厅堂声学计算机模型的应用(英)

此处所介绍的厅堂声学计算机模型计算了房间和多功能厅的声学响应。这个模型是以房厅的三维表示为基础的。每个墙面都赋予一个吸声系数,并且分成更小的单元。首先计算了单元间影响系数所组成的矩阵。对于给定的声源,可以计算每个单元收到的能量,并由此定出房厅内任一点的声级,这样又能够算出（ａ）随距离变化的衰减,（ｂ）在任一平面上的声照度,和（ｃ）任一点所收到声能的接收指向性．可以算出房厅内任一被选定点的回波图,作为接收器所在地接收指向性随时间的演变;这么一个特点使得有可能核对目视图象和声图象之间的可能不符。这个软件能够设法任意修改房间的形状,以最优化房间的声学特征．本文列举了一个厅堂声学的研究例,是关于沙特拉伯首都Ｒｉｙａｄｈ的 Ａｈｕｒａ主厅的。     

1

此处所介绍的厅堂声学计算机模型计算了房间和多功能厅的声学响应。这个模型是以房厅的三维表示为基础的。每个墙面都赋予一个吸声系数,并且分成更小的单元。首先计算了单元间影响系数所组成的矩阵。对于给定的声源,可以计算每个单元收到的能量,并由此定出房厅内任一点的声级,这样又能够算出     

科特迪瓦共和国剧场声学设计与缩尺声学模型试验

科特迪瓦共和国剧场包括主演出厅、第二演出厅、排练厅和各种配套用房。此外还有科方自建的露天剧场，它构成了供和国首都阿比让市的演出中心，由于三个厅室各有其主要功能、且音质要求较高，故分别进行了声学设计，并对其中的主演出厅作了缩心声学模拟试验，以弥补声学计算上的不足，本报告简述共和国剧场各厅声学设计指标的确定，以及为达到预期声学效果所采取的各项技术措施。     

国际声学联合会议在欧洲举行

１９９９年３月１４日至１９日,在德国柏林举行了第１３７届美国声学学会大会暨第二届欧洲声学大会（声学论坛）及第２５届德国声学大会．此次国际声学联合大会是由美国声学学学会（ＡＳＡ）、欧洲声学学会（ＥＡＡ）、及德国声学学会（ＤＥＧＡ）三家共同举办的．来自世界３４个国家或地区的近２０００人参加了会议．分１４个大主题,１９８个分会、收到论文１９５５篇．本次大会旨在推动国际声学各领域的研究,虽称地区性会议,但会议内容涉及声学的各个方面,可称本世纪最后一次全球性的声学会议．会议分的１４个大主题分别为：建筑声学…     

一种改进的DNN-HMM的语音识别方法*

针对深度神经网络与隐马尔可夫模型(DNN-HMM)结合的声学模型在语音识别过程中建模能力有限等问题,提出了一种改进的DNN-HMM模型语音识别算法。首先根据深度置信网络(DBN)结合深度玻尔兹曼机(DBM),建立深度神经网络声学模型,然后提取梅尔频率倒谱系数(MFCC)和对数域的Mel滤波器组系数(Fbank)作为声学特征参数,通过TIMIT语音数据集进行实验。实验结果表明:结合了DBM的DNN-HMM模型相比DNN-HMM模型更具优势,其中,使用MFCC声学特征在词错误率与句错误率方面分别下降了1.26%和0.20%。此外,使用默认滤波器组的Fbank特征在词错误率与句错误率方面分别下降了0.48%和0.82%,并且适量增加滤波器组可以降低错误率。总之,研究取得句错误率与词错误率分别降低到21.06%和3.12%的好成绩。     

含空腔的功能梯度声学覆盖层水下吸声特性

针对传统的声学覆盖层吸声频带窄的问题,基于功能梯度材料的特点提出了一种含空腔结构的水下功能梯度声学覆盖层结构,引入梯度有限元法建立了功能梯度型声学覆盖层的水下声学计算模型,研究了功能梯度声学覆盖层结构的水下吸声特性。与传统的功能梯度结构声学建模方法相比,在保证计算精度和计算效率的基础上,文中所建立的功能梯度结构声学计算模型可适用于更复杂的功能梯度声学结构声学性能评估。研究结果表明,功能梯度声学覆盖层能够有效改善中高频段的吸声性能,获得较好的宽频吸声效果。此外,空腔形状采用锥型空腔结构或者组合型空腔结构可以有效地拓宽功能梯度声学覆盖层的吸声频带。      

