Anchoring transitions with polar and non-polar nematic liquid crystals on incompletely oxidized silane substrates

The active oxygen gas arising from a plasma reactor is used to realize progressive chemical modifications onto silane coatings that could be particularly interesting as alignment layers for liquid crystal display applications. Depending on the oxygen density grafted onto the substrate, these alignment layers provide different zenithal anchoring angles, or pretilt angles, with anchoring transitions, for polar and non-polar nematic liquid crystals as 5CB and MBBA, respectively. The anchoring transitions are found to be smoother with the polar nematics. Such a behavior is discussed in terms of the differential wetting model by adding a cosine term to the interaction energy between the nematic and the substrate. A local justification is proposed for this symmetry breaking term. Received: 18 May 1998     

Liquid crystal orientation transition on microtextured substrates

A uniform alignment of liquid crystal (LC) with finite pretilt was observed on microtextured substrates that were lithographically fabricated with alternating horizontal and vertical corrugations. As the period of alternation was decreased toward 0.8 microm, the nematic LC alignment on these substrates changed from inhomogeneous in plane, copying the substrate corrugations, to a uniform configuration with a large pretilt of approximately 40 degrees. This transition is pertinent to a frustrated boundary wherein a lowering in the LC elastic energy due to spatial variation in the LC orientation compromises an increase in the surface anchoring energy. A model based on this idea demonstrates good agreement with the experiment. This result may open up a new arena for tailoring substrate characteristics for LC alignment.     

Theoretical model of the transition between C1 and C2 chevron structures in smectic liquid crystals

We present a study of the effect of weak anchoring on the transition between C1 and C2 chevron structures in smectic-C liquid crystals. The coexistence of C1 and C2 chevron structures within a single cell causes zigzag defects to occur and may affect the optical characteristics of the cell. By standard Euler-Lagrange minimisation of the total energy of the system, we obtain analytical expressions for the equilibrium director cone angle in the two chevron states. These in turn allow us to compare the total energies of the states and determine the globally stable chevron profile. We show that analytical predictions for the critical transition temperature, which depends on anchoring strength and pretilt angle, are in good agreement with those obtained numerically.     

Threshold and saturation properties of the field-induced twist cell with two parameters weak anchoring boundaries

On the basis of two-parameter formula of weak surface coupling anchoring energy of nematic liquid crystals proposed by Zhao et al recently, the general torque equilibrium equation and boundary conditions of the director have been obtained and the threshold field as well as the saturation field of the field-induced twist cell have been analysed for three kinds of configurations, i.e. homogeneous, splay and Pi cells formed by different rubbing conditions and pretilt angles. The results indicated that the polar anchoring has no effect on the threshold field. It is determined only by the twist anchoring and pretilt angle. But, the polar anchoring and twist anchoring are coupling with each other and have a great influence on the saturation field. The formulae for calculating the threshold field and saturation field are given. These results will be very useful in understanding surface physics and the design of liquid crystal cells.     

Near-Field Birefringence Response of Liquid Crystal Molecules in Thickness Direction of Liquid Crystal Thin Film Orientated by Shear Force

Information of molecular orientation in nematic liquid crystal （LC） is attractive and important for applications in the field of display devices. We demonstrate a novel method using a birefringence scanning near-field optical microscope （Bi-SNOM） with a probe which is inserted into the LC thin film to detect the molecular orientation from its birefringence responses in the thickness direction of the LC thin film. The probe is laterally vibrated when going forward into the LC thin film, and the retardation and azimuth angle are recorded as the probe going down. Firstly, the thickness of the LC thin film is measured by the shear force detection. Since the shear force acts as a stimulation to reorientate the LC molecules above the substrate surface, we can detect the molecular orientation caused by a polyimide alignment substrate and the effect to molecular orientation caused by vibration of fibre probe. As a result, the orientation profiling of the LC film in depth direction is obtained in both the cases that the direction of probe vibrating is vertical/parallel to the rubbing direction of the alignment film. Furthermore, the thickness of completely orientated layers just above the substrate surface can also be obtained by either vibrating probe or no-vibrating probe. Ultimately, the LC thin film can be modelled in thickness direction from all the results using this method.     

