Effect of pH value on the structural and magnetic properties of nanocrystalline strontium hexaferrite thin films

Strontium hexaferrite SrFe₁₂O₁₉ thin films have been synthesized at different pH, adjusted by NH₄OH, on the Si (1 0 0) substrate using a spin coating sol-gel process. Fourier transform infrared spectroscopy analysis and theoretical calculations were conducted for determination and controlling metal citrates in solution precursors. X-ray diffraction, scanning electron microscopy and vibrating sample magnetometer were applied to evaluate the composition, microstructure, crystallite size and magnetic properties of the SrFe₁₂O₁₉ thin films. Using the solution with pH 7, the approximately single phase strontium hexaferrite thin films with optimum physical properties can be obtained at calcination temperature of 800 °C. The SrFe₁₂O₁₉ thin films derived from the solution with pH 7 after calcination at 800 °C exhibited crystallite size of 42 nm and magnetic properties of M_s=267 emu/cm³ (at 10 kOe), M_r=134 emu/cm³ and H_c=4290 Oe.     

Effects of high-temperature annealing on magnetic properties of V-doped GaN thin films grown by MOCVD

Metal organic chemical vapor deposition (MOCVD) has been used to grow vanadium-doped GaN (GaN:V) on c-sapphire substrate using VCl₄ as the V source. The as-grown GaN:V exhibited a saturated magnetic moment (M_s) of 0.28 emu/cm³ at room temperature. Upon high-temperature annealing treatment at 1100 °C for 7 min under N₂ ambient, the M_s of the GaN:V increased by 39.28% to 0.39 emu/cm³. We found that rapid thermal annealing leads to a remarkable increase in surface roughness of the V-doped GaN as well as the electron concentration. The annealing also leads to a significant increase in the Curie temperature (T_C), we have identified Curie temperatures about 350 K concluded from the difference between the field-cooled and zero-field-cooled magnetizations. Structure characterization by x-ray diffraction indicated that the ferromagnetic properties are not a result of secondary magnetic phases.     

Magnetic properties of strontium hexaferrite films prepared by pulsed laser deposition

The magnetic properties of strontium hexaferrite (SrFe₁₂O₁₉) films fabricated by pulsed laser deposition on the Si(100) substrate with Pt(111) underlayer have been studied as a function of film thickness (50–700 nm). X-ray diffraction patterns confirm that the films have c-axis perpendicular orientation. The coercivities in perpendicular direction are higher than those for in-plane direction which indicates the films have perpendicular magnetic anisotropy. The coercivity was found to decrease with increasing of thickness, due to the increasing of the grain size and relaxation in lattice strain. The 200 nm thick film exhibits hexagonal shape grains of 150 nm and optimum magnetic properties of M_s=298 emu/cm³ and H_c=2540 Oe.     

Effects of rapid thermal annealing on structural, magnetic and optical properties of Ni-doped ZnO thin films

XPS depth profiles were used to investigate the effects of rapid thermal annealing under varying conditions on the structural, magnetic and optical properties of Ni-doped ZnO thin films. Oxidization of metallic Ni from its metallic state to two-valence oxidation state occurred in the film annealed in air at 600 °C, while reduction of Ni²⁺ from its two-valence oxidation state to metallic state occurred in the film annealed in Ar at 600 and 800 °C. In addition, there appeared to be significant diffusion of Ni from the bottom to the top surface of the film during annealing in Ar at 800 °C. Both as-deposited and annealed thin films displayed obvious room temperature ferromagnetism (RTFM) which was from metallic Ni, Ni²⁺ or both with two distinct mechanisms. Furthermore, a significant improvement in saturation magnetization (M_s) in the films was observed after annealing in air (M_s = 0.036 μ_B/Ni) or Ar (M_s = 0.033 μ_B/Ni) at 600 °C compared to that in as-deposited film (M_s = 0.017 μ_B/Ni). An even higher M_s value was observed in the film annealed in Ar at 800 °C (M_s = 0.055 μ_B/Ni) compared to that at 600 °C mainly due to the diffusion of Ni. The ultraviolet emission of the Ni-doped ZnO thin film was restored during annealing in Ar at 800 °C, which was also attributed to the diffusion of Ni.     

