基于DSP的电动汽车锂电池荷电状态估算的研究与实现

锂电池荷电状态(SOC)的准确估算是电动汽车能源管理的关键技术。为了提高锂电池SOC的估算精度,将无迹卡尔曼滤波(UKF)应用于锂电池SOC估算,以减小拓展卡尔曼滤波(EKF)简单线性化带来的误差。搭建电池检测系统的硬件平台,以TMS320F28335型数字信号处理器(DSP)为主控芯片(MCU),实现电压、电流、温度的检测及UKF算法,并设计了相关的电池测试实验。实验结果表明,UKF可以实时估算锂电池SOC,估算误差在4%以内,高于传统的拓展卡尔曼滤波(EKF)。     

一种基于简化电化学模型的锂电池互联状态观测器

锂电池正、负极固相浓度分布以及荷电状态的精确估计对于开发锂电池工作状态的实时监控算法,进而构建高效、可靠的锂电池管理系统具有重要意义.本文基于多孔电极理论和浓度理论,提出基于扩展单粒子模型的锂电池关键内部参数识别的优化模型和方法;在该电化学模型简化的基础上,提出一种基于H_∞鲁棒控制理论框架的锂电池新型双向互联观测器,可同时实现对锂电池正、负电极浓度及荷电状态的估计,并通过对比分析不同工况下的仿真结果和实验数据,对所提出的互联观测器性能进行了系统验证.结果表明：所设计的互联观测器能够准确预测锂电池的输出电压和荷电状态,有效提高了锂电池系统模型的动态性能和鲁棒稳定性,为锂电池管理系统的开发奠定了理论基础.     

最优控制在车载惯性平台稳定回路中的应用

在分析车载惯性平台数学模型的基础上,针对平台的扰动特性，提出了稳定伺服回路的一种改进型线性二次高斯 (LQG) 控制方法。该方法在反馈中加入了积分项，可以消除稳态偏差，并且依据滤波器收敛性的判据，分别利用Sage Husa自适应滤波算法和强跟踪Kalman滤波器进行状态估计,既保证了估计精度，又具有跟踪突变状态的能力。仿真和实验表明：该方法在一定程度上降低了对系统模型误差和噪声统计特性误差的要求。     

并联锂离子电池组的模型化与电流分配

近些年发表了大量关于消除串联电池组能量不均衡方法的文献。然而,关于电池性能的变化对并联电池组的影响的研究还比较少。为探索具有不同特性的电池进行并联联接时的影响,基于锂电池的戴维宁等效电路模型建立了并联电池组的数学模型。在此基础上,通过内阻差和容量差两种参数情况分析了并联电池组内电流分配的基本机制。为进行对比分析,选择了4个不同老化程度的锂电池以构建不同的电池组。采用非线性最小二乘法对模型的未知参数进行辨识,并利用MATLAB进行建模仿真比较。仿真实验结果表明,对于有不同老化程度电池的并联电池组,并联电池组内的电流会发生很大的变化,这可能导致更严重的不一致性问题并进一步加速电池老化。     

捷联式光学图像导引头视线角速率估计

为准确估计捷联导引头视线角速率,建立了捷联式光学图像导引头数学模型,根据弹目运动相对关系进行视线角速率估计算法研究。定义了估计算法所需坐标系并建立了导引头与陀螺数学模型;根据弹目相对运动学及姿态关系建立视线角速率估计非线性状态方程;针对滤波精度与实时性应用的问题,提出无迹Kalman滤波(UKF)方法估计视线角速率,并建立半物理实验系统进行算法验证,实验结果表明:视线角及视线角速率的最大估计误差分别为0.37°与0.68°/s,估计精度分别为0.1008°与0.2116°/s;数字信号处理器(DSP)中算法运行时间约为3.8ms,视线角速率估计算法同时能满足制导系统对精度与实时性的要求。基于UKF的视线角速率估计算法为捷联式光学图像导引头的工程应用提供理论依据。     

