Crystal structures,elastic, and lattice dynamical properties of BeB2, NaB2, and CaB2 from the first principles

Based on density functional theory, we have studied the structural stability, elastic, mechanical, and lattice dynamical properties of BeB₂, NaB₂, and CaB₂ compounds in AlB₂, OsB₂, and ReB₂ structures, respectively. Generalized gradient approximation has been used for modeling exchange-correlation effects. Our calculations indicate that ReB₂, AlB₂, and OsB₂ structures are energetically the most stable for BeB₂, NaB₂, and CaB₂ compounds, respectively. The results show that these structures are both mechanically and dynamically stable. The bulk modulus, elastic constants, shear modulus, Young’s modulus, Poisson’s ratio, Debye temperature, sound velocities, and anisotropic factors are also calculated and discussed. Furthermore, the phonon dispersion curves and corresponding phonon density of states are presented. Our structural and some other results are in agreement with the available experimental and theoretical data.     

5d过渡金属二硼化物的结构和热、力学性质的第一性原理计算

利用基于密度泛函理论的第一性原理系统地研究了5d过渡金属二硼化物TMB₂ (TM=Hf–Au) 的结构、热学、力学和电学性质. 我们考虑了三种结构, 分别为AlB₂, ReB₂和WB₂结构. 计算得到的晶格常数与先前的理论和实验研究符合得很好. 通过计算生成焓预测了化合物的热力学稳定性; 从HfB₂到AuB₂, 生成焓的整体趋势是逐渐增加的. 在所考虑的结构中, 对HfB₂和TaB₂, AlB₂结构是最稳定的; 对WB₂, ReB₂, OsB₂, IrB₂和AuB₂, ReB₂结构是最稳定的; 对PtB₂, WB₂结构是最稳定的. 在所考虑的化合物中, ReB₂结构的ReB₂具有最大的剪切模量(295 GPa), 是最硬的化合物, 与先前的理论和实验结果相符. 计算得到的总态密度显示所有结构都具有金属特性. 讨论了系列化合物的变化趋势. 关键词： 弹性性质 热力学性质 第一性原理 5d过渡金属二硼化物     

Mechanical and lattice dynamical properties of the Re2C compound

In this work, density functional theory calculations on the structural, mechanical, and lattice dynamical properties of Re₂C within ReB₂‐type structure are reported. The generalized gradient approximation has been used for modeling exchange–correlation effects. We have predicted the lattice constants, bulk modulus, bond distances, elastic constants, shear modulus, Young's modulus, Poisson's ratio, hardness, Debye temperature, and sound velocities of this compound. Furthermore, the band structure, phonon dispersion curves and corresponding density of states are computed. The obtained results are in good agreement with the available experimental and other theoretical data. (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Investigation of tetragonal ReN2 and WN2 with high shear moduli from first-principles calculations

Two new transition metal dinitrides, ReN₂ and WN₂, with the P4/mmm structure are investigated by the first-principles calculations. The computed shear moduli of 327 GPa for ReN₂ and 334 GPa for WN₂ exceed those of all transition metal dinitrides previously reported. The estimated theoretical hardness are 46.3 GPa for ReN₂ and 47.9 GPa for WN₂, respectively. The calculated high shear moduli and hardness indicate that they are potential ultrahard materials. It is important to note that the computed hardness of the weakest bond are 34.7 GPa (W-N) for WN₂ and 33.1 GPa (Re-N) for ReN₂, much higher than that of 21.1 GPa (Re-B) for ReB₂, which suggests that tetragonal ReN₂ and WN₂ are probably harder than ReB₂. The total and partial electron density of states and the electron localization function for ReN₂ and WN₂ are analyzed. We attribute the high bulk modulus, shear modulus, and hardness to a three-dimensional covalently bonded framework in tetragonal ReN₂ and WN₂. Our calculations show that tetragonal ReN₂ is expected to be synthesized above 62.7 GPa and tetragonal WN₂ may be hard to be synthesized.     

First-principles investigations on structural,elastic, electronic properties and Debye temperature of orthorhombic Ni3Ta under pressure

The structural, elastic, electronic properties and Debye temperature of Ni₃Ta under different pressures are investigated using the first-principles method based on density functional theory. Our calculated equilibrium lattice parameters at 0 GPa well agree with the experimental and previous theoretical results. The calculated negative formation enthalpies and elastic constants both indicate that Ni₃Ta is stable under different pressures. The bulk modulus B, shear modulus G, Young’s modulus E and Poisson’s ratio ν are calculated by the Voigt–Reuss–Hill method. The bigger ratio of B/G indicates Ni₃Ta is ductile and the pressure can improve the ductility of Ni₃Ta. In addition, the results of density of states and the charge density difference show that the stability of Ni₃Ta is improved by the increasing pressure. The Debye temperature Θ _D calculated from elastic modulus increases along with the pressure.     

