Magnetic and magnetoresistive properties of Al<Subscript>2</Subscript>O<Subscript>3</Subscript>–Sr<Subscript>2</Subscript>FeMoO<Subscript>6–δ</Subscript>–Al<Subscript>2</Subscript>O<Subscript>3</Subscript> nanoheterostructures

A method has been developed for fabricating nanoporous matrices based on anodic aluminum oxide for the deposition of ferromagnetic nanoparticles in them. The modes of deposition of strontium ferromolybdate thin films prepared by the ion-plasma method have been worked out, and the magnetic and magnetoresistive properties, structure, and composition of the films have been investigated. It has been revealed that the microstructure and properties of the strontium ferromolybdate films deposited by ionplasma sputtering depend on the deposition rate and the temperature of the substrate. Based on the measurement of the electrical resistivity of nanoheterostructures in a magnetic field, it has been found that the magnetoresistance reaches 14% at T = 15 K and B = 8 T, which is due to the manifestation of tunneling magnetoresistance.     

Microwave characterization of Pb<Subscript>1−x</Subscript>Ca<Subscript>x</Subscript>Fe<Subscript>0.5</Subscript>Nb<Subscript>0.5</Subscript>O<Subscript>3</Subscript> multiferroics at X-band

The microwave characteristics of Pb_1?x Ca _x Fe_0.5Nb_0.5O₃ multiferroics (x = 0.0, 0.4, 0.45, 0.5, 0.55, 0.6), have been investigated as a function of frequency and substitution. The results depict ?13.99 dB reflection loss at 11.65 GHz in composition x = 0.6. Microwave absorption is enhanced with substitution of Ca²⁺ ions and undoped composition 0.0 behaves as electromagnetic shield. The model governing microwave absorption is discussed and different compositions for electromagnetic applications have been suggested.     

Internal friction and magnetoelectric response in two-layer composites Tb<Subscript>0.12</Subscript>Dy<Subscript>0.2</Subscript>Fe<Subscript>0.68</Subscript>–PbZr<Subscript>0.53</Subscript>Ti<Subscript>0.47</Subscript>O<Subscript>3</Subscript>

The inverse magnetoelectric effect and internal friction in two-layer composites based on ferromagnetic Tb_0.12Dy_0.2Fe_0.68 and piezoelectric PbZr_0.53Ti_0.47O₃ are studied in an ac electrical field in the frequency range of 52–213 kHz at temperatures of 293 to 400 K. A correlation is found between the internal friction and the efficiency of the inverse magnetoelectric transformation at resonant frequencies.     

μSR study of Eu<Subscript>0.8</Subscript>Ce<Subscript>0.2</Subscript>Mn<Subscript>2</Subscript>O<Subscript>5</Subscript> and EuMn<Subscript>2</Subscript>O<Subscript>5</Subscript> multiferroics

A comparative μSR study of ceramic samples of the EuMn₂O₅ and Eu_0.8Ce_0.2Mn₂O₅ multiferroics is performed in the temperature range from 15 to 300 K. It is found that the Ce doping of the EuMn₂O₅ sample slightly reduces the temperature of the magnetic phase transition from T _N = 45 K for the EuMn₂O₅ sample to T _N = 42.5 K for the Eu_0.8Ce_0.2Mn₂O₅ sample. Below the temperature T _N for both samples, there are two types of localization of a thermalized muon with different temperature dependences of the precession frequency of the magnetic moment of the muon in an internal magnetic field. The higher frequency in both samples refers to the initial antiferromagnetic matrix. The behavior of this frequency in Eu_0.8Ce_0.2Mn₂O₅ follows the Curie–Weiss law with the exponent β = 0.29 ± 0.02, which differs from the value β = 0.39 standard for 3D Heisenberg magnetics and is observed in EuMn₂O₅, because of the strong frustration of the doped sample. The temperature-independent low frequency is due to the presence of Mn³⁺–Mn⁴⁺ ferromagnetic pairs located along the b axis of the antiferromagnetic matrix and in the regions of phase separation, which contain such ion pairs and e _g electrons recharging them. In both samples, polarization losses are the same (about 20%) and are associated with the formation of Mn⁴⁺–Mn⁴⁺ + Mu complexes near Mn³⁺–Mn⁴⁺ ferromagnetic pairs. In the temperature interval from 25 to 45 K, the separation of the Eu_0.8Ce_0.2Mn₂O₅ structure into two fractions where the relaxation rates of polarization of muons differ by an order of magnitude is revealed. This effect is due to a change in the state of regions of phase separation (1D superlattices) at the indicated temperatures. Such effect in EuMn₂O₅ is significantly weaker.     

