the strong hybridization between the orbitals and the VBM is originated from Pb-6s/6p and O-2p orbitals while the CBM from N-2p and Pb-6p orbitals. The calculated valence electronic charge density distribution explore the bond characters and the dominancy of the covalent bonding between Pb–O of PbO_n ployhedra and N–O of [NO₃]⁻ triangle. The calculated bond lengths and angles show good agreement with the experimental data.     

Cross section and resonance effects in photoemission from Sn-doped In2O3(111)

Photoemission spectra of Sn-doped In₂O₃(111) have been measured using a range of photon energies between 40 and 1300 eV. The intensity of structure at the bottom of the valence band associated with states of mixed Sn 5s/O 2p character increases with increasing photon energy relative to that of states of more dominantly O 2p character at the top of the valence band, as expected from one electron ionisation cross sections. In addition a pronounced resonance in the intensity of a weak conduction band feature is observed around the In 4p core threshold.     

Band alignment of Ga2O3/6H-SiC heterojunction

A high-quality Ga₂O₃ thin film is deposited on an SiC substrate to form a heterojunction structure. The band alignment of the Ga₂O₃/6H-SiC heterojunction is studied by using synchrotron radiation photoelectron spectroscopy. The energy band diagram of the Ga₂O₃/6H-SiC heterojunction is obtained by analysing the binding energies of Ga 3d and Si 2p at the surface and the interface of the heterojunction. The valence band offset is experimentally determined to be 2.8 eV and the conduction band offset is calculated to be 0.89 eV, which indicate a type-II band alignment. This provides useful guidance for the application of Ga₂O₃/6H-SiC electronic devices.     

铁电体SrBi2Nb2O2电子能带结构的第一性原理研究

采用第一性原理的方法计算了SrBi₂Nb_2O.9（SBN）的顺电相、铁电相的电子结构.顺电相是间接带隙, 铁电相是直接带隙，它们的大小分别为1.57和2.23 eV.顺电相和铁电相的价带顶均主要来自于O₂p态的贡献.而顺电相和铁电相的导带底则分别来自Nb₄d态和Bi₆p态的贡献.计算表明SBN铁电相的低的漏电流与Bi 6p轨道有关.由顺电相到铁电相时，Nb₄d和O_{2 关键词： 顺电相 铁电相 态密度 电子能带结构}     

Potential parent compound of superconductor: Sr2CuM2As2O2 (M = Mn, Fe)

The electronic structure of Sr₂CuMn₂As₂O₂ and Sr₂CuFe₂As₂O₂ are studied by the first-principle calculations. These compounds have a body-centered-tetragonal crystal structure that consists of the CuO₂ layers similar to those in the high-Tc cuprate superconductor, and intermetallic MAs (M = Mn, or Fe) layers similar to the FeAs layers in high-Tc pnictides. Such special structure makes them as interesting candidates for new type of superconductor since they have two types of superconducting layers. However, our calculations indicate that the states in the range from −2.0 eV to +2.0 eV are dominated by Mn-3d or Fe-3d states, while the states of Cu-3d are far away from the Fermi level (in the range from −3.0 eV to −1.0 eV). Such results are significantly different with the Cu-based superconductor, like La₂CuO₄, where the states around Fermi level are dominated by Cu-3d states. Besides, we find that the mean-field magnetic ground state is the checkerboard antiferromagnetic in Cu sublattice and the stripe antiferromagnetic in Fe (or Mn) sublattice.     

Physical properties of the delafossite LaCuO2

High-quality LaCuO₂, elaborated by solid-state reaction in sealed tube, crystallizes in the delafossite structure. The thermal analysis under reducing atmosphere (H₂/N₂: 1/9) revealed a stoichiometric composition LaCuO_2.00. The oxide is a direct band-gap semiconductor with a forbidden band of 2.77 eV. The magnetic susceptibility follows a Curie-Weiss law from which a Cu²⁺ concentration of 1% has been determined. The oxygen insertion in the layered crystal lattice induces p-type conductivity. The electrical conduction occurs predominantly by small polaron hopping between mixed valences Cu^+/2+ with an activation energy of 0.28 eV and a hole mobility (μ_300 K=3.5×10⁻⁷ cm² V⁻¹ s⁻¹), thermally activated. Most holes are trapped in surface-polaron states upon gap excitation. The photoelectrochemical study, reported for the first time, confirms the p-type conduction. The flat band potential (V_fb=0.15 V_SCE) and the hole density (N_A=5.8×10¹⁷ cm⁻³) were determined, respectively, by extrapolating the curve C⁻² versus the potential to their intersection with C⁻²=0 and from the slope of the linear part in the Mott-Schottky plot. The valence band is made up of Cu-3d orbital, positioned at 4.9 eV below vacuum. An energy band diagram has been established predicting the possibility of the oxide to be used as hydrogen photocathode.