MXene与溶剂界面电子振动耦合现象的直接观测（英文）

作为一种新型的二维材料,MXene凭借其各种优异的物理化学性质已受到极为广泛的关注,例如其具有极其出色的光热转换效率.然而,人们对MXene的光热转换机制仍然知之甚少.本文通过结合飞秒可见和中红外瞬态吸收光谱技术,对分散在各种溶剂中MXene(Ti_3C_2T_x)纳米片内的电子能量耗散动力学进行了系统的研究.结果表明,MXene的激发态寿命在很大程度上取决于周围的溶剂环境.在MXene被超快激光泵浦后,可以直接观察到MXene纳米片与相邻溶剂分子之间的界面电子振动耦合现象.这些结果表明界面相互作用在MXene的超快能量传输动力学中起着关键的作用.这一发现可为二维体系光转换性能的改进提供了一条潜在可行的途径.     

半导体纳米颗粒/金属-有机骨架复合光催化体系中的位置效应

本文采用超快瞬态吸收光谱技术研究了“半导体/金属-有机骨架(MOF)”复合体系中的位置效应. 半导体TiO₂纳米颗粒被嵌入或担载于一种典型的MOF材料Cu₃(BTC)₂. 通过实时跟踪这两个复合体系中的电子动力学行为,发现半导体与MOF之间形成的界面态可作为高效的电子转移纽带,其效率与二组份的相对位置密切相关,从而导致这两个复合体系光催化CO₂还原的性能差异. 本文对“半导体/MOF”复合体系中界面电子转移行为和效应的机理进行了解读,为基于MOF材料的光电化学应用提供了有益的设计思路.     

六氟偏磷酸锂的热分解动力

采用在线耦合TGA-FTIR技术,分别研究了非等温和等温两种条件下六氟磷酸锂(LiPF₆)的热分解动力学和其气态产物. 结果表明LiPF₆分解反应为单步反应,其产物为固态LiF和气态PF₅. 在两种条件下,LiPF₆分解动力学均遵循基于柱坐标对称的二维相界面移动模型. LiPF₆分解活化能为104 kJ/mol(非等温)和92 kJ/mol(等温).     

A Surface Femtosecond Two-Photon Photoemission Spectrometer for Excited Electron Dynamics and Time-Dependent Photochemical Kinetics

搭建了一套研究金属和金属氧化物表面的超快激发态电子动力学和光化学动力学的飞秒双光子光电子能谱仪. 该装置将半球形电子能量分析仪和成像技术相结合,同时测量光电子的能量和角度分布.通过Mach-Zehnder干涉仪测量时间分辨的双光子光电子能谱获得超快激发电子态的动力学信息. 这一功能在Cu(111)上得到了证实. 另外还发展了一个通过实时测量双光子光电子能谱来研究表面光化学的方法,并成功应用到CH₃CH₂OH/TiO₂(110)体系. 研究表明,只有将两种方法结合起来才能正确地研究光诱导的表面激发共振的动力学.     

二羰基茂铁二聚体光反应产物的二维红外光谱

利用二维红外光谱研究了二羰基茂铁二聚体([CpFe(CO)₂]₂)在非极性溶剂CCl4中的平衡态光反应产物．时间分辨的二维红外光谱结果证实了一种可能的可见光驱动的光反应路径,其光反应产物为CpFe(CO)₂Cl,存在两个相互耦合的羰基基团,即对称和反对称羰基伸缩振动．这是主要的光产物,其光反应路径包括自由基形成以及氯加成过程．量化计算支持上述实验结果,结果表明,二维红外光谱方法可用来原位地检测凝聚相反应的化学物种的结构及其动力学     

4-硝基联苯酚三重态质子化和去质子化过程中瞬态物种的指认

近年利用超快光谱技术对于4-硝基联苯酚(HO-Bp-NO₂)的研究发现，其在单重态和三重态时均会发生光致质子耦合电子转移(PCET)反应. 其瞬态吸收光谱450 nm处有一个独特的尖锐吸收带，但无羟基取代的对硝基联苯(Bp-NO₂)未观察到此现象. 本文利用酸性溶液作为外加可控质子供体，通过在强酸(∽10^-1 mol/L)和弱酸(∽10^-4 mol/L)溶液中的光谱和动力学结果，指认这个新吸收带为开壳层单重态O-Bp-NO₂H. 它是HO-Bp-NO₂的互变异构体，由三重态HO-Bp-NO₂中硝基氧得质子后羟基快速去质子产生. 动力学分析表明，非质子极性溶剂中三重态HO-Bp-NO₂与基态母体间还会发生PCET或先质子后电子转移生成自由基·O-Bp-NO₂. 这一反应与O-Bp-NO₂H竞争，导致其产率较低. 这些结果阐明了三重态HO-Bp-NO₂在非质子极性溶剂中的失活机制.     

