碱金属气体中的玻色-爱因斯坦凝聚——2001年度诺贝尔物理奖介绍

介绍了2001年度诺贝尔物理奖的科学成京，简述了碱金属气体中的破色-爱因斯坦凝聚研究历史，评述了它对物理科学和技术科学的影响。     

非富勒烯聚合物薄膜的超快可见激发-红外探测光谱研究

非富勒烯聚合物太阳能电池材料是最具前景的有机太阳能电池材料之一。供受体材料的化学结构直接决定两者之间能带匹配程度,从而影响光电转换效率。本文以非富勒烯给受体材料为研究对象,利用超快可见激发-中红外探测光谱方法,以ITIC分子中的CN和CO伸缩振动为探针,研究了非富勒烯聚合物薄膜在光激发后电荷分离及演化过程。结果表明,这一体系的电荷分离过程可发生在皮秒时间尺度上。     

离子化程度对硼取代富勒烯C19Bn+（n=0-3）体系储氢性能的影响

本文采用密度泛函理论方法，研究了氢气分子在硼取代富勒烯C19Bn+（n=0-3）表面的非解离吸附态、化学吸附态、及吸附态之间转换过渡态的结构和能量，得到了吸附态之间转换反应的势能面. 研究表明通过调整体系的离子化电荷可以调整吸附位点的电荷布居数，随着硼取代富勒烯离子化体系C19Bn+的吸氢活性位点电荷布居数增大，氢分子被极化的程度以及氢分子在材料表面的吸附能均逐渐增大，同时改变电荷布居数也对氢气分子在表面吸附态间转变势垒高度产生了量级为几个Kcal/mol的影响. 希望我们的研究能够对富勒烯储氢的进一步发展提供参考.     

富勒烯在激光科学中的应用

简要评述了富勒烯在激光科学中的研究进展，介绍了富勒烯的非线性光学特性及其潜在应用，展示了富勒烯衍生物和掺富勒烯新型光学材料的研究与应用发展前景。     

富勒烯有机-无机杂化材料的非共珍三阶非线性光学特性

采用中心波长800 nm、脉宽30 fs的超短激光脉冲,通过飞秒光开关技术(Optical Kerr Shutter,OKS)对富勒烯有机-无机杂化材料的飞秒超快非线性特性进行了实验研究.获得270 fs的开关时间,所得的富勒烯有机-无机杂化材料的三阶非线性系数X~(3)约为4.5×10~(-4) esu,比C_(60)分子的三阶非线性系数X~(3)高一个数量级.通过实验测定的光克尔信号强度与激发光和探测光偏振方向夹角的依赖关系表明:30 fs的超短激光脉冲激发富勒烯有机-无机杂化材料的克尔信号主要是源于光诱导双折射效应,而非用200 fs的超短激光脉冲时来自瞬态栅的自衍射效应.     

C60富勒烯-巴比妥酸及其二聚体几何结构和电子结构的密度泛函计算研究

采用基于密度泛函理论的广义梯度近似,对C₆₀富勒烯-巴比妥酸及其二聚体的几何结构和电子结构进行了计算研究.发现：C₆₀富勒烯-巴比妥酸只有一种稳定结构,且掺杂巴比妥酸基团对C₆₀分子构型的影响是局域的.C₆₀富勒烯-巴比妥酸的二聚体有三种同素异构体,分别以［6,5］—［6,5］,［6,6］—［6,5］和［6,6］—［6,6］三种方式键合,从能隙大小顺序和总能相对大小来看,［6,6］—［6,6］结构最为稳定.电子结构方面,在C₆₀富勒烯-巴比妥酸单体中,Donor-Acceptor电荷转移体系为C₆₀富勒烯-巴比妥酸,即电荷是从C₆₀向巴比妥酸转移.由前线轨道和自旋布居数得知,C₆₀富勒烯-巴比妥酸单体很好地保留了C₆₀的电磁性质,但稳定性下降,易发生二次加成反应形成二聚体.对于C₆₀富勒烯-巴比妥酸二聚体,Mulliken电荷分析显示,在加成四元环处的碳原子分别得到0104e和0106e电荷,而与它们邻近的碳原子则失去电子,带有正电荷,且距加成位置越近的碳原子失去的电荷越多.在远离加成位置处,碳原子的净电荷变化相对较小.与单体152eV能隙相比,二聚体中的能隙为1.45eV.其前线轨道分布与单体相比,最高占据轨道几乎未变,但最低未占据轨道发生了很大变化. 关键词： 几何结构 电子结构 密度泛函     

