Rapid extra-/intracellular biosynthesis of gold nanoparticles by the fungus <Emphasis Type="Italic">Penicillium</Emphasis> sp.

In this work, the fungus Penicillium was used for rapid extra-/intracellular biosynthesis of gold nanoparticles. AuCl₄ ⁻ ions reacted with the cell filtrate of Penicillium sp. resulting in extracellular biosynthesis of gold nanoparticles within 1 min. Intracellular biosynthesis of gold nanoparticles was obtained by incubating AuCl₄ ⁻ solution with fungal biomass for 8 h. The gold nanoparticles were characterized by means of visual observation, UV–Vis absorption spectroscopy, X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDX). The extracellular nanoparticles exhibited maximum absorbance at 545 nm in UV–Vis spectroscopy. The XRD spectrum showed Bragg reflections corresponding to the gold nanocrystals. TEM exhibited the formed spherical gold nanoparticles in the size range from 30 to 50 nm with an average size of 45 nm. SEM and TEM revealed that the intracellular gold nanoparticles were well dispersed on the cell wall and within the cell, and they are mostly spherical in shape with an average diameter of 50 nm. The presence of gold was confirmed by EDX analysis.     

Microwave-assisted rapid extracellular synthesis of stable bio-functionalized silver nanoparticles from guava (<Emphasis Type="Italic">Psidium guajava</Emphasis>) leaf extract

Our research interest centers on microwave-assisted rapid extracellular synthesis of bio-functionalized silver nanoparticles of 26 ± 5 nm from guava (Psidium guajava) leaf extract with control over dimension and composition. The reaction occurs very rapidly as the formation of spherical nanoparticles almost completed within 90 s. The probable pathway of the biosynthesis is suggested. Appearance, crystalline nature, size and shape of nanoparticles are understood by UV–vis (UV–vis spectroscopy), FTIR (fourier transform infrared spectroscopy), XRD (X-ray diffraction), FESEM (field emission scanning electron microscopy) and TEM (transmission electron microscopy) techniques. Microwave-assisted route is selected for the synthesis of silver nanoparticles to carry out the reaction fast, suppress the enzymatic action and to keep the process environmentally clean and green.     

Fusarium solani: a novel biological agent for the extracellular synthesis of silver nanoparticles

We report extracellular biosynthesis of silver nanoparticles by Fusarium solani (USM-3799), a phytopathogen causing disease in onion, when challenged with 1 mM silver nitrate (AgNO₃). The formation of nanoparticles was characterized by visual observation followed by UV–Vis spectrophotometric analysis, which showed a peak at about 420 nm, which is very specific for silver nanoparticles. Further analysis carried out by Fourier Transform Infrared Spectroscopy (FTIR), provides evidence for the presence of proteins as capping agent, which helps in increasing the stability of the synthesized silver nanoparticles. Transmission Electron Microscopy (TEM) investigations confirmed that silver nanoparticles were formed. The synthesized silver nanoparticles were found to be polydispersed, spherical in the range of 5–35 nm with average diameter of 16.23 nm. Extracellular synthesis of nanoparticles could be highly advantageous from the point of view of synthesis in large quantities and easy downstream processing.     

Synthesis and characterization of silver nanoparticles: effect on phytopathogen <Emphasis Type="Italic">Colletotrichum gloesporioides</Emphasis>

Colloidal silver nanoparticles were synthesized by reducing silver nitrate solutions with glucose, in the presence of gelatin as capping agent. The obtained nanoparticles were characterized by means of UV–Vis spectroscopy, transmission electron microscopy (TEM), and Fourier transform infrared (FTIR) spectroscopy. The response surface methodology (RSM) was also used to determine the influence of the variables on the size of the nanoparticles. The antifungal activity of the silver nanoparticles was evaluated on the phytopathogen Colletotrichum gloesporioides, which causes anthracnose in a wide range of fruits. The UV–Vis spectra indicated the formation of silver nanoparticles preferably spherical and of relatively small size (<20 nm). The above-mentioned was confirmed by TEM, observing a size distribution of 5–24 nm. According to RSM the synthesis variables influenced on the size of the silver nanoparticles. By means of FTIR spectroscopy it was determined that gelatin, through their amide and hydroxyl groups, interacts with nanoparticles preventing their agglomeration. The growth of C. gloesporioides in the presence of silver nanoparticles was significantly delayed in a dose dependent manner.     

