UV-induced synthesis,characterization and formation mechanism of silver nanoparticles in alkalic carboxymethylated chitosan solution

The silver nanoparticles (AgNPs) were synthesized in an alkalic aqueous solution of silver nitrate (AgNO₃)/carboxymethylated chitosan (CMCTS) with ultraviolet (UV) light irradiation. CMCTS, a water-soluble and biocompatible chitosan derivative, served simultaneously as a reducing agent for silver cation and a stabilizing agent for AgNPs in this method. UV–vis spectra and transmission electron microscopy (TEM) images analyses showed that the pH of AgNO₃/CMCTS aqueous solutions, the concentrations of AgNO₃ and CMCTS can affect on the size, amount of synthesized AgNPs. Further by polarized optical microscopy it was found that the CMCTS with a high molecular weight leads to a branch-like AgNPs/CMCTS composite morphology. The diameter range of the AgNPs was 2–8 nm and they can be dispersed stably in the alkalic CMCTS solution for more than 6 months. XRD pattern indicated that the AgNPs has cubic crystal structure. The spectra of laser photolysis of AgNO₃/CMCTS aqueous solutions identified the early reduction processes of silver cations (Ag⁺) by hydrated electron formed by photoionization of CMCTS. The rate constant of corresponding reduction reaction was 5.0 × 10⁹ M⁻¹ s⁻¹.     

Mycogenic synthesis of silver nanoparticles by the Japanese environmental isolate <Emphasis Type="Italic">Aspergillus tamarii</Emphasis>

In this study, an environmental friendly process for the synthesis of silver nanoparticles (AgNPs) using a fungus Aspergillus tamarii has been investigated. The process of silver ion reduction by the fungal extracellular filtrate was spontaneous which lead to the development of an easy process for synthesis of silver nanoparticles. The AgNPs formed were characterized using UV–Visible spectrum, FTIR, and SEM. The results revealed that silver ions reduction by the fungal extracellular filtrate started at 420 nm after 0.5 h of incubation time. The FTIR peaks were observed at 1393, 1820, 2727, and 3545 cm⁻¹. The SEM result showed the distribution of spherical AgNPs ranging from 25 to 50 nm.     

Colloidal stability of silver nanoparticles in biologically relevant conditions

Understanding the colloidal stability of nanoparticles (NPs) plays a key role in phenomenological interpretation of toxicological experiments, particularly if single NPs or their aggregates or agglomerates determine the dominant experimental result. This report examines a variety of instrumental techniques for surveying the colloidal stability of aqueous suspensions of silver nanoparticles (AgNPs), including atomic force microscopy, dynamic light scattering, and colorimetry. It was found that colorimetry can adequately determine the concentration of single AgNPs that remained in solution if morphological information about agglomerates is not required. The colloidal stability of AgNPs with various surface capping agents and in various solvents ranging from cell culture media to different electrolytes of several concentrations, and in different pH conditions was determined. It was found that biocompatible bulky capping agents, such as bovine serum albumin or starch, that provided steric colloidal stabilization, as opposed to purely electrostatic stabilization such as with citrate AgNPs, provided better retention of single AgNPs in solution over a variety of conditions for up to 64 h of observation.     

Synthesis of silver nanoparticles by sonogalvanic replacement on aluminium powder in sodium polyacrylate solutions

The process of the formation of silver nanoparticles (AgNPs) via the method of galvanic replacement (GR) of Ag⁺ with aluminum powder in sodium polyacrylate (NaPA) solutions in the ultrasonic (US) field has been studied. It was observed, that the yellow colloidal solutions of stabilized AgNPs with the absorption maximum at ∼ 410 nm were obtained under the application of US power by 20 W and frequency by 20 kHz in the wide range of AgNO₃ and NaPA concentrations (0.1 – 0.5 mM and 0.5 – 5.0 g/L respectively) at 25 ⁰C. It was shown, that the GR process under US field occurs without of the significant induction period. Using the UV–vis spectroscopy the kinetics of AgNPs formation has been studied and it was observed the first order kinetics with respect to Ag⁺ ions both for the nucleation and growth processes. It was found that observable rate constants of nucleation are close for the all experimental conditions but the observable rate constants of growth decreased with increasing of initial concentration of AgNO₃. Based on the obtained kinetic data it was proposed a mechanism of the formation of AgNPs consisted of the following two main stages: 1) the nucleation with the formation of primary nanoclusters (AgNCs) on aluminum surface followed by their ablation from the surface of the sacrificial metal by ultrasound into bulk of solution; 2) the transformation of AgNCs in AgNPs via growth from the Al surface and / or agglomeration of AgNCs. Using TEM it was found that the size of obtained AgNPs does not exceed of 25 nm and slightly depends on the initial concentrations of precursors. High antimicrobial activity of obtained colloidal solutions against gram-negative and gram-positive bacteria as well as against fungi was observed.     