Magnetic properties of CoFeP films prepared by electroless deposition

Structure and magnetization of CoFeP films prepared by the electroless deposition were systematically investigated by varying the bath composition and deposition parameters to optimize soft magnetic properties. The cobalt content in the CoFeP films varies from 40.4 to 94.9 wt% by controlling the bath composition. Increase of the metallic ratio FeSO₄·7H₂O/(CoSO₄·7H₂O+FeSO₄·7H₂O) affects the films’ microstructure, which switches from amorphous to crystalline structure. The magnetic properties of CoFeP films reveal that the coercivity (H_c) values range from 80 up to 185 A/m and the saturation magnetization (M_s) from 82 to 580 eum/g depending on the bath composition, deposition parameters and heat-treatment conditions. Increase of M_s and remanent magnetization (M_r) as well as decrease of H_c are observed for the CoFeP films with bath pH, temperature and the metallic molar ratio increasing. It is also found that the H_c is enhanced with the increase of NaH₂PO₂·H₂O concentration. CoFeP films showing good soft magnetic properties with coercivities less than 140 A/m and M_s close to 600 emu/g can be obtained in high pH bath and thereafter heat treatment. The deposit is found to be suitable as soft magnetic materials for core materials.     

Synthesis and characterization of Ni-doped ZnO: A transparent magnetic semiconductor

We report synthesis of a transparent magnetic semiconductor by incorporating Ni in zinc oxide (ZnO) matrix. ZnO and nickel-doped zinc oxide (ZnO:Ni) thin films (∼60 nm) are prepared by fast atom beam (FAB) sputtering. Both undoped and doped films show the presence of ZnO phase only. The Ni concentration (in at%) as determined by energy dispersive X-ray (EDX) technique is ∼12±2%. Magnetisation measurement using a SQUID magnetometer shows that the Ni-doped films are ferromagnetic, having coercivity (H_c) values 192, 310 and 100 Oe and saturation magnetization (M_s) values of 6.22, 5.32 and 4.73 emu/g at 5, 15 and 300 K, respectively. The Ni-doped film is transparent (>80%) across visible wavelength range. Resistivity of the ZnO:Ni film is ∼2.5×10⁻³ Ω cm, which is almost two orders of magnitude lower than the resistivity (∼4.5×10⁻¹ Ω cm) of its undoped counterpart. Impurity d-band splitting is considered to be the cause of increase in conductivity. Interaction between free charges generated by doping and localized d spins of Ni is discussed as the reason for ferromagnetism in the ZnO:Ni film.     

Synthesis, structural and magnetic study of polycrystalline LaNi1−xMnxO3 films

Polycrystalline double perovskite LaNi_1−xMn_xO₃ (x=0.3, 0.4, 0.5 and 0.7, which is defined as Mn03, Mn04, Mn05 and Mn07, respectively) thin films are successfully deposited on Si (1 0 0) substrates via chemical solution deposition method. Their structural and magnetic properties are measured. All the thin films are of single phase. Raman spectra indicate that relative intensity of Mn05 is stronger than that of others that can be attributed to the higher degree of B-site ordering. The low temperature magnetic moment of Mn05 is about 500 emu/cm³, which is obviously larger than that of Mn03 and Mn07 because of the long-range ordering of Mn and Ni ions in Mn05.     

Room temperature ferromagnetism of amorphous MgO films prepared by pulsed laser deposition

Amorphous MgO thin films were prepared by pulsed laser deposition (PLD) under various oxygen pressures. The structural, magnetic, and optical properties of the films were investigated. All as-deposited samples exhibit room temperature ferromagnetism, which depend strongly on oxygen pressure. It is found that the saturation magnetization (M _s) initially increases with the oxygen pressure, the maximum M _s of 8.57 emu/cm³ is obtained for the MgO film deposited under an oxygen pressure of 2 mTorr. However, the M _s significantly reduces at higher oxygen pressures. Further X-ray photoelectron spectroscopy and photoluminescence demonstrate that the long-range magnetic order in amorphous MgO films can be attributed to the nonstoichiometry effect and the presence of Mg vacancies.     