Green synthesis of silver nanoparticle by <Emphasis Type="Italic">Penicillium purpurogenum</Emphasis> NPMF: the process and optimization

An eco-friendly microbial method for synthesis of silver colloid solution with antimicrobial activity is developed using a fungal strain of Penicillium purpurogenum NPMF. It is observed that increase in concentration of AgNO₃ increases the formation of silver nanoparticle. At 5 mM concentration highly populated polydispersed nanoparticles form. Furthermore, change in pH of the reaction mixture leads to change in shape and size of silver nanoparticles. At lower pH two peaks are observed in the absorption spectra showing polydispersity of nanoparticles. However, highly monodispersed spherical nanoparticles of 8–10 nm size form with 1 mM AgNO₃ concentration at pH 8. Antimicrobial activity of nanoparticles is demonstrated against pathogenic gram negative bacteria like Escherichia coli and Pseudomonas aeruginosa, and gram positive bacteria like Staphylococcus aureus. The antimicrobial activity of silver nanoparticles obtained at different initial pH show strong dependence on the surface area and shape of the nanoparticles.     

UV-induced synthesis,characterization and formation mechanism of silver nanoparticles in alkalic carboxymethylated chitosan solution

The silver nanoparticles (AgNPs) were synthesized in an alkalic aqueous solution of silver nitrate (AgNO₃)/carboxymethylated chitosan (CMCTS) with ultraviolet (UV) light irradiation. CMCTS, a water-soluble and biocompatible chitosan derivative, served simultaneously as a reducing agent for silver cation and a stabilizing agent for AgNPs in this method. UV–vis spectra and transmission electron microscopy (TEM) images analyses showed that the pH of AgNO₃/CMCTS aqueous solutions, the concentrations of AgNO₃ and CMCTS can affect on the size, amount of synthesized AgNPs. Further by polarized optical microscopy it was found that the CMCTS with a high molecular weight leads to a branch-like AgNPs/CMCTS composite morphology. The diameter range of the AgNPs was 2–8 nm and they can be dispersed stably in the alkalic CMCTS solution for more than 6 months. XRD pattern indicated that the AgNPs has cubic crystal structure. The spectra of laser photolysis of AgNO₃/CMCTS aqueous solutions identified the early reduction processes of silver cations (Ag⁺) by hydrated electron formed by photoionization of CMCTS. The rate constant of corresponding reduction reaction was 5.0 × 10⁹ M⁻¹ s⁻¹.     

Silver nanoparticles with gelatin nanoshells: photochemical facile green synthesis and their antimicrobial activity

In the current study, a facile green synthesis of silver-gelatin core–shell nanostructures (spherical, spherical/cubic hybrid, and cubic, DLS diameter: 4.1–6.9 nm) is reported via the wet chemical synthesis procedure. Sunlight-UV as an available reducing agent cause mild reduction of silver ions into the silver nanoparticles (Ag-NPs). Gelatin protein, as an effective capping/shaping agent, was used in the reaction to self-assemble silver nanostructures. The formation of silver nanostructures and their self-assembly pattern was confirmed by SEM, AFM, and TEM techniques. Further investigations were carried out using zeta-potential, UV–Vis, FTIR, GPC, and TGA/DTG/DTA data. The prepared Ag-NPs showed proper and acceptable antimicrobial activity against three classes of microorganisms (Escherichia coli Gram-negative bacteria, Staphylococcus aureus Gram-positive bacteria, and Candida albicans fungus). The antibacterial and antifungal Ag-NPs exhibit good stability in solution and can be considered as promising candidates for a wide range of biomedical applications.     

Green synthesis of silver nanoparticles by Phoma glomerata

We report an extracellular synthesis of silver nanoparticles (SNPs) by Phoma glomerata (MTCC-2210). The fungal filtrate showed rapid synthesis in bright sunlight. The Fourier transform infrared spectroscopy (FTIR) revealed the presence of a protein cap on the silver nanoparticle, which leads to increase stability of SNP in the silver colloid. X-ray diffraction (XRD) analysis showed the number of Bragg's reflection, which are due to the face centered cubic structure of the crystalline SNPs. Transmission electron microscopy (TEM), scanning electron microscopy (SEM), nanoparticle tracking and analysis (NTA) demonstrated the synthesis of polydispersive and spherical SNPs. Energy dispersive X-ray spectroscopy (EDX) was used to confirm the elemental composition of the sample and Zeta potential measurement was carried out to determine the stability of mycofabricated SNPs.The alkaline pH, room temperature, sunlight demonstrated optimum synthesis. Apart from the physical conditions, concentration of silver nitrate and amount of fungal filtrate affects the mycofabrication process. The study of cultural and physical parameters during the mycofabrication of SNPs by P. glomerata will be helpful in order to increase the yield of mycofabricated SNPs of desired shape and size. The process of mycofabrication of SNPs by P. glomerata was found to be eco-friendly, safe and cost-effective nature.     