利用时间分辨的光电子影像技术研究2,6-二甲基吡啶分子锥形交叉超快动力学

利用时间分辨的飞秒光电子影像技术结合时间分辨的质谱技术,研究了2,6-二甲基吡啶分子锥形交叉超快动力学过程. 2,6-二甲基吡啶分子吸收266 nm泵浦光从基态跃迁至S₂态(π-π^*). 母体离子时间变化曲线包含两个指数函数,一个是时间常数为635 fs的快速组分,另一个是时间常数为4.37 ps的慢速组分. 通过时间分辨光电子影像得到的时间依赖的光电子角度分布和能量分辨的光电子谱分布提供了S₂态演变的动力学信息. 简言之,快速组分反映了通     

乙醇在TiO2(110)表面光催化解离的动力学和超快电子动态学 (cited: 2)

采用实时双光子光电子能谱和时间分辨双光子光电子能谱技术分别研究了乙醇在该表面光催化解离的动力学和超快电子动态学过程. 通过测量与乙醇光催化解离相关的电子激发态随时间的演化,发现这个反应满足分型动力学. 乙醇在还原性TiO₂(110)上的光催化解离比在氧化性表面快,这归结于缺陷的存在降低了反应能垒. 这样一个反应的加速过程很可能是与缺陷电子相关的. 通过干涉双脉冲相关的测量,得到了乙醇-TiO₂界面电子激发态的超快动态学. 与甲醇的情况类似,这个电子激发态的寿命为24 fs. 激发态的出现为TiO₂和它周围环境的电子转移提供了一个通道.     

热解法制备KY3F10: Yb, RE(RE=Er, Ho, Tm)纳米晶及其特性研究

有机染料和量子点等荧光标记材料存在发射光谱宽、 光热稳定性差和细胞毒性等缺陷, 限制了其在生物学研究中的应用. 镧系掺杂上转换发光材料不存在"自发荧光"和"光漂白"现象, 灵敏度高, 长期稳定性好, 利于活体检测. 论文首次采用热解法, 以油酸和十八烯为表面活性剂和溶剂, 制备了KY₃F₁₀: Yb, RE(RE=Er, Ho, Tm) 纳米晶. 研究了油酸含量对产物形貌和粒径尺寸的影响, 当油酸与十八烯的比例为3:1时, 为制备类球形单分散纳米晶体的最佳工艺条件, 在980 nm半导体激光器激发下, 样品KY₃F₁₀: Yb, RE(RE=Er, Ho, Tm) 分别发射出较强的黄绿、 绿色和蓝色光, 这些结果显示KY₃F₁₀: Yb, RE(RE=Er, Ho, Tm) 纳米粒子作为生物探针在多重荧光标记方面具有优异的特性.     

二维GaTe/Bi2Se3异质结：一类有潜力的Z型光解水催化剂

本文基于第一性原理方法，计算了二维GaTe/Bi₂Se₃异质结的电子结构、界面电荷转移、静电势分布、吸收光谱及光催化性质. 计算结果表明异质结是一个小能隙的准直接半导体，能有效捕获太阳光. 由于相对较强的界面內建极化电场和带边轻微弯曲，导致异质结中的光生电子和空穴分别有效分离在GaTe单层和Bi₂Se₃薄片上，可用于析氢和产氧. 这些理论计算结果意味着二维GaTe/Bi₂Se₃异质结是一类有潜力的Z型太阳能全解水催化剂.     

Harmonic Mode-Locked Er-Doped Fiber Laser by Evanescent Field-Based MXene Ti3C2Tx (T = F,O, or OH) Saturable Absorber

MXenes, as a legendary family of 2D van der Waals nanosheets materials, are extensively studied due to their unique characteristics of broadband nonlinear optical response. In particular, MXenes have excellent nonlinear optical properties of very large nonlinear absorption coefficients and very large nonlinear refractive indexes, which have attracted people's great attentions to study the application of MXenes in photonics, electronics, and optoelectronics in recent years. However, the high-repetition-rate (HRR) ultrafast pulses are not explored based on these kinds of materials. MXene Ti₃C₂T_x saturable absorber (SA) based on micro-fiber is fabricated by optical deposition method. Here, MXene Ti₃C₂T_x SA is used to achieve 36th harmonic mode-locking with a repetition rate of 218.4 MHz, a central wavelength of 1566.9 nm, the pulse width of 850 fs, and the spectral width of 3.51 nm. The maximum average output power and pulse energy are 6.95 mW and 0.032 nJ, respectively. This research based on MXene Ti₃C₂T_x light modulator opens a bright avenue for advanced nonlinear photonics.     