富勒烯有机-无机杂化材料的非共珍三阶非线性光学特性

采用中心波长800 nm、脉宽30 fs的超短激光脉冲,通过飞秒光开关技术（Optical Kerr Shutter,OKS）对富勒烯有机-无机杂化材料的飞秒超快非线性特性进行了实验研究.获得270 fs的开关时间,所得的富勒烯有机-无机杂化材料的三阶非线性系数χ(3)约为4.5×10－14 esu,比C60分子的三阶非线性系数χ(3)高一个数量级.通过实验测定的光克尔信号强度与激发光和探测光偏振方向夹角的依赖关系表明：30 fs的超短激光脉冲激发富勒烯有机-无机杂化材料的克尔信号主要是源于光诱导双折射效应,而非用200 fs的超短激光脉冲时来自瞬态栅的自衍射效应.     

富勒烯在激光科学中的使用

简要评述了富勒烯在激光科学中的研究进展，介绍了富勒烯的非线性光学特性及其潜在应有用，展示了富烯衍生物和掺富勒烯新型光学材料的研究与应用发展前景。     

富勒烯-PVP聚合物链团结构的中子小角散射实验研究

应用中子小角散射技术研究了水溶液中富勒烯-PVP聚合物的链团结构及其大小以及它们在不 同富勒烯含量下的变化.结果表明：当加入富勒烯后，不论是PVP单体分子链还是大分子链团 ，其相关长度与纯PVP溶液相比均变小，且大分子链团的变化更为明显；在不同富勒烯含量 情况下，高富勒烯含量的富勒烯-PVP分子链团的体积更小. 关键词： 中子小角散射 富勒烯 PVP聚合物     

稀薄原子气体玻色-爱因斯坦凝聚近期研究进展简介

论述了自1999年涡旋态在稀薄碱金属原子气体的玻色-爱因斯坦凝聚体(BEC)中成功实现以来有关的BEC理论和实验研究的进展及作近期的部分探索，并介绍了相关的基本概念和理论。     

Pyroelectric properties in three phases coexistence Pb[(Mn0.33Nb0.67)0.5(Mn0.33Sb0.67)0.5]0.08(ZrxTi1−x)0.92O3 lead ceramics

The bulk dense Pb[(Mn_0.33Nb_0.67)_0.5(Mn_0.33Sb_0.67)_0.5]_0.08(Zr_xTi_1−x)_0.92O₃ pyroelectric ceramics have been successfully prepared by the conventional solid method. The effect of three phases coexistence in the ceramics is studied. When x = 0.95 and 0.85 in the ceramics, the maximum pyroelectric coefficient peaks appear at 23 °C and 45 °C, and the maximum values are 26.5 × 10⁻⁴ C/m² °C and 25.5 × 10⁻⁴ C/m² °C, respectively. The maximum pyroelectric coefficient appears large while the peaks widths are small. When the two kinds of ceramic powders mixed with the mol ratio of 2:1, the pyroelectric coefficient of the ceramics is above 10.0 × 10⁻⁴ C/m² °C in a broad temperature range from 20 °C to 55 °C. The possible physical mechanism of the temperature broadened phenomenon is briefly discussed.     

Large memory window in the vanadium doped Bi4Ti3O12 thin films

We report the enhancement of ferroelectric properties in vanadium-doped Bi₄Ti₃O₁₂ (BIT) thin films prepared by rf magnetron sputtering method for MFM and MFIS structures. The optimal sputtering parameters of the as-deposited Bi_3.9Ti_2.9V_0.08O₁₂ (BTV) ferroelectric films for different depositing times were obtained. Compared to the undoped BIT, vanadium doped BIT (BTV) showed better physical and electrical characteristics. The as-deposited BTV showed a remanent polarization (2P _r ) of 23 μC/cm², higher than the value of 16 μC/cm² for BIT, as the measured frequency was 100 kHz. For BTV thin films in the MFIS structure, the leakage current density and the memory window decreased, the change ratio of capacitance critically increased as the depositing time increased from 30 to 120 min. Regarding the measured physical properties, the micro-structure and thickness of as-deposited undoped and vanadium doped BIT thin films were obtained and compared by XRD patterns and SEM images.     