Optimal growth conditions for GdBa2Cu3O7 thin-film coated conductors characterized by polarized Raman scattering spectroscopy

High temperature superconducting GdBa₂Cu₃O₇ (GdBCO) thin films were grown by pulsed laser ablation. Textured MgO on metal substrates was used as a template for second generation wire applications. Growth conditions of GdBCO thin films were investigated for substrate temperature (T_s) and oxygen partial pressure (PO₂) during deposition. Superconducting critical currents of the films were obtained in the films grown at 790–810 °C of T_s and at 100–700 mTorr of PO₂. Scanning electron micrographs of the films revealed uniform and well-connected grains with some outgrown structures. X-ray θ–2θ scans of the films grown at 810 °C and 300–500 mTorr exhibited c-axis oriented texture. In-plane alignment and c-axis mosaic spread of the films were determined from X-ray Φ scans and rocking curves, respectively. Polarized Raman scattering spectroscopy was used to characterize optical phonon modes, oxygen content, cation disorder, and some possible second phases of the films. The Raman spectra of the films with large critical current density showed modes at 326–329 cm⁻¹, 444–447 cm⁻¹, 500–503 cm⁻¹ related to vibration of oxygen atoms. Origin of small peaks near 600 cm⁻¹ will be discussed as well. The information obtained from Raman scattering measurements will be useful for quality control of the conductors as well as optimization of the process conditions.     

Synthesis and surface modified hard magnetic properties in Co0.5Pt0.5 nanocrystallites from a rheological liquid precursor

Small crystallites of a metastable phase Co_0.5Pt_0.5 are precipitated by heating a rheological liquid precursor of cobalt–hydrazine complex and platinum chloride H₂PtCl₆·xH₂O in polymer molecules of poly(vinylpyrrolidone) (PVP) in ethylene glycol. The hydrazine co-reduces nascent atoms from the Co²⁺ and Pt⁴⁺ that recombine and grow as Co_0.5Pt_0.5. The PVP molecules cap a growing Co_0.5Pt_0.5 as it achieves a critical size so that it stops growing further in given conditions. X-ray diffraction pattern of a recovered powder reveals a crystalline Co_0.5Pt_0.5 phase (average crystallite size D∼8 nm) of a well-known Fm3m-fcc crystal structure with the lattice parameter a=0.3916 nm (density ρ=14.09 g/cm³). A more ordered L1₀ phase (ρ=15.91 g/cm³) transforms (D≥25 nm) upon annealing the powder at temperature lesser than 700 °C (in vacuum). At room temperature, the virgin crystallites bear only a small saturation magnetization M_s=5.54 emu/g (D=8 nm) of a soft magnet and it hardly grows on bigger sizes (D≤31 nm) in a canted ferromagnetic structure. A rectangular hysteresis loop is markedly expanded on an optimally annealed L1₀ phase at 800 °C for 60 min, showing a surface modified coercivity H_c=7.781 kOe with remnant ratio M_r/M_s=0.5564, and M_s=39.75 emu/g. Crystallites self-assembled in an acicular shape tailor large H_c from ideal single domains and high magnetocrystalline anisotropy of a hard magnet L1₀ phase.     

The electrodeposition behaviors and magnetic properties of Ni-Co films

Ni-Co films with different compositions and microstructures were produced on ITO glasses by electrodeposition from sulphate bath at 25 °C. Cyclic voltammograms give a result that the increase in the Co²⁺ concentration displaces Ni-Co alloy oxidation peaks to negative potential with high Co current distributions. It is observed that the content of cobalt in the films increases from 22.42% to 56.09% as the molar ratio of CoSO₄/NiSO₄ varying from 0.015/0.085 to 0.045/0.055 in electrolyte. XRD patterns reveal that the structure of the films strongly depends on the Co content in the deposited films. The saturation magnetization (M_s) moves up from 144.84 kA m⁻¹ to 342.35 kA m⁻¹ and coercivity (H_c) falls from 15.27 kA m⁻¹ to 7.27 kA m⁻¹ with the heat treatment temperature increasing from 25 °C to 450 °C. The saturation magnetization (M_s) and coercivity (H_c) move up from 340.97 kA m⁻¹ and 7.98 kA m⁻¹ to 971.58 kA m⁻¹ and 18.62 kA m⁻¹ with the Co content increasing from 22.42% to 56.09% after annealing at 450.     

