First-principles study of structural, elastic, electronic, and optical properties of hexagonal BiAlO3

The structural parameters, elastic, electronic, and optical properties of hexagonal BiAlO₃ were investigated by the density functional theory. The calculated structural parameters are in good agreement with previous calculation and experimental data. The structural stability of BiAlO₃ has been confirmed by calculation of the elastic constants. The energy band structure, density of states, and Mulliken charge populations were obtained. BiAlO₃ presents an indirect band gap of 3.28 eV. Furthermore, the optical properties were calculated and analyzed. It is shown that BiAlO₃ is a promising dielectric material.     

First-principles study of the structural and thermodynamic properties of AsNMg3 antiperovskite

The structural and elastic properties of the antiperovskite semiconductor AsNMg₃ are investigated using the full-potential linearized augmented plane wave plus local orbital (FP-LAPW+lo) method within the generalized gradient in the frame of the density functional theory. The ground state properties such as lattice constant, bulk modulus, pressure derivative of the bulk modulus and elastic constants are in good agreement with numerous experimental and theoretical data. Through the quasi-harmonic Debye model, in which the phononic effects are considered, we have obtained successfully the thermodynamic properties such as the thermal expansion coefficient, Debye temperature and specific heats in the whole pressure range from 0 to 30 GPa and temperature range from 0 to 1200 K.     

Structural, electronic, elastic and thermal properties of Mg2Si

First-principles calculations of the lattice parameter, electron density maps, density of states and elastic constants of Mg₂Si are reported. The lattice parameter is found to differ by less than 0.8% from the experimental data. Calculations of density of states and electron density maps are also performed to describe the orbital mixing and the nature of chemical bonding. Our results indicate that the bonding interactions in the Mg₂Si crystal are more covalent than ionic. The quasi-harmonic Debye model, by means of total energy versus volume calculations obtained with the plane-wave pseudopotential method, is applied to study the elastic, thermal and vibrational effects. The variations of bulk modulus, Grüneisen parameter, Debye temperature, heat capacity C_v, C_p and entropy with pressure P up to 7 GPa in the temperature interval 0-1300 K have been systemically investigated. Significant differences in properties are observed at high pressure and high temperature. When T<1300 K, the calculated entropy and heat capacity agree reasonably with available experimental data. Therefore, the present results indicate that the combination of first-principles and quasi-harmonic Debye model is an efficient approach to simulate the behavior of Mg₂Si.     

First-principles study of elastic and thermo-physical properties of kesterite-type Cu2ZnSnS4

The lattice constants and elastic constants of the kesterite-type Cu₂ZnSnS₄ have been calculated using density-functional theory (DFT). The calculated lattice constants are in good agreement with the experimental data. The calculated elastic constants indicate that the bonding strength along the [1 0 0] and [0 1 0] directions is as strong as the one along the [0 0 1] direction. The high B/G ratio shows that the kesterite-type Cu₂ZnSnS₄ compound has ductile behavior. Finally, using the Debye model, the volume, bulk modulus and heat capacity as a function of temperature for the kesterite-type CZTS have been estimated at different pressures. The Debye temperature and Gruneisen parameter are 157 K and 2.28 at 300 K temperature, respectively. The present results can give some information for the design of the kesterite-type CZTS compounds, and these can also be used to stimulate future experimental and theoretical work.     

Structural and elastic properties under pressure effect of the cubic antiperovskite compounds ANCa3 (A = P, As, Sb, and Bi)

Using first-principles density functional calculations, the effect of high pressures, up to 40 GPa, on the structural and elastic properties of ANCa₃, with A = P, As, Sb, and Bi, were studied by means of the pseudo-potential plane-waves method. Calculations were performed within the local density approximation and the generalized gradient approximation for exchange-correlation effects. The lattice constants are in good agreement with the available results. The elastic constants and their pressure dependence are calculated using the static finite strain technique. We derived the bulk and shear moduli, Young's modulus, Poisson's ratio and Lamé's constants for ideal polycrystalline ANCa₃ aggregates. By analysing the ratio between the bulk and shear moduli, we conclude that ANCa₃ compounds are brittle in nature. We estimated the Debye temperature of ANCa₃ from the average sound velocity. This is the first quantitative theoretical prediction of the elastic properties of PNCa₃, AsNCa₃, SbNCa₃, and BiNCa₃ compounds, and it still awaits experimental confirmation.     

Electronic structure,elastic and thermodynamic properties of α-phase Na3N under pressure from first principles

The structural, electronic, elastic and thermodynamic properties of α-phase Na₃N under pressure are investigated by performing first principles calculations within generalized gradient approximation. The elastic constants, bulk modulus, shear modulus, Young's modulus, and Poisson's ratio dependencies on pressure are also calculated. The thermodynamic properties of the α-phase Na₃N are calculated using the quasi-harmonic Debye model. The dependencies of the heat capacity and the thermal expansion coefficient, as well as the Grüneisen parameter on pressure and temperature are investigated systematically in the ranges of 0–1 GPa and 0–100 K.     