High-Temperature Heat Capacity of Zn<Subscript>2</Subscript>V<Subscript>2</Subscript>O<Subscript>7</Subscript>–Cu<Subscript>2</Subscript>V<Subscript>2</Subscript>O<Subscript>7</Subscript> Solid Solutions

Differential scanning calorimetry has been used to study the influence of temperature on the heat capacity of synthesized vanadates Zn₂V₂O₇, (Cu_0.56Zn_1.44)V₂O₇, and (Cu_1.0Zn_1.0)V₂O₇. It is found that dependences C_p = f(T) have extremes. The thermodynamic properties of Zn₂V₂O₇ have been determined.     

Cluster spin glass and superparamagnetism in RuSr<Subscript>2</Subscript>Eu<Subscript>1.5</Subscript>Ce<Subscript>0.5</Subscript>Cu<Subscript>2</Subscript>O<Subscript>10-</Subscript><Subscript>δ</Subscript>

We investigate in detail the dc magnetization and nonlinear ac susceptibility behavior of the superconducting ferromagnet RuSr₂Eu_1.5Ce_0.5Cu₂O_{10- δ} (Ru1222) to develop a comprehensive understanding of the spin glass and superparamagnetism in this material. The structural properties of the system result in the formation of magnetic (ferromagnetic) clusters of different sizes, shapes and properties. The magnetic clustering of the system leads to observation of various features in dc magnetization and ac susceptibility consistent with superparamagnetism and cluster spin glass states, which can coexist or stand alone, depending on the temperature range considered. Experimental results of magnetic measurements in combination with their analysis have enabled us to explain and distinguish these phenomena, as well as to propose a temperature dependent scenario of the system behavior.     

Electrical switching in the MoO<Subscript>3</Subscript>–WO<Subscript>3</Subscript>–P<Subscript>2</Subscript>O<Subscript>5</Subscript> and MoO<Subscript>3</Subscript>–P<Subscript>2</Subscript>O<Subscript>5</Subscript> glasses

High field electrical switching on blown films of MoO₃(60%)–P₂O₅(40%), MoO₃(50%)–WO₃(10%)–P₂O₅(40%), and MoO₃(45%)–WO₃(15%)–P₂O₅(40%) having different thicknesses was studied and compared. Switching was observed using two terminal samples. S-type current–voltage characteristic (current-controlled negative resistance—CCNR) with memory was observed in molybdenum–phosphate glasses, but N-type characteristic (voltage-controlled negative resistance—VCNR) with threshold in tungsten–molybdenum–phosphate glasses was observed. The important observation was that with the addition of WO₃ to binary MoO₃–P₂O5 led to a change of I–V characteristic from CCNR with memory to VCNR with threshold. The measurements of density and molar volume showed linear relation between MoO₃ content and density which decreased with the increase of MoO₃ content. The samples’ thickness had no significant effect on threshold voltage. The attained results also indicated that the electrode material had no effect on switching property of devices. The switching behavior of the devices did not show any dependence on the polarity of the applied voltage. In terms of the effect of heat on the switching behavior of molybdenum–phosphate glasses, it was found that threshold voltage decreases with increasing of temperature. Finally, the switching phenomenon was explained by thermal (formation of crystalline filaments) and electronic models.     