Biosynthesis of silver nanoparticles using <Emphasis Type="Italic">Ocimum sanctum</Emphasis> (Tulsi) leaf extract and screening its antimicrobial activity

Development of green nanotechnology is generating interest of researchers toward ecofriendly biosynthesis of nanoparticles. In this study, biosynthesis of stable silver nanoparticles was done using Tulsi (Ocimum sanctum) leaf extract. These biosynthesized nanoparticles were characterized with the help of UV–vis spectrophotometer, Atomic Absorption Spectroscopy (AAS), Dynamic light scattering (DLS), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and Transmission electron microscopy (TEM). Stability of bioreduced silver nanoparticles was analyzed using UV–vis absorption spectra, and their antimicrobial activity was screened against both gram-negative and gram-positive microorganisms. It was observed that O. sanctum leaf extract can reduce silver ions into silver nanoparticles within 8 min of reaction time. Thus, this method can be used for rapid and ecofriendly biosynthesis of stable silver nanoparticles of size range 4–30 nm possessing antimicrobial activity suggesting their possible application in medical industry.     

Chitosan loaded with silver nanoparticles,CS‐AgNPs,using thymus syriacus,wild mint,and rosemary essential oil extracts as reducing and capping agents

The present study describes the green method for the preparation of chitosan loaded with silver nanoparticles (CS‐AgNPs) in the presence of 3 different extracted essential oils. The essential oils play dual roles as reductant and capping agents. The reducing power and DPPH (2,2‐diphenyl‐1‐picrylhydrazyl) assay for the 3 essential oils—Thymus syriacus (T), wild mint (M), and rosemary (R)—have been reported. The preparation of CS‐AgNPs was performed by 2 steps. The 3 previously extracted essential oils have been used as reducing and capping agent in the first step, while in the second step, silver nanoparticles were integrated in chitosan. The integration of AgNPs in the structure of chitosan was confirmed by ultraviolet‐visible, Fourier transform infrared spectroscopy, scanning electron microscopy techniques, and energy dispersive X‐ray. Surface plasmon resonance confirmed the formation of CS‐AgNPs with maximum absorbance at λ_max between 405 ‐ 410 and 410 ‐ 430 nm for colloidal and films of CS‐AgNPs, respectively. The intensity of bands at 3408 cm^?1 in the fourier transform infrared spectroscopy measurements was decreased substantially and shifted slightly to lower frequency (?υ = 43 cm^?1). Scanning electron microscopy shows a spherical morphology of AgNPs with size of 62 nm for both colloidal and film samples, and energy dispersive X‐ray analysis shows peaks confirming AgNPs formation.     

Highly bacterial resistant silver nanoparticles: synthesis and antibacterial activities

In this article, we describe a simple one-pot rapid synthesis route to produce uniform silver nanoparticles by thermal reduction of AgNO₃ using oleylamine as reducing and capping agent. To enhance the dispersal ability of as-synthesized hydrophobic silver nanoparticles in water, while maintaining their unique properties, a facile phase transfer mechanism has been developed using biocompatible block co-polymer pluronic F-127. Formation of silver nanoparticles is confirmed by X-ray diffraction (XRD), transmission electron microscopy (TEM) and UV–vis spectroscopy. Hydrodynamic size and its distribution are obtained from dynamic light scattering (DLS). Hydrodynamic size and size distribution of as-synthesized and phase transferred silver nanoparticles are 8.2 ± 1.5 nm (σ = 18.3%) and 31.1 ± 4.5 nm (σ = 14.5%), respectively. Antimicrobial activities of hydrophilic silver nanoparticles is tested against two Gram positive (Bacillus megaterium and Staphylococcus aureus), and three Gram negative (Escherichia coli, Proteus vulgaris and Shigella sonnei) bacteria. Minimum inhibitory concentration (MIC) values obtained in the present study for the tested microorganisms are found much better than those reported for commercially available antibacterial agents.     