Investigation of Interfacial Charge Separation at PbS QDs/(001) TiO2 Nanosheets Heterojunction Solar Cell

In the recent years, the heterojunction solar cells based on quantum dots (QDs) have attracted attention due to strong light absorbing characteristics and the size effect on the bandgap tuning. This paper reports on the kinetics of interfacial charge separation of PbS QDs/(001) TiO₂ nanosheets heterojunction solar cells. PbS QDs are deposited using a bifunctional linker molecule on two different TiO₂ films, i.e., TiO₂ nanosheets (with 001 dominant exposed facet) and TiO₂ nanoparticles (with 101 dominant exposed facet). Upon bandgap excitation, electrons are transferred from the PbS QDs conduction band to the lower lying conduction band of TiO₂. Based on the ultrafast pump‐probe laser spectroscopy technique, the kinetics of charge separation is scrutinized at the PbS/TiO₂ interface. The interfacial charge separation at PbS/TiO₂ nanosheets films made of (001) dominant exposed facets is five times faster than that on (101) dominant exposed facets TiO₂ nanoparticles. The quantum yields for charge injection are higher for the (001) TiO₂ nanosheets than the (101) TiO₂ nanoparticles due to enhanced interfacial interaction with (001) surface compared to the (101) nanoparticles. The superior interfacial charge separation at PbS/(001) nanosheets respect to PbS/(101) nanoparticles is consistent with the higher photocurrent and enhanced power conversion efficiency in the PbS QDs/(001) TiO₂ heterojunction solar cell. The use of (001) TiO₂ nanosheets can be a better alternative to conventional mesoporous TiO₂ films in QD heterojunction solar cells and perovskites‐based heterojunction solar cells.     

Nb‐based MXenes for Li‐ion battery applications

Li‐ion batteries depend critically on the stability and capacity of the electrodes. In this respect the recently synthesized two‐dimensional MXenes are promising materials, as they combine an excellent Li‐ion capacity with very high charging rates. We employ density functional theory to investigate the impact of Li adsorption on the structural and electronic properties of monolayer Nb₂C and Nb₂CX₂. The Li ions are predicted to migrate easily on the pristine MXene due to a diffusion barrier of only 36 meV, whereas larger diffusion barriers are obtained for the functionalized MXenes. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Au/MXene based ultrafast all-optical switching

All-optical switches have arisen great attention due to their ultrafast speed as compared with electric switches. However, the excellent optical properties and strong interaction of two-dimensional (2D) material MXene show great potentials in next-generation all-optical switching. As a solution, we propose all-optical switching used Au/MXene with switching full width at half maximum (FWHM) operating at 290 fs. Compared with pure MXene, the Au/MXene behaves outstanding performances due to local surface plasmon resonance (LSPR), including broadband differential transmission, strong near-infrared on/off ratio enhancement. Remarkably, this study enhances understanding of Au/MXene based ultrafast all-optical switching red-shifted about 34 nm in comparison to MXene, validating all optical properties of Au/MXene opening the way to the implementation of optical interconnection and optical switching.     

SnS Nanosheets for 105th Harmonic Soliton Molecule Generation

As a member of the 2D group IV monochalcogenides (MX; M = Sn, Ge; X = S, Se), SnS has attracted great interest due to its outstanding optical, electrical, and optoelectronic properties. Especially, SnS nanosheets material have a large absorption coefficient and high photoelectric conversion efficiency, it can be potentially used in optical modulators, saturable absorbers, solar cells, supercapacitors, and other optical devices. However, the nonlinear optical properties of SnS nanosheets and their applications in ultrafast photonics are seldom studied. In this paper, the nonlinear optical properties of SnS nanosheets have been characterized through a dual‐balance detection system, whose modulation depth is 5.8%. More importantly, 105th harmonic soliton molecule based on SnS saturable absorbers has been realized for the first time to the authors’ knowledge. A compact mode‐locked fiber laser with a pulse duration of 1.02 ps and a repetition rate of 459 MHz is realized near 1.5 µm. It is demonstrated that SnS nanosheets have outstanding nonlinear properties and play an extremely important role in the field of ultrafast photonics.     