Nernst effect of stripe ordering La<Subscript>1.8−x</Subscript>Eu<Subscript>0.2</Subscript>Sr<Subscript>x</Subscript>CuO<Subscript>4</Subscript>

We investigate the transport properties of La_1.8−xEu_0.2Sr_xCuO₄ (x = 0.04, 0.08, 0.125, 0.15, 0.2) with a special focus on the Nernst effect in the normal state. Various anomalous features are present in the data. For x = 0.125 and 0.15 a kink-like anomaly is present in the vicinity of the onset of charge stripe order in the LTT phase, suggestive of enhanced positive quasiparticle Nernst response in the stripe ordered phase. At higher temperature, all doping levels except x = 0.2 exhibit a further kink anomaly in the LTO phase which cannot unambiguously be related to stripe order. Moreover, a direct comparison between the Nernst coefficients of stripe ordering La_1.8−xEu_0.2Sr_xCuO₄ and superconducting La_2−xSr_xCuO₄ at the doping levels x = 0.125 and x = 0.15 reveals only weak differences. Our findings make high demands on any scenario interpreting the Nernst response in hole-doped cuprates.     

Large electrostrictive strain in lead-free Bi<Subscript>0.5</Subscript>Na<Subscript>0.5</Subscript>TiO<Subscript>3</Subscript>–BaTiO<Subscript>3</Subscript>–KNbO<Subscript>3</Subscript> ceramics

In the present work, (1−x)(0.935Bi_0.5Na_0.5TiO₃–0.065BaTiO₃)–xKNbO₃ (BNT–BT–KN, BNT–BT–100xKN) ceramics with x ranging from 0 to 0.1 were prepared by the conventional ceramic fabrication process. A large electrostrictive coefficient of ∼10⁻² m⁴ C⁻² is obtained with the composition x ranging from 0.02 to 0.1, which is close to the well-known electrostrictive material Pb(Mg_1/3Nb_2/3)O₃. Under an electric field of 4 kV/mm, the electrostrictive strain can reach as high as 0.08%. Besides, the electric field induced strain behavior indicates a temperature independent behavior within the temperature range of 20 to 150°C. The large electrostrictive strain is suggested to be ascribed to the formation of non-polar (NP) phase developed by the KNbO₃ substitution, and the high electrostrictive coefficient of BNT–BT–KN ceramics makes them great candidates to be applied in the new solid-state actuators.     

Elastic properties of TeO<Subscript>2</Subscript>–B<Subscript>2</Subscript>O<Subscript>3</Subscript>–Ag<Subscript>2</Subscript>O glasses

A series of glasses [(TeO₂) _x (B₂O₃)_1−x ]_1−y [Ag₂O] _y with x = 70 and y = 10, 15, 20, 25 and 30 mol% were synthesised by rapid quenching. Longitudinal and shear ultrasonic velocity were measured at room temperature and at 5 MHz frequency. Elastic properties, Poisson's ratio, microhardness, softening temperature and Debye temperature have been calculated from the measured density and ultrasonic velocity at room temperature. The experimental results indicate that the elastic constants depend upon the composition of the glasses and the role of the Ag₂O inside the glass network is discussed. Estimated parameters based on Makishima–Mackenzie theory and bond compression model were calculated in order to analyse the experimental elastic moduli. Comparison between the experimental elastic moduli data obtained in the study and the calculated theoretically by the mentioned above models has been discussed.     

Investigation of quasicrystalline Al<Subscript>62.5</Subscript>Cu<Subscript>25</Subscript>Fe<Subscript>12.5</Subscript> and crystalline β-Al<Subscript>50</Subscript>Cu<Subscript>33</Subscript>Fe<Subscript>17</Subscript> alloys by X-ray photoelectron spectroscopy

The electronic spectra of the valence band and core levels of the surface of polygrain alloys with the icosahedral structure and the β-(CsCl)-type solid solution of Al₅₀Cu₃₃Fe₁₇ were investigated by X-ray photoelectron spectroscopy (XPS). The obtained XPS spectra of the Al_62.5Cu₂₅Fe_12.5 alloy, in comparison with those of the crystalline Al₅₀Cu₃₃Fe₁₇ alloy demonstrate narrowing and a decrease in asymmetry of the Fe2p core level and a decrease in the electron state density N(E _F ) near the Fermi level, features expected for the poorly conducting icosahedral phase. The XPS data are compared with the estimates of N(E _F ) based on the low-temperature specific heat measurements.     