基于混合粒子滤波的水下小目标跟踪

针对水下小目标粒子滤波估计过程中“粒子贫化”引起的估计性能下降,提出了混合粒子滤波算法。该算法在常规粒子滤波算法基础上,在每一步迭代估计过程中进行量测的再次随机采样,以丰富随机粒子多样性,缓解水下小目标状态估计过程中的“粒子贫化”的影响。对算法进行了仿真分析,并将该方法用于水下小目标探测实验的数据处理,结果表明,相比于常规的粒子滤波算法,所提出的混合粒子滤波得到了误差更小且稳定的状态估计结果,有效地改善水下小目标跟踪的精度和稳健性。     

基于改进确定性采样滤波的疲劳裂纹扩展RUL预测

针对确定性采样滤波在进行状态估计预测时随维数增加时出现计算量增加且精度不高的问题,提出一种确定性采样滤波的算法并将其应用到疲劳裂纹扩展RUL预测当中去;首先,阐述了确定性采样滤波的基本原理;其次,从多维数值积分的角度分析确定性采样滤波所需计算的数学期望,根据完全对称积分公式计算积分节点值、节点个数和权重;最后,将改进后的确定性采样滤波器应用到构件疲劳裂纹损伤扩展中去,并与无迹卡尔曼滤波算法、容积卡尔曼滤波算法进行比较,提升了裂纹扩展RUL预测的精度,实例仿真分析验证了该方法的可行性和有效性。     

基于不敏粒子滤波的水中非合作磁性目标实时磁定位方法

针对水中非合作磁性目标的实时定位问题, 提出了一种基于不敏粒子滤波(unscented particle filter, UPF)的实时磁定位方法. 从非合作磁性目标的运动特征出发, 建立了状态空间模型, 利用UPF算法对目标状态进行实时估计. 为了提高系统的可观测性, 在算法迭代过程中对粒子状态进行约束及利用最小二乘法反演磁矩. 仿真与铁磁物体定位实验结果表明, 该方法的定位精度较高, 实时定位效果较好, 可用于近场实时磁定位问题中. 关键词： 磁定位 椭球体模型 状态空间模型 不敏粒子滤波     

鲸群优化的粒子滤波算法研究

针对标准的粒子滤波存在粒子贫化问题,提出了一种鲸群优化的粒子滤波算法。用粒子表征鲸鱼个体, 模拟鲸鱼群体搜寻猎物的过程,引导粒子向高似然区域移动。将粒子滤波中粒子的状态值作为鲸鱼群的个体位置,将粒子的状态估计转化为对鲸鱼群的寻优;通过鲸群的螺旋运动方式优化粒子的重要性采样过程,使粒子分布更加合理,对鲸群算法中的全局最优值引入最优邻域随机扰动策略,并在鲸鱼位置更新过程中加入自适应权重因子;选用一种典型的单静态非增长模型进行仿真测试。测试结果表明:提出的方法与传统的粒子滤波以及引力场优化的粒子滤波相比,在保证相同粒子数的前提下,算法的均方误差分别降低了28%和9%,证明了鲸群优化的粒子滤波算法具有更高的估计精度,并且在粒子数较少的情况下,可实现更准确的状态估计。     

基于强跟踪平方根容积卡尔曼滤波的纯方位目标运动分析方法

针对纯方位目标跟踪系统中模型状态简化、系统噪声统计特性未知、目标初始距离信息不准确导致的滤波收敛时间长和滤波精度不高的问题,以自主水下机器人(Autonomous Underwater Vehicle, AUV)跟踪水下动态目标为例,提出了一种基于强跟踪平方根容积卡尔曼滤波器(Strong Tracking Square Root Cubature Kalman Filter, STFSRCKF)的纯方位目标运动分析算法。该算法在滤波过程中,利用平方根容积卡尔曼滤波器(Square Root Cubature Kalman Filter, SRCKF)完成预测更新,对于SRCKF中的每个容积点采用强跟踪滤波器(Strong Tracking Filter, STF)进行更新,设计滤波增益以抑制噪声对系统状态估计的影响,有效提高了滤波的数值稳定性,减小了状态估计误差。通过仿真分析,比较了扩展卡尔曼滤波器(Extended Kalman Filter, EKF)、无迹卡尔曼滤波器(Unscented Kalman Filter, UKF)、平方根容积卡尔曼滤波器(Square-Root Cubature Kalman Filter, SRCKF)、STFSRCKF的算法性能,实验表明所提算法具有跟踪速度快,精度高等优点。     