Ground state and phonon spectrum of NiSi2

We have studied structural, electronic, elastic and dynamical properties of NiSi₂ by employing the plane wave pseudopotential method based on density functional theory within the local density approximation. The calculated lattice constant, bulk modulus and first-order pressure derivative of the bulk modulus are reported and compared with earlier available experimental and theoretical calculations. Numerical first-principles calculations of the elastic constants were used to calculate C₁₁, C₁₂ and C₄₄ for NiSi₂. The calculated electronic band structure has been compared with angle-resolved photoemission spectroscopy experimental data along the [100] and [111] symmetry directions. A linear response approach to density functional theory is used to derive the phonon dispersion curves and phonon partial density of states. Atomic displacement patterns for NiSi₂ at the Γ, X and L symmetry points are also presented.     

Valence fluctuations in CeIn3 under the effect of pressure

The impacts of pressure on the structural and electronic properties of CeIn₃ have been calculated. The calculations are performed in the presence and the absence of spin-orbit interaction as well as GGA+U using density functional theory within the PBE-GGA approximation. It is shown that energy and density of states analyses are considerably influenced by the spin-orbit interaction. The spin and orbital magnetic moments of Ce are calculated under pressure up to 22 GPa. An almost linear relation is observed between the magnetic moment and the density of states of Ce-4f at Fermi level. At ambient pressure, a good agreement between the values of the electric field gradients, EFG, and bulk modulus with experimental results is observed. The strongest anisotropy in charge distribution originates from In-5p orbital, which has the main contribution to EFG.     

Elastic,electronic and thermodynamic properties of fluoro-perovskite KZnF3 via first-principles calculations

The elastic, electronic and thermodynamic properties of fluoro-perovskite KZnF₃ have been calculated using the full-potential linearized augmented plane wave (FP-LAPW) method. The exchange-correlation potential is treated with the generalized gradient approximation of Perdew-Burke-Ernzerhof (GGA-PBE). Also, we have used the Engel and Vosko GGA formalism (GGA-EV) to improve the electronic band structure calculations. The calculated structural properties are in good agreement with available experimental and theoretical data. The elastic constants C _ij are calculated using the total energy variation with strain technique. The shear modulus, Young’s modulus, Poisson’s ratio and the Lamé coefficients for polycrystalline KZnF₃ aggregates are estimated in the framework of the Voigt-Reuss-Hill approximations. The ductility behavior of this compound is interpreted via the calculated elastic constants C _ij . Electronic and bonding properties are discussed from the calculations of band structure, density of states and electron charge density. The thermodynamic properties are predicted through the quasi-harmonic Debye model, in which the lattice vibrations are taken into account. The variation of bulk modulus, lattice constant, heat capacities and the Debye temperature with pressure and temperature are successfully obtained.     

L12型铝合金的结构、弹性和电子性质的第一性原理研究

运用第一性原理方法研究了L1₂型铝合金相Al₃Sc和Al₃Zr的晶体结构、电子结构和弹性.结合能和形成能的计算表明,两种合金具有较强的合金化能力,且Al₃Zr较Al₃Sc具有更强的结构稳定性.电子结构分析表明,费米能级以下较多的价电子数决定了Al₃Zr具有较强的结构稳定性.计算并分析比较了两种合金相的单晶弹性常数（C₁₁,C₁₂和C₄₄）以及多晶弹性模量（体弹性模量B、剪切模量G、杨氏模量Y、泊松比ν和各向异性因子A）.通过对比实验和其他理论计算结果,进一步分析和解释了两种合金相的力学性质. 关键词： 铝合金 第一性原理 结构和电子性质 弹性     

Structural,elastic, electronic and thermal properties of M2SbP (M = Ti,Zr and Hf)