Synthesis and characterization of Li<Subscript>3</Subscript>V<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>·LiMn<Subscript>0.33</Subscript>Fe<Subscript>0.67</Subscript>PO<Subscript>4</Subscript>/C cathode materials

A new polyanionic cathode material, Li₃V₂(PO₄)₃·LiMn_0.33Fe_0.67PO₄/C for lithium-ion batteries, was synthesized using a sol-gel method and with N,N-dimethyl formamide as a dispersion agent. The analysis of electron transmission spectroscopy and X-ray diffraction revealed that the composite contained two phases. The material has high crystallinity with a grain size of 20–50 nm. The valence states of Mn, V, and Fe in the composite were analyzed by X-ray photoelectron spectroscopy. The electrochemical kinetics in Li₃V₂(PO₄)₃ is effectively enhanced by the incorporation of LiMnPO₄ and LiFePO₄, via structure modification and reduced Li diffusion length. The Li₃V₂(PO₄)₃·LiMn_0.33Fe_0.67PO₄/C materials displayed high rate capacity and steady cycle performance with discharge capacity remained 148 mAh g^?1 after 50 cycles at the rate of 0.2C. In particular, the composite exhibited excellent reversible capacities, with the values of 157, 134, 120, 102, and 94 mAh g^?1 at charge/discharge 0.2, 0.5, 1, 2, and 5C rates, respectively.     

Current-induced voltage oscillations in superconducting Y<Subscript>1</Subscript>Ba<Subscript>2</Subscript>Cu<Subscript>3</Subscript>O<Subscript>7-δ</Subscript>

We investigated influence of bidirectional square wave current with long periods and dc current on the evolution of the voltage-time (V - t) curves in superconducting polycrystalline bulk Y₁Ba₂Cu₃O_7-δ (YBCO) material at the temperatures near the critical temperature. In a well-defined range of amplitudes and periods of driving current, and temperatures, novel type of non-linear dynamic responses was observed by means of the V-t curves. It was seen that such a non-linear response to bidirectional square wave current sometimes reflects itself as regular sinusoidal-like voltage oscillations. The sinusoidal-like and non-sinusoidal oscillations were discussed mainly in terms of the dynamic competition between pinning and depinning and significant relaxation effects which appear in this competing process. The density fluctuations associated with the current induced self-magnetic flux (SMF) lines and semi-elastic coupling of SMF lines with the pinning centers were also considered as possible physical mechanisms in the interpretation of the experimental results.     

Current dependent reorganization in superconducting Y<Subscript>1</Subscript>Ba<Subscript>2</Subscript>Cu<Subscript>3</Subscript>O<Subscript>7-δ</Subscript>

We present strong non-linear dynamic responses developing due to magnitude and type of driving current in bulk polycrystalline superconducting Y₁Ba₂Cu₃O_7-δ sample at zero magnetic field. Several novel types of dynamic changes induced by the transport current were observed via the time evolution of the voltage (V - t curves). The physical observations appearing in V - t curves were interpreted mainly with the reorganization of driving current in a multiply connected network of weak-link structure. It was found that such a dynamic process could cause an enhancement or suppression in superconducting order parameter due to the magnitude of the driving current and coupling strength of weak link structure together with the chemical and anisotropic states of the sample. It was shown that the general behavior of decays evolving in V - t curves is consistent with an exponential relation which is analogous to the glassy state relaxation.     

Preparation,structure and properties of La<Subscript>0.67</Subscript>Pb<Subscript>0.33</Subscript>(Mn<Subscript>1-x</Subscript>Co<Subscript>x</Subscript>)O<Subscript>3-δ</Subscript>

La_0.67Pb_0.33(Mn_1-xCo_x)O_3-δ ceramics with x=0, 0.01, 0.03, 0.06, 0.1 and 0.15 have been prepared in a two-step procedure. Precursor gels were made by the wet chemical malic acid method. The gels were calcined and then converted into ceramics by heat treatment at 950 °C and 1000 °C in air. X-ray diffraction showed that the compounds were phase pure. The crystal structure symmetry of the compounds was confirmed to be rhombohedral (space group R3̄c) for the whole investigated range of x. All compounds undergo a paramagnetic–ferromagnetic phase transition between 335 K and 225 K. The basic magnetic characteristics such as the Curie temperature , the paramagnetic Curie temperature θ, the effective magnetic moment and the saturated magnetization decrease with increasing Co doping. The ferromagnetic transition is accompanied by an anomaly in the electrical resistance for all compounds. The high-temperature insulator–metal transitions () do not coincide with the relevant . A large magnetoresistance peak of about 15% was observed for all compounds at . PACS 72.80.Ga; 75.47.Lx; 75.60.Ej     

