基于综合光学调制技术的光纤无线双向通信系统设计

提出并研究了一种使用单光源的光纤无线双向传输系统.该系统只需在中心站配置一个可调谐激光器,以产生频率恒定的激光光源,通过综合光学调制（频率调制、强度调制）技术将基带信号调制到光载波上,最终形成60 GHz毫米波下行信号|同时,相同的光载波在基站被重用,作为上行链路传输光源.系统结合光载波重用技术和综合调制技术特点,合理利用资源,基站结构更为简化.仿真结果表明,该系统可以将速率达2.5 Gbit/s的数据在单模光纤中双向传输20 km,功率代价小于0.5 dB,相对已有的技术方案,该传输系统在传输功率、传输距离、传输性能方面具有明显优势.     

A novel full-duplex radio-over-fiber system based on dual octupling-frequency for 82 GHz W-band radio frequency and wavelength reuse for uplink connection

A novel full-duplex radio-over-fiber system is proposed and demonstrated, in which an external modulator and an optical interleaver are used to generate dual octupling-frequency optical millimeter waves for two base stations and wavelength reuse for uplink connection. This scheme is simplified and low-cost because no additional laser is utilized for uplink connection at two base stations and one laser at central office works for two base stations simultaneously. The frequency of local oscillator signal is reduced largely due to frequency octupling. The theorem about how to generate optical millimeter waves is analyzed. The simulation results show that the bidirectional 5 Gb/s system has a perfect performance because the power penalty for the downlink and uplink signals of two base stations are less than 0.6 dB after successful transmission over 60 km standard single mode fiber.     

Generation of optical carrier suppression millimeter-wave signal using one dual-parallel MZM to overcome chromatic dispersion

In this paper, we have proposed a novel approach to generate optical carrier suppression (OCS) mm-wave with signal only carried by one first-order sideband using a dual-parallel MZM in radio-over-fiber (RoF) system, and the transmission performance was also investigated. As the optical mm-wave signal is transmitted along the fiber, there is no time shift of the data symbols resulting from the group velocity dispersion in the fiber because the signal is only modulated on one sideband. The simulation results showed that the eye diagram keeps open and clear even when the optical mm-wave signals are transmitted over 96-km and the power penalty is about 1-dB after fiber transmission distance of 60-km, which is quite consistent with our theoretical analysis. Furthermore, the proposed OCS optical mm-wave generation approach is also used in a full-duplex RoF link based on wavelength reuse at the base station for the uplink due to another pure sideband without carrying data. The bidirectional 2.5-Gbit/s data is successfully transmitted over 40-km standard single mode fiber with less than 0.5-dB power penalty in the simulation. Both the unidirectional RoF downlink and the full-duplex RoF system have good performance.     

A novel full duplex 16 Gbps SCM/ASK radio over fiber WDM-PON sharing wavelength for up- and down-link using bidirectional reflective filter

In this paper, a new bidirectional wavelength division multiplexing radio-over-fiber (WDM-RoF) using Subcarrier Multiplexing/Amplitude Shift Keying (SCM/ASK) is proposed which shares the same wavelengths for both up-link and down-link. A bidirectional reflective filter (BRF) is utilized in the upstream link to provide a reliable bidirectional optical channel. WDM is used to further increase the capacity of system. Simulation of the proposed scheme demonstrates 1 Gbps down- and up-link data stream for 16 channels over the length of 25 km with acceptable Q-factor (>6 dB).     

A full-duplex radio-over-fiber system using direct modulation laser to generate optical millimeter-wave and wavelength reuse for uplink connection

In this paper, we present a full-duplex radio-over-fiber system incorporating both optical millimeter-wave (mm-wave) generation and wavelength reuse for uplink connection. The optical double sidebands (DSB) signal is generated by using only one inexpensive broadband direct modulation laser (DML), to which a mixing RF signal is applied. An optical interleaver is then used to separate the first-order optical sidebands from the optical carrier of optical DSB signal. The separated first-order optical sidebands are beat to generate mm-wave signal that has double the frequency of the RF drive signal, while the separated optical carrier is reused as light source to remodulate uplink signal. Both detailed theoretical analysis and experiments to demonstrate the feasibility of the proposed system are presented. Experiment result shows that the bidirectional 2.5 Gb/s data can be successfully transmitted over 40 km standard single-mode fiber (SSMF) with less than 2 dB power penalty.     