A novel method for synthesis of colloidal silver nanoparticles by arc discharge in liquid

This paper presents a novel, inexpensive and one-step approach for synthesis of silver nanoparticles (Ag NPs) using arc discharge between titanium electrodes in AgNO₃ solution. The resulting nanoparticles were characterized using UV–Vis spectroscopy, scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Silver nanoparticles of 18 nm diameter were formed during reduction of AgNO₃ in plasma discharge zone. Optical absorption spectroscopy of as prepared samples at 15 A arc current in AgNO₃ solution shows a surface plasmon resonance around 410 nm. It was found that sodium citrate acts as a stabilizer and surface capping agent of the colloidal nanoparticles. SEM images exhibit the increase of reduced nanoparticles in 6 min arc duration compared with 1 min arc duration. TEM image of the sample prepared at 6 min arc duration shows narrow size distribution with 18 nm mean particle size. Antibacterial activities of silver nanoparticles were investigated at the presence of Escherichia coli (E-coli) bacteria.     

Colorimetric Sensing of Toxic Metal and Antibacterial Studies by Using Bioextract Synthesized Silver Nanoparticles

Here, we report the simple and cost effective colorimetric technique for the determination of toxic metals (Hg²⁺) in aqueous sample by using bioextract silver nanoparticles (AgNPs). The indigenous AgNPs were synthesised by green and ecologically friendly style using extract of fig (Ficus carica) leaf. The synthesized AgNPs were confirmed by UV–vis spectroscopy, FT-IR spectroscopy, and scanning electron microscopy methods. The synthesis of AgNPs was observed by its colour changing from light yellow to dark brownish. The existence of furanocoumarins bioactive materials in the fig leaf extract, which act as bio-reducing and capping agent, help in the formation of stabilized silver nanoparticles. In addition, the bacterial activity of the synthesized silver nanoparticles was tested against gram-negative (Klebsiella oxytocam, Pseudomonas aeruginosam, Shigella flexneri and Proteus mirabilis), gram-positive (Staphylococcus aureus and Micrococcus luteus) and one Candida (Candida albicans) human pathogen and the results showed moderate activity.     

Biocompatible gold/silver nanostars for surface‐enhanced Raman scattering

Raman‐enhancing properties of chitosan (CS)‐coated gold/silver nanostars (Au/AgNSs) were demonstrated by using them as a surface‐enhanced Raman scattering (SERS) probe. Based on the energy‐dispersive X‐ray spectroscopy element distribution maps and highly enhanced SERS spectra, we suggest that the incorporation of silver into the NS tips leads to a stronger SERS behavior. The SERS spectra of the proteins adsorbed on the NS surface greatly differ from their respective Raman spectra in both the band positions and relative intensities, indicating that the protein molecules penetrate through the CS coating layer and interact closely with the NS surface. Raman and SERS spectra of Chlamydia trachomatis protease/proteasomelike activity factor are reported for the first time, demonstrating the potential of these NSs for the development of a diagnosis method for Chlamydia based on SERS. The results showed a good SERS performance of the Au/AgNSs and their potential for SERS detection of biomolecules. Copyright © 2016 John Wiley & Sons, Ltd.     

Surface‐enhanced Raman spectroscopy for quantitative measurement of lactic acid at physiological concentration in human serum

Lactic acid is a simple and effective indicator for estimating physiological function. Rapid and sensitive detection of lactic acid is very useful in clinical diagnosis. However, the concentration of lactic acid in the physiological state is too low to be detected using traditional Raman spectroscopy. We applied silver colloidal nanoparticles‐mediated surface‐enhanced Raman spectroscopy (SERS) for rapid identification and quantification of lactic acid. The standard SERS spectra of lactic acid were defined and the 1395 cm⁻¹ band intensity was used for quantification from 0.3 to 2 mM (R² = 0.99). In clinical blood sample measurement, the ultrafiltration (cutoff value 5 kDa) can efficiently reduce background fluorescence to improve SERS performance. We established identical and optimal procedure by adjusting reaction time and volume ratio of serum and nanoparticles to obtain high SERS reproducibility. Finally, we showed that silver colloidal nanoparticles‐mediated SERS technique was successfully applied to detect lactic acid at physiological concentrations in the blood. Copyright © 2010 John Wiley & Sons, Ltd.     