Structural,mechanical and thermal properties of some Holmium Pnictides under pressure: A theoretical approach

The high pressure structural, elastic and thermal properties of holmium pnictides HoX (X=N, P, As and Bi) were investigated theoretically by using an inter-ionic potential theory with modified ionic charge parameter. We have predicted a structural phase transition from NaCl (B₁) to CsCl (B₂)-type structure at pressure of 139 GPa for HoN, 52 GPa for HoP, 44 GPa for HoAs and 26 GPa for HoBi. Other properties, such as lattice constant, bulk modulus, cohesive energy, second and third-order elastic constants were calculated and compared with the available experimental and theoretical data. In order to gain further information the brittle behaviour of these compounds was observed. Some other properties like Shear modulus (G), Young's modulus (E), Poisson's ratio (ν), anisotropy factor (A), sound velocities, Debye temperature (θ_D) were calculated. The variation of elastic constants (C₁₁ and C₄₄) and Debye temperature (θ_D) with pressure was also presented.     

Elastic and thermodynamic properties of CaB6 under pressure from first principles

The elastic and thermodynamic properties of CsCl-type structure CaB₆ under high pressure are investigated by first-principles calculations based on plane-wave pseudopotential density functional theory method within the generalized gradient approximation (GGA). The calculated lattice parameters of CaB₆ under zero pressure and zero temperature are in good agreement with the existing experimental data and other theoretical data. The pressure dependences of the elastic constants, bulk modulus B (GPa), and its pressure derivative B′, shear modulus G, Young's modulus E, elastic Debye temperature Θ_B, Zener's anisotropy parameter A, Poisson ratios σ, and Kleinmann parameter ζ are also presented. An analysis for the calculated elastic constants has been made to reveal the mechanical stability of CaB₆ up to 100 GPa. The thermodynamic properties of the CsCl-type structure CaB₆ are predicted using the quasi-harmonic Debye model. The pressure-volume-temperature (P-V-T) relationship, the variations of the heat capacity C_V, Debye temperature Θ_D, and the thermal expansion α with pressure P and temperature T, as well as the Grüneisen parameters γ are obtained systematically in the ranges of 0-100 GPa and 0-2000 K.     

First-principles calculations of structural and thermodynamic properties of Y 3Al5O12

The pseudo-potential plane-wave method using the generalized gradient approximation (GGA) within the framework of the density functional theory is applied to study the structural and thermodynamic properties of Y ₃Al₅O₁₂. The lattice constants and bulk modulus are calculated. They keep in good agreement with other theoretical data and experimental results. The quasi-harmonic Debye model, in which the phononic effects are considered, is applied to the study of the thermodynamic properties. The temperature effect on the structural parameters, bulk modulus, thermal expansion coefficient, specific heats and Debye temperatures in the whole range from 0 to 20 GPa and temperature range from 0 to 1500 K.     

Prediction study of structural and elastic properties under pressure effect of M2SnC (M=Ti, Zr, Nb, Hf)

Using first-principles calculations, we have studied the structural and elastic properties of M₂SnC, with M=Ti, Zr, Nb and Hf. Geometrical optimization of the unit cell is in good agreement with the available experimental data. The effect of high pressures, up to 20 GPa, on the lattice constants shows that the contractions along the a-axis were higher than those along the c-axis. We have observed a quadratic dependence of the lattice parameters versus the applied pressure. The elastic constants and their pressure dependence are calculated using the static finite strain technique. A linear dependence of the elastic stiffnesses on the pressure is found. We derived the bulk and shear moduli, Young's moduli and Poisson's ratio for ideal polycrystalline M₂SnC aggregates. We estimated the Debye temperature of M₂SnC from the average sound velocity. This is the first quantitative theoretical prediction of the elastic properties of Ti₂SnC, Zr₂SnC, Nb₂SnC, and Hf₂SnC compounds.     

Structural,elastic and thermodynamic properties under pressure and temperature effects of MgIn2S4 and CdIn2S4

A density functional-based method is used to investigate the structural, elastic and thermodynamic properties of the cubic spinel semiconductors MgIn₂S₄ and CdIn₂S₄ at different pressures and temperatures. Computed ground structural parameters are in good agreement with the available experimental data. Single-crystal elastic parameters are calculated for pressure up to 10 GPa and temperature up to 1200 K. The obtained elastic constants values satisfy the requirement of mechanical stability, indicating that MgIn₂S₄ and CdIn₂S₄ compounds could be stable in the investigated pressure range. Isotropic elastic parameters for ideal polycrystalline MgIn₂S₄ and CdIn₂S₄ aggregates are computed in the framework of the Voigt–Reuss–Hill approximation. Pressure and thermal effects on some macroscopic properties such as lattice constant, volume expansion coefficient and heat capacities are predicted using the quasi-harmonic Debye model in which the lattice vibrations are taken into account.     