The structural, elastic, electronic and thermal properties of M₂SbP (M = Ti, Zr and Hf) were studied by means of a pseudo-potential plane-wave method based on the density functional theory within both the local density approximation and the generalised gradient approximation. The optimised zero-pressure geometrical parameters, i.e. the two unit cell lengths (a, c) and the internal coordinate (z), were in good agreement with available experimental and theoretical data. The effect of high pressure, up to 20 GPa, on the lattice constants shows that the contractions along the a-axis were higher than along c-axis. The anisotropic independent elastic constants were calculated using the static finite strain technique. Numerical estimations of the bulk modulus, shear modulus, Young's modulus, Poisson's ratio, average sound velocity and Debye temperature for ideal polycrystalline M₂SbP aggregates were performed in the framework of the Voigt–Reuss–Hill approximation. The calculated band structures show that all studied materials are electrical conductors. Analysis of the atomic site projected densities showed that the bonding is of covalent–ionic nature with the presence of metallic character. The density of states at the Fermi level is dictated by the transition metal d–d bands; the Sb element has little effect. Thermal effects on some macroscopic properties of M₂SbP were predicted using the quasi-harmonic Debye model, in which the lattice vibrations are taken into account. The variations of the volume expansion coefficient, heat capacity and Debye temperature with pressure and temperature in the ranges 0–50 GPa and 0–2000 K were obtained successfully.     

α-Ti2Zr高压物性的第一性原理计算研究

基于密度泛函理论的第一性原理计算获得了α-Ti₂Zr的晶体结构、弹性常数、德拜温度和电子分布情况, 研究了它们与压力的关系. 计算得到的晶体结构参数与实验值一致. 运用有限应变方法计算得到了α-Ti₂Zr的体积模量B、剪切模量G、杨氏模量E和泊松比σ. B和E的零压值分别为101.2和35.6 GPa. G/B的值较小, 并且随着压力的增加而减小, 表明α-Ti₂Zr具有优异的延展性. 基于弹性常数得到平均声速, 从而获得了德拜温度Θ=321.7 K. 通过解Christoffel方程获得的压缩波和剪切波数据揭示α-Ti₂Zr具有较强的各向异性. 此外, 压力诱导电子从s轨道到d轨道的转移说明在一定压力下α-Ti₂Zr将转变为β相. 关键词： 第一性原理 α-Ti₂Zr')" href="#">α-Ti₂Zr 物性 高压     

Ab initio investigation of the structural,elastic and electronic properties of the anti-perovskite TlNCa3

We have investigated the structural, elastic and electronic properties of the anti-perovskite TlNCa₃ using ab initio calculations within the generalized gradient approximation and the local density approximation for the exchange–correlation potential. The lattice constant, bulk modulus, elastic constants and their pressure dependence, energy band structures, density of states and charge density distribution are calculated and analyzed in comparison with the available experimental and theoretical data. The bulk modulus, shear modulus, Young’s modulus, Poisson’s ratio, Lamé’s coefficients, average sound velocity and Debye temperature are numerically estimated for ideal polycrystalline TlNCa₃ aggregates in the framework of the Voigt–Reuss–Hill approximation. This is the first theoretical prediction of the elastic constants and their related properties for TlNCa₃ that requires experimental confirmation.     

The high-pressure structural transition in MnS: an ab initio study

The structural phase transition between B1 (α-MnS) and B3 (β-MnS) is investigated using a density functional theory method. The structural phase transition pressure Pt from α-MnS to β-MnS, which is determined on the basis of the third-order Birch–Murnaghan equation of states, is 30.75?GPa. Also, the lattice parameters a, the bulk modulus B and pressure derivative of bulk modulus B′, which are generally in good agreement with experiments and other theoretical values, are obtained under zero pressure. For further investigation of the structural phase transition pressure of MnS, the relative volumes V/V ₀, the bulk modulus B, first and second pressure derivatives (B′ and B″) of bulk modulus for the two structures of MnS have been calculated under various pressures.     

Mechanical and chemical bonding properties of ground state BeH<Subscript>2</Subscript>

The crystal structure, mechanical properties and electronic structure of ground state BeH₂ are calculated employing the first-principles methods based on the density functional theory. Our calculated structural parameters at equilibrium volume are well consistent with experimental results. Elastic constants, which well obey the mechanical stability criteria, are firstly theoretically acquired. The bulk modulus B, Shear modulus G, Young's modulus E, and Poisson's ratio υ are deduced from the elastic constants. The bonding nature in BeH₂ is fully interpreted by combining characteristics in band structure, density of states, and charge distribution. The ionicity in the Be-H bond is mainly featured by charge transfer from Be 2s to H 1s atomic orbitals while its covalency is dominated by the hybridization of H 1s and Be 2p states. The Bader analysis of BeH₂ and MgH₂ are performed to describe the ionic/covalent character quantitatively and we find that about 1.61 (1.6) electrons transfer from each Be (Mg) atom to H atoms.     