Preparation of triethylamine stabilized silver nanoparticles for low-temperature sintering

In this article, silver nanoparticles were synthesized by chemical reduction from silver nitrate using triethylamine as the protecting and reducing agents simultaneously. The average size of the silver nanoparticles was about 2.10–4.65 nm, which allowed low-temperature sintering of the metal. X-ray diffraction (XRD), thermogravimetric analysis (TGA), and energy dispersive spectrometric (EDS) analysis results indicate that silver nitrate has been converted to silver nanoparticles completely. Using a 20 wt% silver nanoparticles suspension with thermal treatment at 150 °C, silver films with a resistivity of 8.09 × 10⁻⁵ Ω cm have been produced, which is close to the resistivity of bulk silver.     

Non-linear optical properties of silver nanoparticles prepared by hydrogen reduction method

Silver nanoparticles have been prepared using hydrogen gas as the reducing agent for silver nitrate and poly(vinyl pyrrolidone) as the capping agent; the reaction was carried out at 70 °C for 3 h. The size of the nanoparticles was found to be about 20 nm as analyzed using transmission electron micrographs. The X-ray diffraction pattern revealed the face-centered cubic (fcc) structure of silver nanoparticles. The linear absorption of Ag nanoparticles, α, is obtained about 3.71 cm⁻¹. The non-linear refractive indices of silver nanoparticles were defined by the z-scan technique using CW He-Ne laser (λ = 632.8 nm) at different incident intensities. The magnitude of non-linear refractive index (n₂) was measured to be in the order of 10⁻⁷ (cm²/W) with a negative sign. Therefore self-defocusing phenomena is taking placed for Ag nanoparticles.     

New Perspectives of Using Chitosan,Silver, and Chitosan–Silver Nanoparticles against Multidrug-Resistant Bacteria

Nanomaterials with antimicrobial activity are promising alternatives to overcome microbial resistance in medical devices. Catheters, probes, and wound dressings are among the medical devices mostly affected by microbial contamination and the formation of polymicrobial biofilms. Nanoparticles (NPs) derived from natural sources, such as chitosan nanoparticles (CsNPs), and metal-based nanoparticles, including silver nanoparticles (AgNPs), are receiving increased interest in nanomedicine. CsNPs have been widely explored as a coating material and antimicrobial agent. AgNPs have a strong antimicrobial effect against bacteria and fungi. The nanocomposite chitosan–silver nanoparticles (Cs-AgNPs) can be more effective against several microorganisms, including multidrug-resistant bacteria, due to the synergistic effect between chitosan and silver. This review addresses the most used synthesis methods, including green routes, to produce CsNPs, AgNPs, and Cs–AgNPs. It also discusses physicochemical characteristics and antimicrobial properties of these NPs in medical, pharmaceutical, and biotechnological areas.     

One-step synthesis and antibacterial property of water-soluble silver nanoparticles by CGJ bio-template

In this article, a new synthetic method of nanoparticles with fresh Chinese gooseberry juice (CGJ) as bio-template was developed. One-step synthesis of highly water-soluble silver nanoparticles at room temperature without using any harmful reducing agents and special capping agent was fulfilled with this method. In the process, the products were obtained by adding AgNO₃ to CGJ, which was used as reducing agent, capping agent, and the bio-template. The products of silver nanoparticles with diameter of 10–30 nm have strong water solubility and excellent antibiotic function. With the same concentration 0.047 μg mL⁻¹, the antibacterial effect of water-soluble silver particles by fresh CGJ was 53%, whereas only 27% for silver nanoparticles synthesized using the template method of fresh onion inner squama coat (OISC). The excellent water solubility of the products would enable them have better applications in the bio-medical field. The synthetic method would also have potential application in preparing other highly water-soluble particles, because of its simple apparatus, high yield, mild conditions, and facile operation.     