Novel 60 GHz RoF system with optical single sideband mm-wave signal generation and wavelength reuse for uplink connection

In order to improve RF frequency to achieve higher bandwidth and larger capacity, we propose a novel scheme to generate optical single sideband (SSB) millimeter-wave, in which frequency doubling of local radio frequency (RF) is obtained by using one integrated Mach–Zehnder modulator (MZM), and we theoretically investigate the generating principle of SSB. The optical SSB modulation scheme is employed to generate 60 GHz optical mm-wave and the 2.5 Gb/s baseband signal is simultaneously up-converted at the central station (CS) for downlink transmission, and the optical carrier is reused for uplink connection at the base station (BS). The full-duplex 2.5 Gb/s data are successfully transmitted over 40 km standard single-mode fiber (SMF-28) for both uplink connection and downlink connection with less than 2-dB power penalty. Results show the novel 60 GHz RoF system with optical SSB mm-wave signal generation using optical frequency doubling is feasible and we can obtain simple cost-efficient configuration and good performance over long-distance transmission.     

Power penalty in multitone radio-over-fibre system employing direct and external modulation with optical amplifiers

This paper presents a multitone RoF system employing a central station and a remote antenna station to transmit modulated microwave or mm-wave signals. Two configurations of the system employing direct and external modulation are presented. First, at the central station, the modulating signal is directly and externally modulated at 1549.5 and 1550.5 nm, respectively, and the combined signal is then transmitted using wireless mode. In the second configuration, the combined signal is transmitted over 20 km to the remote antenna station using optical fibre connectivity. At the remote antenna station, both channel wavelengths are separated and amplified with an EDFA and SOA and are detected. The demonstration results show that there exists a small power penalty between the direct and the external modulation. But a large power penalty is reported depending upon the choice of optical amplifier viz. EDFA or SOA. Better performance is recorded in later case. The results also show that power is being distributed among the operating frequency and sidebands adjacent to it after transmission over a fibre link.     

Add/drop applications in fiber ring networks based on a reconfigurable optical add/drop multiplexer in a re-circulating loop

A periodic add/drop system in a fiber ring network was investigated using a reconfigurable optical add/drop multiplexer (ROADM) in a re-circulating fiber loop. After seven cascaded add/drop nodes at every 150 km along the transmission, at bit error ratio (BER) equals to 10⁻⁹ and data rate of 10 Gbps, we observed a 2.5 dB power penalty for the passing through channels with 1050 km transmission distance, and 0.3 dB sensitivity penalty variation for the periodic add/drop channels at every 150 km, respectively.     

Performance enhanced down-stream signalling for next generation long-reach 10 Gbit/s passive optical networks

In this paper, we have analyzed the signal processing methods both in digital and optical domain to enhance the transmission performance of downstream signalling in long reach passive optical networks (LR-PONs). The impact of non-linear (NL) equalization through signal processing, i.e. Volterra Equalization (VE), Digital Backpropagation (BP) and Optical Phase Conjugation with Non-linearity Module (OPC-NM) is investigated, in 10 Gbit/s (XG) DP-QPSK long-reach wavelength division multiplexed (WDM) PONs without midspan repeaters over 120 km standard single mode fibre (SMF) link for down-stream signals. Due to the compensation of optical Kerr effects, the sensitivity penalty is reduced to 2 dB by BP algorithm, 1.5 dB by VE algorithm and 2.69 dB by OPC-NM. Moreover, with the implementation of NL equalization technique we are able to get the transmission distance of 126.6 km SMF for the 1:1024 split-ratio at 5 GHz channel spacing in the non-linear region. Furthermore, the concept of super passive optical network (S-PON) is also evaluated, which involves a repeater stage consisting of optical amplifiers, to study the feasibility for receiver side signal processing and simplification.     

10 Gb/s TDM passive optical networks using four wavelengths multiplexed channels

We propose a new architecture for 10 Gb/s upstream traffic in TDM-PON using externally injection-locked Fabry-Perot laser diodes (FP-LDs) in each optical network unit (ONU). Four directly modulated 2.5 Gb/s FP-LDs were injection-locked by continuous wave (CW) carriers distributed from the optical line terminal (OLT). Hence, a total of 10 Gb/s upstream traffic can be achieved. Experimental results show negligible power penalty at a transmission of 25 km standard single mode fiber (SMF) without dispersion compensation. The performance of the injection-locked FP-LD is also studied.     