Magnetic properties of cobalt substituted M-type barium hexaferrite prepared by co-precipitation

The co-precipitation and solid state methods were used in the synthesis of barium hexaferrite (BaM). Phase pure BaM was obtained with 1, 2, 3, 5, 10, 15, 20 and 30 wt% cobalt oxide (Co₃O₄). The addition of Co^2+/3+ ions to the BaM increased the permeability and magnetic loss tangent to a value of 3.5 at 5% and reduced to 1 at 30% doping. With increased Co doping, M_s was reduced from 87-58 emu/g, M_r increased from 11 to 40 emu/g with 3–5 wt% Co and 9 emu/g for 30% doping. H_c sharply increased from 540 to 2200 Oe with a reduction to 280 Oe at 10 K with increasing temperature to 300 K. T_c increased from 740 to 750 K for 30% Co doping. DTA–TGA studies of green body showed decarboxilation to occur at around 825 °C and the transformation of residual Co₃O₄ to Co₂O₃ at around 577 °C. The XRD data confirmed the Co ions substituting into Fe sites until a 10–15% doping level where the structure altered to W-type hexaferrite. The densities of the compounds varied with doping to a maximum of 4.45 g/cm³.     

BiFeO3/Zn1−xMnxO bilayered thin films

BiFeO₃/Zn_1−xMn_xO (x = 0-0.08) bilayered thin films were deposited on the SrRuO₃/Pt/TiO₂/SiO₂/Si(1 0 0) substrates by radio frequency sputtering. A highly (1 1 0) orientation was induced for BiFeO₃/Zn_1−xMn_xO. BiFeO₃/Zn_1−xMn_xO thin films demonstrate diode-like and resistive hysteresis behavior. A remanent polarization in the range of 2P_r ∼ 121.0-130.6 μC/cm² was measured for BiFeO₃/Zn_1−xMn_xO. BiFeO₃/Zn_1−xMn_xO (x = 0.04) bilayer exhibits a highest M_s value of ∼15.2 emu/cm³, owing to the presence of the magnetic Zn_0.96Mn_0.04O layer with an enhanced M_s value.     

High temperature ferromagnetism in cubic Mn-doped ZrO2 thin films

Theory has predicted that high temperature ferromagnetism (FM) should be found in cubic fake-diamonds, Mn-doped ZrO₂. Experimentally, it is shown that Mn-doped ZrO₂ ceramics are not ferromagnetic, but the nanosized Mn-doped ZrO₂ thin films grown on LaAlO₃ substrates can be ferromagnets with T_C above 400 K. The largest saturated magnetic moment (M_s) is huge as of about 230 emu/cm³ for the Mn_0.05Zr_0.95O₂ films, and it decreases as the Mn content increases. The intrinsic FM is strongly associated with the cubic structure of Mn-doped ZrO₂, and the Mn–Mn interactions via oxygen intermediates are important. No electrical conductivity is observed. Mn-doped ZrO₂ thin films can be truly considered as excellent candidates for spintronic applications.     

Growth temperature dependence of the hysteretic behavior of Ni0.5Zn0.5Fe2O4 thin films

Herein, a discussion of the effect of deposition temperature on the magnetic behavior of Ni_0.5Zn_0.5Fe₂O₄ thin films. The thin films were grown by r.f. sputtering technique on (1 0 0) MgO single-crystal substrates at deposition temperatures ranging between 400 and 800 °C. The grain boundary microstructure was analyzed via atomic force microscopy (AFM). AFM images show that grain size (φ∼70-112 nm) increases with increasing deposition temperature, according to a diffusion growth model. From magneto-optical Kerr effect (MOKE) measurements at room temperature, coercive fields, H_c, between 37and 131 Oe were measured. The coercive field, H_c, as a function of grain size, reaches a maximum value of 131 Oe for φ ∼93 nm, while the relative saturation magnetization exhibits a minimum value at this grain size. The behaviors observed were interpreted as the existence of a critical size for the transition from single- to multi-domain regime. The saturation magnetization (21 emu/g<M_s<60 emu/g) was employed to quantify the critical magnetic intergranular correlation length (L_c≈166 nm), where a single-grain to coupled-grain behavior transition occurs. Experimental hysteresis loops were fitted by the Jiles-Atherton model (JAM). The value of the k-parameter of the JAM fitted by means of this model (k/μ_o∼50 A m²) was correlated to the domain size from the behavior of k, we observed a maximum in the density of defects for the sample with φ∼93 nm.     