第七届近代声学(超声学)国际研讨会在南京举行

第七届近代声学（超声学）国际研讨会于１９９８年１０月１１－１４日在南京金陵饭店举行。会议由国家教育部批准,并得到国家自然科学基金委员会、江苏省教委、省科协和省声学学会的支持和赞助。本届会议由南京大学和美国ＩＥＥＥＵＦＦＣ分会以及意大利理论物理中心（ＩＣＴＰ）共同主办．同时还得到汕头超声波仪器研究所的赞助．南京大学声学研究所所长张淑仪院士和美国加州大学Ｉｒｖｉｎｅ分校蔡振水教授（ＩＥＥＥ著名超声专家）担任会议联合主席．本届会议共收到论文１１０篇,４０％来自国外,其中特邀报告３０篇,会议论文内容丰富…     

大气声学:关于现象、原理和应用的综述(续)

二、“现代”大气声学1．重力和科里奥利（Coriolis）力对声传播的影响（1）声重力波和内重力波重力场对寻常声波（包括可听声和频率较高的次声，当然更包括超声，但因后者在空气中衰减太快，不能成为大气声学研究对象）的影响完全可以忽略，但当频率低到一定程度时就必须考虑这种影响了．声波中的运动加速度与频率的平方成正比，对于寻常声波，这一加速度的数值远比重力加速度g大．但当频率的数量级约为g/c时，这两个加速度就属于同数量级的了．实际上，因重力作用，大气密度随高度增加而减小．例如，对于频率为g／c0．029Hz的声波，其波…     

一种基于开口空心球的声学超材料

提出了一种基于局域共振的开口空心球(spilt hollow spheres,SHS)模型,数值计算和声学透射实验结果表明基于该模型的声学超材料可以实现负的弹性模量.为了说明SHS的局域共振性质,研究了微结构SHS几何尺寸(例如开口孔径d和空心球直径D)变化时材料的透射性质,结果表明SHS的几何尺寸的改变对声学超材料的透射吸收峰频率有显著影响.另外,还研究了SHS不同排列方式对透射行为的影响,发现单层样品中SHS单元数目以及晶格常数的变化不会引起谐振频率的变化,但是随着SHS单元数目或者样品 关键词： 开口空心球(SHS) 声学超材料 吸收峰 等效弹性模量     

广东星海音乐厅室内乐厅的声学设计

室内乐厅是以演奏室内乐为主、兼供独奏(唱)、音乐讲座、文娱演出和立体电影所用的多功能厅堂。为使各项功能均具有最佳的声学条件,设置了用计算机调控混响时间的装置。本文概要介绍室内乐厅的声学设计、但侧重于计算机调控混响时间所取得的成效。     

Three-dimensional modeling of hearing in Delphinus delphis.

Physical modeling is a fertile approach to investigating sound emission and reception (hearing) in marine mammals. A method for simulation of hearing was developed combining three-dimensional acoustic propagation and extrapolation techniques with a novel approach to modeling the acoustic parameters of mammalian tissues. Models of the forehead and lower jaw tissues of the common dolphin, Delphinus delphis, were created in order to simulate the biosonar emission and hearing processes. This paper outlines the methods used in the hearing simulations and offers observations concerning the mechanisms of acoustic reception in this dolphin based on model results. These results include: (1) The left and right mandibular fat bodies were found to channel sound incident from forward directions to the left and right tympanic bulla and to create sharp maxima against the lateral surfaces of each respective bulla; (2) The soft tissues of the lower jaw improved the forward directivity of the simulated receptivity patterns; (3) A focal property of the lower-jaw pan bones appeared to contribute to the creation of distinct forward receptivity peaks for each ear; (4) The reception patterns contained features that may correspond to lateral hearing pathways. A "fast" lens mechanism is proposed to explain the focal contribution of the pan bones in this dolphin. Similar techniques may be used to study hearing in other marine mammals.     