Using Fabry-Perot laser diode and reflective semiconductor optical amplifier for long reach WDM-PON system

In this investigation, we propose and investigate the simple self-injection locked Fabry-Perot laser diodes (FP-LDs) in optical line terminal (OLT); and wavelength-tunable optical network unit (ONU) using reflective optical semiconductor amplifier (RSOA) and FP-LD laser for downstream and upstream traffic in long reach (LR) wavelength division multiplexed-passive optical network (WDM-PON) respectively. The output performance of the proposed two laser sources in terms of power and side-mode suppression ratio (SMSR) has been discussed. Here, for the downstream traffic, the proposed optical transmitter can be directly modulated at 2.5 Gb/s on-off keying (OOK) format with nearly 0.4 dB power penalty at bit error rate (BER) of 10⁻⁹ through 75 km single-mode fiber (SMF) transmission. Moreover, the proposed upstream transmitter can be directly modulated at 1.25 and 2.5 Gb/s with nearly 0.5 and 1.1 dB power penalty, respectively, at the BER of 10⁻⁹.     

A full-duplex radio-over-fiber system based on dual quadrupling-frequency

We proposed and simulatedly demonstrated a novel full-duplex radio-over-fiber system using an external modulator and an optical interleaver to generate dual quadrupling-frequency optical millimeter waves for carrying two base station downstream data and wavelength reuse for uplink connection. The simulation results reveal that the power penalties for the downstream and upstream signals of both base stations are less than 0.8 dB. In this new scheme, the configuration of the both base stations is simplified further because there is no additional laser at two base stations. The frequency of local oscillator signal is reduced due to frequency quadrupling. The cost of the new system is largely reduced.     

基于相位调制器产生六倍频光毫米波的OFDM信号光传输系统研究

提出了两个并行相位调制器产生六倍频光毫米波并传输正交频分复用信号的全双工光纤无线通信系统.将2.5 Gbt/s的正交频分复用信号调制到60 GHz光毫米波上.从理论上分析了毫米波产生的原理,并分别模拟了毫米波信号承载OOK信号和正交频分复用信号在光纤中的传输性能.从而验证系统的可行性.仿真模拟结果表明,在光纤无线通信系统中,正交频分复用比非归零码更具有优势.     

Simulation of DWDM signals using optimum span scheme with cascaded optimized semiconductor optical amplifiers

We numerically simulated the ten channels at 10 Gb/s dense wavelength division multiplexing (DWDM) transmission faithfully over 17,227 km using 70 km span of single mode fiber (SMF) and dispersion compensating fiber (DCF) using optimum span scheme at channel spacing 20 GHz. For this purpose, inline optimized semiconductor optical amplifiers (SOAs) and DPSK format are used. We optimized the SOA parameters for inline amplifier with minimum crosstalk and amplified spontaneous emission noise with sufficient gain at bias current 400 mA. For this bias current, constant gain 36.5 dB is obtained up to saturation power 21.35 mW. We have also optimized the optical phase modulator bandwidth for 400 mA current which is around 5.5 GHz with crosstalk −14.2 dB between two channels at spacing 20 GHz.We show the 10×10 Gb/s transmission over 70 km distance with inline amplifier has good signal power received as compared to without amplifier, even at equal quality factor. We further investigated the optimum span scheme for 5670 km transmission distance for 10×10 Gb/s with channel spacing 20 at 5.5 GHz optical phase modulator bandwidth. As we increase the transmission distance up to 17,227 km, there is increase in power penalty with reasonable quality.The impact of optical power received and Q factor at 5670 and 17,227 km transmission distance for different span schemes for all channels has been illustrated. For launched optical power less than saturation, all channels are obtained at bit error rate floor of 10⁻¹⁰.     