The elastic behavior of dense C3N4 under high pressure: First-principles calculations

We have carried a detailed theoretical study on the geometry, density of states, elastic properties, sound velocities and Debye temperature of α-, β-, c- and p-C₃N₄ compounds under a maximum of pressure up to 100 GPa by using first principles calculations. The optimized lattice constants under zero pressure and zero temperature agreed well with the previous experimental and theoretical results. The band gaps of the four types of dense C₃N₄ were widened gradually with the increase of pressure. The calculated Poisson’s ratio γ and B/G values suggest α-, c- and p-C₃N₄ are brittle materials under 0–100 GPa, whereas β-C₃N₄ will become a ductile material as external pressure reaches 57 GPa. We found that the Debye temperature of the four dense C₃N₄ gradually reduces in the order of c-C₃N₄>p-C₃N₄>α-C₃N₄>β-C₃N₄ at 0 GPa and 0 K. However, the Debye temperature of c-C₃N₄ was lower than p-C₃N₄ when external pressure exceeds 6.3 GPa. It may hint that the results could be served as a valuable prediction for further experiments.     

The structural, elastic and thermodynamic properties of thorium tetraboride

The structural, elastic and thermodynamic properties of thorium tetraboride (ThB₄) have been investigated by using first-principles plane-wave pseudopotential density functional theory with generalized gradient approximation. The behaviors of structural parameters under 0-70 GPa hydrostatic pressure are studied by means of Broyden, Fletcher, Goldfarb, and Shanno (BFGS) geometry optimization scheme. By using the stress-strain method, single crystal elastic constants are calculated to test the mechanical stability of the crystal structure and to determine mechanical properties such as bulk modulus at each pressure. However, in order to study the thermodynamic properties of ThB₄, the quasi-harmonic Debye model is used. Then, the dependencies of bulk modulus, heat capacities, thermal expansions, Grüneisen parameters and Debye temperatures on the temperature and pressure are obtained in the whole pressure range 0-70 GPa and temperature range 0-1500 K.     

Structural, high pressure and elastic properties of transition metal monocarbides: A FP-LAPW study

The structural, elastic and thermal properties of four transition metal monocarbides ScC, YC (group III), VC and NbC (group V) have been investigated using full potential linearized augmented plane wave (FP-LAPW) method within generalized gradient approximation (GGA) both at ambient and high pressure. We predict a B₁ to B₂ structural phase transition at 127.8 and 80.4 GPa for ScC and YC along with the volume collapse percentage of 7.6 and 8.4%, respectively. No phase transition is observed in case of VC and NbC up to pressure 400 and 360 GPa, respectively. The ground state properties such as equilibrium lattice constant (a₀), bulk modulus (B) and its pressure derivative (B′) are determined and compared with available data. We have computed the elastic moduli and Debye temperature and report their variation as a function of pressure.     

Elasticity, electronic structure, chemical bonding and optical properties of monoclinic ZrO2 from first-principles

Structural parameters as well as elastic, electronic, bonding and optical properties of monoclinic ZrO₂ were investigated using the plane-wave ultrasoft pseudopotential technique based on the first-principles density-functional theory (DFT). The calculated structural properties and independent elastic constants of monoclinic ZrO₂ are in favorable agreement with previous work. We have derived the bulk and shear moduli, Young’s modulus and Poisson coefficients for monoclinic ZrO₂ and estimated the Debye temperature of monoclinic ZrO₂ from acoustic velocity. Electronic and bonding properties are studied from the calculation of band structure, densities of states and charge densities. Furthermore, in order to clarify the mechanism of optical transitions in monoclinic ZrO₂, the dielectric functions are calculated and analyzed by means of the electronic structure, which shows significant optical anisotropy in the components of polarization directions (1 0 0), (0 1 0) and (0 0 1).     

Elasticity and thermodynamic properties of RuB2 under pressure

First-principles calculations of the crystal structure and the elastic properties of RuB₂ have been carried out with the plane-wave pseudopotential density functional theory method. The calculated values are in very good agreement with experimental data as well as with some of the existing model calculations. The elastic constants c_ij, the aggregate elastic moduli (B, G, E), Poisson's ratio, and the elastic anisotropy with pressure have been investigated. Through the quasi-harmonic Debye model considering the phonon effects, the isothermal bulk modulus, the thermal expansions, Grüneisen parameters, and Debye temperatures depending on the temperature and pressure are obtained in the whole pressure range from 0 to 60 GPa and temperature range from 0 to 1100 K as well as compared to available data.     