Azimuthal anchoring energy at the interface between a nematic liquid crystal and a PTFE substrate

The azimuthal anchoring energy of the nematic liquid crystal 4-pentyl-4'-cyanobiphenil (5CB) on a poly(tetrafluoroethylene) (teflon, PTFE) film is measured for the first time. The PTFE film is deposed using the Wittmann and Smith technique which consists on rubbing a bar of this polymer against a glass substrate at a controlled temperature and pressure. Measurements of the azimuthal anchoring energy are made with a reflectometric technique which provides high accuracy and sensitivity. The dependence of the azimuthal anchoring energy on temperature and on the rubbing pressure is investigated. The extrapolation length remains virtually constant in the whole temperature range of the nematic phase except for an increase of 25% close to the clearing temperature. The azimuthal anchoring energy is somewhat strong and increases with increasing the deposition pressure of PTFE. The observation of a relevant pre-transitional anisotropy of the reflection coefficients in the isotropic phase proves that the surface interactions favor an excess of orientational order. Ageing of the anchoring energy and gliding of the easy axis are experimentally observed. Both these phenomena suggest the presence of an anisotropic adsorbed layer of nematic molecules on the PTFE film.     

Influence of the flow on the anchoring of nematic liquid crystals on Langmuir-Blodgett monolayers studied by optical second-harmonic generation

The influence of capillary flow on the alignment of the nematic liquid crystal 5CB on fatty acid Langmuir-Blodgett monolayers was studied by optical second-harmonic generation (SHG). The surface dipole sensitivity of the technique allows probing the orientation of the first liquid crystal monolayer in the presence of the liquid crystal bulk. It was found that capillary flow causes the first monolayer of liquid crystal molecules in contact with the fatty acid monolayer to be oriented in the flow direction with a large pretilt (78 degrees), resulting in a quasi-planar alignment with splay-bend deformation of the nematic director in the bulk. The large pretilt angle also suggests that the Langmuir-Blodgett film itself is affected by the flow. The quasi-planar flow-induced alignment was found to be metastable. Once the flow ceases, circular domains of homeotropic orientation nucleate in the sample and expand until the whole sample becomes homeotropic. This relaxation process from flow-induced quasi-planar to surface-induced homeotropic alignment was also monitored by SHG. It was found that in the homeotropic state the first nematic layer presents a pretilt of 38 degrees almost isotropically distributed in the plane of the cell, with a slight preference for the direction of the previous flow. Received 8 November 2000 and Received in final form 12 March 2001     

液晶显示用取向材料聚甲基丙烯酸肉桂酰氧基乙酯的光控取向研究

通过实验研究了光聚合物材料聚甲基丙烯酸肉桂酰氧基乙酯（ＣＥＭＣ）的光化学反应过程, 以及对液晶材料ＬＣ－６７１０Ａ 的取向能力． 通过原子力显微镜（ＡＦＭ）观察了取向层表面在光化学反应前后的变化, 测量了光控取向膜液晶盒中液晶分子的预倾角及单面光控取向扭曲向列液晶显示器（ＴＮＬＣＤ）的电光特性和时间响应特性曲线, 研究了液晶分子排列取向的机理．     

Three-phase contact line energetics from nanoscale liquid surface topographies

We observed light-induced alignment of the nematic liquid crystal, 4, 4(')-n-pentylcyanobiphenyl (5CB), on a fused quartz. Irradiation of the adsorbed layer with polarized ultraviolet light produced homogeneous alignment in a 5CB-filled liquid crystal cell with the easy orientation axis perpendicular to the polarization direction. The measured anchoring energy increases with illumination up to 10(-4) erg/cm (2). Phase retardation and pretilt measurements confirmed near homogeneous alignment of the LC in a cell, while the polarization dependence of second harmonic generation suggested a near normal alignment of the adsorbed layer. We believe that light-induced rearrangement or phototransformation of the adsorbed layer causes the observed phenomenon.     