Structural, microstructural and magnetic properties of NiFe2O4, CoFe2O4 and MnFe2O4 nanoferrite thin films

The structural, microstructural and magnetic properties of nanoferrite NiFe₂O₄ (NF), CoFe₂O₄ (CF) and MnFe₂O₄ (MF) thin films have been studied. The coating solution of these ferrite films was prepared by a chemical synthesis route called sol-gel combined metallo-organic decomposition method. The solution was coated on Si substrate by spin coating and annealed at 700 °C for 3 h. X-ray diffraction pattern has been used to analyze the phase structure and lattice parameters. The scanning electron microscopy (SEM) and atomic force microscopy (AFM) have been used to show the nanostructural behavior of these ferrites. The values of average grain's size from SEM are 44, 60 and 74 nm, and from AFM are 46, 61 and 75 nm, respectively, measured for NF, CF and MF ferrites. At room temperature, the values of saturation magnetization, M_s∼50.60, 33.52 and 5.40 emu/cc, and remanent magnetization, M_r∼14.33, 15.50 and 1.10 emu/cc, respectively, are observed for NF, CF and MF. At low temperature measurements of 10 K, the anisotropy of ferromagnetism is observed in these ferrite films. The superparamagnetic/paramagnetic behavior is also confirmed by χ′(T) curves of AC susceptibility by applying DC magnetizing field of 3 Oe. The temperature dependent magnetization measurements show the magnetic phase transition temperature.     

The influence of substrate temperature and annealing on the properties of pulsed laser-deposited YIG films on fused quartz substrate

Yttrium iron garnet (YIG) thin films were deposited on fused quartz substrate at different substrate temperatures (T_s) varying from room temperature (RT) to 850 °C using pulsed laser deposition (PLD) technique. All the films in the as-deposited state were X-ray amorphous and non-magnetic at RT. The film deposited at RT after annealing at temperatures T_a?700 °C showed both X-ray peaks and the magnetic order. The films deposited at higher T_s (500–850 °C) and then annealed at 700 °C resulted in better-quality films with higher 4πM_s value. The highest value of magnetization was for the sample deposited at 850 °C and annealed at 700 °C, which is 68% of the bulk 4πM_s value.     

The multiferroic properties of Bi(Fe0.95Co0.05)O3 films

Bi(Fe_0.95Co_0.05)O₃ films were prepared on conductive indium tin oxide (ITO)/glass substrates by chemical solution deposition. Well saturated polarization hysteresis loop has been observed with a remnant polarization value of about 22 μC/cm² at room temperature. Weak ferromagnetism with saturation magnetization of about 3 emu/cm³ was observed at room temperature. The clear observation of both room temperature ferroelectric and ferromagnetic properties suggests the potential multiferroic applications of Bi(Fe_0.95Co_0.05)O₃.     

The influence of pH and bath composition on the properties of Fe-Co alloy film electrodeposition

Fe-Co films were electrodeposited on ITO glass substrates from the electrolytes with different molar ratio of Co²⁺/Fe²⁺ and different pH values (2.1, 2.9, 3.7, and 4.3) at 25 °C. The properties of Fe-Co alloy films depend on both Co²⁺ and Fe²⁺ concentrations in electrolyte and pH values was studied. The content of Co increases from 40% to 85% as the mole ratio of CoSO₄/FeSO₄ increasing from 0.50/0.50 to 0.90/0.10 in electrolyte and slightly decreases from 77% to 63% as the pH values increasing from 2.1 to 4.3. The X-ray diffraction analysis reveals that the structures of the films strongly depend on the Co content in the binary films. The surface morphologies of the films are influenced by the combined action of composition and phase structure. The saturation magnetization reaches a maximum value of 2974.03 emu/cm³ and coercivity reaches a minimum value of 42.72 Oe of the Fe_0.30Co_0.70. The saturation magnetization reaches a maximum values of 2974.03 emu/cm³ and coercivity reaches a minimum values of 42.72 Oe of the Fe_0.30Co_0.70 at pH = 2.9.     

Magnetic characterization of dual phase FeZrB soft magnetic alloy

The magnetic properties and the annealing process of Fe₇₈Zr₇B₁₅ amorphous ribbons are investigated by X-ray diffraction (XRD), differential scanning calorimetry, and vibrating sample magnetometer. The fully amorphous structure of the as-quenched ribbons is confirmed by the XRD pattern. The Curie temperature and the saturation magnetization M_s of the ribbons are 305 °C and 124.3 emu/g, respectively. Annealing at 550 °C can result in an increase in M_s with annealing time due to the increasing crystallized volume fraction of α-Fe phase. The optimized annealing process is established at 550 °C for 20-30 min with maximum M_s of 146.6 emu/g. The morphology of the ribbons annealed at 550 °C is observed by scanning electron microscopy, showing that nanocrystalline α-Fe grains are dispersed in an amorphous matrix.