Structural,elastic, electronic,optical and thermal properties of c-SiGe<Subscript>2</Subscript>N<Subscript>4</Subscript>

We have investigated the structural, elastic, electronic, optical and thermal properties of c-SiGe₂N₄ by using the ultrasoft pseudopotential density functional method within the generalized gradient approximation. The calculated structural parameters, including the lattice constant, the internal free parameter, the bulk modulus and its pressure derivative are in agreement with the available data. The independent elastic constants and their pressure dependence, calculated using the static finite strain technique, satisfy the requirement of mechanical stability, indicating that c-SiGe₂N₄ compound could be stable. We derive the shear modulus, Young’s modulus, Poisson’s ratio and Lamé’s coefficients for ideal polycrystalline c-SiGe₂N₄ aggregate in the framework of the Voigt-Reuss-Hill approximation. We estimate the Debye temperature of this compound from the average sound velocity. Band structure, density of states, Mulliken charge populations and pressure coefficients of energy band gaps are investigated. Furthermore, in order to understand the optical properties of c-SiGe₂N₄, the dielectric function, refractive index, extinction coefficient, optical reflectivity and electron energy loss are calculated for radiation up to 40 eV. Thermal effects on some macroscopic properties of c-SiGe₂N₄ are predicted using the quasi-harmonic Debye model in which the lattice vibrations are taken into account. We have obtained successfully the variations of the primitive cell volume, volume expansion coefficient, heat capacities and Debye temperature with pressure and temperature in the ranges of 0–40 GPa and 0–2000 K. For the first time, the numerical estimates of the elastic constants and related parameters, and the thermal properties are performed for c-SiGe₂N₄.     

Periodic DFT calculation of the pressure-induced phase transition and thermodynamical properties of magnesium silicide polymorphs

The plane-wave pseudo-potential method within the framework of first-principles is used to investigate the structural and elastic properties of Mg₂Si in its low pressure phase (Fm-3m) and intermediate pressure phase (Pnma). The high-pressure lattice constants, the elastic constants, the elastic moduli and the anisotropy factors of the anti-cotunnite Mg₂Si are presented and discussed. The results show that our system is mechanically stable. The reversible phase transition from anti-fluorite to anti-cotunnite structure is successfully reproduced through the quasi-harmonic Debye model. The phase boundary can be described as P=4.06826−6.95×10⁻³T+5.08838×10⁻⁵T²−4.24073×10⁻⁸T³. To complete the fundamental characteristics of these compounds we have analysed the thermodynamic properties such as thermal expansion, bulk modulus, isochoric heat capacity and Debye temperature in a pressure range 0-21 GPa and a temperature range 0-1200 K. The obtained results tend to support the experimental data when available. Therefore, the present results indicate that the combination of first-principles and quasi-harmonic approximations is an efficient scheme to simulate the high-temperature behaviours of semiconductors like Mg₂Si.     

The structural, elastic and electronic properties of BiI3: First-principles calculations

The structural, elastic and electronic properties of BiI₃ are investigated using the first-principles pseudopotential calculations within the framework of density functional theory. The calculated equilibrium structural parameters agree well with the experimental values. The results show that rhombohedral R-3 structure is low enthalpy structure at zero pressure. R-3 structure will transform into SbI₃-type structure (space group P2₁/c) at about 7.0 GPa. At zero pressure, BiI₃ with R-3 symmetry meets the mechanical stability criteria, but BiI₃ with P-31 m symmetry is an unstable one mechanically. For R-3 structure, the obtained bulk, shear, and Young’s moduli are 25.6, 15.3 and 38.3 GPa, respectively. BiI₃ presents large elastic anisotropy. Debye temperature of R-3 structure calculated is 181 K. The metallization pressure of R-3 structure is about 133 GPa and that of predicted high pressure phase P2₁/c structure is about 61 GPa, indicating BiI₃’s potential application as a nuclear radiation detector under high pressure environment.     

Elastic properties of mono- and polycrystalline ( and Lu) under pressure effect

The structural and elastic properties of perovskite-type RCRh₃, with R=Sc, Y, La and Lu, under pressure effects have been investigated using the pseudo-potential plane-wave method based on the density functional theory within the generalized gradient approximation. For monocrystalline RCRh₃, the optimized lattice constants, elastic constants and directional elastic wave velocities are calculated and analyzed in comparison with the available experimental and theoretical data. An increase in the lattice constant has been found with increasing atomic size of the R element and a corresponding decrease in the hardness. The anisotropic elastic constants and directional elastic wave velocities increase linearly with increasing pressure. A set of elastic parameters and related properties, namely bulk and shear moduli, Young’s modulus, Poisson’s ratio, Lamé’s coefficients, average sound velocity and Debye temperature are predicted in the framework of the Voigt–Reuss–Hill approximation for polycrystalline RCRh₃. We have found that the toughness of RCRh₃ compounds can be improved at high pressure.