基于Simulink的锂电池建模仿真

针对锂离子电池SOC(荷电状态)难以估算的问题,通过对电池建立等效的Thevenin电路模型,对不同时刻的SOC的模型参数进行拟合得到动态的模型参数,在Matlab中借助Simulink建立仿真模型,采用模块化结构,建立基于卡尔曼滤波算法的电池SOC估算系统;利用测得的电池电压电流,仿真系统可直接估算出实时的电池SOC,与实际的电池SOC对比,误差保持在2.5%以内,表明该方法可以有效地估计电池的SOC,对于锂离子电池在实际应用的容量估算有着重要意义。     

State Estimation of an Underwater Markov Chain Maneuvering Target Using Intelligent Computing

In this study, an application of deep learning-based neural computing is proposed for efficient real-time state estimation of the Markov chain underwater maneuvering object. The designed intelligent strategy is exploiting the strength of nonlinear autoregressive with an exogenous input (NARX) network model, which has the capability for estimating the dynamics of the systems that follow the discrete-time Markov chain. Nonlinear Bayesian filtering techniques are often applied for underwater maneuvering state estimation applications by following state-space methodology. The robustness and precision of NARX neural network are efficiently investigated for accurate state prediction of the passive Markov chain highly maneuvering underwater target. A continuous coordinated turning trajectory of an underwater maneuvering object is modeled for analyzing the performance of the neural computing paradigm. State estimation modeling is developed in the context of bearings only tracking technology in which the efficiency of the NARX neural network is investigated for ideal and complex ocean environments. Real-time position and velocity of maneuvering object are computed for five different cases by varying standard deviations of white Gaussian measured noise. Sufficient Monte Carlo simulation results validate the competence of NARX neural computing over conventional generalized pseudo-Bayesian filtering algorithms like an interacting multiple model extended Kalman filter and an interacting multiple model unscented Kalman filter.     

Design of Nonlinear Autoregressive Exogenous Model Based Intelligence Computing for Efficient State Estimation of Underwater Passive Target

In this study, an intelligent computing paradigm built on a nonlinear autoregressive exogenous (NARX) feedback neural network model with the strength of deep learning is presented for accurate state estimation of an underwater passive target. In underwater scenarios, real-time motion parameters of passive objects are usually extracted with nonlinear filtering techniques. In filtering algorithms, nonlinear passive measurements are associated with linear kinetics of the target, governing by state space methodology. To improve tracking accuracy, effective feature estimation and minimizing position error of dynamic passive objects, the strength of NARX based supervised learning is exploited. Dynamic artificial neural networks, which contain tapped delay lines, are suitable for predicting the future state of the underwater passive object. Neural networks-based intelligence computing is effectively applied for estimating the real-time actual state of a passive moving object, which follows a semi-curved path. Performance analysis of NARX based neural networks is evaluated for six different scenarios of standard deviation of white Gaussian measurement noise by following bearings only tracking phenomena. Root mean square error between estimated and real position of the passive target in rectangular coordinates is computed for evaluating the worth of the proposed NARX feedback neural network scheme. The Monte Carlo simulations are conducted and the results certify the capability of the intelligence computing over conventional nonlinear filtering algorithms such as spherical radial cubature Kalman filter and unscented Kalman filter for given state estimation model.     