Ultraviolet-light-treated polyimide alignment layers for polarization-independent liquid crystal Fresnel lenses

The surface energy of a conventional homeotropic polyimide (PI) alignment layer was altered via ultraviolet (UV) light irradiation, and the pretilt angle of the PI was changed along with the surface energy. The surface energy can be controlled by either UV exposure time or irradiation intensity. A switchable liquid crystal Fresnel lens (LCFL) was created by the UV-treated alignment layers to form a Fresnel zone-distribution hybrid alignment, vertically aligned and hybrid aligned LC in the odd and even zones, respectively. The LCFL was made polarization-independent by circular buffing, and it had a diffraction efficiency of ∼22% at a low driving voltage of ∼1.2 V.     

Competition between anchoring and reversible photo-induced alignment of a nematic liquid crystal

We investigated the alignment induced on a nematic liquid crystal (LC) by a photo-aligned polymer film with azo-dye side groups. The orientation of the LC molecules can be manipulated in a reversible manner by irradiating the film with polarized light. We analyzed the competition between the orientation induced by the main chain, through rubbing of the film and that induced by the photo-aligned polymer. Anchoring strength for the different processing conditions are reported. The changes in film morphology caused by rubbing or photo-alignment could be captured by atomic force microscopy. The reversibility of the photo-induced alignment and the competition between the two anchoring mechanisms may allow recording and erasing of information in a LC display. PACS 61.30.-v; 61.30.Gd     

液晶表面锚定能的温度依赖性研究

通过测量扭曲液晶盒中的液晶分子的实际扭曲角及摩擦方向与液晶分子的界面指向矢之间的方位偏角，用自行建立的液晶方位表面锚定能的测量方法，测定了５ＣＢ液晶与摩擦的聚酰亚胺界面的锚定能及其温度依赖性，并用热力学理论进行了分析．实验结果表明，随着温度的增加液晶的表面锚定能Ｅ_ａ是减小的，从２５.５℃时的５.０×１０^－5Ｊ／ｍ²减小到３５℃时的５.０×１０^－6Ｊ／ｍ²；同时，外推长度ｄ_e随 关键词：     

Polar anchoring strength of a tilted nematic: confirmation of the dual easy axis model

The polar anchoring strength coefficient W and polar pretilt angle theta0 were measured simultaneously for the liquid crystal pentylcyanobiphenyl at a rubbed polyimide alignment layer that is ordinarily used for vertical alignment. It was found that W proportional theta(2)0 over the range 0 degrees < or =theta0 less or similar to 35 degrees . The results provide a confirmation of the dual easy axis model, wherein the liquid crystal director adopts an equilibrium orientation theta0 at the substrate that is determined by competition between a pair of preferred orientation directions.     

Dependence of viscoelastic parameters of nematic liquid crystals on pretilt angle and temperature

The viscoelastic parameters of nematic liquid crystal (LC) E7 in both splay and twist relaxation modes are investigated as functions of pretilt angle and temperature by the technique of dynamic laser light scattering. The results show that the elastic constants of the liquid crystal in the two modes not only depend on temperature, but also depend on pretilt angle. There is a critical pretilt angle (β_C) at which nematic LC begins exhibiting elastic property, and beyond which the elastic constants increase with pretilt angle, then keep constant after exceeding another angle (β_S, with β_S > β_C). This phenomenon is observed to be universal for different nematic LC’s, and significant not only in the understanding of the molecular mechanism of exhibiting viscoelastic properties in nematic LC, but also for their practical purpose.     

Deformation of a pretilted nematic liquid crystal layer in an electric field

The deformation of the optical axis of a nematic liquid crystal layer under the influence of an electric field is caused by the dielectric torque. This momentum counteracts with an elastic torque generated by interfacial forces between the surface of the electrode and the liquid crystal. By means of a variational analysis, the deformation profiles within the liquid crystal layer are calculated, assuming large interfacial energies and various angles of pretilt of the liquid crystal directors with respect to the electrodes. Both the extreme case of a homeotropic (vertical) alignment on one electrode and a homogeneous (parallel) alignment on the opposite electrode, as well as the general case of arbitrary and different alignments on both electrodes, lead to heavily pretilted liquid crystal layers, resulting in definite deformation profiles without disclinations. Liquid crystal cells prepared in this way neither show threshold voltages nor delay times when electrical fields are applied. Measured and calculated characteristics of such liquid crystal cells are presented, they show good agreement.     