Theoretical study of the structural, elastic, electronic and thermal properties of the MAX phase Nb2SiC

Structural, elastic, electronic and thermal properties of the MAX phase Nb₂SiC are studied by means of a pseudo-potential plane-wave method based on the density functional theory. The optimized zero pressure geometrical parameters are in good agreement with the available theoretical data. The effect of high pressure, up to 40 GPa, on the lattice constants shows that the contractions along the c-axis were higher than those along the a-axis. The elastic constants C_ij and elastic wave velocities are calculated for monocrystal Nb₂SiC. Numerical estimations of the bulk modulus, shear modulus, Young’s modulus, Poisson’s ratio, average sound velocity and Debye temperature for ideal polycrystalline Nb₂SiC aggregates are performed in the framework of the Voigt-Reuss-Hill approximation. The band structure shows that Nb₂SiC is an electrical conductor. The analysis of the atomic site projected densities and the charge density distribution shows that the bonding is of covalent-ionic nature with the presence of metallic character. The density of states at Fermi level is dictated by the niobium d states; Si element has a little effect. Thermal effects on some macroscopic properties of Nb₂SiC are predicted using the quasi-harmonic Debye model, in which the lattice vibrations are taken into account. The variations of the primitive cell volume, volume expansion coefficient, bulk modulus, heat capacity and Debye temperature with pressure and temperature in the ranges of 0-40 GPa and 0-2000 K are obtained successfully.     

第一性原理研究Mg2 Si同质异相体的结构、电子结构和弹性性质

在第一性原理框架下,采用赝势平面波方法研究了三种Mg₂Si同质异相体的晶胞结构、电子结构和弹性性质随压强的变化关系.研究发现,反萤石结构Mg₂Si、反氯铅矿结构Mg₂Si和Ni₂In型Mg₂Si分别在压强为0-7 GPa,7.5-20.2 GPa和21.9-40 GPa范围内能够保持结构稳定.计算获得了不同压强下Mg₂Si的弹性常数、体模量、剪切模量、杨氏模量、泊松比和各向异 关键词： 态密度 电子结构 弹性常数 第一性原理     

过渡金属化合物OsB2与OsO2低压缩性的第一性原理计算研究

利用基于密度泛函理论平面波赝势法的第一性原理计算, 研究了过渡金属化合物OsB₂和OsO₂的金红石相、黄铁矿相与萤石相三种结构在高压下的状态方程和结构特性以及OsO₂可能的高压相变.理论计算结果支持OsB₂与OsO₂的萤石相是潜在超低可压缩性的硬性材料.同时，也分析了它们的电子结构，力求理解大体变模量和高硬度的微观机制.结果表明，可以利用过渡金属高的价电子浓度，掺入硼、氧、碳、氮等轻的元素形成强的 关键词： 过渡金属化合物 密度泛函理论 低压缩性 高压     

Ground state and lattice dynamical study of ionic conductors CaF2, SrF2 and BaF2 using density functional theory

The present paper reports a comprehensive and complementary study on structural, electronic and phonon properties of face centered cubic fluorites, namely CaF₂, BaF₂ and SrF₂, using first principles density functional calculations within the generalized gradient approximation. The calculated lattice constants and bulk modulus are in good agreement with available experimental data. The analysis of band structure and density of states confirms the ionic character for all the three fluorides. The phonon dispersion curves and corresponding phonon density of states obtained in the present work are consistent with the available experimental and other theoretical data. The LO-TO splitting is maximum for CaF₂, which confirms that the ionicity is maximum in the case of CaF₂. The phonon properties for SrF₂ have been calculated for the first time.     

Elastic,mechanical, electronic properties and hardness of Nb2AsC from first principles

The study aims at the elastic, mechanical, electronic properties and hardness of Nb₂AsC using first principles based on the density functional theory method within the generalised gradient approximation. The calculated lattice parameters of Nb₂AsC are in good agreement with the experimental data. The five independent elastic constants are firstly calculated as a function of pressure, and our results indicate that it is mechanically stable in the applied pressure. The elastic anisotropy is examined through the computation of the direction dependence of Young's modulus. The pressure dependences of the bulk modulus, shear modulus, average velocity of acoustic waves and Debye temperature of Nb₂AsC are systematically investigated. The band structure and density of states are discussed, and the results show that the strong hybridisations C p–Nb d and As p–Nb d would be beneficial to the structure stability of Nb₂AsC. Based on the Mulliken population analysis, the hardness of Nb₂AsC is predicted.