One-Pot Scalable Fabrication of Chitosan-Capped Antibacterial Sulfur Nanoparticles from Elemental Sulfur

Sulfur nanoparticles (SNPs) have shown good potential in numerous fields due to their unique composition and properties. However, the direct utilization of abundant and inexpensive elemental sulfur for the large-scale fabrication of high-quality SNPs is still in its infancy. Herein, a simple one-pot approach for the preparation of SNPs is presented, and gram-scale SNPs can be readily prepared in one batch in the laboratory. By adding elemental sulfur-ethylenediamine precursor to the acidic chitosan (CS) solution, chitosan-capped sulfur nanoparticles (CS-SNPs) can be formed immediately. Benefiting from the capping of CS, CS-SNPs simultaneously possess small and uniform size with an average diameter of 19 nm, good aqueous dispersibility and stability, and favorable antioxidant capability against 2,2′-azino-bis (3-ethylbenzothiazoline-6-sulfonic acid) free radicals. Moreover, CS-SNPs also exhibit fine antibacterial activity against Staphylococcus aureus, and the minimum and optimal inhibitory concentrations are 256 and 512 µg mL⁻¹, respectively. Considering the easy fabrication process and attractive attributes of CS-SNPs, this investigation not only offers an effective method for the scalable fabrication of robust SNPs but also provides a feasible way for the value-added utilization of elemental sulfur.     

An insight into the effect of composition for enhance catalytic performance of biogenic Au/Ag bimetallic nanoparticles

A comprehensive knowledge of composition‐activity property relationship of nanoparticulate materials is highly desirable for applications in various catalysis reactions. We have addressed a facile green aqueous approach for preparation of Au, Ag monometallic, Au/Ag alloy as well as core‐shell bimetallic nanoparticles. The phytochemicals present in lemon grass leaves extract were employed both as natural reducing and capping agents at room temperature. X‐ray diffraction pattern, UV‐Vis spectroscopy, and energy dispersive X‐ray studies confirmed the formation of bimetallic system. The ensuing Au core/Ag shell and Au/Ag alloy bimetallic nanoparticles were crystalline and spherical in nature with identical average diameter of ~ 18 nm as measured via transmission electron microscopy. The bimetallic systems incredibly display higher catalytic potential than their monometallic counterparts which were vividly reckoned on structural effect, lattice compression, and synergistic electronic effect.     

Determination of gold and silver in dross using EDXRF technique

Gold and silver in dross were determined by energy‐dispersive X‐ray fluorescence technique. Sample was prepared by pressed pellet method using microcrystalline cellulose powder as binder, and a method of standard additions was used for quantification. L_β X‐ray of gold (11.4 keV) and K_β X‐ray of silver (24.9 keV) were used for analysis. The measured concentrations of gold and silver were 132 ± 8 and 1181 ± 84 mg kg^?1, respectively. The results were validated by instrumental neutron activation analysis technique. The t‐test indicated that there was no significant difference between results obtained by the two techniques. Energy‐dispersive X‐ray fluorescence is a simple, precise and accurate technique for the determination of gold and silver in dross. Copyright © 2014 John Wiley & Sons, Ltd.     

Preparation of silver nanoparticles on zinc oxide nanowires by photocatalytic reduction for use in surface‐enhanced Raman scattering measurements

To increase the sensitivity in surface‐enhanced Raman scattering (SERS) measurements, the high surface area of zinc oxide nanowires (ZnO NWs) was used. ZnO NWs on silicon substrates were prepared and used as substrates for further growth of silver nanoparticles (AgNPs). Ultraviolet (UV) irradiation was used to reduce silver ions to AgNPs on the ZnO wires. With proper growth conditions for both ZnO NWs and AgNPs, the substrates exhibit SERS enhancement factors greater than 10⁶. To understand the influences of the morphologies of the ZnO NWs on the growth of AgNPs, the growing time and temperature were varied. The concentration of silver nitrate and irradiation time of UV radiation were also varied. The resulting AgNPs were probed with para‐nitrothiophenol to quantify the SERS enhancements obtained from the varying conditions. The results indicate that ZnO NWs could be grown at temperatures higher than 490 °C and higher growth temperatures result in smaller diameter of the formed ZnO NWs. Also, the morphologies of ZnO NWs did not significantly alter the SERS signals. The concentration of silver nitrate affects the SERS signals significantly and the optimal concentration was found to be in the range of 10–20 mM. With irradiation times longer than 90 s, the resulting AgNPs showed similar SERS intensities. With optimized conditions, the AgNPs/ZnO substrates are highly suitable for SERS measurements with a typical enhancement factor of higher than 10⁶. Copyright © 2010 John Wiley & Sons, Ltd.     