Experimental Estimation of the Emission Directivity of a Moving Surface Vessel in Shallow Water

The possibility of constructing an acoustic model of a surface ship’s noise emission in the far field using monopole-type emitters uniformly distributed along the hull is investigated. Experimental data obtained in shallow water are used to calculate the characteristics of equivalent monopole emission sources that form a total sound field similar to the sound field from a moving surface ship. The powers of each monopole and the cross-correlations between them are calculated. For the selected discrete components and linear model of an extended source, the directivity patterns are constructed, reduced to the free space. In the experiments and calculations, technical tools and algorithms were used that ensure high-precision positioning of the vessel with respect to the receiving elements of the array. An equivalent model of the waveguide transfer function in the operations area was preliminarily obtained by acoustic waveguide calibration using specially developed equipment, experimental techniques, and processing algorithms. This made it possible to use adequate seafloor models and the waveguide transfer function when calculating the equivalent sound field and directivity pattern. Good agreement is shown between the calculated and experimental data, both of the directivity pattern and field distribution along the transit characteristics. Practical recommendations are given for developing methods to measure the noise fields of surface vessels.

     

内部体积源作用下的圆柱壳内外声场特性

圆柱壳内各型体积源辐射噪声特性研究是声场建模和声场预报的前提.为了研究具有指向性的大尺度体积源特性对水下航行器结构内外声场的影响,本文结合薄壳理论、等效源和柱腔Green函数构造了体积源激励下的壳体振动耦合方程,研究了体积源表面声散射作用和指向性强弱对圆柱壳内外声场的影响.数值计算结果表明,体积源构造的准确性与其等效源位置有关,等效源配置在体积源几何中心与其结构表面之间0.4—0.6时,可以提高声场计算结果的准确性;大尺度体积源表面的声散射作用会导致壳体内部声场结构发生改变,内声场声腔共振峰发生偏移,并且在部分频段引起较强的声透射现象;此外,体积源指向性变化对壳体内外声场强弱影响较小,其显著作用表现在改变了外辐射声场的远场指向性.该研究结果对噪声预报和控制有一定的参考价值.     

Laser generation of narrow-band and directed ultrasound

An aluminium hemicylindrical sample has been irradiated with an array of laser lines, with each line acting as a source of acoustic waves. Detection of the generated ultrasonic waves was performed using both a wide-band stabilized Michelson interferometer and a 20 MHz piezoelectric transducer. Experimental and theoretical results are presented which reveal that the use of a spatially modulated laser source produces significant narrow-banding of the detected ultrasound, compared with a single point or single line source case. Additionally, for a given line spacing, ultrasound of a particular frequency can be directed. Owing to the nature of the acoustic signals generated by each individual array element, superposition of several signals does not result in any energy directivity similar to that encountered in phase electromagnetic array antennas. While time or frequency feature enhancement may be obtained in a desired direction, in most cases the far field energy directivity pattern is simply the incoherent sum of the energy directivity of each array element.     

含损伤黏弹性阻尼加筋层合板声功率和指向性变异*

该文旨在研究损伤位置和程度对自由阻尼加筋层合板声辐射功率和指向性的影响。基于Mindlin和Timoshenko梁理论,建立了自由阻尼层合板-梁组合结构有限元模型。数值求解四边简支边界条件自由阻尼加筋层合板振动响应,继而通过Rayleigh积分计算加筋层合板辐射声功率和指向性。将计算得到的前4阶模态固有频率、声辐射功率与指向性与已有文献进行了对比基本一致,验证了数值模型的正确性。最后,详细讨论了损伤位置和程度对自由阻尼加筋层合板固有频率、振型、声辐射功率和指向性的影响,结果表明：随着结构损伤程度的增大,声辐射功率峰值向低频移动,在更多角度上出现明显的指向性;声辐射功率和指向性对损伤位置比损伤程度更加敏感。     