一种改进的双边带调制产生光毫米波的方案

提出了应用于光纤无线通信系统中一种改进的双边带调制产生光毫米波方案。在中心站采用强度调制将射频信号调制到光载波上产生一个双边带信号,滤掉中心载波后,利用光交叉复用器把双边带信号的上下边带模分开,将数据速率为2.5Gbit/s的基带信号调制到下边带模后,再与未调信号耦合后产生光毫米波,然后通过单模光纤传输至基站,在基站经过光电转换后产生电毫米波信号。从理论上对该毫米波的色散特性进行了分析,发现毫米波的接收功率不会周期的衰减。同时通过实验研究表明,下行链路信号通过光纤能传输50km而不需要色散补偿,功率代价小于1dBm。因此,该方法产生的光毫米波能有效克服光纤色散引起的信号时延而导致的基带信号退化,适合于远距离传输。     

Characteristics of low noise hybrid fiber amplifier

The characteristics of hybrid fiber amplifier (HFA) are investigated. HFA is composed of three stages: short-length EDFA pre-stage, DCF Raman amplifier, and power boosting EDFA. HFA has low noise figure, high output power, and also wide input power dynamic range. Gain control method of HFA is presented experimentally, and the transient gain excursion is suppressed to less than 0.5 dB at 3 dB channel add-drop. HFA can be used as line amplifier in optical transmission link even combined with distributed Raman amplifier due to wide input power dynamic range. The transmission performance of HFA is better than EDFA by more than 1.0 dB of Q-factor in 720 km SMF transmission.     

Photonic generation of 60 GHz-band vector signals for RoF systems based on optical vector signal down-conversion

A novel photonic method of 60 GHz-band vector signal generation for RoF systems based on optical vector signal down-conversion is proposed and experimentally demonstrated in this paper. In the proposed method, the target vector signals are first generated in the optical domain with the help of mature commercial optical devices and then directly distributed to the base stations (BSs) through the fiber link. The generated vector signals can be automatically down-converted to the 60 GHz band in the BSs after O/E conversion, and then directly transmitted to the users without any further processing. With the proposed method, higher spectrum efficiency and system capacity will be obtained compared with the traditional OOK RoF systems while almost no extra system complexity and cost is brought in. According to the characteristics of different types of vector signals, two particular modulation schemes are provided, which are then verified by corresponding simulations and experiments. In the experimental 60 GHz RoF system, the 622 MSym/s 60 GHz-band 8-QAM and 4-QAM signals generated with two different schemes respectively are successfully transmitted over 50 km SMF and 5 m wireless channel without any compensation, and the power penalty are both about 1.7 dB at the BER of 10^− 9.     

A full-duplex radio-over-fiber link with 12-tupling mm-wave generation and wavelength reuse for upstream signal

A full-duplex radio-over-fiber (RoF) link with a novel scheme to generate 60 GHz mm-waves from a 5 GHz RF signal source is investigated. In the RoF downlink, the required frequency of the RF oscillator is reduced greatly. Since the optical carrier is not modulated by downstream data, part of it is reused to carry upstream data and the upstream data is transmitted to the central station using optical single-sideband modulation. In this way, a single wavelength is used for both downstream and upstream transmissions. Based on this scheme, a full-duplex RoF link is built and its transmission performance is analyzed. Theoretical analysis and numerical simulation show that the downstream signal cannot only eliminate code form distortion caused by time shift of the code edges, but also reduce the influence of the fading effect as the 60 GHz DSB optical mm-wave signal is transmitted along the fiber, and the upstream signal is immune to both fading effect and time shift of the code edges.     

On the carrier generation and HD signal transmission using the millimeter-wave radio over fiber system

The dual sideband optical carrier suppression (DSB-OCS) technique is employed in the optical carrier generation for 40 GHz radio over fiber (ROF) system. A dual electrode Mach-Zehnder modulator (DE-MZM) with the minimum transmission bias (MiTB) technique is employed to build the system. The results show that, a 40 GHz carrier is successfully generated with the amplitude up to −29 dBm and signal to noise ratio (SNR) of 35 dB and a high definition (HD) signal is successfully transmitted using the system. Finally, the bit error rate (BER) measurement is carried out for the system with 1.25 Gbps OOK signal showing an error free 40 GHz ROF system with almost no penalty between the back to back and 20 km fiber for a BER of 10⁻⁹.     

Analysis modulation formats of DQPSK in WDM-PON system

In the modulation and demodulation methods of the optical differential quadrature phase shift key (DQPSK) and the different modulation formats including nonreturn-to-zero (NRZ), return-to-zero (RZ), carrier-suppressed return-to-zero (CS-RZ) are introduced, studying the different optical signals in the 40 Gb/s high speed transmission system. The system is simulated in 200 km optical fiber by way of dispersion compensation. It is showed that the ability of anti-dispersion and anti-PMD (polarization mode dispersion) is better in the CS-RZ-DQPSK modulation format, and this format has the smallest eye-opening penalty (EOP) with a wider range of power into the optical fiber.