Photoalignment of liquid crystals by cinnamate polyelectrolyte layer-by-layer ultrathin film

In this paper, a new layer-by-layer (LBL) ultrathin film with photosensitive cinnamoyl chromophores was prepared. It could induce uniform alignment of liquid crystals (LC) after irradiated by linearly polarized ultraviolet (LPUV) light. First, a photosensitive polycation containing cinnamoyl side groups was synthesized. Then a layer-by-layer ultrathin film was prepared in an aqueous solution of the polycations and poly (sodium 4-styrenesulphonate). The spectra of UV-vis absorption and ellipsometric measurement showed that the LBL film was uniform and suitable for the photoalignment of LC. When the film was irradiated by LPUV light, the cinnamoyl units in the film underwent [2 + 2] cycloaddition along the electric vector direction of the LPUV light. The polarized UV-vis spectra also proved that the film was anisotropic, and then the film could induce the homogeneous alignment of nematic LC. With the number of bilayers increasing, the alignment effect of multilayer film became better, and the contrast ratio became higher.     

Electro-optic characteristics as a function of pretilt angle in the optically compensated splay liquid crystal cell

Optically compensated splay (OCS) mode, where the liquid crystals (LCs) are almost homeotropically aligned with rubbed surfaces at parallel directions and a mid-director orients parallel to the substrate, was known to show a wide-viewing-angle due to self-compensation effect. The device requires a setting voltage and phase transition time in order for LC to have a transition from almost vertical alignment to the splay state. The setting voltage, transition time, and response time of the device as a function of surface pretilt angle were studied. The results indicate that with decreasing surface pretilt angle in the OCS cell, both phase transition time and setting voltage decrease and response time becomes faster.     

垂直定向液晶光阀中液晶电光特性的理论分析

采用 ４×４ 矩阵法模拟计算了垂直定向液晶光阀的电光特性, 从理论上分析了影响液晶光阀电光特性的因素。根据向列液晶的弹性连续体理论及边界力矩平衡方程, 求出了垂直定向向列液晶在液晶界面之间相互作用锚泊能为有限值时的液晶指向矢分布。根据指向矢分布计算了一定外加电场下液晶光阀的电光特性, 并和锚泊能为无限大时的特性进行了比较和分析     

聚甲基丙烯酸肉桂酰氧基乙酯的光化学反应在液晶分子排列取向中的作用

研究了光聚合物材料聚甲基丙烯酸肉桂酰氧基乙酯(CEMC)对液晶材料LC-6710A的取向作用,取向层表面在光化学反应前后的变化;测量了光控取向膜液晶盒中液晶分子的预倾角及单面光控取向扭曲向列液晶显示器(TNLCD)的电光特性和时间响应特性,研究了这种材料的光化学反应过程,以及液晶分子排列取向的机理.     

Critical exponents for Fréedericskz transition in nematics between concentric cylinders

The equilibrium tilt angle profile in a cell limited by two concentric cylinders filled with nematic liquid crystals is determined for strong homeotropic anchoring at the surfaces. The anchoring condition is such that the nematic director is perpendicular to the cylinder axes and a radial nonuniform electric field is applied to investigate a Fréedericksz transition. The distortions induced by the field remain in the plane perpendicular to the cylinder axes, and a threshold field is analytically determined indicating a transition from a pure splay to a splay-bend conformation of the director. It is shown that this transition can be induced by the thickness of the region between the two cylinders, and can be detected even in the absence of an external field. If the maximum value of the tilt angle is assumed as an order parameter, its behavior near to the transition can be used to obtain the critical exponent, which is the same as the one obtained in the mean field approximation. These results are indications that nontrivial consequences may occur when complex fluids are subject to non-planar geometries.