Ferroelectric and paramagnetic properties of Li2Gd4 (MoO4)7 single crystals

Thermal behavior of such fundamental physical properties as polarization, pyroelectric current, dielectric constant and paramagnetic susceptibility are reported for dilithium heptamolybdotetragadolinate, Li₂Gd₄ (MoO₄)₇. The ferroelectric transition point has been determined by various methods and the results compared. The most reliable value of the Curie point has been obtained by the measurement of differential magnetic susceptibility as a function of temperature and is found to be 52±2°C. The room temperature values for the relative dielectric constant and paramagnetic susceptibility are 51.5 and 59.8 x 10^-6 cm³. g^-1, respectively. From the susceptibility measurements the values obtained for the Curie constant, C, and the paramagnetic Curie point, θp, are 1.79 x 10^-2 cm³ . g^-1 . deg and 247°K, respectively. It is believed that Li₂Gd₄ (MoO₄)₇ could be antiferromagnetic between 273 and 325°K.     

Mn3O4包覆对LiNi0.5Mn1.5O4正极材料界面电化学性能的提高

本文采用化学湿磨法，首次将金属氧化物Mn₃O₄包覆于LiNi_0.5Mn_1.5O₄颗粒表面，使得电极材料的电子电导率从1.53×10^-7 S/cm 提高到3.15×10^-5 S/cm. 电化学测试结果表明Mn₃O₄包覆大大提高LiNi_0.5Mn_1.5O₄正极材料的倍率性能和高温循环稳定性. 最佳包覆样品为2.6wt% Mn₃O₄包覆的LiNi_0.5Mn_1.5O₄，在10 C倍率下具有108 mAh/g的高放电容并且在55 °C下100次循环后仍有78%的容量保持率，远大于未包覆样品67%的容量保持率.     

Ferroelectric properties of Pr6O11-doped Bi4Ti3O12

Praseodymium doped Bi₄Ti₃O₁₂ (BIT) ceramics with composition Bi_2.9Pr_0.9Ti₃O₁₂ (BPT) were prepared by solid state reaction. These samples have polycrystalline Bi-layered perovskite structure without preferred orientation, and consist of well-developed plate-like grains with random orientation. Pr doping into BIT causes a large shift of the Curie temperature (T_C) of the BIT from 675 to 398 °C. At an electric field of 87 kV/cm, the remanent polarization and the coercive field of the BPT ceramics are 30 μC/cm² and 52 kV/cm, respectively. Furthermore, the dielectric permittivity and the dissipation factor of the BPT ceramics are 300 and 0.003 at 1 MHz, 1 V, and room temperature. Ferroelectric properties of the BPT ceramics are superior to V-doped Bi₄Ti₃O₁₂ (∼20 μC/cm² and 80 kV/cm) and (Sr, Ta)-doped Bi₄Ti₃O₁₂ (∼12 μC/cm² and 71 kV/cm) ceramics. In addition, the dense ceramics of praseodymium-doped B₄Ti₃O₁₂ were obtained by sintering at 1100 °C, about 100-200 °C lower than those of the SrBi₂Ta₂O₉ system.     

Ionic transport in the lithium nitride bromides,Li6NBr3 and Li1 3N4Br

The ionic and electronic conductivities of the lithium nitride bromides Li₆NBr₃ and Li_{1 3}N₄Br have been studied in the temperature range from 50 to 220°C and 120 to 450°C, respectively. Both compounds are practically pure lithium ion conductors with negligible electronic contribution. Li₆NBr₃ has an ionic conductivity Ω of 2 × 10^-6Ω^-1cm^-1 at 100°C and an activation enthalpy for σT of 0.46 eV. Li_{1 3}N₄Br shows a phase transition at about 230°C. The activation enthalpy for σT is 0.73 eV below and 0.47 eV above this temperature. The conductivities at 150 and 300°C were found to be 3.5 × 10^-6 Ω^-1cm^-1 and 1.4 × 10^-3Ω^-1cm^-1, respectively. The crystal structure is hexagonal at room temperature with $\text{a = 7.415 (1)}\text{A}\text{?}$ and $\text{c = 3.865 (1)}\text{A}\text{?}$.     