A sunlight-induced method for rapid biosynthesis of silver nanoparticles using an <Emphasis Type="Italic">Andrachnea chordifolia</Emphasis> ethanol extract

In this study a sunlight-induced method for rapid synthesis of silver nanoparticles using an ethanol extract of Andrachnea chordifolia is described. The silver nitrate solutions (1 mM) containing the ethanol extract of Andrachnea chordifolia were irradiated by both sunlight radiation and by sunlight radiation passed through different colored filters (red, yellow or green). The smallest size of silver nanoparticles was obtained when a silver ion solution was irradiated for 5 minutes by direct sunlight radiation. Further examination of the shape and size and of the surface chemistry of these biogenic silver nanoparticles, which were prepared under sunlight radiation, was carried out using transmission electron microscopy and infrared spectroscopy, respectively. Transmission electron microscopy images show spherical particles with an average size of 3.4 nm. Hydroxyl residues were also detected on the surface of these biogenic silver nanoparticles fabricated using plant extract of Andrachnea chordifolia under sunlight radiation. Our study on the reduction of silver ions by this plant extract in darkness shows that the synthesis process can take place under dark conditions at much longer incubations (48 hours). Larger silver polydispersed nanoparticles ranging in size from 3 to 30 nm were obtained when the silver ions were treated with the ethanol extract of Andrachnea chordifolia under dark conditions for 48 hours.     

Use of a silver ion selective electrode to assess mechanisms responsible for biological effects of silver nanoparticles

For a detailed analysis of the biological effects of silver nanoparticles, discrimination between effects related to the nano-scale size of the particles and effects of released silver ions is required. Silver ions are either present in the initial particle dispersion or released by the nanoparticles over time. The aim of this study is to monitor the free silver ion activity {Ag⁺} in the presence of silver nanoparticles using a silver ion selective electrode. Therefore, silver in the form of silver nanoparticles, 4.2 ± 1.4 nm and 2–30 nm in size, or silver nitrate was added to cell culture media in the absence or presence of A549 cells as a model for human type II alveolar epithelial cells. The free silver ion activity measured after the addition of silver nanoparticles was determined by the initial ionic silver content. The p {Ag⁺} values indicated that the cell culture media decrease the free silver ion activity due to binding of silver ions by constituents of the media. In the presence of A549 cells, the free silver ion activity was further reduced. The morphology of A549 cells, cultivated in DME medium containing 9.1% (v/v) FBS, was affected by adding AgNO₃ at concentrations of ≥30 μM after 24 h. In comparison, silver nanoparticles up to a concentration of 200 μM Ag did not affect cellular morphology. Our experiments indicate that the effect of silver nanoparticles is mainly mediated by silver ions. An effect of silver on cellular morphology was observed at p {Ag⁺} ≤ 9.2.     

Preparation of triethylamine stabilized silver nanoparticles for low-temperature sintering

In this article, silver nanoparticles were synthesized by chemical reduction from silver nitrate using triethylamine as the protecting and reducing agents simultaneously. The average size of the silver nanoparticles was about 2.10–4.65 nm, which allowed low-temperature sintering of the metal. X-ray diffraction (XRD), thermogravimetric analysis (TGA), and energy dispersive spectrometric (EDS) analysis results indicate that silver nitrate has been converted to silver nanoparticles completely. Using a 20 wt% silver nanoparticles suspension with thermal treatment at 150 °C, silver films with a resistivity of 8.09 × 10⁻⁵ Ω cm have been produced, which is close to the resistivity of bulk silver.     

Formation of fractal aggregates during green synthesis of silver nanoparticles

The aggregation behavior of silver nanoparticles (AgNPs) prepared by a green synthesis procedure using starch as the stabilizer was studied by the small angle X-ray scattering (SAXS) technique. The protecting ability of starch was affected by the presence of NaOH leading to different aggregation behaviors. In all the samples, mass as well as surface fractal regimes were observed. Assuming spherical form, the radii of nanoparticles were in the range of 11–17 nm.     

A novel method for synthesis of colloidal silver nanoparticles by arc discharge in liquid

This paper presents a novel, inexpensive and one-step approach for synthesis of silver nanoparticles (Ag NPs) using arc discharge between titanium electrodes in AgNO₃ solution. The resulting nanoparticles were characterized using UV–Vis spectroscopy, scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Silver nanoparticles of 18 nm diameter were formed during reduction of AgNO₃ in plasma discharge zone. Optical absorption spectroscopy of as prepared samples at 15 A arc current in AgNO₃ solution shows a surface plasmon resonance around 410 nm. It was found that sodium citrate acts as a stabilizer and surface capping agent of the colloidal nanoparticles. SEM images exhibit the increase of reduced nanoparticles in 6 min arc duration compared with 1 min arc duration. TEM image of the sample prepared at 6 min arc duration shows narrow size distribution with 18 nm mean particle size. Antibacterial activities of silver nanoparticles were investigated at the presence of Escherichia coli (E-coli) bacteria.     