The effect of concentration on the thermo-optical properties of colloidal silver nanoparticles

The thermo-optical properties of colloidal silver nanoparticles (AgNPs) are investigated under a low power laser irradiation at 532 nm. Colloidal AgNPs are synthesized by nanosecond pulsed laser ablation of a pure silver plate in distilled water. The morphology and size of the AgNPs are determined by transmission electron microscopy. Closed Z-scan measurements reveal that nonlocal thermo-optic process is responsible for the nonlinear refractive index of colloid containing different concentrations of silver nanoparticles. The Z-scan behavior of the nanoparticle samples has been investigated based on a nonlocal thermo-optic process and it is shown that the aberrant thermal lens model is in excellent agreement with the experimental results. Z-scan measurement fits have allowed the values of nonlinear refractive index (n₂) and thermo-optic coefficients (dn/dt) to be determined at different concentrations of silver nanoparticles. Large enhancement factors were measured for values of n₂ and dn/dt of the colloids at higher silver nanoparticle volume fraction. Our results suggest that nonlocal thermal nonlinear processes will play an important role in the development of photonic applications involving metal nanoparticle colloids.     

Surface‐enhanced Raman scattering of silylated graphite oxide sheets sandwiched between colloidal silver nanoparticles and silver piece

Graphite oxide (GO) was successfully silylated by 3‐mercaptopropyltrimethoxysilane. The surface‐enhanced Raman scattering spectrum of the silylated GO sheets sandwiched between colloidal silver nanoparticles and silver piece is presented. The Raman signal shows a 10⁴ enhancement compared to that of bulk GO. The large Raman enhancement is most likely a result of electromagnetic (EM) coupling between the colloidal silver nanoparticles (localized surface plasmon) and the silver piece (surface plasmon polariton), creating large localized EM fields at their interface, where the silylated GO sheets reside in this sandwich architecture. Copyright © 2009 John Wiley & Sons, Ltd.     

Temperature‐driven directional coalescence of silver nanoparticles

Silver nanoparticles were synthesized with a chemical reduction method in the presence of polyvinylpyrrolidone as stabilizing agent. The thermal stability behavior of the silver nanoparticles was studied in the temperature range from 25 to 700°C. Thermal gravimetric analysis was used to measure the weight loss of the silver nanoparticles. Scanning electron microscopy and high‐resolution transmission electron microscopy were used to observe the morphology and the change in shape of the silver nanoparticles. In situ temperature‐dependent small‐angle X‐ray scattering was used to detect the increase in particle size with temperature. In situ temperature‐dependent X‐ray diffraction was used to characterize the increase in nanocrystal size and the thermal expansion coefficient. The results demonstrate that sequential slow and fast Ostward ripening are the main methods of nanoparticle growth at lower temperatures (<500°C), whereas successive random and directional coalescences are the main methods of nanoparticle growth at higher temperatures (>500°C). A four‐stage model can be used to describe the whole sintering process. The thermal expansion coefficient (2.8 × 10^?5 K^?1) of silver nanoparticles is about 30% larger than that of bulk silver. To our knowledge, the temperature‐driven directional coalescence of silver nanocrystals is reported for the first time. Two possible mechanisms of directional coalescence have been proposed. This study is of importance not only in terms of its fundamental academic interest but also in terms of the thermal stability of silver nanoparticles.     

Study of interfacial charge transfer in nanosemiconductor–molecule composites

Interaction of sol–gel synthesized Ce–Ag‐codoped ZnO (CSZO) nanocrystals with (E)‐1‐(naphthalen‐1‐yl)‐2‐styryl‐1H‐phenanthro[9,10‐d]imidazole has been analysed. The synthesized nanocrystals and their composites with naphthyl styryl phenanthrimidazole have been characterized using scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive X‐ray spectroscopy, X‐ray diffractometry, X‐ray photoelectron spectroscopy (XPS) lifetime and Fourier transform infrared spectroscopy and cyclic voltammetry. XPS shows doped silver and cerium in Ag⁰ and Ce⁴⁺ states, respectively_. SEM and TEM images of CSZO nanoparticles show that they appear to be 3D trapezoid and cocoon‐like shape. The selected area electron diffraction pattern supports the nanocrystalline character of the synthesized material. The percentages of doping of cerium and silver in CSZO are 0.54 (at.) and 0.34 (at.), respectively. From the energy levels of the materials used in the imidazole–CSZO composite, the dominant CT direction has been analysed. Theoretical investigation shows that the binding energy and energy gap of the imidazole composites are highly dependent on the nature of the silver oxide cluster and that charge transfer in the imidazole–Ag₄O₄ composite is faster than the same in other composites. Molecular docking technique has also been carried out to understand the imidazole–DNA interactions. Copyright © 2016 John Wiley & Sons, Ltd.