Phase formation in the BaCO<Subscript>3</Subscript>–PbO–Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>–Nb<Subscript>2</Subscript>O<Subscript>5</Subscript> system

Features of the formation of lead-ferroniobate compounds in the xBaCO₃–(1 – x)PbO–Fe₂O₃–Nb₂O₅ system by solid-phase synthesis are investigated. For perovskite-type lead-ferroniobate solid solution, a single-phase concentration region is revealed at 1233 K. The crystalline structures of the synthesized compounds are refined using Rietveld analysis and the Pm3?m and R3m space groups. Ceramic samples of lead ferroniobate are studied by scanning electron microscopy.     

A new composite material Li<Subscript>4</Subscript>Ti<Subscript>5</Subscript>O<Subscript>12</Subscript>–SnO<Subscript>2</Subscript> for lithium-ion batteries

A new Li₄Ti₅O₁₂–SnO₂ composite anode material for lithium-ion batteries has been prepared by loading SnO₂ on Li₄Ti₅O₁₂ to obtain composite material with improved electrochemical performance relative to Li₄Ti₅O₁₂ and SnO₂. The composite material was characterized by X-ray diffraction and scanning electron microscopy. The results indicated that SnO₂ particles have encapsulated on the surface of the Li₄Ti₅O₁₂ uniformly and tightly. Electrochemical results indicated that the Li₄Ti₅O₁₂–SnO₂ composite material increases the reversible capacity of Li₄Ti₅O₁₂ and has good cycling reliability. At a current rate of 0.5 mA/cm², the material delivered a discharge capacity of 236 mAh/g after 16 cycles. It suggests the existence of synergistic interaction between Li₄Ti₅O₁₂ and SnO₂ and that the capacity of the composite is not a simple weighted sum of the capacities of the individual components. In the composite material, SnO₂ can act as a bridge between the spinel particles to reduce the interparticle resistance and as a good material for the Li intercalation/deintercalation. Thus, electrochemical performance of the Li₄Ti₅O₁₂ spinel can be improved by the surface modification with SnO₂, and the stability of Li₄Ti₅O₁₂ also serves to buffer the internal stress caused by the volume changes in lithium insertion and extraction reactions.     

Surface of underdoped YBa<Subscript>2</Subscript>Cu<Subscript>3</Subscript>O<Subscript>7-</Subscript><Subscript>δ</Subscript> as revealed by STM/STS

We performed scanning tunneling microscopy and spectroscopy on untwinned crystals of underdoped YBa₂Cu₃O_{7- δ} at δ = 0.4. A comprehensive statistical analysis of our topographic data indicates a doping dependent cleaving behavior of this material. We find in particular that at δ = 0.4 the material primarily cleaves in multiples of one unit cell along the c-axis with a high corrugation of the topmost layer. Our data suggest that the low temperature cleaving mainly results in a disruption of the CuO chain layers involving a redistribution of the layer atoms onto the two cleaving planes. In a few instances, fractional step heights (in terms of the c-axis lattice constant) are observed as well. Scanning tunneling spectroscopy reveals that such fractional steps connect surfaces which differ significantly in their tunneling conductance.     

Influence of Zn/Co ratio on dielectric behavior of Na<Subscript>2</Subscript>Zn<Subscript>1 ‐ x</Subscript>Co<Subscript>x</Subscript>P<Subscript>2</Subscript>O<Subscript>7</Subscript> glasses

A series of zinc phosphate glass doped with cobalt Na₂Zn_(1???x)Co_xP₂O₇ (x = 0, 1, 2 and 5 mol%) was synthesized. These glasses were characterized by both infrared and large broadband dielectric spectroscopy. Infrared spectra indicate the increase of Zn/Co ratio creates defect in phosphate network due to the depolymeration of phosphate anions. The dc conductivity increases and activation energy decreases with the amount of cobalt ions in the glass network. The impedance measurements reveal that the total conductivity follows Jonscher’s power law. The dielectric constant and dielectric loss increased with the temperature and decreased with the frequency whatever the cobalt proportion.