Scattering and reactions of 14C + 14C and 14C + 14C

We have studied elastic scattering, inelastic scattering and several transfer channels of the systems ¹⁴C + ¹⁴C and ¹⁴C + ¹²C over a wide range of energies up to E_c.m. = 35 eMeV and 32 MeV, respectively. The reaction channels were identified by means of kinematic coincidences between solid-state detectors, γγ coincidences were measured to determine cross sections for mutual inelastic scattering of ¹⁴C + ¹⁴C.Pronounced regular gross structures, similar to those found for ¹⁶O + ¹⁶O, are observed in the elastic excitation function of ¹⁴C + ¹⁴C at θ_c.m. = 90°, The angular distributions measured at the energies of the maxima and an optical-model analysis suggest that one or a few surface partial waves dominate the scattering behaviour. Correlated structure of narrower width is found in the inelastic channels and, to a lesser degree, in the transfer channels which appear with rather small cross sections.In ¹⁴C + ¹²C elastic scattering the gross structures are strongly fragmented, in contrast to ¹⁴C + ¹⁴C but similar to ¹²C + ¹²C. While the ¹²C(2⁺) excitation is very weak, the observed strengths of the ¹⁴C(3^?) excitation and of neutron transfer point to a substantial role of these channels as coupling partners to the elastic configuration and to their influence on the elastic scattering behaviour. A correlated intermediate structure is observed near 23.5 MeV, where a dominance of l = 18 is suggested by the elastic scattering angular distribution. This unexpectedly high l-value exceeds l_graz at this energy by at least two units of ?.     

12C1 and 8Be production in 12C + 208Pb collisions

The mechanisms involved in the production of fast α-particles in ¹²C-induced reactions have been studied for the ¹²C + ²⁰⁸Pb system at the bombarding energies of E_12c = 132, 187 and 230 MeV. Absolute cross sections for the reactions ²⁰⁸Pb(¹²C. ¹²C¹→α + ⁸Be), ²⁰⁸Pb(¹²C, ⁸Be(g.s.)) and ²⁰⁸Pb(¹²C, ⁸Be(2.94 MeV)) have been determined by coincidence measurement of two or three correlated α-particles. Inclusive α-particle production cross sections were also measured at E_12c = 187 MeV. It is found that the inelastic process (¹²C, ¹²C¹→α + ⁸Be) does not contribute significantly to fast α-particle production but that the production of ⁸Be by projectile fragmentation is an important source of α-particles. At the highest bombarding energy (230 MeV) it appears that the ¹²C → 3α fragmentation reaction becomes more prominent at the expense of the ¹²C→α + ⁸Be fragmentation channel.     

Role of the TiO6 octahedra on the ferroelectric and piezoelectric behaviour of the poled PbMg1/3Nb2/3O3-xPbTiO3 (PMN-PT) single crystal and textured ceramic

Field cooling (FC) poled/unpoled PMN-29%PT single crystal and room temperature (RT) poled/unpoled PMN-34.5%PT textured ceramic were investigated between ∼0 and 300 °C by thermal expansion, dielectric and Raman spectroscopy. New phase transitions are evidenced at 40, 91 and 180 °C in the case of FC PMN-29%PT as well as at 70 and 200 °C for RT PMN-34.5%PT and their order is discussed. The physical properties of the textured ceramics are rather similar to the ones observed for the single crystals that make them low-cost alternative for a wide range of applications. However, the temperatures and character of the phase transitions strongly depend on the kind of the poling conditions. Temperature dependences of the Raman line parameters show that the NbO₆ octahedra remain stable during temperature increase, while TiO₆ ones evolve quasi-continuously. The step transitions of the Pb²⁺ ion sublattice are evidenced. This suggests that the TiO₆ and Pb²⁺ sublattices are especially coupled. The role of the TiO₆ clusters on the structural phase transitions and dielectric properties of the PbMg_1/3Nb_2/3O₃-xPbTiO₃ (PMN-PT) system is discussed. The presence of the Raman modes above the maximum dielectric permittivity reveals that the local symmetry is lower than the cubic one (Pm3m). The decrease of the Raman line intensities vs. temperature indicates precisely the continuous evolution of the local symmetry towards the cubic one. The temperature evolution of the Rayleigh wing parameters appears sensitive to the phase transitions’ presence.     

Polymorphism in Bi2Sn2O7

Single crystals of Bi₂Sn₂O₇ were grown in a Bi₂O₃ flux. Phase transitions were identified at about 90 and 680° using X-ray, SHG, DSC, dielectric, and optical data. γ-Bi₂Sn₂O₇, which exists above 680°C is centric and cubic with a = 10.73 Å at 700°, and it probably has the ideal pyrochlore structure. β-Bi₂Sn₂O₇, which exists between 680° and about 90°C, is acentric but remains cubic with a = 21.40 Å. α-Bi₂Sn₂O₇, which exists from about 90°C to below room temperature, is acentric and noncubic, probably tetragonal with a = 21.328 and c = 21.545 Å. The α-β transition is first order, and the β-γ transition appears to be second order. Substitutions of Pb²⁺ or Cd²⁺ for Bi³⁺ and of Ga³⁺, Rh³⁺ Sc³⁺, In³⁺, Sb⁵⁺ Nb⁵⁺ or Ta⁵⁺ for Sn⁴⁺ lower the α-β transition temperature.