基于联合波叠加法的浅海信道下圆柱壳声辐射研究

针对浅海信道下弹性结构声辐射预报尚无高效可靠的研究方法,提出了一种浅海信道下弹性结构声辐射快速预报的联合波叠加法.该方法结合了浅海信道传输函数、多物理场耦合数值计算法和波叠加法理论,运用该方法可对浅海信道下弹性结构辐射声场进行快速预报.经数值法和解析解法验证后,从信道下辐射源、环境影响和辐射声场测量的角度研究分析了浅海信道下弹性圆柱壳的声辐射特性,阐释了进行浅海信道下结构声辐射研究的必要性.研究结果表明,仅在低频浅海信道下弹性结构可近似等效为点源,信道上下边界对声场产生显著的耦合影响,高频段的空间声场指向性分布尤为明显,垂直线列阵进行信道下结构辐射声功率测量时,测量结果受到信道环境边界和潜深的影响较大.     

Design of a multipolar weighting for acoustic antennae

This work describes the development of an acoustic antenna for which several kinds of weightings have been studied to obtain a narrow directivity with attenuated rear lobes. Later, this antenna will be used in a new device to measure the sound absorption coefficient of flat panels in industrial sites. It is often necessary, although quite difficult, to measure acoustic absorption coefficients in partially diffuse conditions, because predicting the sound pressure level at, for instance, a workplace requires in situ characterization of the facings. This antenna has been optimized so that the major part of the received acoustic energy would come from one portion only of an investigated facing present in an industrial room. The multipolar weighting is quite efficient because the associated directivity can be carried out with a limited number of microphones. The calculation technique is improved to achieve a constant sensitivity antenna within the desired frequency range with most of the secondary lobes rejected. The designed receiving system is composed of four antennae, each equipped with five sensors. The directivity, at 150-5000 Hz range, has been verified in an anechoic room.     

Directivity calculation with experimental verification for a conformal array of underwater acoustic transducers

The radiation directivity of a complicated conformal array of underwater acoustic transducers is presented based on the boundary ＂element method. It includes the element directivity of each transducer, the natural beam pattern and the controlled beam pattern of the transducer array. At first, the boundary element model of the conformal array is built up, and then the boundary condition is exerted on the model according to the design and environment in which the transducer array is used, and the radiation directivity of the conformal array is calculated. An experiment has been done to measure the directivity in an anechoic water tank. The calculated and the experimental results are compared and analyzed. They are consistent to each other. It is shown that the boundary element method together with the detailed calculations is successful to simulate and predict the radiation directivity of an underwater acoustic transducer array.     

Acoustic characteristics of pulse detonation engine with ellipsoidal reflector

Acoustic characteristics of a pulse detonation engine(PDE) with and without an ellipsoidal reflector are numerically and experimentally investigated. A two-dimensional(2 D) non-splitting unstructured triangular mesh Euler solver based on the space-time conservation element and solution element(CE/SE) method is employed to simulate the flow field of a PDE.The numerical results clearly demonstrate the external flow field of the PDE. The effect of an ellipsoidal reflector on the flow field characteristic near the PDE exit is investigated. The formation process of reflected shock wave and reflected jet shock are reported in detail. An acoustic measurement system is established for the PDE acoustic testing. The experimental results show that the ellipsoidal reflector changes the sound waveform and directivity of PDE sound. The reflected shock wave and reflected jet shock result in two more positive pressure peaks in the sound waveform. The ellipsoidal reflector changes the directivity of PDE sound from 20 to 0. It is found that the peak sound pressure level(PSPL) and overall sound pressure level(OASPL) each obtain an increment when the PDE is installed with a reflector. The maximum relative increase ratio of PSPL and OASPL are obtained at the focus point F2, whose values are 6.1% and 6.84% respectively. The results of the duration of the PDE sound indicate that the reflecting and focusing wave generated by the reflector result in the increment of A duration and B duration before and near focus point F2. Results show that the ellipsoidal reflector has a great influence on the acoustic characteristic of PDE sound. The research is helpful for understanding the influence of an ellipsoidal reflector on the formation and propagation process of PDE sound.