利用可见-近红外-中红外超快光谱揭示离子交换法制备的少层MoS2中缺陷介导的载流子动力学

本文结合可见-近红外-中红外瞬态吸收光谱技术对离子交换法制备的少层MoS₂中缺陷介导的载流子动力学进行了详细的解析. 在近红外瞬态吸收光谱中观察到的宽带漂白信号表明少层MoS₂纳米片带隙中分布着大量的缺陷态. 实验结果明确揭示了载流子被缺陷态的快速捕获以及进一步的复合过程，证明带隙中的缺陷态对MoS₂光生载流子动力学过程起着至关重要的作用. 在中红外瞬态吸收光谱中观察到的正信号到负信号的转变进一步证实了在导带下小于0.24 eV处存在被载流子占据的缺陷态. 这些在少层MoS₂纳米片中存在的缺陷态可以作为有效的载流子捕获中心来辅助光生载流子在皮秒时间尺度内完成非辐射复合过程.     

Ultrasound-assisted fabrication of Ti3C2Tx MXene toward enhanced energy storage performance

Ti₃C₂Tx MXenes are normally fabricated by removal of main group element from the corresponding transition metal carbides, and they have been actively studied due to their superior energy storage performance. However, the low efficiency in removal of main group element (named as chemical etching) has significantly limited the application of MXene or MXene-related materials. Herein, we demonstrated an ultrasound-assisted approach to synthesize Ti₃C₂Tx MXene material by using Ti₃AlC₂ as the precursor. The experimental results indicate that the efficiency of chemical etching of Ti₃AlC₂ was dramatically promoted by ultrasound. The etching time was greatly shortened to 8 h while typically 24 h is sufficient in dilute hydrofluoric acid. Particularly, the high etching efficiency was achieved by using 2% hydrofluoric acid under the aid of ultrasound, which is lower in concentration than those reported in the previous literature. The specific capacitance of the 8 h sonicated sample is 155F/g, which is much higher than that of the un-sonicated sample prepared under the same experimental conditions. Additionally, the specific capacitance retention of the prepared 8 h sonicated sample was 97.5% after 20,000 cycles of charging/discharging, exhibiting an outstanding energy storage stability compared with the materials reported in previous literatures. It was proposed that removal of AlF₃ from the surface of the etched particles was significantly promoted and the hydrogen bonds between the terminations of two different adjacent layers were broken by the acoustic cavitation effect of ultrasound.     

Ultrasonically prepared photocatalyst of W/WO3 nanoplates with WS2 nanosheets as 2D material for improving photoelectrochemical water splitting

A sonochemical treatment has been an emerged technique as an interesting method for fabricating different photocatalysts with unique photoelectrochemical (PEC) properties. This study investigated the PEC performance of WO₃ with WS₂ nanosheets as a 2D material before calcination (WO₃/WS₂-90) and after calcination (WO₃/WS₂-450) prepared with sonochemical treatment. The WS₂ nanosheets were prepared from a liquid exfoliation phase with few-layer nanosheets, approximately 6.5 nm in thickness. The nanosheets were confirmed by UV–Vis spectroscopy and atomic force microscopy. Further, XPS, RAMAN, and SEM-EDAX analyses indicated that, following calcination of the WO₃/WS₂ electrode, the WS₂ nanosheets initially transformed to 2D-WO₃. After depositing the WS₂ nanosheets on the WO₃, the photocurrent density increased substantially. The WO₃/WS₂-450 films after calcination showed a photocurrent density of 5.6 mA.cm⁻² at 1.23 V vs. Ag/AgCl, which was 3.1 and 7.2 times higher, respectively than those of the WO₃/WS₂-90 before calcination and pure WO₃. Mott-Schottky and electrochemical impedance spectroscopy analyses confirmed the fabrication of the WO₃/WS₂ photoanode after calcination. The deposition of WS₂ nanosheets onto pure WO₃ increased the donor concentration (24-fold), reduced the space charge layer (4.6-fold), and decreased the flat band potential (1.6-fold), which could all help improve the photoelectrochemical efficiency. Moreover, the incorporation of WO₃ with WS₂ nanosheets as a 2D material (WO₃/WS₂-450) enhanced the incident photon current efficiency (IPCE) by 55%. In addition, the applied-bias photon-to-current conversion efficiency of the WO₃/WS₂-450 films was approximately 2.26% at 0.75 V (vs. Ag/AgCl), which is 5.6 and 9 times higher, respectively than those of WO₃/WS₂-90 and pure WO₃.