基于Riccati方程和LMI算法的H∞控制器的设计与实现

H∞控制是一种重要的鲁棒控制方法,它以H∞范数作为控制性能指标,是一种最优控制方法,目的是求出系统内部稳定的控制器,使闭环传递函数的无穷范数极小,达到控制的目的。以固高公司的直线一级倒立摆为控制对象,实现基于Riccati方程和LMI算法的H∞控制器设计,采用M文件及simulink实现系统建模、控制器的设计,完成系统算法的验证,实验表明,控制器的输出、倒立摆系统的状态变量变化平稳,系统具有较强的鲁棒性,系统表现出良好的动态品质,验证了H∞控制器的有效性。     

Ternary-material lithium-ion battery SOC estimation under various ambient temperature

Ambient temperature produces great effects on battery state-of-charge (SOC) estimation, due to the unstable estimation algorithm, the weakened traceability of battery model, and variable model parameters at various temperatures, especially lower temperatures. The widely used method based on the equivalent circuit model (ECM) offline in using different algorithm, like current integral, the extended Kalman filter (EKF), or the unscented Kalman filter (UKF), can obtain an accurate SOC estimation at room temperature, but it is difficult to guarantee the high precision at lower temperatures. To address this problem, the battery model is investigated at different temperature, and an offset item is proposed to develop the observer equation in the estimated model. Then, the square root of the Sigma points Kalman filter (SR-UKF) is applied, and on the basis of the individual model parameter-temperature table and the developed model, the high accuracy of SOC estimation is achieved. Additionally, considering the burden of original parameter modification (all model parameters modified) at various temperature which will increase the product cost and computational complexity of the battery management system (BMS), the relationship between individual model parameter and the error of SOC estimation is built, which is helpful for the simplification of parameter modification. The results indicate that the proposed method based on the developed estimated model and the simplified parameter modification can achieve an accurate, stable, and efficient SOC estimation.     

改进的CS-UKF加速度方差自适应跟踪算法

针对基于当前统计模型的状态噪声协方差阵中的加速度方差调整方法对一般机动目标、非机动目标跟踪精度差的问题,研究其改进方法;在建立机动目标当前统计模型离散状态方程和雷达导引头离散观测方程的基础上;利用雷达导引头测量信息和位置预测值之间的扰动对加速度方差进行调整,提出了改进的加速度方差自适应调整无迹卡尔曼滤波跟踪算法;数字仿真验证了该算法对非机动目标、一般机动目标以及高机动目标均具有良好的跟踪效果。     

Sampling strong tracking nonlinear unscented Kalman filter and its application in eye tracking

The unscented Kalman filter is a developed well-known method for nonlinear motion estimation and tracking. However, the standard unscented Kalman filter has the inherent drawbacks, such as numerical instability and much more time spent on calculation in practical applications. In this paper, we present a novel sampling strong tracking nonlinear unscented Kalman filter, aiming to overcome the difficulty in nonlinear eye tracking. In the above proposed filter, the simplified unscented transform sampling strategy with n+2 sigma points leads to the computational efficiency, and suboptimal fading factor of strong tracking filtering is introduced to improve robustness and accuracy of eye tracking. Compared with the related unscented Kalman filter for eye tracking, the proposed filter has potential advantages in robustness, convergence speed, and tracking accuracy. The final experimental results show the validity of our method for eye tracking under realistic conditions.     

基于改进确定采样型滤波的疲劳裂纹扩展预测

针对确定性采样滤波在进行状态估计预测时随维数增加时出现计算量增加且精度不高的问题,提出一种确定采样型滤波的算法并将其应用到疲劳裂纹扩展预测当中去。首先,阐述了确定采样型滤波器的基本原理;其次,从多维数值积分的角度出发,引入完全对称积分公式,根据不变容积法则选取容积节点作为基础采样点,计算积分节点、节点个数和权重;最后,将改进后的确定采样型滤波器应用到构件疲劳裂纹损伤扩展中去,并与无迹卡尔曼滤波算法、容积卡尔曼滤波算法进行比较,提升了裂纹扩展预测的精度,仿真分析验证了该方法的可行性和有效性。