Biomimetic Synthesis of Silver Nanoparticle Using Leaf Extract of Mangifera Indica and Their Antibacterial Efficacy

The aim of this study to focused on bioinspired synthesis of silver nanoparticles (AgNPs) as a viable alternative to eradicate the existing physicochemical processes. In this context, the bioinspired AgNPs were synthesized using leaf extract of M. indica. Optimization of the experimental conditions for the rapid and high yield of AgNPs in minimum investment of time and expense have been carried out along with their antibacterial efficacy evaluated. For this reason, the variation of parameters like the concentration of the silver precursors, reducing agent, time, pH, and temperature of synthesis were realized. Synthesized AgNPs were characterized by UV-Visible spectroscopy, X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and transmission electron microscopy (TEM) techniques. UV-Visible spectra gave surface plasmon resonance (SPR) at 440 nm for AgNPs. Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) techniques were further confirmed the synthesis and crystalline nature of AgNPs respectively. Transmission electron microscopy (TEM) observed spherical shapes of synthesized AgNPs within range 5～20 nm. The results of the current study indicate that optimization process play a pivotal role in the AgNPs synthesis and biogenic synthesized AgNPs might be used against bacterial pathogens.     

Controlled synthesis of CeO<Subscript>2</Subscript> nanoparticles using novel amphiphilic cerium complex precursors

Maleic anhydride was grafted by long-chain alcohols (1-hexadecanol, 1-octadecanol) to amphiphilic mono-L cis-butene dicarboxylates (L = hexadecyl, octadecyl), i.e., MAH, MAO, respectively. Subsequently, corresponding amphiphilic cerium complexes with these two mono-L cis-butene dicarboxylate ligands (Ce(L')₃, L'= MAH, MAO) were synthesized and behaved as the precursors to prepare CeO₂ nanoparticles for both of which can form nanosized micelle-like aggregates by special self-assembly in the wet chemical process. The nanoparticles were further characterized by Fourier transform-infrared spectroscopy (FTIR), Diffuse reflectance ultraviolet-visible spectra (DRUVS), scanning electron microscope (SEM), transmission electron microscope (TEM), and x-ray diffraction (XRD). Both the CeO₂ nanoparticles are in a cubic fluorite structure and present regular and well-dispersion club-like morphology with average particle size in the range of 40–70 nm. Besides, the strong ultraviolet–visible absorption for these CeO₂ nanoparticles can be found at the long-wavelength ultraviolet to visible region of 200–500 nm.     

One-step synthesis and antibacterial property of water-soluble silver nanoparticles by CGJ bio-template

In this article, a new synthetic method of nanoparticles with fresh Chinese gooseberry juice (CGJ) as bio-template was developed. One-step synthesis of highly water-soluble silver nanoparticles at room temperature without using any harmful reducing agents and special capping agent was fulfilled with this method. In the process, the products were obtained by adding AgNO₃ to CGJ, which was used as reducing agent, capping agent, and the bio-template. The products of silver nanoparticles with diameter of 10–30 nm have strong water solubility and excellent antibiotic function. With the same concentration 0.047 μg mL⁻¹, the antibacterial effect of water-soluble silver particles by fresh CGJ was 53%, whereas only 27% for silver nanoparticles synthesized using the template method of fresh onion inner squama coat (OISC). The excellent water solubility of the products would enable them have better applications in the bio-medical field. The synthetic method would also have potential application in preparing other highly water-soluble particles, because of its simple apparatus, high yield, mild conditions, and facile operation.     

Hydrothermal synthesis of ultra-highly concentrated,well-stable Ag nanoparticles and their application for enzymeless hydrogen peroxide detection

In this article, we have reported on the synthesis of ultra-highly concentrated (5.88 M), well-stable Ag nanoparticles (AgNPs). The AgNPs were formed by hydrothermal heat treatment of an aqueous solution of poly [(2-ethyldimethylammonioethyl methacrylate ethyl sulfate)-co-(1-vinylpyrrolidone)] (PQ11), a kind of cationic polyeletrolyte, in the presence of AgNO₃ powder at 170 °C, without the additional step of introducing other reducing agents and protective agents. Transmission electron microscopy (TEM) observations reveal that the as-formed AgNPs mainly consist of small nanoparticles about 10 nm in diameter. Most importantly, it was found that such dispersion can form stable films on bare electrode surfaces and the AgNPs contained therein still exhibit notable catalytic performance for reduction of hydrogen peroxide (H₂O₂). This H₂O₂ sensor has a fast amperometric response time of less than 3 s. Its linear range is estimated to be from 0.1 to 60 mM (r = 0.993), and the detection limit is estimated to be 1.6 μM at a signal-to-noise ratio of 3.